Used Temperature Controle for sale (49,608)

Condition: used, Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclic loads and accelerated aging caused by temperature changes can reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving basket Load capacity of the moving basket: 50 kg for VT3 7012 S2 All-round grid in the moving basket secures the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The warm chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Rated voltage: 400 V Rated power: 10 kW Rated current: 25 A Refrigerant: R452A Cooling unit: water-cooled Shock cooling optional (nitrogen cooling) via customer-side nitrogen supply External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Control panel: IP20 Control cabinet: IP 54 Key figures for temperature tests in single-chamber operation Temperature range Warm chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: +_ 2 K in the steady state Temperature deviation spatially: +_ 2 K in the steady state in the moving basket Heating rate warm chamber: 11 K/min Cooling rate cold chamber: K/min Heating rate cold chamber: 2 K/min Cooling rate warm chamber: K/min Viewing window: 355 x 355 mm Pipe passage: 67 mm Year of manufacture: 2000 Operating hours: 104382 Gjdpfox Exmtjx Akhjkd Weight: 1000 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: used, The new, cold-regenerating adsorption dryer from Parker Zander combines proven and reliable elements of adsorption technology and impresses with its clear concept. Notable features of the K-MT adsorption dryer series include: • Adsorber profiles manufactured in one piece • Separately controlled main and blow-off valves in a leak-proof design • Compact check valve combination, guaranteeing continuous operational reliability and high availability. All adsorption dryers in the K-MT series feature: • Self-cleaning sieve trays on the wet side • High-quality drying agents During adsorption, the drying agent stores the moisture contained in the compressed air. Gkodpfoypb Dusx Akhsd Parker Zander exclusively uses highly active molecular sieve drying agents with a high capacity. This drying agent guarantees a long service life, even at high inlet temperatures or low pressure dew points. Regeneration takes place in counterflow to the adsorption process. A portion of the dried compressed air is depressurized to atmospheric pressure and passed through the drying agent bed to be regenerated. The moisture stored during adsorption is removed with the partial flow of dry regeneration air. The regeneration air requirement of 14.3% for cold-regenerating adsorption dryers refers to: • Operating pressure of 7 bar • Inlet temperature of 35°C • Pressure dew point of -40°C • in a cycle with • 5 minutes adsorption • 4 minutes desorption • 1 minute pressurization The Parker Zander 10-minute cycle, with 5 minutes of adsorption, includes 12 load changes per hour. The commonly used 6-minute cycle, with 3 minutes of adsorption, requires 20 load changes per hour and, therefore, inevitably 5.6% more regeneration. The Parker Zander 10-minute cycle saves energy costs while reducing wear and tear. Multitronic, the control system • with new, groundbreaking functions and in a new design, is perfectly tailored to the cold-regenerating adsorption dryers of the K-MT series. • It enables the highly effective adaptation of the adsorption dryer, even to extremely diverse operating conditions. • From the permanently visually recognizable status to the pressure dew point control of the adsorption dryer, the benefits for the operator are clearly evident with Multitronic. • The Multitronic system, housed in a clear and easily accessible control cabinet, offers: • A comfortable microprocessor control for all Parker Zander heatless dryer systems • Flexible adjustment of the cycle times is possible. • LEDs on the front for the individual functions, such as • Operation • Adsorption • Desorption • Selector switch I-0-2 for fixed cycles or variable cycles as a synchronous control with the compressor Possible options: • Direct pressure dew point measurement including digital display • A potential-free output for the pressure dew point limit value • The ability to set the desired dew point in the range of -25°C to -40°C. Technical data: K-MT 8 Capacity m³/h: 72 Connection: G ½ Pressure bar: 16 Weight kg: 77 Electrical connection Watt: 50 Year of construction: 2009 Manufacturer's price: €8,880

Condition: used, Vötsch Temperature testing chamber / Vibration testing chamber Vötsch VTV³ 7120-10 temperature testing chamber Temperature range: -70 °C to +180 °C Designed for combination with vibration / oscillation testing systems For sale is a used temperature testing chamber from the manufacturer Vötsch Industrietechnik / Weiss Technik. Suitable for temperature testing as well as testing in combination with vibration and oscillation testing systems, environmental simulation, material and component testing, as well as development, aging, and stress tests. Technical data: Manufacturer: Vötsch Industrietechnik / Weiss Technik Type: VTV³ 7120-10 Design: Customer-specific unit Simpac Device type: Temperature testing chamber / Vibration testing chamber Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1,150 liters Temperature change rate cooling: approx. 10.5 K/min Temperature change rate heating: approx. 12.0 K/min Gkjdpfez Ixwlex Akhod Test chamber dimensions (W × D × H): approx. 1,100 × 1,100 × 950 mm External dimensions (W × D × H): approx. 1,525 × 3,590 × 2,150 mm Weight: approx. 2,150 kg Refrigerant 1: R452A Quantity: 8.00 kg · GWP: 3,922 · CO₂ equivalent: 31.38 t Max. low pressure: 22.5 bar g · Max. high pressure: 25 bar g Refrigerant 2: R23 Quantity: 5.60 kg · GWP: 14,800 · CO₂ equivalent: 82.88 t Max. low pressure: 22.5 bar g · Max. high pressure: 25 bar g · Static pressure: 17 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 26 kW · Rated current: 49 A Equipment: Programmable touch panel control Temperature control Large stainless steel test chamber Observation window Test specimen ports Preparation for vibration / oscillation testing systems Water-cooled refrigeration unit Multi-stage refrigeration system Connection and supply components as shown in the pictures Application areas: Temperature and vibration testing Environmental simulation Material, electronics, and component testing Assembly and automotive testing Quality assurance Research and development Lifetime, aging, and stress tests Environmental Stress Screening (ESS) Condition: Used Optical condition as shown in the pictures Scope of delivery: 1 × Vötsch VTV³ 7120-10 temperature testing chamber Programmable touch panel Existing connection and supply components Accessories as shown in the pictures Shipping or freight shipping possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Andreas Schmid Climate and temperature test chamber KK 7.200/-50/180S 7,200-liter test chamber / Year of manufacture: 2016 Temperature and humidity tests Used climate chamber with a separate air-cooled Güntner condenser. Technical data: Manufacturer: Andreas Schmid Anlagentechnik GmbH Type: KK 7.200/-50/180S Year of manufacture: 2016 Test chamber volume: 7,200 liters Temperature specifications according to the manufacturer: Temperature control system: -50 °C to +180 °C Previously used for tests on active batteries. Air Liquide gas supply and pressure regulating unit: Completely mounted in a metal cabinet. Pressure regulator, pressure gauge, shut-off and flush valves, as well as pipelines and connecting hoses. All components installed on a common mounting plate in the cabinet. Climate range: +10 °C to +95 °C Humidity range: 10 % to 95 % RH According to the manufacturer's climate diagram Steam humidifier: 8 kg/h Heating: 5.0 K/min (-20 to +120 °C) Cooling: 5.0 K/min (+120 to -20 °C) Without test load Heating power: 36 kW Air circulation: 3 fans / 8,000 m³/h Refrigerant: R404A / 55 kg Connection: 400 V / 3 phases / 50 Hz Max. current: 100 A Gjdpfe Ai I T Tex Akhjkd Internal dimensions (W x D x H): 3,000 x 2,000 x 1,200 mm External dimensions: 3,300 x 3,200 x 2,500 mm With attachments: 3,600 x 3,300 x 3,100 mm Weight of chamber: 4,500 kg Empty weight of condenser: 460 kg Total weight: 4,960 kg without additional parts Equipment: V2A stainless steel interior Double-leaf door 2 heated viewing windows, each 600 x 500 mm 4 heated feedthroughs DN 150 Pressure equalization / Condensate drain Halogen lighting 200 W Program controller SE-702 STANGE ECS-2000-1 software on CD License documents and USB dongle available License rights not checked Güntner condenser, air-cooled: Type: GVV 090.2D/1-N(D).E Year of manufacture: 2016 Dimensions: 2,700 x 930 x 1,650 mm Application areas: Temperature and humidity tests Environmental simulation / Quality assurance Material and component testing Condition: Used Optical condition according to images Scope of supply: Andreas Schmid climate chamber Separate Güntner condenser 1 x Air Liquide gas control unit, completely mounted in a metal cabinet, with existing equipment as shown in the images STANGE CD, dongle, license documents Technical documentation as shown in the images Shipping by freight forwarder possible. Errors and prior sale excepted. We will be happy to answer any questions by phone.

Condition: used, VÖTSCH Vötsch VT³ 7012 S2 Industrial temperature shock test chamber with two temperature zones, 125-liter test chamber volume, and digital touchscreen control For sale is a Vötsch cold and heat shock test chamber of the type VT³ 7012 S2. This unit is suitable for testing components, electronic components, and materials under rapid temperature changes. The hot chamber has a temperature range of +50 to +220 °C, and the cold chamber has a temperature range of −80 to +70 °C. The test chamber has two temperature zones, a stainless steel test chamber, and a digital touchscreen control for setting and monitoring test programs and test cycles. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Model / Type: VT³ 7012 S2 Product type: Cold and heat shock test chamber / Temperature shock chamber Test chamber volume: approx. 125 liters (model specification) Temperature zones: 2 Operation: Digital touchscreen Weight: approx. 1,000 kg Temperature ranges: Hot chamber: +50 to +220 °C Cold chamber: −80 to +70 °C Temperature ranges according to technical model specifications. Electrical data: Rated voltage: 3/N/PE AC 400 V ± 10 % Mains frequency: 50 Hz Rated power: 10 kW Rated current: 25 A Refrigerant: R404A: 1.70 kg R23: 1.27 kg Pressure specifications: Maximum low pressure: 22.5 bar(g) Maximum high pressure: 25 bar(g) Standby pressure: 14 bar(g) Equipment: Two temperature zones for cold and heat shock testing Stainless steel test chamber Insulated test chamber door with viewing window Interior lighting Air circulation system with fans Digital touchscreen control with graphical user interface Digital temperature displays RS232 interface RS485/RS422 interface Connection options for external measuring and control functions Scope of supply: 1 × Vötsch VT³ 7012 S2 temperature shock test chamber with integrated touchscreen control and existing equipment as shown in the picture. Any further accessories not shown are not part of the offer. Condition: Gkodpfo Agm Ucox Akhod Used Optically well-maintained condition with typical signs of wear. Condition and scope of supply, see pictures. Tools, machines, and other items not explicitly mentioned are not part of the sale. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, VÖTSCH Vötsch VT³ 7012 S2 Temperature shock test chamber with two temperature zones 125 liter test chamber volume, water-cooled For sale is a used cold and thermal shock test chamber from Vötsch Industrietechnik GmbH. The system is used for testing components, electronic parts, and materials under rapid temperature changes. Features a digital touchscreen control and stainless steel test chamber. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VT³ 7012 S2 Year of manufacture: 2018 Operating hours: approx. 763 hrs Test chamber volume: approx. 125 liters (model specification) Temperature zones: 2 Cooling: water-cooled Temperature ranges: Warm chamber: 0 to +220 °C Cold chamber: -85 to +75 °C Temperature ranges according to workshop protocol. Electrical data: Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A Refrigerant according to nameplate: R449A: 1.70 kg R23: 1.27 kg Max. low pressure: 22.5 bar(g) Max. high pressure: 25 bar(g) Stand pressure R23: 14 bar(g) Equipment: Two temperature zones for cold and thermal shock testing Stainless steel test chamber Test chamber door with viewing window Interior lighting Digital touchscreen control Temperature displays Water-cooled refrigeration system Cooling water connections for supply and return RS232 interface according to workshop protocol Application areas: Temperature shock testing Thermal cycling Gkjdpfx Akj Aiucqshod Electronics and component testing Material testing Environmental simulation Quality assurance Research and development Condition: Used Optical condition according to pictures. Scope of supply: 1 × Vötsch VT³ 7012 S2 temperature shock test chamber Existing equipment according to pictures. Important note: For the safety of our customers, the following work will be carried out on the offered test and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, ESPEC Temperature Shock Chamber / Liquid-to-Liquid Shock Chamber ESPEC TSB-51 Temperature Shock Chamber Temperature range: Hot bath +70 °C to +200 °C / Cold bath -65 °C to 0 °C Approximately 13,611 operating hours Air-cooled For sale is a used liquid-to-liquid temperature shock chamber from the manufacturer ESPEC CORP. The temperature shock chamber is suitable for thermal shock testing, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. The system operates with a liquid-to-liquid testing process with a movable test basket between the hot and cold baths and features a programmable controller. Technical data: Manufacturer: ESPEC CORP. Type: TSB-51 Equipment type: Liquid-to-liquid temperature shock chamber Operating hours: approx. 13,611 h Temperature range, hot bath: +70 °C to +200 °C Temperature range, cold bath: -65 °C to 0 °C Bath volume: approx. 55 liters Test basket: 150 × 150 × 200 mm (W × H × D) Internal dimensions: 290 × 350 × 520 mm (W × H × D) External dimensions: 1200 × 1785 × 1320 mm (W × H × D) Weight according to nameplate: 800 kg Power connection: AC 400 V / 3-phase / 50 Hz Max. power consumption: 22 A Refrigerant 1: R404A Refrigerant quantity: 2.8 kg Refrigerant 2: R508A Refrigerant quantity: 0.89 kg Equipment: Programmable ESPEC controller with display Liquid-to-liquid temperature shock testing system Movable test basket Hot bath and cold bath Overcooling protection Overheating protection Operating hour counter RS-485 interface ESPEC OnlineConverter PN5-CN Ethernet and USB interfaces Operating manuals as shown in the pictures Application areas: Temperature shock testing Thermal cycle testing Material testing Electronics testing Component testing Automotive Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition as shown in the pictures Device powers on / Controller and display are active Scope of delivery: 1x ESPEC TSB-51 temperature shock chamber ESPEC OnlineConverter PN5-CN Operating manuals as shown in the pictures Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone. Gkedoz Hb Tyepfx Akhod

Condition: used, FEUTRON Temperature Test Chamber / Climate Simulation Chamber Feutron 3416/16-Ex / TPK 200 Temperature range: -75 °C to +150 °C Water-cooled cascade refrigeration system For sale is a used temperature test chamber from the manufacturer Feutron Klimasimulation GmbH. The temperature test chamber is suitable for temperature tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. Technical data: Manufacturer: Feutron Klimasimulation GmbH Type: 3416/16-Ex Series: TPK 200 Device type: Temperature test chamber Test chamber volume: 280 liters Temperature range: -75 °C to +150 °C Temperature deviation over time: ≤ ±0.5 K Temperature change rate: Heating: up to approx. 3.0 K/min on average Cooling: up to approx. 1.0 K/min on average Test chamber material: Stainless steel, material no. 1.4301 Test chamber insulation: CFC-free multi-layer insulation Number of shelves: 3 Lighting: 50 W Refrigeration system: Water-cooled semi-hermetic cascade system Refrigerant 1: R507 Refrigerant quantity: 2.5 kg Refrigerant 2: R23 Refrigerant quantity: 0.5 kg Cooling water connection: Cooling water pressure: min. approx. 2.0 bar / max. 6.0 bar Max. cooling water temperature inlet: approx. 18 °C Cooling water temperature outlet: approx. 30 °C Cooling water consumption on average: approx. 0.3 m³/h Power connection: 400 V / 3/N/PE AC / 50 Hz Max. simultaneous power consumption: 5.6 kW Fuse: 3 × 16 A, characteristic C Protection class: IP20 Feedthroughs: 1 × Ø 75 mm with cover cap 2 × Ø 75 mm on the side 1 × Ø 100 mm on the side Dimensions: approx. 1,500 × 1,075 × 2,140 mm (W × D × H) Weight: approx. 680 kg Equipment: Programmable Feutron control system LCD display Program and manual operation Up to 20 programs can be stored RS-232 interface Temperature monitoring 3 stainless steel shelves Test chamber lighting Observation window Several feedthroughs for test specimens Compressed air connection Cooling water supply and return Additional temperature controller Accessories according to images Areas of application: Temperature testing Environmental simulation Material testing Electronics testing Component testing Quality assurance Research and development Lifetime testing Aging and stress tests Condition: Used Device starts Control system and display are active Optical condition according to images Scope of delivery: 1 × Feutron 3416/16-Ex temperature test chamber Gkodpfx Akjz Hl Dvohed 3 × stainless steel shelves Fan / accessories according to images Documentation according to images The table shown in the photos and other items not explicitly mentioned are not part of the sale. Shipping or freight transport is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Vötsch Climate testing chamber / Temperature and humidity testing chamber Vötsch VC³ 7250 2,500-liter test chamber -70 °C to +180 °C / Touch panel control Water-cooled For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. For temperature and humidity tests, environmental simulation, and component testing. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 7250 Test chamber volume: 2,500 liters Weight: approx. 1,450 kg (manufacturer's specification) Temperature range: -70 °C to +180 °C Heating: 2.26 K/min Cooling: 1.35 K/min Time deviation: ±0.3 to ±1 K Homogeneity: ±0.5 to ±2 K Thermal compensation: 5,000 W at +20 °C at -20 °C (manufacturer's data) Internal dimensions (W × D × H): approx. 1,995 × 1,250 × 975 mm External/installation dimensions (W × D × H): approx. 3,750 × 1,450 × 2,260 mm Dimensions according to drawing. Electrical data according to nameplate: Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 17 kW Rated current: 30 A Degree of protection, control cabinet/control panel: IP54 Gksdpfxe Ai Scys Akhod Refrigerant according to label: R452A R23: 1.0 kg Max. low pressure: 18 bar(g) Max. high pressure: 25 bar(g) Standby pressure: 12 bar(g) Equipment: Touch panel operation Double-leaf test chamber door with viewing window Test chamber lighting: 2 × 24 V / 50 W Test item passage Ø 80 mm according to drawing Control cabinet and main switch panel Pressure equalization opening Condensate tray Water tank with level indicator Supply and disposal connections Test chamber load according to the manufacturer: Shelf: 30 kg; reinforced: 75 kg Insert shelf: 150 kg Test chamber total: max. 300 kg Special heavy-duty floor: max. 500 kg (optional) Application areas: Temperature and humidity testing Environmental simulation / Material testing Electronics and component testing Quality assurance / Research Condition: Used Optical condition according to pictures. Scope of delivery: 1 × Vötsch VC³ 7250 climate testing chamber Equipment according to pictures. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We will gladly answer any questions by telephone.

Condition: used, Vötsch Temperature shock test chamber / Shock test chamber Vötsch VT 7012 S2 temperature shock test chamber Two-chamber system for rapid temperature changes from -74 °C to +220 °C Water-cooled version with mobile cart and programmable control   For sale is a used temperature shock test chamber from the manufacturer Vötsch Industrietechnik GmbH.   The system is suitable for temperature shock and temperature cycling tests, environmental simulation, material testing, quality assurance, electronics and component testing as well as development, aging and stress tests.   The test chamber operates with a hot and a cold chamber. The test specimen is moved between the two temperature zones via a mobile cart. The system features an observation window, test chamber lighting and programmable control.   Technical data:   Manufacturer: Vötsch Industrietechnik GmbH Type: VT 7012 S2 Equipment type: Temperature shock test chamber / Shock test chamber Version: Two-chamber system / water-cooled   Temperature range, hot chamber: +50 °C to +220 °C Temperature range, cold chamber: -74 °C to +70 °C Temperature deviation over time: ±1.0 K Temperature deviation spatially: ±2.0 K   Heating rate, hot chamber: approx. 11.0 K/min Cooling rate, cold chamber: approx. 3 K/min Heating rate, cold chamber: approx. 2.0 K/min   Test chamber volume: approx. 125 liters Test chamber dimensions: 470 × 410 × 650 mm (W × H × D) Max. load capacity, mobile cart: 40 kg Max. total load capacity, mobile cart: 20 kg Pipe passage: Ø 67 mm   Refrigerant 1: R404A Refrigerant quantity: 2.5 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g   Refrigerant 2: R23 Refrigerant quantity: 1.1 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Standby pressure: 13 bar g   Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A On-site fuse: 32 A slow-blow Compressor power: 2 × 3 kW   Cooling water supply: Inlet pressure: 3 to 6 bar Differential pressure, inlet and outlet: ≥2.5 bar Water connection: R 3/4" internal thread   Dimensions: External dimensions: approx. 975 × 2,115 × 1,675 mm (W × D × H) Weight: approx. 1,000 kg   Equipment:   Two-chamber temperature shock system Hot chamber Cold chamber Motorized mobile cart Programmable control Manual operation Automatic operation Shock test operation Observation window Test chamber lighting Pipe passage Ø 67 mm Water-cooled refrigeration unit Signal light Operator terminal Accessories according to images   Application areas:   Temperature shock testing Temperature cycling testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Quality assurance Research and development Service life testing Aging and stress tests   Condition:   Used Optical condition according to images   Scope of delivery:   1x Vötsch VT 7012 S2 temperature shock test chamber Operator terminal Original operating manual Accessories according to images   Important note: For the safety of our customers, the following work will be carried out on the offered test and climate systems in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection   The table shown in the photos or any other items not expressly mentioned are not included in the sale.   Shipping or freight forwarding possible. Gkedpjz Ehuuofx Akhod Subject to changes, errors and prior sale.   We wi

Condition: used, functionality: fully functional, overall weight: 1 kg, total length: 150 mm, total width: 100 mm, total height: 100 mm, input voltage: 24 V, B&R X20SL8101 SafeLOGIC Safety Controller – Ethernet POWERLINK Programmable safety controller from the B&R X20 series with an integrated bus controller, POWERLINK interface, and openSAFETY communication for industrial safety applications. Manufacturer: B&R Industrial Automation Type: X20SL8101 Series: X20 SafeLOGIC Gkodpfx Ake Aia A Uehsd Module type: Safety controller / Central unit Integrated bus controller: Yes Safety communication: openSAFETY Maximum number of SafeNODEs: 280 Programming: Automation Studio / SafeDESIGNER Safety level: Up to SIL 3 according to IEC 61508 / IEC 62061 Performance Level: Up to PL e, Category 4 according to ISO 13849-1 Interface: Ethernet POWERLINK POWERLINK function: Controlled Node Connections: 2 x shielded RJ45 ports (integrated hub) Transmission standard: 100BASE-TX Transmission rate: 100 Mbit/s Maximum cable length: 100 m between two nodes Minimum fieldbus cycle time: 200 µs Minimum X2X link cycle time: 200 µs Autonegotiation: Yes Auto-MDI/MDIX: Yes Operating mode: Half-duplex Standalone operation: Yes Dynamic Node Allocation (DNA): Supported Supply voltage: 24 V DC (-15 % / +20 %) Maximum input current SL/BC/X2X: 0.9 A Power consumption: 5.3 W Power consumption I/O internal: 0.6 W Power consumption X2X link supply: 1.42 W Output rated power SL/BC/X2X supply: 7 W I/O output rated voltage: 24 V DC Permissible contact load I/O supply: 10 A Maximum number of function block instances: 4096 Memory for flags: 262,144 bytes Stack memory: 32,768 bytes Memory for safe input data: 6144 bytes Memory for safe output data: 2048 bytes Storage medium: Replaceable SafeKEY Potential isolation: Fieldbus to X2X link and I/O Cooling: Fanless Status indicators: CPU, POWERLINK, SafeKEY Protection class: IP20 Operating temperature in horizontal mounting: 0 to +60 °C Operating temperature in vertical mounting: 0 to +45 °C Storage temperature: -40 to +85 °C Relative humidity: 5–95 %, non-condensing Dimensions (W x H x D): 62.5 x 99 x 75 mm Weight: 190 g B&R ID code: 0xE649

Condition: used, Vötsch Temperature Shock Chamber / Shock Test Chamber Vötsch VT 7012 S2 Temperature Shock Chamber Two-chamber system for rapid temperature changes from -80 °C to +220 °C Water-cooled version with a mobile cart and programmable controller For sale is a used temperature shock chamber from the manufacturer Vötsch Industrietechnik GmbH. The system is suitable for temperature shock and temperature cycling tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. The test chamber operates with a hot and a cold chamber. The test specimen is moved between the two temperature zones using a mobile cart. The system has an observation window, test chamber lighting, and a programmable controller. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VT 7012 S2 Device type: Temperature shock chamber / Shock test chamber Version: Two-chamber system / water-cooled Temperature range, hot chamber: +50 °C to +220 °C Temperature range, cold chamber: -80 °C to +70 °C Temperature deviation (time): ±1.0 K Temperature deviation (spatial): ±2.0 K Heating rate, hot chamber: approx. 11.0 K/min Cooling rate, cold chamber: approx. 3 K/min Heating rate, cold chamber: approx. 2.0 K/min Test chamber volume: approx. 125 liters Test chamber dimensions: 470 × 410 × 650 mm (W × H × D) Max. load capacity, mobile cart: 40 kg Max. total load capacity, mobile cart: 20 kg Pipe connection: Ø 67 mm Refrigerant 1: R404A Refrigerant quantity: 2.5 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Gkjdpjz Ehrgjfx Akhsd Refrigerant 2: R23 Refrigerant quantity: 1.1 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Standby pressure: 13 bar g Power supply: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A On-site fuse: 32 A slow-blow Compressor power: 2 × 3 kW Cooling water supply: Inlet pressure: 3 to 6 bar Differential pressure, inlet and outlet: ≥2.5 bar Water connection: R 3/4" internal thread Dimensions: External dimensions: approx. 975 × 2,115 × 1,675 mm (W × D × H) Weight: approx. 1,000 kg Equipment: Two-chamber temperature shock system Hot chamber Cold chamber Motor-driven mobile cart Programmable controller Manual operation Automatic operation Shock test operation Observation window Test chamber lighting Pipe connection Ø 67 mm Water-cooled refrigeration system Signal light Control terminal Accessories as shown in the pictures Application areas: Temperature shock testing Temperature cycling testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition as shown in the pictures Scope of delivery: 1x Vötsch VT 7012 S2 Temperature Shock Chamber Control terminal Original operating manual Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table or other items not explicitly mentioned in the photos are not part of the sale. Shipping or forwarding possible. Subject to changes, errors and prior sale. We are happy to answer further questions by phone.

Condition: used, Vötsch   Temperature Test Chamber / Climatic Chamber   Vötsch VTS 7027-10 Temperature Test Chamber Temperature range from -70 °C to +180 °C Approx. 270 liters / fast temperature changes / water-cooled   For sale is a used temperature test chamber from the manufacturer Vötsch Industrietechnik GmbH.   The temperature test chamber is suitable for temperature tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests.   The unit features a programmable touch panel control, a large viewing window, a stainless steel test chamber, and side openings for test specimens.   Technical data:   Manufacturer: Vötsch Industrietechnik GmbH Type: VTS 7027-10 Device type: Temperature test chamber Year of manufacture: 2002 Test chamber volume: approx. 270 liters   Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 10 K/min Temperature change rate (cooling): approx. 14.5 K/min Temperature deviation (time): ±0.3 to ±0.8 K Temperature deviation (spatial): ±0.5 to ±2 K   Refrigerant 1: R404A Refrigerant quantity: 8 kg Max. high-side pressure: 25 bar g   Refrigerant 2: R23 Refrigerant quantity: 2.1 kg Max. low-side pressure: 19 bar g Max. high-side pressure: 25 bar g Static pressure: 17 bar g Gkodpfx Aksz A A Ecohsd   Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 14 kW Rated current: 26 A   Dimensions and weight:   Test chamber volume: approx. 270 liters Internal dimensions (W × D × H): approx. 580 × 620 × 750 mm External dimensions (W × D × H): approx. 870 × 1,895 × 1,775 mm Weight according to series documentation, without options: approx. 835 kg   Equipment:   Programmable touch panel control S!MCON/32-NET control, monitoring, and regulation system Water-cooled refrigeration unit Interior made of stainless steel Large viewing window Test chamber lighting Side openings for test specimens Stainless steel shelves Adjustable temperature limiter Software temperature limiter RS232 interface   Cooling water inlet and cooling water outlet Programmable test operation Touch panel swiveling / removable   Application areas:   Temperature testing Temperature cycle testing Environmental Stress Screening (ESS) Environmental simulation Material testing Electronics testing Component testing Assembly testing Quality assurance Research and development Lifetime testing Aging and stress tests   Condition:   Used Optical condition according to pictures   Scope of delivery:   1x Vötsch VTS 7027-10 temperature test chamber Touch panel control Stainless steel inserts according to pictures Accessories according to pictures   Important note: For the safety of our customers, the following work will be carried out on the offered test and climate systems in advance: 1. Functional test and replacement of any necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection   Shipping or freight forwarding possible. Subject to changes, errors and prior sale.   We will be happy to answer any further questions by telephone.

Condition: used, Vötsch Temperature Test Chamber / Climate Test Chamber Vötsch VTS 7027-15 Temperature Test Chamber Temperature range from -70 °C to +180 °C Approx. 270 liters / Heating up to 15 K/min / Cooling down 15 K/min For sale is a used temperature test chamber from Vötsch Industrietechnik GmbH. The test chamber is suitable for rapid temperature cycling tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. The unit features a programmable touch panel control, a large viewing window, a stainless steel test chamber, and side access ports for test specimens. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VTS 7027-15 Device type: Temperature test chamber / Climate test chamber Test chamber volume: approx. 270 liters Temperature range: -72 °C to +180 °C Heating rate: approx. 18 K/min Cooling rate: approx. 18 K/min Temperature deviation (temporal): ±0.1 to ±0.5 K Temperature homogeneity (spatial): ±0.5 to ±2 K Heat compensation at -20 °C: approx. 8,000 W Heat compensation at +20 °C: approx. 8,000 W Refrigerant 1: R404A Refrigerant quantity: 6.5 kg Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 2.3 kg Max. high pressure: 25 bar g Standby pressure: 17 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 16 kW Rated current: 31 A Cooling: Water-cooled version Cooling water inlet and outlet available Dimensions and weight: Test chamber volume: approx. 270 liters Internal dimensions (W × D × H): approx. 580 × 620 × 750 mm External dimensions (W × D × H): approx. 870 × 1,895 × 1,775 mm Weight according to model series documentation: approx. 835 kg Equipment: Programmable touch panel control S!MCON/32-NET control, monitoring, and regulation system Water-cooled refrigeration unit Interior made of stainless steel Large viewing window Test chamber lighting Side access ports for test specimens Stainless steel grid shelves Adjustable temperature limiter Main switch RS232 interface Power socket 220–240 V AC, max. 2 A Programmed operation and manual operation Application areas: Temperature testing Temperature cycling testing Environmental Stress Screening / ESS Material testing Electronics testing Component testing Assembly testing Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition according to images Scope of delivery: 1x Vötsch VTS 7027-15 Temperature Test Chamber Programmable touch panel Stainless steel inserts according to images Accessories according to images Important note: For the safety of our customers, the following work will be carried out on the offered test and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight shipping possible. Gkedpfsz A U N Tox Akhsd Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, Vötsch   Type: VCS³ 7027-10   Vötsch climate testing chamber, water-cooled With a temperature change rate of 10 K/min   Data for temperature testing: Temperature range: -72°C to +180°C Temporal temperature deviation in the center of the usable space: ± 0.3 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K   Temperature change rate Heating: 10 K/min Cooling: 14.5 K/min   Data for climate testing: Temperature range: +10°C to +95°C (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours) Temporal temperature deviation in the center of the usable space: ± 0.2 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Temporal humidity deviation in the center of the usable space: ± 1% to ± 3% RH Humidity range: 10% to 98% RH (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours)   External dimensions: Width 780 x Depth 1895 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 615 x Height 750 (mm) Test chamber volume: approx. 270 liters   Side opening: 50 mm Side opening: 125 mm   Data for operation: LED strip 24 V, 6.8 W / 2 x halogen bulb 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ± 10%, 50 Hz Rated power: 14 kW Rated current: 26 A Fuse, on customer’s side: 63 A, slow-blow   Refrigerant: R404A/R-23   Weight approx. 835 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by phone. Gkedpfx Aezh Huuskhod

Condition: used, Epson Type: G20-A01SR / RC180 Gjdezh U S Ujpfx Akhekd Epson SCARA robot with Epson robot controller Epson SCARA G20 Long arm with high force The G20 manipulators are suitable for very high payload capacities, such as heavy components or packaging units with high weight (up to 20 kg). Epson G20 Max. payload: 20 kg, Reach: 850 / 1,000 mm, Z-stroke: 180 / 420 mm Epson controller RC180 Condition: untested / defective replacement! Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Weiss   Type: WT3-600/40   Weiss temperature test chamber with S!MCON / 32 control, air-cooled   (Refrigerant converted to R-452A)   Control panel: "Touchpanel" All control and operating commands can be initiated on the "Touchpanel" control panel by simply touching the function symbols.   Adjustable feet To compensate for uneven floors and to ensure adequate ventilation of the machine, the test chamber is equipped with adjustable feet.   Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be placed inside the test chamber.   Feedthrough installed as standard R1: 125 mm nominal diameter L1: 50 mm nominal diameter Godjzga Huspfx Akhjkd   Test chamber volume: approx. 600 liters   External dimensions with hinges and door latch Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door latch Height 1995 mm, Width 1000 mm, Depth 1660 mm   Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm   Data for temperature tests:   Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K   Temperature change rate (according to IEC 60068-3-5) Heating: 4.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 2500 W   Data for operation:   Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power 7.8 kW Fuse on customer side: 16 A, slow-blow   Sound pressure level approx. Measured at a distance of 1 m from the front, 1 m height: 61 dB(A)   Refrigerant: R-452A   Weight: 620 kg   For your safety as a buyer, here is the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data and information are subject to change!)   We are happy to answer any further questions you may have by telephone.

Condition: used, CTS Type: C-70/600 CTS C-70/600 climate testing chamber air-cooled version with observation window, test specimen protection, and documentation For sale is a high-quality CTS climate testing chamber, type C-70/600, for precise temperature and climate testing in research, development, quality assurance, and industry. Technical data: Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Rated power: 8.7 kW Rated current: 14.8 A Protection class: IP 22 Refrigerant: R404A (pre-cooling stage) / R23 (cooling stage) Cascade refrigeration system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment / Features: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Test specimen protection / temperature limiter Water connection / demineralized water supply Test chamber and condensate drain Pipe penetrations on the side of the test chamber RS232 interface according to documentation Digital outputs for test specimen control Test chamber dimensions according to documentation: Gjdpey Hkazsfx Akhjkd approx. 850 x 850 x 830 mm External dimensions according to documentation: approx. 1900 x 1115 x 1850 mm Weight according to documentation: approx. 600 kg Scope of supply: CTS climate testing chamber C-70/600 including existing documentation / operating instructions Scope of supply as shown in the pictures For your safety as a buyer: The unit can be inspected by arrangement. Loading with a forklift can be arranged. For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), mileage: 850,267 km, power: 294 kW (399.73 HP), first registration: 08/2012, fuel type: diesel, tire condition: 50 %, axle configuration: 6x2, fuel: diesel, color: silver, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, number of seats: 2, Equipment: ABS, crane, electric window regulation, power mirror, = Additional options and accessories = - Adaptive damping system - Alarm system - Steering wheel audio controls - Sun visor = Remarks = Crane Number of hydraulic extensions: 3 Remote control: ✓ Beautiful MAN TGX 26.400 configured as a CRANE TRUCK!! In addition to the options already mentioned, it features: -Manual transmission -Palfinger PK34002 SH-B -34 tm crane -3x hydraulically extendable -Remote control -2 beds -stand-alone air conditioner etc etc Optionally available with a trailer German combination directly from the first owner! = More information = General information Year of construction: 2012 Operating hours: 3.737 Axle configuration Tyre profile: 50% Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Steering Weights Empty weight: 16.170 kg Carrying capacity: 9.830 kg GVW: 26.000 kg Functional Crane: Palfinger PK34002 SH-B, year of manufacture 2011, on rear of chassis Extendable superstructure: Yes Condition Technical condition: very good Visual appearance: very good Damages: none Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. Gsdpjz A Tmwofx Akhokd You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: used, This listing is for the Broadley James Flow Controller S/601. The unit is in full working condition and ready for immediate use. This precision gas flow controller is designed for demanding bioprocessing environments. It features a clear digital interface for accurate monitoring and control of flow rates, ensuring optimal conditions for cell culture and fermentation. Robust and dependable, it integrates seamlessly into existing laboratory workflows Gkodpfxjyw Iwfo Akhed

Condition: used, 80 Control Units Electronics / PLC Controls Manufacturer: FESTO Type: CPX-CEC-C1 Condition: Good used condition. Fully functional prior to removal. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Gkodszvhnfspfx Akhsd Subject to technical changes, errors, and prior sale.

Condition: used, Bosch aico Type: SR8 Swivel-arm robot SR8 with Kollmorgen control unit Swivel-arm robot Control unit Kollmorgen Type: RDS2000 Robot including control unit, PC, cables, etc. Condition: used Gkjdpfx Aksb D H Nlshjd Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, This listing is for GE Axichrom Master 300-1000 Control Tower + GE AxiChrom 300/300 mm Chromatography Column. The unit is in full working condition and ready for immediate use. Godpjxxycaefx Akhokd Automated biopharmaceutical column packing system optimizing resin performance for purification

Condition: excellent (used), 3-phase follow-up controller for asymmetrical load (current controller for constant voltage) Additional data: Gkjdpfextu Tiex Akhsd see photos of the nameplates

Condition: used, Year of construction: 2001, functionality: fully functional, 1,0 St. gebr. Temperiergerät Hersteller: REGLOPLAS Typ: P140/9/SG51/1K/RT45 Baujahr: 2001 Medium: Wasser Gksdpjxyt Tbofx Akhod Temperatur: 140° C Heizleistung: 9 kW