Used Stephen Zack Separator Systems for sale (36,490)

Year of construction: 2013, condition: used, Goudsmit rotary magnetic separator Article number: SCRZ2020018 Year of manufacture: 2013 Excludes rotor with magnetic bars (can be supplied by the manufacturer Goudsmit magnetic systems) Dimensions: 200mm x 200mm Prjdpsxc Ew Defx Ah Usf See our other ads VMA Wekerom

Year of construction: 2025, condition: new, The Zig-Zag Air Separator by Koltex Plastic Recycling Systems enables efficient separation of bulk materials into fractions with different densities. The material to be separated is fed into the device via a rotary valve, ensuring even distribution across the entire cross-section of the separation channel. Pedpfx Aevmxvfjh Usrf Sorting is carried out using an upward airflow generated by a high-performance blower. The air flows through the separator channel, lifting lighter particles while heavier fractions fall downward due to gravity. The specially designed Zig-Zag channel forces the material to pass through the airflow multiple times at each turn. Lighter fractions are effectively lifted and discharged through the top airflow, while heavier particles remain and fall, ensuring precise and efficient separation. The separator is equipped with advanced dust extraction cyclones with filters that eliminate dust emissions throughout the process. This ensures not only high separation efficiency but also environmental safety and workplace cleanliness. Koltex Plastic Recycling Systems also offers high-quality shredders, which can be integrated at the start of the process to create a complete grinding line with the separator. This solution enables comprehensive material processing, from shredding to precise separation, providing full control over the recycling process.

Condition: used, Compressed Air Dryer PARKER HIROSS for Compressor Systems Mechanical Condensate Separator, Water Separator Refrigeration Dryer with water-cooled aftercooler for removal of water vapor and cooling of compressed air or gases. 1 unit Aftercooler Type WFN009 DHH16 Air flow rate (standard): 540 m3/h = 9,000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1,020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1,030 x 850 x 200 mm + 1 unit Water Separator Type CSP 008 Standard flow rate: 480 m3/h = 8,000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" Predpodzqn Uofx Ah Uof - Filter housing made of aluminum + 1 unit Mechanical Condensate Separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss All components assembled as shown in the photos Mounted height (upright): 2,000 mm Total weight approx. 40 kg 2 identical units available

Year of construction: 2005, condition: ready for operation (used), Zig-zag fine material separator Cross section: approx. 500 / 300 mm For the separation of fines from the regrind Equipment: Pedpfx Asf Rlc Doh Uorf 2x rotary valve type NU 250 With Vulkollan seal, each 0.37 kW, 1x material conveyor blower type MFT 75/500, 11 kW

Condition: excellent (used), Year of construction: 2012, Reading Bakery Systems Low Pressure Extruder 2012, Stainless, accurate production of a wide range of products including pretzels, shapes, sticks, braids, sushki, and other co extruded products, touch screen controls, twin hopper, efficient and precise dough forming, consistent and accurate piece weights, quick and easy product changeover, jacketed extrusion housing for temperature control, lightweight plastic hoppers for easy sanitisation, bandcutter operates 275 cuts per min or in a cycle mode up to 50 cpm, capable of 1500Kgs per hour, mobile, with pallet of spares, 3Ph Podex Edfxepfx Ah Usrf

Condition: excellent (used), REF: MM5767 1 x Adpak Machinery Systems Ltd stainless steel flow wrapper fitted with an ICE Zodiac Hawk thermal transfer printer and a fixed folding box. Model - GSP 65. Date of manufacture - 2009 approx, refurbished by Midas Motion in 2020. Prsdeulc Sqopfx Ah Uef Sealing jaws - 300mm long. Fixed folding box - 40mm wide. Came out of production in 2023, this unit was previously used to individually wrap ice lollies.

Condition: good (used), Converter module -Type: S 909 -Number: 2x module converters available Predpfx Ajb A Hv Sjh Ujf -Price: per piece -Weight: 6.3 kg

Condition: ready for operation (used), Accu-Sort-Systems 45L Laser Barcode Scanner, serial no. according to photo, used, normal signs of wear, 100% functional, scope of delivery according to photos Pjdpfxsi D Ttdj Ah Uerf

Condition: used, Instrument Systems Instrument Systems LED Testing Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices are from a laboratory environment, manufactured in 2007–2008, featuring high-quality industrial measurement technology. Scope of delivery / Included components - CAS 140C-152 spectrometer (2008) - Integrating sphere ISP250-110 & ISP250-211 (2008) - LEDGON 100 goniophotometer (2007) Pjdsx Da Awspfx Ah Uorf - CSD315 3-axis controller + emergency stop control panel (2007) - Keithley 2611 SMU / SourceMeter - PC system including software: - SpecWin Pro - SpecWin Light - Goniometer module - Original license CDs - User manual "LED test sockets" - Cables & accessories as per photos Technical features - Measurement of total luminous flux (lumens) - Spectral analysis (color temperature, CRI, chromaticity coordinates xy, spectrum) - Goniophotometric angular measurement - Analysis of radiation characteristics - Electrical control and IV measurements with Keithley 2611 - Fully automated test procedures with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Total dimensions/weight: approx. 40–45 kg Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: good (used), MS Qualispray Manual Powder Coating Unit Manufacturer: MS Powder Systems Powder Coating System: Qualispray Digital Control Unit: QSM 2500 Item No.: 80510000 Hand-held Spray Gun: MS Corona CP-2100 Features and Benefits The Qualispray system is part of MS' comprehensive powder coating solutions, known for their efficiency, especially in applications requiring rapid color changes. It controls the Corona (MS Corona) and Tribo (MS Tribo) powder coating processes. The unit features digital displays for parameters such as frequency (F), powder quantity (D), voltage (kV), and current (µA). Buttons allow for programming (PRG), confirmation (ENTER), and increasing (+) and decreasing (-) values. An on/off switch is also included. ``` MS Corona CP-2100 Type: Coating spray gun Output voltage: max. 100 kV Polarity: Negative (standard for most powders) Maximum powder output: Approx. 450 g/min Compatible powders: General powder coatings and metallic powder coatings Pedpfxox Ihqts Ah Ujrf Weight (gun): The handheld spray gun is very lightweight at approx. 380 g, enabling fatigue-free operation. Technology: It utilizes corona charging technology with a patented corona feedback system, providing high coating quality and high transfer efficiency. Features and Benefits Ergonomics: The lightweight and balanced design of the handheld spray gun ensures easy handling. Efficiency: The high-performance cascade maintains a stable high voltage, guaranteeing uniform and efficient coating, even in hard-to-reach areas (Faraday cages). Adaptability: Thanks to a versatile nozzle system and optional accessories, such as the "SuperCorona" ring for exceptionally smooth surfaces, the gun can be adapted to specific coating tasks. Application The MS Corona CP-2100 is used in industrial and commercial powder coating applications, for example, for metal fences, automotive parts, radiators, and other workpieces where a high-quality and uniform surface finish is required. Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2012, Reading Bakery Systems Kibbler Prodpfxjx Edd Uj Ah Uof 2012, Stainless kibbler, previously used for breaking up cereal bar mixtures after being mixed, 1000Kg stainless hopper mounted on conveyor, belt width 1150mm, overall length 2750mm, touch screen controls, 3Ph

Condition: used, Year of construction: 2003, operating hours: 200 h, functionality: fully functional, fuel type: diesel, color: blue, power: 80 kW (108.77 HP), output voltage: 400 V, output frequency: 50 Hz, nominal power: 80 kW (108.77 HP), nominal power (apparent): 100 kVA, continuous power (apparent): 100 kVA, Used Diesel Generator – Volvo Penta TAD 520 GE | 100 kVA / 80 kW | Enclosed Technical Specifications: Brand: SES (Scandinavian Engineering Systems A/S) Engine Model: Volvo Penta TAD 520 GE Power Output: 100 kVA / 80 kW Voltage: 400/231 V Frequency: 50 Hz RPM: 1500 Year of Manufacture: 2003 Enclosure: Yes (Soundproof cabinet included – see photos) Cooling: Water-cooled Prsdpfx Ahswzimcj Uof Control Panel: Integrated Condition: Used, in good working order Additional Information: Engine rated at 102 kW PRP (Prime Rated Power): 94.0 kW Alternator type: UC 274 D Fully enclosed cabinet – suitable for outdoor installation Regularly maintained Ready for inspection and immediate dispatch Photos available upon request.

Condition: used, This listing is for a Enviro Systems UVIC-750 Prjdpfxsxzhu Aj Ah Usf

Condition: new, Balance Systems 9SHVM2512BN220 balancing card SN: B804342, unused in opened original packaging, 100% functional, scope of delivery as per photos. Psdpox Eqvgofx Ah Uerf

Condition: ready for operation (used), Year of construction: 2018, operating hours: 40,365 h, General Data Machine weight 22000 kg Injection Unit Screw diameter 100 mm Clamping Unit Clamping force 2500 kN Opening stroke 650 mm Max open daylight 1500 mm Distance between bars 630 x 630 mm Ejector stroke 200 mm Ejector force for / back 60 kN Additional Equipment Injection unit: 13000 kg Clamping unit: 9000 kg Podpfxex D N E Ue Ah Usrf only hot runner is includeed This Otto Systems eKW 250/5500 PET was manufactured in 2018. It features a clamping force of 2500 kN, a screw diameter of 100 mm, and a maximum injection speed of 250 mm/s. The machine has a dry cycle time of 1.6 seconds and a total weight of 22000 kg. If you are looking to get high-quality injection molding capabilities, consider the Otto Systems eKW 250/5500 PET machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Specifications: Model: 1120SPL Manufacturer: Hosokawa Polymer Systems (USA) Cutting chamber: 11" x 20" (279mm x 508mm) Motor: 20 HP / 15 kW, 400V, 3 Phase Rotor diameter: 12.5" (318mm) Rotor knives: 3 Bed knife: 1 Screen area: 373 in² (2406 cm²) Typical throughput: up to 650 lbs/hr (≈295 kg/hr) depending on material and screen size Approx. weight: 1,600 lbs (726 kg) Pedpfx Aexvc D Ush Usrf Dimensions: L 69” x W 36” x H 57” (1753 x 914 x 1448mm) Features: Heavy-duty welded steel construction Easy access for cleaning and maintenance Safety interlocks and belt-driven motor Ideal for press-side, post-production, or recycling use Clean and well-maintained unit – ready to run

Condition: good (used), 3D Systems Type: ProX™ 800 ProX™ 800 3D Production Printer by 3D Systems – High-performance SLA Printer Machine has been regularly maintained Operating hours: 18,700 (as of 18.04.2023) Pjdpfx Ahjxam Ifs Uerf Not operated after 18.04.2023 Note: Annual servicing carried out up to dismantling For sale is a used ProX 800 stereolithography (SLA) production printer from 3D Systems. This large-format SLA system is equipped with the latest printhead technology and is suitable for high-precision components and industrial applications (e.g. automotive, aerospace, medical technology). Additional features: - Automatic material replenishment system and pre-assembled material supply module (quick module change, uninterrupted operation) - 3D-Manage™ software for CAD model and print job management - Touchscreen operation on the device (Print3D Pro™) - Status/signal light module, central user interface - Comprehensive safety system including laser safety monitoring (Class I), emergency stop switches, and interlocks - Detailed maintenance and error diagnostics functions - Material container (MDM) Technical Data: - Printing technology: Stereolithography (SLA) with frequency-tripled Nd:YVO4 UV solid-state laser (355 nm, max. 3 W) - Maximum build volume: approx. 650 × 750 × 550 mm - Dimensions (L × W × H): approx. 1370 × 1600 × 2260 mm - Weight: approx. 907 kg - Resolution: up to 0.00127 mm (laser spot size), 4000 DPI - Accuracy: ± 0.025–0.05 mm per inch - Materials: Wide range of Accura resins (tough, transparent, high-temperature resistant, biocompatible, etc.) Electrical connection: - Power supply: 200–240 V AC - Frequency: 50/60 Hz - Phase: Single-phase - Fuse: 30 A - Weight: approx. 1200 kg incl. material module Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: used, This listing is for a Ortho Diagnostic Systems Cellwasher 2 Psdpfxsxzhc Ho Ah Usrf

Condition: new, Balance Systems 9SGJ025A050200 SN:B512880, unused in opened original packaging, 100% functional, delivery as per photos. Prsdpfxex Eqvme Ah Uef

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Solid-state Nd: YVO4with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000mW at the resin surface under standard conditions) Zaphyr TM coating system: Process: Replaceable coating agent Adjustment: Self-leveling and self-correcting Production layer: Minimum 0.05mm Maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Detection of large lines Nominal: 0.76mm Maximum drawing speed Edge detection: 3.5m/sec. Detection of large lines: 25m/sec. Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Ambient conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirement: Predpfxjnkalge Ah Uof Size (WxDxH), unpacked: 1260mm x 2200mm x 2280mm Weight packed (no RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, This listing is for the Partical Measuring Systems LASAIR lll 310c particle measuring systems The unit is in full working condition and is ready for immediate release The Lasair® III 310C is a state-of-the-art portable aerosol particle counter designed to meet the stringent requirements of highly regulated environments. Manufactured by Particle Measuring Systems (PMS), it sets the standard for portable particle counters, ensuring that your environment remains clean and compliant.​ Key Features Particle Size Range: 0.3 to 25.0 µm Flow Rate: 1.0 CFM (28.3 LPM) ±5% Prodpfx Ahexv A T Ne Ujf Counting Efficiency: Complies with ISO 21501-4 requirements Display: 8.4" color VGA IR touch screen (IP65 rated) Data Storage: Up to 3,000 complete data sets Connectivity: Ethernet, Modbus TCP/IP, RS-232, USB data downloading; optional wireless Ethernet Environmental Inputs: Four 4-20 mA inputs for external sensors Power Options: Operates on AC power or hot-swappable batteries Compliance: Meets ISO 14644-1, EU GMP Annex 1, and ISO 21501-4 standards Software Compatibility: Supports FacilityNet, PharmaceuticalNet, and FacilityPro for data analysis and reporting Reporting Capabilities: Cleanroom certification results are available through a local printout, downloadable via USB in a secure format, or through the use of external software packages Wireless Communication: Wireless network communications are facilitated with an externally mounted wireless adapter, simplifying communications with network systems ​ Specifications Dimensions: 30.1 x 32.7 x 25.9 cm Weight: 6 kg (without battery), 7.5 kg (with two optional batteries) Operating Environment: Temperature: 0 – 30°C; Humidity: 5 – 95% RH non-condensing Sample Tubing: Supports 3/8", 1/2", and 3/4" tubing up to 8 meters in length Sample Output Filtering: Internally filtered to >99.97% at 0.3 µm

Condition: ready for operation (used), Quin Systhems PTSM322 Mini Machine Manager , serial no. according to photo ,used, good condition, 100% functional, scope of delivery according to photos Prodpfx Asi Ecl Deh Usf

Condition: excellent (used), Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. Thus, even large models can be manufactured without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one print run. 3D color printer with enormous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. This eliminates the need for dedicated support structures, even for complex and detailed prints with these 3D printers. The unconsolidated powder supports the parts during printing and is then recycled semi-automatically. Areas of application Communication of form and design, installation analysis, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for thermoforming, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of full color 3D printing systems. Pedpfxshb Dtpj Ah Uerf Technical data: ZPrinter ProJet 660 Pro 3D Printer Size: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum detail size: 0.1 mm Automation: Complete (automated set-up and self-monitoring, automated print

Condition: new, Balance Systems 9NDRAEA0046000 SN:B512867 ,unused in opened original box, 100% functional, scope of delivery according to photos Psdei D T A Repfx Ah Usrf

Condition: new, Balance Systems 9SGJ025A050200 Digitally operated balancing head, SN:B512879, unused in opened original packaging, 100% functional, scope of delivery as per photos Pedpfx Aoi D T Dneh Ujrf