Used Susemihl Gmbh Maschinenfabrik for sale (70,418)

Year of construction: 2026, condition: new, extruder 30 mm with die-face pelletizer, the housing, made from stainless steel, is swivelling. the lenght of the granules is adjustable by means of the cutting speed. Itsdpfsf Uc Ugex Addsb optionally, we offer a transport belt for cooling the granules.

Year of construction: 2026, condition: new, PMH Filament strand pelletizer, Type SG10 compact machine with two drives for feeding and cutting rotor designed for one strand with max. 3.5 mm diameter Itodokyt T Sjpfx Addjb

Year of construction: 2026, condition: new, Extruder 30 mm - 28 l/d with die for weldingwire extrusion or profilextrusion with cooling bath with adhesive water blow-off with haul-off with winder and guiding device Iedpfsi Tu U Ujx Addstb

Year of construction: 2026, condition: new, functionality: fully functional, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Itjdpfx Adsiv H Ekodjb Inspect available machines at our factory in Königswinter. We can also provide machines in other dimensions.

Condition: used, The machine shapes the spine of a brochure into a square shape and presses the brochures. Itjdpfx Adjyanh Iodeb Min. brochure size (mm) 70×105 Max. brochure size (mm) 305 x 364 Max. brochure sheets 30 (80 g/m²) The machine is used and shows signs of wear. The machine is in working order; please refer to the images for its condition. Individual plates on the machine have been replaced with customised plates. The original plates are available and included in the scope of delivery. The sale is made without any warranty.

Condition: used, Year of construction: 2003, Manufacturer : Martin Christ Gefriertrocknungsanlagen GmbH Model: EPSILON 2-6D Year: 2003 Type : Laboratory and pilot freeze-dryer Applications: Dry or liquid drying in vials, bottles, ampoules, flanges, trays, etc. Examples of products: Biological products: bacteria, viruses, tissues, plant extracts / Pharmaceutical products: plasma, serum, antibodies, vaccines / Biochemical tests / Food products: ferments, vitamins General data : Pre-freezing, freeze-drying (sublimation) and final drying Vacuum application, < -10°C 3 + 1 shelves Shelf surface area: 0.3 m². Distance between shelves: 68 mm Software: SCADA Software Cleaning flange Sample extraction system Manual stopper for vials Ice condenser : Capacity: 8.0 kg Performance: 6.0 kg / 24 h Itodpfx Adox R Dlfjdeb Temperature: -75°C Dimensions : Width: 800 mm Depth: 840 mm Height: 1640 mm Weight: ~650 kg Energy data : Power supply: 3-phase, 400 V / 50 Hz Power consumption: max. 5.0 kVA Max. ambient temperature: +25°C Refrigerant : Types : R404A, R508, Isceon 89 Heat transfer fluid: Syltherm XLT Technical connections Warm water inlet: ½" hose connection Defrost water drain: ½" hose connection Vacuum exhaust: DN 25 stainless steel pipe Ventilation: DN 6 connection Others : Documentation and qualifications available Sold with LPC plus computer for data analysis. Spare parts

Condition: like new (used), Year of construction: 2019, functionality: fully functional, power: 9.5 kW (12.92 HP), input voltage: 400 V, type of input current: three-phase, Docking station from Kraham Maschinenbau GmbH. U-form DS10 The docking station is used for feeding and transferring pallets, GLTs, mesh boxes, or half GLTs. The system was designed for connection to tugger train systems. It features both infeed and return conveyance of materials and is constructed in a U-shape. !!!THE UNIT HAS NEVER BEEN USED AND IS THEREFORE IN AS-NEW CONDITION!!! Isdpfx Adex Eiqmodotb Transport and freight costs are to be borne by the buyer. The system will be made available at a loading ramp. Please contact me if you require further details, photos, or documents.

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed Itsdpfex U Sfnjx Addsb • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: new, functionality: fully functional, Year of construction: 2026, Vertical Broaching Machine VADARI GmbH Type SRM 2027- 60 kN – New Machine – BROACHING MACHINES MADE IN GERMANY ==> Latest update: A fully refurbished used machine will soon be available again after reconditioning. Please inquire separately! ==> Information for manufacturing companies or dealers with their own production: If required, the drawings, rights, spare parts, customer and prospect data, planning and production documents (including plans for a 9-ton pulling force variant) for the broaching machine can be acquired from us. If interested, please contact us. ==> Our new machines are manufactured to order. Rapid production and delivery possible. ==> Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are available for immediate delivery. Cost-effective and extremely robust vertical broaching machine designed for long-term use. Itjdpfouqbnhjx Addeb Broaching tools (including custom needles for internal splines, etc.) and accessories are available. Please inquire for details. All types of broaching tools and tool holders from other manufacturers can also be used with our broaching machine! Complete manufacturing and assembly are carried out at our facility in Germany. Prompt delivery available by arrangement. Additionally, we supply spare and wear parts (spindles, spindle nuts, motors, gears, and all necessary components including electrical parts) for both Wolff and VADARI SRM broaching machines. Vertical Broaching Machine Type SRM 2026 – NEW MACHINE: The machine is primarily intended for producing keyway slots from 3–28 mm, as well as profiles of similar dimensions. Its compact footprint allows for successful use in small, medium, and large businesses. The low price makes it suitable even for small production runs and one-off manufacture. The drive is provided by a multi-speed gear brake motor. The maintenance-free double spindle drive ensures smooth operation and a central pulling point, resulting in consistent cutting performance. The open tool table enables convenient placement of even large workpieces. In most cases, workpieces do not require clamping. Stroke adjustment is controlled by adjustable limit switches with stroke limitation. For short hubs/workpieces, multiple parts can be stacked on top of one another. Broaching needles, mandrels, and spare parts available at favorable terms upon request. Technical Data: Pulling force: 60 kN at 3 m/min; 40 kN at 6 m/min Broaching speed: 3 m/min + 6 m/min (Optional: stepless speed control from 0 m/min to 6 m/min via extended electronics) Return speed: 6 m/min Stroke: 1050 mm Broaching tool length: 1200 mm Workpiece diameter: unlimited Work table: 450 x 350 mm Table opening: 140 mm Weight: approx. 510 kg Footprint: 750 x 570 mm Total machine height: 1510 mm Drive power: 3.7 / 4.4 kW Electrical equipment: 400 / 230 Volts, 50 Hz Control voltage: 230 Volts Operating voltage: 400 Volts, 50 Hz Paint finish: Exterior RAL 7035/7036/7016, Interior RAL 3000 or customized Safety door: Standard equipment Coolant system: Standard equipment The machine complies with the latest Machinery Directive and is CE marked.

Year of construction: 2025, condition: as good as new (ex-display), Universal testing machine PM10 Force: 10 kN cross beam stroke: 700 mm Installation space: 400 mm Iodpfed R Dpmex Addotb total height: 1230 mm Weight: ca.85 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 10kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Year of construction: 2024, condition: as good as new (ex-display), Universal testing machine PM5 Force: 5 kN crosshead stroke: 520 mm working chamber depth: 66 mm total height: 1036 mm Weight: approx.48 Kg Iodsd R Dqbepfx Addotb travel resolution: 0,01 mm test speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 5 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, so that a "quick test" can also be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This enables you to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & Commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping fixtures: Pressure plates, bending fixtures, shear fixtures, wedge grips, shear grips, peeling grips, screw grips, pneumatic grips and hydraulic grips.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Universal testing machine PM3 Force: 3 kN cross beam stroke: 520 mm Working area depth: 66 mm total height: 1036 mm Weight: ca.40 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Cc7d2rmq Return speed: 700 mm / min Force transducer: 3 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. Iedefdzupjpfx Addetb This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Year of construction: 2025, condition: new, Universal testing machine PM50 Force: 50 kN cross beam stroke: 1200 mm Installation space: 400 mm Overall height: 1817 mm Weight: ca.380 Kg Travel resolution: 0.01 mm Testing speed: 0.03-1000 mm / min Return speed: 1000 mm / min Force transducer: 50 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: Isdped R Dp Eefx Addetb - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Year of construction: 2025, condition: as good as new (ex-display), Universal testing machine PM3 Force: 3 kN cross beam stroke: 520 mm Working area depth: 66 mm total height: 1036 mm Weight: ca.40 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 3 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning Itodpfxsd R Dpuj Addjb -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: as good as new (ex-display), Year of construction: 2021, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 300 mm, Equipment: documentation/manual, lighting, AIM coordinate measuring centers are the technical successors of the Mahr Mahr multisensor coordinate measuring coordinate measuring machines. Technical data: Measuring range: 500 x 500 x 300 mm Dimensions: 1520 x 1040 x 2040 mm weight: approx. 1.200 kg max. workpiece weight: on glass plate approx. 40 kg Accuracies: U1=1,9 + L/200 U2=2,4 + L/150 U3=2,9 + L/100 (L= measuring length in mm) increased accuracy on request traversing speed: 200 mm/s acceleration: 400 mm/s scale resolution: 0.0001 mm Multisensor sensor unit (MSH) optical/tactile/laser -incl. high-precision USB camera with 2-stage zoom with telecentric beam path -incl. PTL01 TTL point laser, highly accurate, telecentrically coupled in -incl. Renishaw TP200 integrated tactile probe system, optionally extendable -incl. Quad-Light LED Power Ringlight, programmable incident light -incl. LED power transmitted light Ijdpfx Adeg Ewk Redjtb -incl. Nikon precision lens 5x (optional 3x, 10x, 20x, 50x) C-Mount Technology -incl. calibration standard with factory calibration certificate, consisting of glass plate "circle", calibration sphere and ring gauge Transfer -State-of-the-art PT200 CNC controller system in a solid, industry-standard control cabinet -PCI-BUS system for fast internal data transfer in real-time operation -Extendable 19" controller rack for optimum access in case of servicing -modular controller concept open for later upgrades and retrofits -service-optimized controller design fast access and service times -Integrated 64-bit broadband bus technology with Ech [...]

Year of construction: 2001, condition: ready for operation (used), HEK GmbH VGO 200 S Heating cabinet Itodpfx Adsg Hzqbodjb Dimensions (approx.): Width: 1035 mm Depth: 800 mm + 210 mm tube Height: 820

Year of construction: 2025, operating hours: 10 h, condition: new, functionality: fully functional, overall weight: 800 kg, total length: 120 mm, total width: 900 mm, total height: 1,900 mm, laser power: 30 W, laser wavelength: 1,064 nm, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English Ijdpfoxuvk Ejx Addotb - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2025, condition: new, functionality: fully functional, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) Itjdpfx Aswkpxkeddeb - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: new, Year of construction: 2025, functionality: fully functional, spindle speed (max.): 60,000 rpm, type of input current: AC, table length: 320 mm, table width: 560 mm, year of last overhaul: 2025, warranty duration: 12 months, working width: 560 mm, working length: 320 mm, number of axes: 3, The compact table version LOW MINI was specially developed for separating panels for small-format series, for small series with large formats, and for cost-conscious manufacturing. PCB materials with remnant web connections can be quickly and economically separated up to a size of 320 mm x 560 mm. The separation process is servo-controlled on all axes, with the milling drive from above. Switching the working area from small (320x280mm) to large (320x560mm) format is the highlight of the machine, thanks to its simple and uncomplicated operation. • Short cycle time due to shuttle operation • X/Y axes with linear motor technology • Panel fixation with pin technology • Flexible handling • PCBs with remnant web connections • Milling spindle adjustment with servo technology • Extraction device • Easy operation Itjdpfjxmfdxex Addeb • Optimal price-performance ratio Manual panel separation – flexible and cost-effective The concept of manual panel separation offers enormous advantages when it comes to flexibility and cost. Medium production volumes can be separated quickly and with low dust using the LOW MINI. Standard is 2-way loading with linear motor technology; to enlarge the working area, operation with a single shuttle is possible. The maintenance and user-friendliness combined with the excellent price-performance ratio allows for pleasant working conditions and also makes investing in this panel separator economically worthwhile. Axis speed 160mm/s Repeat accuracy 0.02 mm Separation accuracy 0.1mm Shank tool 0.8 - 2.4mm

Year of construction: 2025, condition: new, functionality: fully functional, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge - Fiber laser 20 Watt (Optional: 30 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with anti-trap protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg Ijdpfx Adjw Et Ilsdjtb - low operating costs - marking of various materials

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status - marking software EZCAD (optional additional laser software) Iodpfsv Sybyox Addstb - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Condition: used, Year of construction: 2024, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Ijdoif Ek Ropfx Addetb Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 35 h, functionality: fully functional, machine/vehicle number: 2002-045, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head The machine is sold with one driven circular knife and one punching tool. • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers Isdpfx Asfnlkweddetb • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Itsdpfx Aefhgvwsddeb Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: used, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Ijdpfxswgc I Rj Addotb Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.