Used Tape for sale (537)

Condition: like new (used), Year of construction: 2008, amount 1 STK Hnjdpfx Ajxgvy Debvoi

Condition: like new (used), Year of construction: 2008, amount 1 STK Hnjdpfxjuaydlj Abvei

Condition: like new (used), Year of construction: 2008, amount 1 STK Hjdouayf Aspfx Abvsni

Condition: like new (used), Year of construction: 2008, amount 1 STK Hnedpjuayk Sofx Abvji

Condition: like new (used), Year of construction: 2008, amount 1 STK Hjdoul D U Tjpfx Abvoni

Condition: like new (used), Year of construction: 2008, amount 1 STK Hnodouaygmopfx Abvei

Condition: like new (used), Year of construction: 2008, amount 1 STK Hjdeuaylvspfx Abveni

Year of construction: 2020, condition: like new (used), Tapered rollers 550mm for log transport solid construction, good condition 2 pieces available roller length: 800 mm roller diameter: 400 mm shaft diameter: 45 mm Hnedpjgvvvlofx Abvoi 2 stationary bearings INA Sprocket: z= 25, zt=30, diameter: approx. 280 mm

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, working width: 1,935 mm, number of spindles: 40, plate height: 350 mm, working length: 6,200 mm, number of axes: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge tape magazines: 3 Number of tool positions in tool magazine: 22 (located at the rear of the machine) Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X direction: 4 Spindles for horizontal drilling in Y direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Suction cups for securing the workpiece Safety mats at the front Vacuum pump Waste chip conveyor Fixed groove unit for slotting in X direction The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the item prior to collection and assumes responsibility for installation, securing, and operation of the machine at the place of destination. Hedsyqx U Hepfx Abveni External reference: 8105

Condition: good (used), Year of construction: 2017, Endoline SPT case erector and taper 2017, Endoline 102 Case erector inline with Endoline SPT Case taper with top and bottom tape heads and side grip belts, with spare belts and boxes of tape, mobile, 1Ph Hnjdpfxoyti Nts Abvoi

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, measuring range X-axis: 640 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, total height: 2,320 mm, total width: 920 mm, total length: 1,130 mm, compressed air connection: 4 bar, Equipment: documentation/manual, Aberlink Axiom too 600 CNC CMM Hnedpfx Abeyap R Rovoi Machine Type: CNC Co-Ordinate Measuring Machine Version: Axiom too 600 Year: 2007 Condition: Like New as had very little use Includes Upgrade to full CNC Auto Temperature Compensation SMC Refrigeration Air Dryer Aberlink Software PC & Monitor Description When the original Axiom CMM was released in 1997 it revolutionised CMM design utilising extremely innovative CMM technology. The Axiom was hugely successful but now Aberlink have taken all the best features from the original model and improved upon them. The Axiom too offers a larger measurement volume and higher accuracy than its predecessor, incorporating the very latest in materials technology. This Axiom too is the 600 size and is full the CNC version. Technical Specifications Measuring Volume: 640 x 600 x 500mm Accuracy: B89 0.008/300mm (VDI (U3) 0.0035 + L/250mm) Measuring System: Renishaw readheads and tape scale Resolution: 0.0005mm Probe System: Renishaw Max Velocity Vector: 500mm/sec Max Acceleration Vector: 1000mm/sec2 Bearings: Air Bearings on all axes Z Axis: Pneumatically counterbalanced Max Balance Weight: 1kg Air Consumption: 23 I/min (0.8 cfm) at 4 bar Required Air Pressure: 4 bar (60psi) Software: Full Graphical Interface designed for Windows Dimensions: 1130 x 920 x 2320mm Notes: *Specifications are given in good faith but not guaranteed*

Condition: new, Year of construction: 2025, machine/vehicle number: MH-FJ-2, Our carton sealing machine, type VOGEL MH-FJ-2, is equipped with a side drive belt system. The machine automatically adjusts to the respective carton size within the specified range. Carton formats: Length 150 – ∞ mm Width 140 – 480 mm Height 120 – 480 mm Technical data: Length 1,150 mm Hnjdpfx Abjyuc Rasvoi Width 1,005 mm Weight 250 kg Operating voltage 220 V Air pressure 5 kg/cm² CE marking IMPORTANT: An air supply is required to operate the machine; this is not included in the delivery scope. Our carton sealer MH-FJ-2 is specifically designed for changing carton formats. Thanks to the pneumatic adjustment of height and width, a wide variety of carton sizes can be processed quickly and easily without manual intervention. The machine adapts immediately to different formats. Two side and two top conveyor belts transport your cartons safely through the sealer. The top flaps of the cartons must be folded down manually before they are fed into the machine. This machine is designed for adhesive tapes with a 76 mm core diameter and 50 mm width. We recommend using machine tapes with longer lengths per roll (compared to hand rolls), allowing you to work longer without having to change the tape. Both PP and PVC tapes as well as eco-friendly paper tapes can be used. The tape units can be easily removed for quick tape change. Additionally, this function can be used if you wish to seal cartons only on top (keyword: auto-bottom cartons). Of course, this machine is also CE marked. Please note that a compressed air connection on-site is required for operation! Accessories: For our VOGEL carton sealer range, we offer optional castors, infeed and outfeed tables, and roller conveyors.

Condition: like new (used), Year of construction: 2020, The Easymount EM-1200DH is a wide format double hot roller laminator engineered for both laminating and mounting applications. It supports hot and cold lamination, allowing you to laminate prints and graphics, mount prints to boards, and apply vinyls, tapes, and adhesives. Key features include: - Maximum lamination width of 1200 mm (47 inches) - Laminating speed of up to 3.9 meters per minute Hjdeych Utjpfx Abvsni - Mounting thickness capability up to 25 mm (1 inch) - Variable speed settings for precise process control - Reverse mechanism for correcting lamination errors or jams - Heat-assisted rollers for consistent, high-quality results This machine is suitable for mounting wide images with sheet film and for continuous mounting with roll film, providing versatility for various print finishing requirements. It is designed to be durable and reliable for professional use in wide-format finishing environments.

Condition: used, Year of construction: 2019, Henkovac T4 – Professional Vacuum Packaging Machine (2019) Reliable vacuum performance with robust build quality for food‑industry environments. The Henkovac T4 is a compact yet powerful tabletop vacuum packaging machine engineered for professional food processors, restaurants, butcheries, and commercial kitchens. Featuring a high‑quality pump and intuitive controls, the T4 delivers consistent vacuum sealing performance for a wide range of products. Technical Specifications - Model: Henkovac T4 (Tabletop) - Year: 2019 (design generation from this period) - Vacuum Pump Capacity: 16 m³/h – reliable throughput for medium‑duty packaging operations - Chamber Dimensions: approx. 530 × 590 × 460 mm - Seal Bar Length: approx. 420 mm - Weight: ~55 kg - Standard Power: 220‑240 V, single phase, 50/60 Hz (other voltages on request) Key Features - High‑Quality Busch Vacuum Pump: Proven reliability and performance for continuous operation - Deep‑Drawn Stainless Steel Vacuum Chamber: Durable, easy‑to‑clean construction - Maintenance‑Friendly Design: Simple access and serviceability help reduce downtime - Cable‑Free Welding Bar: Clean sealing without clutter, enhancing hygiene and safety - Intuitive Control Panel: Digital time control with optional program upgrades - Optional Consumables Starter Kit: Includes Teflon tape and welding wire for immediate use Ideal For Hjdeyudtijpfx Abveni - Vacuum packaging of meats, cheeses, dry goods, and prepared foods - Retail food‑to‑go operations - Small to medium commercial kitchens - Product portioning and shelf‑life extension * Model: Henkovac T4 (Tabletop)

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Cutting length: 5300 mm Cutting height: 2200 mm Vertical panel saw for cutting sheet-type wood materials such as chipboard, MDF panels, veneer panels, multiplex, etc. Base machine Completely welded frame with extremely high rigidity Precise guidance of the saw beam / saw unit for accurate cutting. Automatic feed for vertical and horizontal cuts. Cutting depth: max. 60 mm Saw beam Sturdy saw beam guided on precision rails. Pneumatic latching of the saw beam in the upper and lower positions. Electric monitoring during vertical cuts Saw unit Smooth and ergonomic operation for plunging and retracting the saw unit. Plunge lever can be folded down from the upper position for precise entry. Generously dimensioned levers for easy swiveling. Housing cover opens the complete saw unit for easy tool changes, including ProLock quick-release chuck. View opening: riving knife can be retracted Automatic functions Automatic plunge, cut-through, retract, and stop or Automatic plunge, cut-through, retract, and return Shortened return travel (selector switch) The shortened return travel of the saw beam prevents unnecessary travel paths of the saw unit (short workpiece positioned on the right) Speed control: infinitely variable from 6 - 24 m/min Cutting depth: max. 60 mm Control panel Efficient operation of the machine. Ergonomically mounted at eye level. Lower workpiece support Stable, wear-free stainless steel support. Support up to the cutting line: narrow workpieces cannot tip or fall through. Extraction Effective extraction with two ports: saw unit Ø 120 mm, frame end Ø 100 mm (for TRK version) Lifting roller transport system: Manually raiseable and lowerable rollers for easy and gentle panel transport. Hsdpfx Aeyuld Asbveni Measuring tape For dimension display in horizontal cutting with three manual measurement displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Series cuts from the top edge of the panel Powerpackage The package consists of the following options: 1. TRK extraction system 2. SuperCut scorer 3. Vertical digital display 4. Stepless speed regulation Saw unit 7.0 kW, 1100–5500 rpm, 400 V, 50 Hz Incl. HW circular saw blade Ø 250 x 30 x 3.2 mm, Z 48, hollow-flat tooth TRK system according to CE guidelines SH 2200 (less than 2 mg fine dust/m³ of air) – mandatory for all CE-required countries (extraction system provided by customer) Pneumatic shifting grid Continuous shifting grid over the entire machine length for stable workpiece support. Automatically, pneumatically retracts during horizontal cuts. Prevents the shifting grid from being cut during horizontal cuts. Digital measurement display for horizontal cutting on the control panel Incl. electric fine adjustment Display of: Absolute measurement from the lower workpiece support OFF-Set measurement from the middle workpiece support Series cuts from the top edge of the panel Saw blade compensation (saw blade thickness can be individually programmed) If the unit is operated via the brake at the ba... (text cut off)

Condition: used, maximum load weight: 33,560 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2021, next inspection (TÜV): 05/2026, loading space length: 13,390 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2021, Equipment: ABS, Lamberet SR2 Greenliner THERMO KING SLXi-300 50 refrigeration unit, 1,280 operating hours, THERMO KING TouchLog temperature recorder, lifting axle, SAF axles, pallet box, ATP certificate valid until 2027, FRC 2027, first ownership, as new, excellent maintained condition. Build Description: Body dimensions: Interior: 13,390 mm x 2,500 mm x 2,650 mm Saddle height: 1,150 mm Body equipment: SL-Y version: Through-loading width 2.50m; vertical aluminum reinforcements every 305mm / roof 85mm with aluminum reinforcements every 610mm, semi-recessed skirting boards. Unladen coupling height (horizontal): 1,150 mm - R65 tires Interior height: 2.65 m Side walls inside: polyester with vertical aluminum reinforcements every 305 mm Checkerplate aluminum floor welded to skirting boards forming a floor pan Despite taking the utmost care, errors in this listing cannot be completely excluded. Errors and prior sale are reserved! Aluminum-anodized rear frame with fully swiveling wing doors, one locking bar per wing - 4 double-action recessed aluminum hinges, aluminum protective strip (270 mm) at the base of the rear doors inside. Upper rear lighting "SAFELIGHT Full LED" integrated into the rear buffer, consisting of: - 2 scrolling indicator lights - 2 multifunction lights (outline/brake light) - 2 work lights. Standard seal closure, without customs seal approval. 1 row of recessed steel combination anchor rails (only thickness of material protrudes), height floor to center of rail approx. 900mm 4 high-performance LED interior lights with "daylight" effect, installed offset; interior light switch located at the front on the bulkhead connection bracket Reflective tape: Red along the rear frame contour and white along the lower edge profile of the side walls (EU Directive) Smooth white gelcoat finish (similar to RAL 9003) Bulkhead preparation for vertically mounted flat refrigeration unit, with cut-out Aluminum fuel tank 240 liters, with right and left filling, installed between the support legs. Universal nozzle with optimized shapes to direct and accelerate air from the outlet + central duct immediately catching the airflow. Patented IAFO (Internal Air Flow Optimizer) open airflow system directs air with minimal load loss to the rear of the vehicle. Galvanized protective grille on the inside of the front wall. 11 rubber bumpers mounted on the aluminum skirting. 2,300 mm x 1,500 mm. Front chassis module GL08, flat structure 8 mm thick, combined with floor, developed to optimize vehicle overall height and withstand heavy frontal loads. 3-axle SAF INTRADISC+ INTEGRAL unit - brake disc Ø430 mm - offset 120 mm - track width 2,090 mm 6 CONTINENTAL tires - Regional HT3 pattern - 385/65 R22.5 6 steel rims Wheelbase 7.45 m (compatible with first axle liftable, EU directive compliant) Automatic lift axle, switchable, first axle EBS WABCO 2S/2M (on center axle) incl. ESS stability aid. Supply via ISO 7638 connector 24V supply with 1 x 15-pin socket (ISO 12098) 99334 Amt Wachsenburg Hsdsyuzvnjpfx Abveni 2 x HELLA Modular HYBRID tail lamps/LED, LED outline lamp, on aluminum-anodized mounting plates with rear protection Front fifth wheel plate extensions as standard, protect the underside of the CX profile, with intermediate rubber plate to absorb coupling/uncoupling impacts Anodized aluminum closing plate between longitudinal beams at the rear, including license plate lighting, roll...

Condition: new, maximum load weight: 24,200 kg, overall weight: 31,000 kg, axle configuration: 2 axles, total width: 2,500 mm, total height: 3,400 mm, Year of construction: 2026, Equipment: ABS, WIESE 2-Axle Hooklift Trailer with Lift Axle, Brand New Vehicle Data: Type: WAK 2-25 SK Gross Vehicle Weight: 31,000 kg Axle Load: 20,000 kg Fifth Wheel Load: 11,000 kg Unladen Weight: approx. 6,800 kg Payload: approx. 24,200 kg Dimensions: Overall Length: approx. 7,100 mm Overall Width: approx. 2,500 mm Fifth Wheel Height: approx. 1,150 mm Roller Height (equipment): approx. 1,500 mm Chassis / Axles: 2 x SAF axles, each 10,000 kg Hnsdsyt T A Depfx Abvei Disc brakes Air suspension with lift and lower function 1st axle liftable (lift axle) Axle spacing: 1,820 mm Brake System: WABCO two-line compressed air brake system EBS electronic braking system Automatic brake force regulator Spring-loaded parking brake Tyres: 4x 425/65 R22.5 tyres Steel rims Hooklift / Hookloader: VDL hooklift, push/knuckle design Type: SK25-6750 DE Lifting/Tipping capacity: 25,000 kg Container length: 5,000 – 7,250 mm Hook height: 1,570 mm (DIN 30722) Tip angle: approx. 50° Max. oil pressure: 350 bar Equipment – Radio remote control with display: ControllerPlus control system Softstop (gentle lowering) Softslide (smooth container shifting) Automatic axle stabilisation during hydraulic operation Manual control for emergency operation Additional Equipment: 4 work lights 24V lighting system as per StVZO 7-pin and 15-pin socket at the front 2 gearbox support winches (2-speed) 4 plastic mudguards Wheel chocks Rear light bar with mud flaps Paintwork: Chassis sandblasted, primed, and painted Reflective tape on sides and rear according to EU regulations If you have any questions, please do not hesitate to contact us at any time.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Automatic Carton Forming Machine – 8-15 Boxes/min For sale: Automatic Carton Forming / Case Erecting Machine JKX-15. Designed for automatic erection of cartons from flat blanks and bottom closure with adhesive tape. Corrugated carton blanks are loaded into the magazine, automatically picked up by vacuum suction, formed, and sealed. The machine features PLC control, integrated safety systems, and easy format changeover. Suitable for a wide range of industries including food, chemicals, detergents, and general packaging lines. Main Features: • Model: JKX-15 • Fully automatic carton forming and bottom sealing • Output: 8 – 15 cartons per minute • Automatic cardboard magazine • Vacuum pick-up for carton blanks • Bottom taping system • PLC control • Tool-free, quick size adjustment • Compact industrial footprint Technical Specifications: Minimum carton size: L 280 – 500 mm W 160 – 400 mm L + W: 510 – 1000 mm H + W / 2: 300 – 620 mm Air requirement: 6 kgf/cm² – 450 nl/min Hsdsyuta Eopfx Abveni Power consumption: 0.4 kW Power supply: 220 / 380 V – 50 Hz Forming speed: 8 – 15 boxes/min Machine dimensions: 2050 × 1950 × 1450 mm Condition: Machine is in very good condition and immediately ready for production.

Condition: used, Year of construction: 2019, Carton sealing machine Inventory no.: 3818 Manufacturer: Siat Type: S 8-S Year of manufacture: 2019 Maximum carton dimensions according to manufacturer (approx.): * Width: 120 - 500 mm * Height: (90) 130 - 500 mm * Length: unlimited * Tape width: (38) 50 mm Hnjdpfoyrh Irox Abvsi * Machine working height: adjustable * Very good condition

Condition: new, roll diameter 520 mm throat 520 mm workpiece height 310 mm cutting speed 25 - 500 m/min table surface area 600 x 500 mm band length 3.880 x 3-16 mm mm Table tiltable up to 15° Grad work height max. 1000 mm total power requirement 1,5 kW weight of the machine ca. 500 kg. dimensions of the machine ca. 1,3 x 0,76 x 2,14 m Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes Hnjdpsxaazxofx Abvji - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm wide available scope of delivery: - saw band - Tape welding device with annealing device - halogen light - Scissors - grindstone - Chip brush - blow-out device - LED digital display - Longitudinal table groove

Condition: used, Year of construction: 2021, only 24 operating hours – like new Base machine 1 pc Cutting technology meets the future The CONTROL series has always defined its own class – the premium class for vertical panel saws. But even this lead never stands still. We have developed the CONTROL into a vertical panel cutting centre of the premium class, with higher automation of the sawing process and additional equipment options. Above all, the 12" touchscreen computer and new machine software provide improved user comfort in every detail. Saw Frame • Precision manufacturing to 1/100 mm in key components • Massive, self-supporting welded saw frame with high torsional rigidity Hnsdsytrfqopfx Abvsi • Full-surface support panel made of birch plywood with integrated small parts shelf • Auxiliary stop profile with its own tape measure and 3 auxiliary stops for repeat cuts • Automatic detection of the center support • Automatic roller lock during the cutting process Saw Beam • Stable, durable steel saw beam construction • Automatic saw beam locking with cut position detection Saw Unit • Play-free, smooth-running guides • Robust motor carriage bearings ensure high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Enhanced operator comfort thanks to largely automated operation • Laser-assisted display of horizontal cuts • Automatic clamping of the motor carriage • Automatic plunging and swiveling of the saw motor • Pneumatic clutch for quick change to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake Control System • 12" touchscreen computer with optimal user guidance • Multilingual user interface • Tool database for high flexibility and absolute repeat accuracy • Fully automatic sawing process • Variable feed speeds from 10–25 m/min • Selectable saw cycle • Panel end detection • Constant return speed • Operating hours counter • Network connectivity Dimension Adjustment • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y including ABO (vertical axis for horizontal cuts) Design, Ergonomics • STRIEBIG’s signature product design • Multiple awards (including the Swiss Design Award) • Functionality and operator-friendly ergonomics Installation • Wall-mounted or free-standing (option) installation possible Note: Permissible ambient temperature: min. +5°C / max. +40°C Relative humidity: 19–95% If mains voltage fluctuations exceed ±10% of the nominal voltage at the installation site, a voltage stabilizer must be used. Type 5216 Cutting range 4300x2160/2016x80mm 1 pc Cutting length: 4300 mm Cutting height vertical cut: 2160 mm Cutting height horizontal cut: 2016 mm Max cutting depth: 80 mm Min cutting depth (automatic feed): 4 mm Min cutting depth (manual feed): 2 mm Exact installation dimensions can be found in the brochures or installation diagrams. ProLock Easy-Fix tool clamping system 1 pc Electronic positioning system "EPS-X" (horizontal axis for vertical cuts) 1 pc Paper holder 1 pc Small parts support, aluminum (2 pieces) 1 set Kit for free-standing installation (Types 5168, 5216, 5224, 6168, 6216, 6224) 1 set Storage location: Customer

Condition: new, maximum load weight: 35,450 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 12,740 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLA_RJ 3 / 1N ? 18/24 | Jumbo Low Loader | Extendable | Wheel Well | Ramps | 3 Axles Low neck height, small tires! 770 mm loading height Manufacturer: Kässbohrer Model: K.SLA_RJ 3 / 1N ? 18 / 24 Vehicle type: Extendable jumbo low loader with wheel wells Country of registration: Germany Year of manufacture: 2026 Color: RAL 3020 Traffic Red ----Technical Data Dimensions* * Overall length: 13,190 mm * Platform length: 9,240 mm * Extension: 3,500 mm * Gooseneck length: 3,950 mm * Platform height: 770 mm * Saddle height: 1,150 mm * Overall width: 2,550 mm + 600 mm side extension * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm * Locking position: 500 mm * Swing door at rear: 2,300 mm ----Weights * Unladen weight: approx. 12,556 kg * Permissible total weight (80 km/h): 48,000 kg * Permissible total weight (60 km/h): 52,800 kg * Axle load: 24,000 kg * Axle carrying capacity: 8,000 kg per axle * King pin load capacity: 15,000 kg ----Chassis / Axles * 3 BPW axles * Air suspension * 2 rigid axles at the front * 1 trailing axle at the rear * Lift axle on the 1st axle (load-dependent) * Automatic axle lift control from tractor unit * Air suspension with load gauge * ECAS electronic air suspension system ----Brake system / Electric * WABCO EBS 4S/3M * ABS * RSS roll stability support * Electro-pneumatic dual-circuit brake system * Lighting according to ECE R48 * Aspöck lighting system * Sockets: * 24N (ISO 1185) * 24S (ISO 3731) * 15-pin ADR (ISO 12098) ----Wheels / Tires * Tire size: 205/65 R17.5 * 12 wheels * Steel rims * M+S tires * 3PMSF winter tires * Tire pressure monitoring system * Spare wheel holder on bulkhead Hnsdpfxjyrkpxs Abvoi ----Chassis / Body * High-strength S700 MC steel frame * 2" king pin (bolted) * Gooseneck with 90° vertical corners * Partial metallization Zn/Al corrosion protection * 45 mm hardwood floor * Checker plate over the wheels ----Loading Area / Extensions * Side extension up to 300 mm * 100x100 box-section mounts * Galvanized steel extensions * Hardwood planks (3 × 100 mm) * Storage box for extension planks ----Wheel Well / Excavator Well * Wheel well for vehicle transport * Excavator well at rear * Width: 750 mm * Depth: 310 mm * Length: 3,000 mm * Wheel well bridges made of hardwood ----Ramps * Foldable loading ramps * Ramp capacity: 40 t * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulic sliding system * Ramp floor made of hardwood * Ramp securing with tension chain ----Load Security Lashing points: Gooseneck: * 2 × 2 pieces 5 t * 1 × 2 pieces 10 t Platform outside: * 3 × 2 pieces 5 t * 4 × 2 pieces 10 t Under outer frame: * 2 × 2 pieces 8 t Platform: * 4 × 2 pieces 6 t Further securing: * 5 × 2 stake pockets * 3 × 2 stake row pockets * 8 × 2 removable stakes * Container locks for 20 ft / 30 ft containers ----Equipment / Accessories * Toolbox (700 × 400 × 360 mm) * Rotating beacon * Rear work light * Extendable warning boards with LED * Side marking tape * Rear marking tape * Wheel chocks * Wabco Smartboard * Connection cable (NATO socket) For further information, please do not hesitate to contact us.

Condition: new, mileage: 100 km, power: 290 kW (394.29 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, loading space length: 8,800 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new Mercedes Benz Actros 2540L 6x2 for construction equipment and aerial work platform transport. Truck equipment: - Long-distance driver cab - Auxiliary heating - Safety package - Driver comfort package - Trailer package - Steerable trailing axle - LED rear lights - Euro 6e - Automatic transmission - Sun visor - Beacon lights - Multifunction steering wheel - 1 sleeping bunk - Refrigerator - Navigation - 26,000 kg GVW - Automatic climate control - White - for long-distance transport - etc. Body: - Body manufactured from laser-cut and bent special profiles in low-bed design - Body length approx. 8,800 mm minus toolbox approx. 490 mm - Frame height unladen approx. 1,050 mm - Frame width approx. 2,550 mm - 2 track ramps, each consisting of 1 fixed section and 1 extendable section, lateral sliding adjustment, grated surface, mechanical ramp locking with holders on outer frame for non-use (optionally with strap securing) - Ramp operation via electro-hydraulic unit, incl. emergency control at manifold block and hand pump for total system failure - Hydraulic rear supports - All hydraulic functions controlled via radio remote control - Grated floor with increased load capacity - Rear end with bevel – front bulkhead approx. 2,000 mm high with inward-bent profiles - Stainless steel toolbox inside in front of bulkhead - 2 stainless steel side toolboxes on the frame for lashing equipment (1 left, 1 right) - 1 stainless steel toolbox at rear right (for hydraulic unit and control block) - Work lights: 1 pair on rear cab wall, 2 pairs on frame sides, 2 pairs at rear - 2 sets of steps for access to the cargo area Load securing: - Longitudinal members incl. Multi-X contour with 2.5 t lashing points - 6 pairs of 6-ton lashing points integrated into longitudinal members - Outer frame perforated with 2.5 t lashing points - 6 pairs of 6-ton lashing points integrated into the outer frame - 4 x 6-ton lashing points at the rear - 4 x 6-ton lashing points below, in front of the front bulkhead toolbox Hsdpjw E Abnjfx Abvjni Paintwork: - Body powder coated in RAL 9005 black (KTL process) - Bulkhead painted in RAL 9005 black - Ramps and gratings hot-dip galvanized Markings: - Reflective tape on sides and rear to EU regulations. Further information available on request.

Condition: new, mileage: 100 km, power: 290 kW (394.29 HP), fuel type: diesel, gearing type: automatic, axle configuration: 3 axles, overall weight: 26,000 kg, loading space length: 8,800 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, color: white, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new Mercedes Benz Actros 2540L 6x2, configured as a construction machinery and access platform transporter. Truck equipment: - Long-distance driver cab - Auxiliary heater - Safety package - Driver comfort package - Trailer package - Steerable trailing axle - LED rear lights - Euro 6e - Automatic transmission - Sun visor - Beacon lights - Multifunction steering wheel - 1 sleeping bunk - Refrigerator - Navigation system - 26,000 kg gross vehicle weight - Automatic climate control - White - Long-distance specification - etc. Body: Hnodpfxsw E Abhj Abvoi - Superstructure made from laser-cut and bent special profiles, low-floor design - Body length approx. 8,800 mm (minus approx. 490 mm for storage box) - Frame height unladen approx. 1,050 mm - Frame width approx. 2,550 mm - 2 ramp units, each with 1 fixed section + 1 retractable section, ramps can be shifted laterally - Ramp surface made of grating, mechanical ramp locking including bracket on the outer frame for storage (straps available on request) - Ramp operation via electro-hydraulic aggregate, incl. emergency control unit on the control block and hand pump for total failure - Hydraulic rear supports - All hydraulic functions can be operated via radio remote control - Grating floor with increased load capacity - Rear with bevel, front wall approx. 2,000 mm high with inward-bent profiles - Stainless steel storage box inside in front of the front wall - 2 stainless steel side toolboxes on the chassis for lashing equipment (1 left, 1 right) - 1 stainless steel toolbox at rear right (for hydraulic unit and control block) - Working lights: 1 pair on the rear wall of the cab, 2 pairs on each chassis side, 2 pairs at the rear - 2 access ladders for load area access Load securing: - Longitudinal beams with Multi-X contour including lashing points (2.5 t each) - 6 pairs of 6 t lashing points integrated into the longitudinal beams - Outer frame with perforated design including 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into outer frame - 4 pcs. 6 t lashing points at the rear - 4 pcs. 6 t lashing points ahead of the front wall storage box (lower side) Paintwork: - Body KTL powder coated in RAL 9005 black - Front wall painted in RAL 9005 black - Ramps and gratings are hot-dip galvanized Markings: - Reflective tape on sides and rear according to EC standards. Further information available upon request.

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 Hnodpfxjgrzh Ej Abvsi 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection