Used Spindle Stroke Press for sale (27,266)

Year of construction: 1997, condition: used, Technical details: pressure: 250 t stroke: ca. 400 mm pass through width: 640 mm table above floor: 900 mm ram stroke speed: regulierbar/adjustable passage between the side columns: 470 mm table clamping surface LxW: 570x550 mm Bodpfx Aju Nfn Rsdhelp clamping area of ram: 570x550 mm total power requirement: 56 kW weight of the machine ca.: ca. 9,0 t dimension machine xH: 2,5x1,8x3,8 m transport dimensions LxWxH: 2,6x1,8x3,1 m - control manual and via automatic via SPS Allen Bradley - one hand and two hand control - ram guidance column, zero backlash - set up mode and automatic mode via SPS controlled - light curtain type "Sick" and safety curtains installed - no CE certification available i.D. *

Condition: used, Year of construction: 1991, Technical details: Blsdpfx Aju Nfp Iodhop pressure: 40 t daylight dimension : table/slide up: 450 mm throat: 375 mm ram stroke: max. 300 mm Table dimensions: 900 x 500 x 85 mm passage inside table: Ø 120 mm height over floor: 900 mm total power requirement: 15,0 kW weight of the machine ca.: 5,8 t dimension machine xH: 2,3 x 1,45 x 2,40 m further technical data: -size of the ram plate W: 900 x D: 500mm -pivot hole in ram Ø 40 x 75mm -Hydraulics: tank capacity approx. 500Liter; operating pressure 275 bar; pump capacity 22,9 l/min. Two-hand operation and/or control panel *

Condition: used, Technical details: Pressure: 2,3 t stroke: 280 mm throat: 155 mm max. ram stroke: Vorlauf: 0,08 m/sec daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: max. 355 mm clamping plate on table: 280 x 280 mm passage opening in table: Ø 100 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm Blsdsu Nfwlopfx Adhop height over floor: 725 mm total power requirement: 1,1 kW weight of the machine ca.: 0,5 kg dimension machine xH: 0,6 x 0,7 x 1,6 m Press with mechanical 2-hand operation. Pressure test up to 2,3to performed. Good condition. *

Condition: used, Technical details: pressure: 250 t stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m - two hand control - operation panel Bedpou N Ddwofx Adholp accessory: - foot plate 2200x1500x40mm *

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm Bsdpfsu N A Uuox Adhslp - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *

Condition: as good as new (ex-display), Year of construction: 2026, Swivel spindle: Yes 0 to 45° Height adjustment: handwheel / electric Swivel adjustment: Handwheel / electric Milling jaw adjustment: manual Height display: Digital display Swivel angle display: Digital display Milling stop indicator: mech counter Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg Bledpjuzkxxefx Adhep

Condition: used, Technical details: pressure: 63 t throat: 315 mm ram adjustment: 60 mm adjustment of stroke: 70 mm ram stroke: 10 - 105 mm no. of strokes: 71 - 140 Hub/min strokes per minute: Einzelhub: 45 / 50 Hub/min. passage between the side columns: 355 mm dayligth: 335 mm table:: BxT: 800 x 630 mm passage opening in table: 400 x 130 mm clamping plate: BxT: 616 x 85 mm clamping surface ram: BxT: 450 x 280 mm mortise hole in ram: Ø 50 x 83mm mm total power requirement: 7,5 kW weight of the machine ca.: 5,9 t dimensions electric cabinet LxWxH: 0,86 x 0,30 x 1.3 m dimension machine xH: Presse: 1,42 x 1,8 x 2,6 m Press with roll feed/strip system and straightener High-performance press with roll feed/strip system and straightening machine Application: suitable for series production Equipped with servo roll feed MINI: refurbished until 01/2021 -manufacturer P/A GmbH, type SRF 220 -for strip width 220mm -feed rate 150m/min. -operation with hand tool straightening system: -manufacturer Wanzke, type KS 150 -insertion width max. 200mm -2 pieces driven inserting rolls -4 pieces driven straightening rolls (top), adjustable vertical approx. 30mm -5 pieces driven straightening rolls (bottom), fixed, not adjustable Coil = special design: -mechanical/manual -external take-up max. Ø 1.500mm -internal take-up max. Ø 300mm -width max. 200mm Roller deposit: -roller system with 9 pieces of roller bars with 53 rollers (Ø 25x25mm). Bledpfx Ajvt Nvpsdhsp *

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3595, Ladies and Gentlemen, We are selling a Weiler Commodor B lathe built in 2001 with Heidenhain 3-axis digital readout. The machine has been extensively overhauled in our workshop. Among other things, the main spindle bearing and the lead/traction spindle bearing were completely renewed! Technically, geometrically and visually, the machine is in excellent condition, which you are welcome to see for yourself on site. Availability: on request Machine no. 3595 Year of construction: 2001 Center height: 180mm Center width: 1000mm spindle passage: Ø 56mm max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4kW Dimensions: approx. 2.2x1.5x1m (LxHxW) Weight: approx. 1.8t Further equipment and accessories: 3-axis digital display, coolant device, chuck guard, pull-out chip tray, 3-jaw chuck Röhm, 4-jaw chuck Röhm, various clamping jaws... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice Blodpfethd Shex Adhjp E00f3g2rl - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor Bledpfxotnz Hbo Adhop gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: excellent (used), Year of construction: 2001, pressure 100 t table length 2000 mm table width 1580 mm Blsdpfx Adeucgqwohsp voltage 400 V max. table loading capacity 10.000 / 20.000 kg total power requirement 18 kW weight of the machine ca. 22 t dimensions of the machine ca. 5,65 x 2,95 x 5,85 m Serial no: 03.246.00 max. Distance between columns (width) 1620 mm d upper table no swiveling 10t / swiveling 6t d lower table 22t

Condition: reconditioned (used), Overhauled and newly painted. The images are example photos of similar machines and are intended to show the design and quality of the overhaul. All wear parts are replaced. Filter cloths are new. 1 year warranty on the filter press, excluding wear parts. Plate size: 630 x 630 mm Dimensions: approx. 2900 x 1100 x 1500 mm Chamber depth: 25 mm Volume: 312 liters Operating pressure: 12 / 15 bar Feed inlet: flange 2”, center Number of plates: 40 plates Plate material: polypropylene Cloth material: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filtrate trough + drip tray in plastic Motor hydraulics with single-acting cylinder. Optional: double-acting cylinder, which retracts the heavy pressure plates. With the single-acting cylinder, the operator must push the pressure plates back manually. Bjdpfjnh Nr Isx Adholp Optional: filling pump as a piston diaphragm pump or compressed air diaphragm pump. If the plate size, number of plates, or other features do not meet your requirements, we can offer corresponding modifications!

Condition: used, Year of construction: 2014, for sale Machine types + quantity: - 1 unit: Linear transport system for 14 stations, type: LT-14-270 (original from sp280) - 1 unit: Automatic loading station - 1 unit: New infeed station - 1 unit: Double spiral mixer + power box, type: W240A, no.: 7402-978 - 1 unit: Dough return station - 1 unit: Lift-tilt unit, type: HK1200 - 2 units: 2 mixing bowls, type: W240A Blsdpfx Adennz Hwjhsp - The frames and platforms for this line - 1 unit: 1 weighing hopper - 1 unit: 1 screw feeder - Power box - The small parts you need for the line Inspecting the line is possible on-site. If you have any questions or comments, please do not hesitate to contact us. The seller will carefully load all goods into the container/truck. The buyer will be responsible for arranging the transportation. Sincerely, Leo Holland

Condition: good (used), Obel Pedersen High-frequency continuous belt press Bledpfx Aedybr Rjdhop Opel-Pedersen press, type 2412 Press length 2500 mm, width 600 mm with glue application system, stacking table, HF generator T20 V and water cooling System has been dismantled.

Condition: used, Layher AR Base Jacks – Adjustable base for system scaffolding Used Layher AR base jacks for the stable and level installation of Layher Allround scaffolding. The jacks allow for height adjustment and are suitable for use on various surfaces. The robust steel design is suitable for intensive professional use in construction, renovation and industry. 🔧 Specifications Brand: Layher Type: Allround system Material: Steel Condition: Used Design: Fixed and tilting Available variants: 0.48 m – fixed model 0.60 m – fixed model 0.60 m – coarse thread Tilting base jacks – various designs ✅ Advantages Provides a stable base for the scaffolding Simple height adjustment and leveling Suitable for uneven surfaces Robust design for intensive use Blsdpfx As Aav Ufedhjp Coarse thread for quick adjustment Available in various designs Application Suitable as an adjustable base support for system scaffolding. The base jacks are used to compensate for height differences and to ensure that the scaffolding is installed stably and level.

Condition: excellent (used), Year of construction: 2013, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 24480, input voltage: 400 V, The Amandus Kahl flat die pellet press, type 37-850, is a robust industrial machine manufactured by the German machine builder Amandus Kahl for the compaction of various materials. Key technical data (type 37-850) Bledsz I Tktjpfx Adhop • Die diameter: 850 mm • Roller diameter / width: 350 mm / up to 130 mm • Number of roller rolls: 4 pieces • Roller speed: approx. 2.5 m/s • Drive motor power: 132 (at 1500 min⁻¹)

Condition: used, CNC press brake WEINBRENNER, type EGP 80 Die-bending machine (DEFECTIVE) Serial No. 1257G, Year of manufacture 1991 Pressing force 80 tons Working length 1300 mm Stroke 260 mm with Cybelec DNC 94 PS control system with back gauge Own weight 8800 kg without tools, tooling system probably TRUMPF Machine is not functioning, control system does not boot up. The parameters are likely lost. Bjdpfsz A Ia Sex Adhjlp Weight 7300 kg (on the nameplate) Weight 8800 kg (weighed on the crane) in good condition

Year of construction: 1977, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 6082, S.A. Central Adams Heavy Duty Press & Pump (Made in Italy / Milano) Heavy-duty industrial press complete with hydraulic pump unit. Previously used within a manufacturing environment and now surplus to requirements following equipment changes. Specification: Manufacturer: S.A. Central Adams Blodpfsz Nkuasx Adhjp Model: MTE 84 EXS0-D Heavy-duty industrial construction Hydraulic press and pump assembly Suitable for workshop, engineering, fabrication, manufacturing and maintenance applications Condition The machine was operational when last in use but is being sold as surplus equipment. Due to its age and the nature of industrial machinery, it is sold as seen without warranty. Buyers are welcome and encouraged to inspect prior to bidding. Collection: Collection only due to size and weight. Forklift loading may be available by prior arrangement. Located in Edenbridge, Kent, TN8 6HL, England Important Sold strictly as seen. Viewing welcomed. Please contact for further information, dimensions or additional photographs. This is a substantial industrial machine and represents an excellent opportunity for workshops, engineers, machinery dealers or refurbishment specialists. Keywords: Hydraulic Press, Workshop Press, Industrial Press, Engineering Machinery, Manufacturing Equipment, Fabrication Equipment, Heavy Duty Press, Hydraulic Pump Unit, Factory Machinery., Factory Machinery.

Condition: good (used), Year of construction: 1991, Used Darley press brake Type EHP 50 20 15 Capacity 2050 x 50 tons Delem control system Bljdpfxsz N Exgo Adhsp Y1, Y2, and X-axis CNC Includes a set of tooling

Condition: used, Year of construction: 1974, pressure 075 t throat 380 mm stroke 16- 140 mm number of strokes - idle run 105 /min shut height (stroke down, adjustm. up) 260 mm ram adjustment 80 mm table surface area 750 x 640 mm ram surface 500 x 200 mm Blsdpfxez N Hu Ne Adhjp hole in the table 150 mm table height over floor 800 - 920 mm total power requirement 7 kW weight of the machine ca. 4 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m Machine has an adjustable table and air operated clutch and brake.

Condition: used, Münch RMP 660 pellet press for the production of wood pellets and biomass pellets from sawdust, wood shavings and other organic waste materials. The machine is suitable for industrial pellet production, offering high pressing capacity and consistent pellet quality. Ideal for wood processors, sawmills and biomass plants. Technical data: - Screen: 6 mm - Motor: 2 x 90 kW Bjdpfx Adszryyrehjlp - Inner diameter of die: approx. 660 mm - Number of press rollers: 2 - Pressing capacity: up to approx. 3–5 t/h

Condition: used, Heavy-duty hydraulic hole-press, perforated panel press or gluing press for gluing or securing workpieces such as frames, panels, windows or doors. Blsdpfxezryy So Adhjp Technical data: - Cylinders: 6 - Hold-down units: 3 - Pressing area: 260 x 145 cm

Condition: used, Year of construction: 1983, nominal force 2500 t stroke 600 mm cycle time 13 - 18 s distance between columns 1720 mm Bljdpfxozrpulj Adhep Distance table/ram, max. stroke up, adjustment up 2600 mm table surface area 1720 x 1800 mm allowed max. force 4000 t blow die to die 5000 t ram surface 2100 x 1320 mm capacity of ejector in table 40 t ejector stroke in table 250 mm ejector surface area in table 900 x 820 mm capacity of ejector in ram 6 t ejector stroke in ram 40 mm spindle diameter 425 mm power requirement 900,0 kW weight 335,0 t Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m height over floor 8,3 m fully automated forging line / spindle press with automation for the production of flanged shafts for hot forming only with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication cycle time approx. 13 - 18 s as is where is, WITHOUT putting into operation

Condition: used, Paper drilling machine, Hang 106 DTK4, 4-spindle drilling machine, with various drill bits, 2 different speeds. In good condition. Blsdpfx Adjzwdg Tshep If you are interested, we would also be happy to provide you with information about other machines in our inventory. You are welcome to inspect the machine at our facility, by prior appointment.

Year of construction: 2023, condition: used, Hydraulic Press Manufacturer: PROZAP Type: EK0 Bushing Assembly Year of manufacture: 2023 Control system: Siemens Technical data: - Pressing force: 53 t - Stroke: 300 mm - Pneumatic system pressure: 6 bar - Maximum pneumatic supply pressure: 10 bar - Hydraulic system pressure: 255 bar - Dimensions (HxWxD): 3,200 x 2,500 x 2,350 mm - Weight: 8,000 kg In our assessment, the bushing press is in mint condition. Technical features: - Press-fitting of bushings, including plastic deformation - TOX pneumatic-hydraulic actuator with 53 t pressing force at 6 bar Blodpezbvm Iefx Adhjp - 300 mm stroke Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, total length: 4,600 mm, total width: 1,800 mm, total height: 2,780 mm, Year of manufacture: 1989 Colour: Beige Weight: 13.000 kg - Year: 1989 - Serial number: 121068 - Drive system: CNC - Control system brand: Delem - Control system type: DA-24e - Power [kW]: 15.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 200 - Max. working width [mm]: 3100 - Column gap [mm]: 2650 - Backgauge depth [mm]: 800 - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes Bedpfxjz Rzqhs Adhslp - Transport dimensions: 4600mm x 1800mm x 2780mm (l x w x h) - Transport weight [kg]: 13000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum