Used Susemihl Gmbh Maschinenfabrik for sale (70,034)

Condition: like new (used), Year of construction: 2007, Used stainless steel tank with ATEX agitator and floor scale Last use: Pharmacy, cosmetics Item number: 10817 Volume: 1300 liters Type: Upright on 4 feet Height of feet: 800mm Material (wetted parts): 14571 / AISI 316 Cover: Ø 400mm Design: Single-walled Operating pressure according to type plate: +0.5 bar Tank dimensions: Kljdper A Elzefx Addol Outer diameter: 1200mm Overall width: 1350mm Total length: 1360mm Total height: 2230mm Cylindrical height: 840mm materials: Interior: 14571 / AISI 316 Outer parts: 14301 / AISI 304 Equipment: Type plate: Yes ATEX agitator Outlet valve: Disc valve Outlet: DN 50 Fill level sensors Floor scale: 1250 x 1000 x 85cm

Condition: good (used), Year of construction: 1989, Equipment: type plate available, Used stainless steel container Last use: Pharmacy Item number:10821 Volume: 20000L Operating pressure: Atmospheric Klodpfxeth Shqo Addel Max. Operating temperature: +80 °C Type: horizontal on 4 feet Material (wetted parts): 1.4301 / AISI 304 Design: single-walled Tank dimensions: Cyl. height: 4500mm Total height: Approx. 3100mm Height of the feet: 970mm Outer diameter: 2500mm Total width: 2750mm Total length: 4600mm materials: Interior: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Equipment: Manhole: 440 x 340mm Type plate: yes

Condition: good (used), Used insulated stainless steel container with stirrer and double coat Last use: Food Kljdjd Nap Repfx Addol Item number: 10340 Volume: About 6300L Type: Standing on three feet Material (media-touched): 1,4301/AISI304 Execution: Isolated with double coat on the ground Floor: Flat floor Usehigh: Vaulted Operating pressure according to type plate: ATM Dimensions containers: Container diameter: 2030mm Zyl. Height: 2000mm Distance drain to ground: 330mm Height of feet: 390mm Total height: 2940mm Total width: 2050mm Materials: Inside: 1,4301/AISI 304 Exterior: 1,4301/AISI 304 Facilities: Cathedral lids-como 490mm Diameter spout: 40mm Agitator slow-running Cylinders isolated Underfloor with double coat

Condition: good (used), Used stainless steel container / transport container / IBC Final use: Chemicals Tank cleaned and with hazardous goods approval up to 10/22 Item number: 10495 Volume: 500 litres Type: Standing in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Design: Single wall Base: Vaulted Topsoil: Vaulted Operating pressure according to type plate: +0.1 Bar Tank dimensions: total width: 1200mm Kodoflrhqepfx Addjll total length: 1000mm total height: 1000mm materials: Interior: 1.4301 / AISI 304 Exterior parts: Galvanized steel facilities: Nameplate: Yes diameter outlet: approx. 70mm Outlet Type: Disc valve Outlet valve: Yes Manhole cover 400mm with clamping ring

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 360034, Fine grinding machine for various workpieces made of different materials with opposing flat surfaces that need to be ground on one or both sides, e.g., wafers, valve covers For flat honing of workpieces with special height, parallelism, and flatness requirements. Klodpfjir Ul Ssx Addsl Technical data Workpiece diameter: 5–220 mm Workpiece thickness: 0.6–80 mm Warranty 6 months legal warranty

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 381019, Machine type Planet V7 Machine no. 381019 Klodpfx Aoi Hp U Eoddel Technical data Double Disk Grinding Workpiece diameter: max. 180mm Workpiece thickness: max. 100mm Condition Technical quality – very good Optical quality – like new Location Germany Warranty 6-month legal warranty

Condition: used, functionality: fully functional, GIGAbend RAS 76.30 - New images available: Display images 1 to 3 are sample images showing the appearance and current configuration. Display images 4 to 6 are actual images. - General technical data (in mm): Bending length: 3200 mm Kodpfsx Hf E Ejx Addjll Maximum sheet thickness (400 N/mm²): 6.0 mm Maximum upper beam stroke: 500 mm Clamping force of upper beam: 120 tons Backgauge system (U shape): 10-4050 mm Machine dimensions (U-backgauge): 4620 x 5480 mm Base machine weight: 11 tons Backgauge + U-form weight: approx. 1205 kg - Machine-specific data: Motor operation: 400V, 50/60 Hz, 3-phase Year of manufacture: 2007 Condition: Repaired – very good used condition Complete tool set Operated by 2 persons from the front Second foot switch for rear operation (incl. light barrier for working from the rear) 15" CNC color graphic touchscreen control Touch&More CNC backgauge and support system (10-1550) Backgauge system (U shape): 10-4050 mm

Condition: like new (used), Year of construction: 2022, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, Duramax in as-new condition Measuring range: X=500mm, Y=500mm, Z=500mm Length measurement deviation E0 in µm, E0/E40 in µm, MPE according to ISO 10360-2:2009 2.4 + L/300 at 18°C - 22°C C99 control with BP26_SE operator panel Very low operating hours Kjdpfxjyb A Ske Addjll Equipment: VAST XXT sensor 3-position probe changer magazine 2 probe changing trays Calibration sphere with certificate Machine folder, device documentation, operating manual Various probes HP Z2 workstation and monitor SiPos automation preparation possible Additional accessories Software: Calypso Basic 2022 (7.4) Calypso Prest module 2022 Upgrade and additional options possible Transport, commissioning, calibration and training possible Available immediately

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, track width: 3,000 mm, working range: 6,000 mm, total width: 3,800 mm, total length: 11,000 mm, product height (max.): 70 mm, cutting height (max.): 60 mm, Lind plasma cutting system with HiFocus 360I Hypertherm cutting unit incl. KWE 360, PGV 3. Cutting table with complete extraction system. The plant is fully operational and in excellent condition. Demonstration possible. Original price €190,000.00. The plant is immediately available. The price is valid for purchase decisions made by the end of November!! Dismantling possible in January 2026. Kljdpewmq Tzjfx Addel

Condition: used, Rotating Device Gunter Seibold Rotating Device for HTS Coils – Steplessly Adjustable Drive (Type S05082) Description: Professional rotating device designed for accommodating and rotating HTS coils with a winding core. Developed to ensure even distribution of two-component resin during the curing process. Ideal for development, laboratory, or manufacturing environments working with high-temperature superconductor coils. The winding form is electrically heated, with power supplied directly to the form (not included in the scope of delivery). The machine stands out for its precise control, user-friendly operation, and maintenance-friendly design. Technical Features Solid Machine Base: Welded square tube construction with leveling screws and floor anchors Drive: Three-phase planetary gear motor (11 kW, 400 V, 50 Hz, 3 phases) Steplessly adjustable speed (0.2 – 100 min⁻¹) Soft-start & soft-stop via frequency inverter (4-quadrant controller) Electromagnetic spring-applied brake (safe stop in case of power failure) Selectable clockwise/counterclockwise rotation Control Panel: 5.7" touch panel for configuring speed, direction, ramps, time, or total rotations Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrics & Control Cabinet: Control system integrated in the machine base 400 V / 230 V supply, 24 V DC control voltage Circuit breakers, RCD 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with climate control unit Complete grounding & static discharge of the main shaft Adjustable workplace lamp, tiltable and height-adjustable Specifications Feature / Value Max. coil diameter: 1,500 mm Coil passage: 1,700 mm Center height above floor: 1,100 mm Max. load on faceplate: 500 kg Faceplate Ø 600 mm, 4 T-slots (DIN 650) Speed range: 0.2 – 100 min⁻¹ (stepless) Torque: 775 – 539 Nm Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Connected load: 11 kW Kledpfx Adsxwmkusdel Connection current: 32 A Color scheme (according to RAL): Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / cabinet: Light grey (RAL 7035 / 5010) Weight: approx. 1,800–2,000 kg Condition: used Scope of delivery: (see picture) (Subject to change and error in the technical data and information!) We are happy to answer further questions for you by phone.

Condition: excellent (used), MDI Type: Laser cutting system LC 800 MDI laser cutting system Koded N Erqepfx Addjll Laser cutting system LC 800 with UC-2000 laser controller and MSA control system 9010 LCD for gas warning system Technical data: Machine data: Machine dimensions: (L x W x H) 2,520 mm x 2,090 mm x max. 1,945 mm Control cabinet dimensions: (W x D x H) 600 mm x 600 mm x 2,000 mm Machine weight: Approx. 2,500 kg Control cabinet weight: Approx. 1,000 kg Control: Siemens S7-300 and Siemens Simotion Spindle drives: THK Rotation axis: Harmonic Drive Table size: 810 mm x 680 mm Max. substrate size: 650 mm x 780 mm Number of Cutting heads: 2 (laser for glass cutting, knife for foil cutting) Number of cutting tables: 1 Workpiece clamping: Lasercut frame for laser cutting, vacuum plate for foil cutting Noise level:

Condition: excellent (used), Year of construction: 2023, GHS Type: VDS-S30 / VUTS-EC Vacuum Drying Oven with Vacuum Pump Year of Manufacture: 09/2023 Professional vacuum drying oven with pass-through function – ideal for cathode & anode materials The GHS VDS-S30 / VUTS-EC vacuum drying oven is used for drying cathode and anode materials in battery cell manufacturing. Additionally, it serves as a pass-through into controlled dry rooms (e.g. Kljdpfxow Ekd Dj Addel

Condition: used, KB Prüftechnik hardness tester type: KB 750 BVRZ Machine type: KB 750 1 kg - 750 kg UNIVERSAL DIGITAL KB universal hardness testing machines for automatic and standard-compliant hardness testing. Suitable for all hardness testing methods in the load level range HV 0.2 1 - 3000 kgf, Vickers, Brinell, Rockwell, Super-Rockwell, Knoop (HK 1 only), ball indentation hardness (plastics) and depth measurement according to Vickers and Brinell. Fully automatic test sequence, evaluation of the impressions on the built-in LCD monitor using a built-in video camera and zoom lens guarantee maximum evaluation accuracy in accordance with the standard. All hardness values are immediately displayed digitally. User-friendly and powerful control panel with color LCD monitor, high-contrast and glare-free. The indentation is measured without parallax. The test forces are electronically controlled and applied with maximum precision. The video image can optionally be output as a BMP file. All KB hardness testing machines are supplied with basic equipment that enables immediate commissioning with the indenters ordered. A selection of fixtures, test tables, indenters, lenses, hardness reference blocks etc. are available. Connection to a PC or central computer is possible with all KB hardness testing machines. In conjunction with the fully automatic software and motorized cross table, the machine can be operated as a fully automatic machine. Fully automatic test sequence Optical evaluation via integrated video evaluation Extremely user-friendly and powerful large LCD color display industrially designed membrane keyboard Variable software customization zoom lens 1:7 parallax-free measurement load cells, controlled load application, LED illumination Rockwell resolution 0.025 HRC Extremely powerful 200 freely definable test programs Calibration machine accuracy (option) Innovative LED ring light (option) Automatic image evaluation (option) 2 interfaces parallel + serial, as well as keyboard connection extended load range XL (option) freely switchable language selection German, English, French, Italian KB750 BVRZ: Test load 3-750 kgf Brinell ISO 6506 HB depth measurement Vickers ISO 6507 HV Depth measurement Rockwell ISO 6508 Rockwell ISO 6508 Superrockwell Test table ∅80 mm Motor zoom 1:7 Objective 4x for HV10-HB5/750 NOT suitable for HV5 Operating function: Programmable digital panel with the following functions: Measurement of the hardness impression on the LCD display, with movable measuring marks, parallax-free Logically structured, simple operator guidance Creation and storage of any of 200 test programs Automatic force selection by selecting the test method Freely selectable test force application times Freely selectable holding times of the test forces Online help Automatic correction for curved surfaces in accordance with DIN EN ISO Control of the fully automatic test sequence Direct, digital hardness value display Tolerance display Conversions according to DIN 50150 table B1 Report generation in DIN A4 format with standard printer via parallel interface Serial interface for data output to PC Optional network 4 languages German-English-French-Italian Statistics functions, such as Number of tests Min / Max Mean value Kedpfx Adeu Hy Imjdoll Range Standard deviation cp / cpk Histogram (Subject to changes and errors in the technical data!)

Condition: good (used), Year of construction: 2005, Pusher Furnace System (PUS1), Manufacturer: Ipsen International GmbH, Type: PP-2-65x65x65-18-G, Serial No.: AN 10.1595-01, Year of manufacture: 2005, Fuel: Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA comprising: Two-Chamber Pre-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Preheating Furnace, Type: DL 65x65x65 4-G, 25 A, 9.5 kVA, natural gas heated, 80-100 mbar, 350-500°C Pusher Gas Carburizing Furnace (Double Line), Type: PP-2 65x65x65-18-G, natural gas heated, 86 A, 29.6 kVA, 10 kWh/m³, 80-100 mbar, 860-950°C, 140 pieces per batch, 695 kg/h Oil Quenching Bath (Hardening Oil), Type: QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, air cooling, 6 m³ tank volume, 120°C max., 60-80°C working temperature Two-Chamber Post-Washing Machine, Type: WPSSB-65x65x65-E, Ksdpfx Asyabxyjddjll 302 A, 199 kVA, electric, washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Tempering Furnace, Type: DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, 300°C max. furnace temperature, 150-240°C working temperature Batch Transport System, Measuring, Control, and Switch Cabinet with Conti-Control System, Type: CO/CO2-2 Batch Data: Case hardening for transmission parts 650 mm x 650 mm x 650 mm, max. 280 kg, batch transport height 800/2,200 mm

Condition: excellent (used), Year of construction: 2016, operating hours: 12,229 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 585 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 21 kVA, controller manufacturer: Heidenhain, controller model: TNC640, total height: 3,000 mm, total length: 2,370 mm, total width: 2,845 mm, overall weight: 8,000 kg, spindle speed (max.): 42,000 rpm, operating hours of spindle: 2,256 h, number of spindles: 1, number of slots in tool magazine: 90, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, MP7-5 Axis Heidenhain iTNC530i with integrated pallet changer, 36 pallet positions Travel range X/Y/Z: 730 x 250 x 400 mm B-axis travel range: +/- 105 degrees C-axis travel range: infinite Work area X/Y/Z: 585 x 250 x 400 mm Max. workpiece weight: 60 kg Distance: machine table to spindle nose: 450 mm Machine dimensions (W x D x H): 2845 x 2370 x 3000 mm Machine weight: 8000 kg Equipment/Features: Cooling unit Rotary tilt table 160 (B/C-axis) Workpiece measurement: Renishaw OMP400 Tool measurement: BLUM Dynaschine collision controller (DCM) Table chuck: EROWA PowerChuck P 150 Klsdjw U D Igepfx Addsl Pallet changer 36-fold EROWA ITS50...148 Tool changer: 90 positions for HSK40 MHT media distributor with 3 dosing settings Control system: Heidenhain iTNC530 HSCI FS Milling spindle: Steptec HVC140 Spindle power S2/S6 40%: 10 kW / 13 kW Spindle speed: 42,000 rpm HSK40 Z-axis compensation Exo-call fault indicator Exo-net remote diagnostics Network connection Portable control panel HSCI FS Pressure amplifier for chuck Transport, training, and commissioning on request

Condition: good (used), Year of construction: 2009, operating hours: 20,709 h, functionality: fully functional, machine/vehicle number: 106516-11, drilling depth: 1,200 mm, overall weight: 7,500 kg, For sale: A very well-equipped deep hole drilling machine from TBT, including various accessories. Drilling specifications: - Spindle 1: 5–18 mm; Spindle 2: 1–4 mm - Drilling depth: approx. 1200 mm with Ø8 mm using 3 steadies - Number of spindles: 2 - Spindle drive: Spindle 1: 1 x 4 kW; Spindle 2: 1 x 1.2 kW Kjdpfx Adexgnhasdsll - Spindle speed: Spindle 1: 600–6000 rpm; Spindle 2: 2000–24000 rpm - Rapid traverse: 15,000 mm/min - Saddle stroke (nominal): 1800 mm - Coolant: Deep hole drilling oil - Tank capacity: 1,100 liters - Operating voltage: 3AC 400V, 50Hz (Total connected load: 25 kW) Condition: Good, appropriate for its age Accessories: Includes drip tray and various drills On-site inspection is recommended!

Condition: repair required (used), Year of construction: 2011, operating hours: 104 h, functionality: limited functionality, machine/vehicle number: KN 10 39 17, fuel type: diesel, tank capacity: 700 l, output current: 188 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 128 kW (174.03 HP), nominal power (apparent): 130 kVA, rotational speed (max.): 1,500 rpm, motor manufacturer: Deutz, type of cooling: water, For sale is an AVS Aggregatebau GmbH diesel generator with the following key data: Manufacturer AVS Aggregatebau GmbH Type DW 130 De 15 M 12 Generator no. KN 10 39 17 Year of manufacture 2011 Total technical data for generator: Power 130 kVA Voltage 400V 50 Hz Speed 1500 [1/min] TANK 700L Consumption depending on load up to 209g/kWh Operating hours 104.8 h Components in detail: Kljdpfjvtpv Nex Addol Diesel engine Deutz BF6M 1013 E Engine no. 11021228 Power 128 kW Speed 1500 [1/min] Water cooling Generator Mecc alte ECP 34-1L/4 Generator no. 0001444400 Power 130 kVa Cos-Phi 0.8 Voltage 400 V Current 188 A Frequency 50 Hz The unit has the following maintenance backlog: Replace V-belt Replace battery Change cooling water If the buyer dismantles and collects the unit themselves, the sales price is €25,000. If dismantling is carried out by Blue Energy Group AG, additional fees will apply. Components included in the purchase price can be seen in the pictures.

Year of construction: 1983, condition: used, Well preserved chip conveyor & high discharge for CNC lathe or similar machines Remark: The equipment is in our stock and can be inspected under power. The hinge is in good condition. Kljdpfxsgg Sbnj Addsl

Year of construction: 1979, condition: used, - KOM 1557 - General / technical data: well preserved chip conveyor & high discharge for CNC lathe or similar machines Remark: The equipment is in our stock and can be inspected under power. The hinge is in good condition. Ksdpfx Adegg Sabodell

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Kedpfx Asndn Ageddell Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: Kledpfx Adong Exajdsl The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2022, functionality: fully functional, Offered is a shell-and-tube heat exchanger from INNEX Wärmetauscher GmbH, year of manufacture 2022. It is currently not in use and is fully operational. The safety features comply with the latest standards. Technical data: Tube side Medium: Water Max. permitted pressure: 0–6 bar Max. permitted temperature: 0–100 °C Klsdpfjxc Euvjx Addol Shell side Medium: Thermal oil Max. permitted pressure: 0–10 bar Max. permitted temperature: 0–320 °C Manufacturer serial number: H5596 An inspection of the machine is possible upon request and by arrangement.

Condition: used, functionality: fully functional, Year of construction: 2010, Equipment: pallet forks, Offered here are seven hydraulic power units from the manufacturers AC-Motoren GmbH and ADDA Antriebstechnik, built in 2010. The machines are in used condition and are currently not in operation. From a safety perspective, the machines meet the latest standards. All units are operational and ready for use. Jacket compartment: Test pressure (PT) bar: 23 Permissible operating temperature TS (°C): min. +20 / max. +150 Permissible operating pressure PS (bar): min. 0.5 / max. 16 Volume (l): 4 Tube compartment: Test pressure (PT) bar: 23 Permissible operating temperature TS (°C): min. 4 / max. 90 Permissible operating pressure PS (bar): min. 0.5 / max. 16 Volume (l): 5 Kjdpfx Adsxdi I Nedoll An inspection of the machines can be arranged upon request and by appointment. If you have further questions, please do not hesitate to contact us.

Year of construction: 2016, condition: used, functionality: fully functional, If you have any questions, you can contact me at any time by email. The facility is located in Laupheim. Ksdpjya H Uyefx Addjll

Condition: new, New and used briquetting presses. Do you need a briquette press? Contact us. We have many years of experience in machines for briquetting materials such as wood, biomass, paper and much more. We have more than 20 years of experience. Klodpfx Ajx S Ii Roddel Presses for round or rectangular briquettes. We ship alle over EU. Capacity from 20 to 400 kg. per hour.