Used Thread Coiler for sale (2,596)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Success:
Your message has been sent.
Listing
Wiefelstede
785 km
Extraction machine for taps, defective
Electro ARC2 DB
Call
Year of construction: 1985, condition: repair required (used), Extraction machine for taps
-Handover in the current condition as seen
-Current consumption: too high, machine as spare parts carrier
-Manufacturer: Electro ARC, extraction machine for taps or similar tools
-Clamping table: 660 x 460 mm
-Outreach: 250 to 480 mm
-Columns Ø: 70 mm
-Dimensions: 930/780/H2045 mm
Hnjdji Huvhepfx Akuew
-Weight: 402 kg
Success:
Your message has been sent.
Listing
Barsbüttel
902 km
Center Lathe
SALTECSL6240x1000
Call
Condition: used, machine/vehicle number: 170009, turning diameter over bed:400 mm
turning diameter over slide rest:250 mm
turning length:1000 mm
max swing over gap:520 mm
Height of centres:200 mm
crossed path:230 mm
bed width:218 mm
main spindle bore:52 mm
spindle size:MK 6
speeds::55-2000 U/min
turning angle of tool post:90 grad
tail stock:50 mm
taper in tailstock:MK 4
threading metric:0,4-7 mm
threading WHITWORTH:4-60 TPI
total power requirement:2,2 kW
dimensions of the machine ca.:1940 x 820 x 1545 mm
weight of the machine ca.:750 kg
tailstock quill:110 mm
tapping modul:0,4-3 mm
tapping diametral:8-84 Gang/Zoll
Hsdpfjdmrcrsx Akuenw
Success:
Your message has been sent.
Listing
Gütersloh
869 km
Hole punching press Peddinghaus Stanzfix 20
PeddinghausStanzfix 20
Call
Condition: used, Punching force: 200 kN
Thread, for example a 13 mm hole in 12 mm steel
Viewfinder via handwheel
Hsdpfxormudgj Akuonw
Assortment of tools is included in the price
Success:
Your message has been sent.
Listing
Borken
785 km
CTS climate chamber -70/+180°C
LDS V850-440 VibrationsprüfanlageShaker System SPA30KCE / IMV K2
Call
Condition: excellent (used), LDS / CTS Vibration Testing System
Type: V850-440 LPT 750C + CTS CV-70/1100-5
Manufacturer: LDS / CTS / IMV
For sale is a complete electrodynamic vibration testing system consisting of an LDS shaker system, an LDS SPA30KCE power amplifier, an IMV K2+ vibration controller, and a CTS climate chamber.
Suitable for combined vibration and climate testing in the automotive, aerospace, electronics testing, research & development, material testing, and industrial quality assurance fields.
The blue hall crane / portal crane visible in the pictures is not included in the scope of supply.
Shaker / Vibrator
Manufacturer: Ling Dynamic Systems Ltd. (LDS)
Type: V850-440 LPT 750C
Air-cooled electrodynamic vibrator.
Armature diameter: 440 mm
Frequency range: DC – 3000 Hz
Resonant frequency: approx. 2200 Hz
Sine force: approx. 22.2 kN peak
Random force: approx. 22.2 kN RMS
Shock force: approx. 66.7 kN peak
Max. velocity: 2.0 m/s
Displacement: 50.8 mm pk-pk
Internal load capacity: approx. 350 kg
Compressed air supply required:
Load support: approx. 5.5 bar
Air isolation: approx. 6.9 bar
Shaker weight: approx. 1,300 kg
Power Amplifier
Manufacturer: LDS
Type: SPA30KCE
Class-D high-performance switching amplifier.
Supply voltage:
50 Hz: 380 / 400 / 415 / 440 V
60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 / 520 V
Current setting: 400 V
Max. input power: 38.14 kVA
Max. output power: 21.0 kW
Output voltage: 100 V RMS
Amplifier weight: approx. 550 kg
Hnjdpfxsy Sy Nps Akuew
Controller
IMV K2+ Vibration Control System
Multi-channel vibration controller including Dell Precision PC system.
Functions:
Sine
Resonance dwell
Limit control
Random
Sine-on-random
PSD limit control
Shock
Scheduler
System monitor
CTS Climate Chamber
Manufacturer: CTS Clima Temperatur Systeme GmbH
Type: CV-70/1100-5
Year of manufacture: 10/2019
Temperature range: -70 °C to +180 °C
Humidity range: 10 % to 95 % RH
Rated voltage: 400 V / 3/N / 50 Hz
Power: 15.9 kW
Refrigerant:
R452A: 6.8 kg
R23: 2.1 kg
Equipment
Combined climate and vibration testing
Slip table / Fixturing table included
Completely wired testing system
Service and maintenance documentation available
Slip table:
Mounting area: approx. 760 x 850 mm
Threaded insert spacing: approx. 100 mm
Dimensions / Weight
Large industrial system / heavy-duty system.
Total system weight: approx. 6,000 – 7,000 kg
Transport exclusively via a suitable heavy-duty transport company.
Dimensions, weights and technical data are partially estimated or not completely known.
Condition
Used industrial system from industrial use.
Optical condition, see pictures.
Inspection and testing on site possible by arrangement.
Scope of supply
LDS V850-440 LPT 750C shaker system
LDS SPA30KCE power amplifier
IMV K2+ vibration controller
Dell Precision PC system
CTS climate chamber CV-70/1100-5
Slip table / Fixturing table
Accessories and documentation as shown in the pictures
Not included in the scope of supply:
Blue hall crane / portal crane.
Loading possible by arrangement.
Commercial sale without warranty.
Subject to changes, errors and prior sale.
Success:
Your message has been sent.
Listing
Borken
785 km
CTS temperature chamber CTS T-40/2000 Temp. -40°C to +180°C 2000 liters
CTST-40/2000
Call
Condition: used, CTS
Type: T-40/2000
Air-cooled temperature test chamber
Technical design:
Refrigeration unit:
air-cooled, low-noise, hermetically sealed, stepless power adjustment
via electronic monitoring and control system,
environmentally friendly refrigerant R404A
Door:
fully opening door, left-hand door stop,
one-hand operation, lockable.
Insert shelf:
stainless steel, support area 970 x 980 + 500 mm
load per shelf max. 35 kg
total load with max. shelf load 100 kg
Test chamber lighting: 3x halogen lamp 20 W, 12 V
Control:
32-bit controller
LCD control panel
Digital display of setpoint and actual values
Numerical input of setpoints
Plain text error messages
RS 232 interface
free switching channels for on-site control of the test item
Temperature range: -40°C to +180°C
Rated voltage: 400V 3/N 50Hz
Rated power: 10.4 kW
Rated current: 17.2 A
Compressor: TFH2516Z
Pipe connection NW 50
Control panel
Window 570x710 mm
Electrical connection, cable length 5m
Technical performance data:
Temperature tests:
Temperature range -40°C to +180°C
Temperature deviation ≤ ±0.3 K over time
Temperature change rate according to IEC 60068-3-5
Heating 2.5 K/min
Cooling 1.5 K/min
Heat radiation:
approx. 2500 W at +20°C
approx. 2100 W at ± 0°C
approx. 1500 W at -20°C
The technical data refer to an ambient temperature of +25 °C,
rated voltage 400V, without test item, without radiation and without additional devices.
Dimensions:
Test volume: 2000 liters
Test chamber dimensions: height 900, width 975, depth 2200 mm
External dimensions: height 1950, width 1290, depth 3145 mm
Operating data:
Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz
Rated power: 17.2 kW
Protection class: IP 22
Condensate drain, non-pressurized, R 1/2" internal thread
Sound pressure level (according to DIN EN ISO 3744
measured at a distance of 1m from the front) < 55 dB(A)
Weight: approx. 1200 kg
For your safety as a buyer, the following information!
The following points are carried out on our offered chambers in advance:
Hsdpfx Ajzg Twaekusnw
1. Functional check and replacement of necessary components
2. If necessary, new filling with legally compliant refrigerant
3. Leak test with certificate
4. After successful inspection, the chambers are subjected to a documented test run.
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data and specifications are subject to change!)
We would be happy to answer any further questions you may have by telephone.
Success:
Your message has been sent.
Listing
Borken
785 km
CTS TSS-70/130 Thermal Shock Test Chamber -80°C to +200°C, 130 liters, water-cooled
CTSTSS-70/130
Call
Condition: used, CTS
Temperature Shock Chamber / Temperature Test Chamber
CTS TSS-70/130 Temperature Shock Chamber
Water-cooled temperature shock chamber, approx. 130 liters
For sale is a used temperature shock chamber
from the manufacturer CTS Clima Temperatur Systeme GmbH.
The test chamber is suitable for temperature shock tests,
cyclic temperature tests, material testing, quality assurance
as well as development and stress tests.
Technical data
Manufacturer: CTS Clima Temperatur Systeme GmbH
Type: TSS-70/130
Device type: Temperature shock chamber / Temperature test chamber
Test volume: approx. 130 liters
External dimensions: approx. 2335 x 940 x 1820 mm (W x D x H)
Internal dimensions: approx. 1990 x 940 x 1652 mm (W x D x H)
Test chamber dimensions: approx. 480 x 660 x 410 mm (W x D x H)
Window: approx. 300 x 300 mm
Weight: approx. 950 kg
Temperature range, hot chamber: +50 °C to +200 °C
Temperature range, cold chamber: -80 °C to +100 °C
Temperature change rate: max. 100 K/min on average
Changeover time: < 10 seconds
Ramp-up rate: ≤ 15 min in the range of -65 °C to +200 °C
Heating rate: approx. 6 K/min from room temperature to +180 °C
Cooling rate: approx. 4 K/min from room temperature to -60 °C
Temperature deviation (time): ±1 K
Temperature deviation (spatial): ±2 K
Power connection: 400 V 3/N / 50 Hz
Power: 16.6 kW
Rated current: 28.0 A
Fuse rating: 32 A slow-blow
Protection class: IP22
Refrigerant, precooling stage: R404A
Refrigerant quantity, precooling stage: 4.0 kg
Refrigerant, cooling stage: R23
Refrigerant quantity, cooling stage: 0.6 kg / 10 bar
Operating pressure PS: 25 bar
Water-cooled version
Cooling water connection required
Compressed air connection required
Operation only possible with cooling water and compressed air
Cooling water inlet: 3–6 bar
Hnsdozf Ibkepfx Akuew
Equipment
CTS control panel
Microprocessor-controlled control and monitoring system
Program operation
Digital setpoint and actual value display
RS232 interface
RS485 interfaces
Potential-free contact
Digital inputs and outputs
Hot and cold chamber
Mobile frame with screw drive
Test chamber / mobile frame made of stainless steel
Insert tray made of stainless steel wire
Pipe penetration NW 50 with sealing plug
Compressed air connection 1/4" male thread
Condensate drain R 1/2" female thread
Safety door locking
Lockable door with viewing window
Documentation / operating manual
Accessories according to images
Application areas
Temperature shock testing
Cyclic temperature testing
Material testing
Electronics testing
Component testing
Aging tests
Quality assurance
Research and development
Condition
Used
Optical condition according to images
Scope of delivery
1x CTS TSS-70/130 temperature shock chamber
Insert tray / test chamber equipment
Available documentation / documents
Operating manual
Accessories according to images
Important note:
For the safety of our customers, the following work will be carried out on the offered climate chambers in advance:
1. Functional check and replacement of any necessary components
2. If necessary, refilling with legally compliant refrigerant
3. Leak test with certificate
4. Documented test run after successful inspection
Objects,
machines or other accessories shown in the images
that are not explicitly described
are not included in the scope of delivery.
Shipping or freight forwarding possible.
Subject to changes, errors and prior sale.
We are happy to answer any further questions by telephone.
Success:
Your message has been sent.
Listing
Sheffield
256 km
Cogsdill boring head
CogsdillZX300-TC-SK50
Call
Condition: excellent (used), Year of construction: 2006, A full set of 5 Cogsdill Boring, facing, and contouring heads.
Comprising -
ZX300 Facing & Contouring Head
Bi-directional Stub Tool
Seat Pocket Tool
Single Slide Tool
Valve Seat Pocket Tool
Extension and support bars included, with bespoke stand as shown.
Operations include:
Boring, Facing, Contouring, Threading
Hedpfxsz Erx De Akuenw
Taper Boring, Deep Cavity Boring
Grooving. Profiling, Back-spotfacing
Chamfering, Bottle Boring. Radii
Success:
Your message has been sent.
Listing
Borken
785 km
BAT magnesium shaker fixture cube 300x300x300 mm clamping cube vibration test stand M8
Helmut FischerBAT Shaker Fixture Cube
Call
Condition: used, BAT
Shaker Fixture Cube / Clamping Cube
Magnesium Shaker Fixture Cube
Professional clamping cube for vibration testing rigs / shakers
with an M8 thread grid for flexible test specimen mounting
For sale is a used clamping cube
for vibration and shock testing rigs.
The adapter cube is used to securely hold test specimens
on vibration testing rigs (shaker systems).
Thanks to the numerous threaded holes on several sides,
a wide variety of devices and test specimens can be flexibly mounted.
The lightweight magnesium construction offers high rigidity
with a comparatively low weight and is ideal
for development, endurance, and environmental testing.
Technical data:
Manufacturer: BAT
Type: Shaker Fixture Cube / Clamping Cube
Material: Magnesium
Threaded holes: M8 grid on several sides
Dimensions (approx.): 300 × 300 × 300 mm
Weight: approx. 28–32 kg (estimated)
Features:
Solid magnesium design
M8 thread grid on several sides
Two stop eyes
Hnjdpfxezkgqns Akuew
Precision-machined clamping surfaces
High rigidity with low weight
Ideal for individual test setups
Accessories as shown in the pictures
Areas of application:
Vibration testing rigs
Shock testing
Environmental simulation
Automotive testing technology
Aerospace
Development and testing laboratories
Quality assurance
Industry
Scope of delivery:
Magnesium Shaker Fixture Cube
Accessories as shown in the pictures
Condition:
Used
Optical condition as shown in the pictures.
Normal signs of wear and tear, scratches and marks are present.
The table shown in the photos and other items not explicitly
mentioned are not part of the sale.
Shipping via parcel service is possible.
Subject to changes, errors and prior sale.
We will be happy to answer any further questions by telephone.
Success:
Your message has been sent.
Listing
Borken
785 km
Scienlab Battery Test System
KeysightSL1000A 1000V 900A 360kW
Call
Condition: excellent (used), Year of construction: 2019, KEYSIGHT TECHNOLOGIES
Scienlab Battery Test System
Keysight SL1000A
1000 V / 900 A / 360 kW – water-cooled
Used bidirectional battery test system for testing high-voltage batteries and energy storage devices with controlled charge/discharge cycles and electrical measurement data acquisition.
Technical data:
Manufacturer: Keysight Technologies / Scienlab
Model: SL1000A; 1 channel
Declaration of Conformity: 03/27/2019
Acceptance/Calibration documents: 04/16/2019
Electrical output data:
Hnedpfxj Ah Splo Akuow
Output voltage: 50–1000 V DC
Output current: ±900 A DC continuously
Output power: max. ±360 kW/channel
Current rise time: under 2 ms (typically 1.6 ms)
Mains connection:
400 V AC / 50 Hz; 3 (N), PE
Rated current: 2 × 290 A
Fuses: 2 × 315 A gG
Efficiency: over 90%; cos φ over 0.98
Power loss: under 36 kW
Measurement data acquisition:
Voltage: 4-wire; ±0.05% of measured value ±300 mV offset
Current: ±0.05% of measured value ±180 mA offset
Current ripple: ±0.2% up to 3.6 Aeff.
Temperature: 3 × PT100, 4-wire, -50 to +130 °C; ±1 K
Measurement and communication data:
8 analog inputs, 0–20 mA, 32 bit
Sampling rate: max. 20 kS/s
CAN: 500 kBaud; MCM: Ethernet
Optional: BMS-CAN, climate chamber Ethernet
Cooling water supply:
Water-cooled; heat to be dissipated: 36 kW
Supply: 6–20 °C; return: max. 30 °C
Flow rate at full load: approx. 2 m³/h
Supply pressure: max. 6 bar
Pressure difference: over 1.5 to 3.0 bar
Connections: 1 inch male thread; condensate: 3/4 inch male thread
Dimensions and operating conditions:
External dimensions (W × D × H): approx. 3820 × 880 × 2500 mm
Weight: approx. 2900 kg
Protection class: IP54; protection class I
Environment: +5 to +40 °C; 30–75 % rel. humidity
Operating altitude: max. 2000 m above sea level
Equipment:
Modular power modules, resonant converter, internal cooling water circuit, cooling unit, DC output, output and mains circuit breakers/chokes, EMC filter, measurement/control unit, insulation monitoring, overvoltage protection, main switch, emergency stop, key switch for test release, signal light.
Applications:
HV battery testing, battery development, energy storage testing, charge/discharge testing, test benches, research and automotive industry.
Documentation:
Manufacturer's operating manual, declaration of conformity, acceptance and calibration records from 2019; further documents as shown in the images. No statement regarding current calibration.
Condition:
Used; optical condition as shown in the images.
Scope of supply:
1 × Keysight SL1000A Scienlab Battery Test System; documentation and accessories as shown in the images.
Shipping or freight shipping possible.
Subject to changes, errors and prior sale.
We would be happy to answer any further questions by phone.
Success:
Your message has been sent.
Listing
Borken
785 km
CTS temperature test chamber T-30/950, -30°C to +80°C
CTSTemperaturprüfschrank
Call
Condition: used, CTS
Type: T-30/950 Ex/I
CTS Temperature Test Chamber, Explosion-Proof
Control: 32-bit controller
LCD control panel
Digital display of setpoint and actual values
Numerical input of setpoints
Hedpfxjzd Rzws Akujnw
Error messages in plain text
RS 232 interface
Free switching channels for on-site control of the test item
Temperature tests:
Temperature range: -30°C to +80°C
Temperature deviation: ±0.3 K over time
Temperature change rate:
Heating: 2 K/min
Cooling: 1.5 K/min up to -10°C
Heat radiation: approx. 1000 W at +20°C
approx. 200 W at -25°C
Nitrogen inerting with residual oxygen monitoring
With nitrogen inerting, the test chamber is initially purged with a large volume of N2 until the
oxygen content is less than 3%. After that, it switches to a base flow rate (approx. 10% of the large volume).
The nitrogen flow rate of the base flow is measured, displayed, and monitored using a flow meter and limit switch.
The O2 monitoring continuously extracts gas from the test chamber via a flame arrester and feeds it to an O2 sensor, which monitors the residual oxygen content of the extracted air.
The gas is then passed through a second flame arrester and returned to the test chamber. The extraction pump is monitored using a volume flow meter. Further details can be found in the operating manual from Dräger in the appendix.
The gas system is currently out of operation!
The technical data refer to an ambient temperature of +25°C,
rated voltage 400V, without test item, without irradiation, and without additional equipment.
Dimensions:
Test volume: 950 liters
Test chamber dimensions: height approx. 700 mm / width approx. 900 mm, depth approx. 1500 mm
External dimensions: height approx. 2400 mm / width approx. 1270 mm, depth approx. 3125 mm
Operating data:
Electrical connection: 400V+6/-10 %, 3/N, 50 Hz
Rated power: 21.6 kW
Rated current: 36.5 A
Protection class: IP 54
Condensate drain: unpressurized, R 1/2" internal thread
Sound pressure level: < 62 dB(A)
(according to DIN EN ISO 3744
measured at a distance of 1 m from the front)
Weight: approx. 1500 kg, control cabinet approx. 300 kg
External refrigeration unit
Refrigerant: R404A / R23
For your security as a buyer, the following information:
The following points are carried out on our offered chambers in advance:
1. Functional check and replacement of necessary components
2. If necessary, new filling with legally compliant refrigerant
3. Leak test with certificate
4. After successful inspection, the chambers are subjected to a documented test run.
Condition: used
Scope of supply: (See picture)
(Changes and errors in the technical data and specifications are subject to change!)
We are happy to answer any further questions by telephone.
Success:
Your message has been sent.
Listing
Borken
785 km
Universal shaker accessory kit, adapters, clamping devices, angle adapters, test fixtures, aluminum
Helmut FischerUniversal Shaker Zubehörsatz
Call
Condition: used, Universal
Shaker Accessories / Clamping Devices
Universal Shaker Accessory Kit
Precision clamping devices, angle adapters, adapter elements, and holding devices
for vibration test benches, vibration tests, and special designs
Hsdjzpya Hspfx Akujnw
For sale is a used accessory kit
for an electrodynamic shaker or vibration test bench.
The kit consists of numerous solid aluminum clamping devices,
angle adapters, adapter plates, clamping blocks, holding elements,
precision chucks, and other accessories for vibration tests.
Ideal for test specimen mounting, special designs, and customized test setups.
Technical data:
Manufacturer: unknown
Type: Accessory kit for electrodynamic shaker / vibration test bench
Material: predominantly aluminum
Design: Clamping devices, angle adapters, adapter elements, and fasteners
Components:
Several clamping devices
Angle adapters of various sizes
Precision adapter elements
Clamping blocks
Adapter plates
Aluminum rings
Holding and fastening elements
Other accessories as shown in the pictures
Features:
Solid aluminum construction
Precision-engineered components
Threaded holes and clearance holes
Universally applicable
Clamping devices
Angle adapters
Adapter elements
Clamping blocks
Accessories as shown in the pictures
Applications:
Electrodynamic shakers
Vibration test benches
Vibration testing
Material testing
Environmental simulation
Research and development
Automotive industry
Aerospace
Test specimen mounting and special designs
Scope of delivery:
Complete accessory kit as shown in the pictures
Clamping devices
Angle adapters
Adapter plates
Clamping blocks
Adapter elements
Aluminum rings
Other accessories as shown in the pictures
Weight: 600 kg
Condition:
Used
Optical condition as shown in the pictures.
Normal signs of wear and tear, scratches, and pressure marks are present.
Only the accessories shown in the photos are being sold.
The table shown in the photos, and any other items not explicitly
mentioned, are not included in the sale.
Shipping on a pallet or collection is possible.
Subject to changes, errors, and prior sale.
We will gladly answer any further questions by telephone.
Success:
Your message has been sent.
Listing
Oelde
860 km
1987 Martini FK-V-S
MartiniFK-V-S
Call
Condition: used, Year of construction: 1987, Multi-head thread-sewing machine for brochures and book blocks
Processing of single and double layers
Mechanical drive
Hnodo Ahhxxopfx Akuew
with gauze station (gauze feeder)
Available in January 2027
Success:
Your message has been sent.
Listing
Ahaus
779 km
Pillar Drilling Machine
OPTIMUMOPTI DRILL DH 55 G
Call
Condition: good (used), Year of construction: 2024, bore capacity in steel (diameter) 55.0 mm
throat 400 mm
bore stroke 200 mm
threading M 42 in ST
turning speeds 45.0 - 2000 U/min
table: 600 x 600 mm
bore spindles - Morse Taper 4 MK
column diameter 200 mm
feed 0.1 / 0.15 / 0.2 mm/U
distance spindle /table 130 - 725 mm
T-slots 3x 18 x 160 mm
table swivelabel .0 Grad
table load 350 kg
engine output 2.2 / 2.8 kW
weight 7 kg
Machine height 1060 x 850 x 2545 mm
Current list price: approx. 11.000 euros
Special price upon request
In good condition (!!)
Features:
- OPTIMUM OPTIdrill DH 55 G gear-driven drill press
- Heavy-duty model with automatic quill feed -INDUSTRIAL-
Hnjdpfx Aks Aiir Asusw
- Heavy-duty, solid cast-iron bench drill press
- Electrically operated quill feed
- Thread-cutting device
- Drilling depth stop
- Automatic gear lubrication via oil pump
- Large, solid drill table
* heavily ribbed on the back, /- can be tilted degrees to the side
- solid base plate with two parallel T-slots
- coolant system
- 24-volt DC electronics
- operating instructions
Success:
Your message has been sent.
Listing
Langenfeld (Rheinland)
838 km
Copy lathe knurling milling machine
WEMAJoker 7000 CD
Call
Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, wood lathe with milling unit, PLC-controlled.
A video of the machine in operation can be sent upon request.
PLC-controlled wood copy lathe for turning and milling.
The machine has two controlled axes: the longitudinal axis and the rotary axis.
Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling.
Several programs can be stored for turning and milling operations.
Hydraulic copy sensing of a pattern or template.
The roughing and copy tools are equipped with fine adjustments.
Template adjustment can be made from the front and rear via fine-threaded spindles.
Hnjdpfxozfwm Ns Akujw
The copy length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces.
Drive motor 400V / 3kW with electric motor brake.
Two speed stages adjustable via V-belt, within the stages, operation can be continuously adjusted via a frequency inverter.
Speed stage 1: 200 - 2000 RPM
Speed stage 2: 350 - 3400 RPM
Distance between centers approx. 1550mm
Copy length with steady rest approx. 1350mm
Bed length approx. 2100mm
Feed rate continuously adjustable, rapid traverse with safety end stop.
Hydraulic copy slide with V-turning tool.
Spindle with M33 thread and MK3 internal taper.
Tailstock MK3 and with quick-release device.
Numerous accessories:
Ring steady rest with front turning tool and insert aid.
Four-jaw steady rest.
Four-jaw chuck 125mm.
Copy tools, center punches, hexagonal drivers, etc.
Milling unit with 3kW motor for mounting on the copy slide.
5 milling heads available, only the 16mm collet is missing.
CE marking
Operating manual
V-belt new
Original paint, only a few spots retouched.
Very good condition from a small carpentry shop.
The machine apparently was not used to produce large quantities.
Dimensions approx. 2600 x 1300 x 1300mm (L x W x H). Weight approx. 800kg.
The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".
Success:
Your message has been sent.
Listing
Hilden
833 km
Center Lathe
WEILERPraktikant VC
Call
Condition: used, Year of construction: 2003, centre height 160 mm
dist. between centers 650 mm
spindle passage 40 mm
quill stroke 85 mm
thread pitch 0,25 - 8 mm
turning speeds 4.000 U/min
total power requirement 6,6 kW
weight of the machine ca. 920 kg
Hods Akpdtepfx Akusnw
dimensions of the machine ca. 1500 x 1000 x 1600 m
Success:
Your message has been sent.
Listing
Niederlangen
753 km
Bench Drilling Machine
IXIONBT13
Call
Condition: used, bore capacity in steel (diameter) 13 mm
throat 180 mm
bore stroke 70 mm
morse taper 3 MK
table: 215 x 215 mm
turning speeds 240 - 4000 U/min
engine output 0,7 kW
Hjdpfx Aewpltuekuenw
column diameter 65 mm
dimensions 650 x 250 x 800 mm
weight 50 kg
- Height adjustable and angle adjustable table
- Movable work table
- Prepared for cooling system
- Powerful engine
- 3 hand levers for drilling feed
- Safety shield with limit switch
- Separate emergency stop
- Built-in working lights
- Incl. drill chuck 16mm - B16
- Built-in automatic thread cutting.
Success:
Your message has been sent.
Listing
Borken
785 km
CTS T-50/3800/I battery test chamber, 3,750 L, −50 to +100 °C, inerting
CTSCTS T-50/3800/I
Call
Condition: used, CTS – Clima Temperatur Systeme GmbH
Temperature test chamber / Battery test chamber T-50/3800/I
-50 to +100 °C | 3,750 liters | water-cooled
Nitrogen inertization with O2/CO monitoring and safety door locking
Used CTS T-50/3800/I for temperature and environmental simulation tests. According to the previous owner, it was used for testing HV battery systems.
TECHNICAL DATA
Temperature range: -50 to +100 °C
Temporal/spatial temperature deviation: up to ±0.5 K each
Heating rate: approx. 4 K/min (-40 to +80 °C)
Cooling rate: approx. 3 K/min (+85 to -40 °C)
Change rates according to manufacturer's documentation, average without test specimen in the inlet air.
Test volume: 3,750 liters
Internal dimensions (H × W × D): approx. 1,000 × 2,500 × 1,540 mm (according to the previous owner)
Installation drawing: dimensions in top view 2,840 mm; overall height approx. 2,450 mm. Complete external dimensions to be confirmed.
Weight: chamber approx. 2,700 kg; separate control cabinet approx. 200 kg; together approx. 2,900 kg without test specimen/additional fittings.
REFRIGERATION SYSTEM AND ELECTRICALS
Refrigerant pre-cooling: R507, 6.5 kg
Refrigerant cooling: R23, nameplate 15 bar / 5 kg
Max. permissible overpressure: 25 bar each; test pressure: 27.5 bar each
Hodpfx Ao Aidd Njkusnw
Mains connection: 400 V / 3/N / 50 Hz
Rated power according to nameplate: 20.4 kW; rated current: 36.3 A
On-site protection: 50 A slow-blow; protection class: IP54
Max. heat input: 5,000 W at -40 °C
Cooling water supply/return: R 1 inch; approx. 2.5 m³/h at ΔT = 10 K and full load
Nitrogen: R 3/4 inch, operating pressure 3–6 bar
Condensate drain: R 1 inch internal thread
Sound pressure level: under 70 dB(A) according to manufacturer's documentation
EQUIPMENT
Digital temperature control with 32-bit controller, LCD setpoint/actual value display, numerical setpoint input, manual and program operation, water-cooled refrigeration unit, electronic monitoring/control system, stainless steel heating element with safety temperature limiter, stainless steel test chamber (1.4301), floor load 500 kg, radial fan, lockable double-wing door, separate control cabinet, RS232 and potential-free fault reporting contact.
SAFETY / BATTERY TESTING
Nitrogen inertization, O2 residual content monitoring, CO sensor, Dräger-Polytron sensors for O2/CO according to the previous owner, ATEX-tested flame arrestors according to manufacturer's documentation, electromagnetic door locking, mechanical emergency release, overpressure switch in the refrigeration circuit and current monitoring of the fan motors.
HV connections and cooling water connections for test specimens are available according to the previous owner. The previous owner describes the safety equipment as "Hazard Level 6"; this classification has not been independently confirmed.
AREAS OF APPLICATION
HV battery and temperature tests, environmental simulation, electronics, component and material testing, development, quality assurance, as well as aging and stress tests.
CONDITION / SCOPE OF SUPPLY
Used; optical condition according to the pictures.
1 × CTS T-50/3800/I, separate control cabinet and accessories as shown in the pictures.
Shipping or freight transport possible.
Subject to changes, errors and prior sale.
We will gladly answer any further questions by telephone.
Success:
Your message has been sent.
Listing
Borken
777 km
Aluminium measuring table with 50 mm aluminium plate, marking plate, measuring plate, aluminium plat
Musterfirma50 mm Aluminium plate
Call
Condition: used, Aluminum measuring table with a 50 mm aluminum plate and drawer cabinet.
- Type: Measuring table with aluminum measuring plate
- Dimensions:
- Width: 80 cm
- Depth: 75 cm
- Height: 95 cm (97.2 cm high with frame)
- Aluminum plate: 5 cm thick, with threaded holes
Manufacturer of drawer cabinet: Garant (Hoffmann Group)
- Number of drawers: 2
Hsdpfx Ajhvmkiskuenw
- Material: Aluminum
- Condition: used
Complete factory clearance sale,
large selection of storage mezzanines, pallet racks, shelving systems, and paternoster lifts. High-quality industrial machines, lathes, grinding machines, and power tools.
More items - new and used - can be found in our shop! International shipping costs available upon request!
Success:
Your message has been sent.
Listing
Borken
785 km
ETS Solutions Electrodynamic Vibration Test System Shaker MPA409/M437A
ETS SolutionsSchwingprüfanlage
Call
Condition: used, ETS Solutions
Type: ETS MPA409/M437A HP-3A
For sale is a used vibration and shock testing system from the manufacturer ETS Solutions.
Technical data:
Vibration testing system ETS MPA409/M437A
Sine force approx. 39.2 kN
Random force approx. 39.2 kN
Shock force 6ms: approx. 78.4 kN
Frequency range: DC-2,500 Hz
Max. displacement (continuous) 51 mm
Max. displacement (shock) 51 mm
Max. vibration velocity (sine) 1.8 m/s
Max. acceleration (sine / random) 100/40 g
Vibration exciter type M437A
Diameter of vibration coil 370 mm
Weight of vibration coil 34 kg
Number of threaded inserts 16 stainless steel inserts
Threaded inserts (standard) M10
Threaded inserts per bolt circle 8 at ∅ 150 mm
Diameter of bolt circle 8 at ∅ 300 mm
Resonant frequency of the armature without load 2,250 (Hz ±5%)
Max. static load capacity 500 kg
Axial frequency of vibration isolation < 5 Hz
Flux density < 1mT
Dimensions Length 1136 mm Width 860 mm Height 1118 mm
Weight of vibration exciter 2470 kg
Amplifier MPA409
- Output power approx. 40 kW
- Amplifier efficiency >90%
- Dimensions approx. (L x W x H in mm): 550x800x1850
- Weight approx. 620 kg
HP-3A cooling air blower
- Power consumption approx. 7.5 kW
- Dimensions approx. (L x W x H in mm): 945x693x1466
- Weight approx. 175 kg
Vibration controller DTC VENZO 880
- 8 analog input channels
- 1 to 2 control channels (suitable for two-axis control applications)
- 450 MHz DSP processing, 100 Mbit/s Ethernet interface for PC connection (no grounding problems)
- Operating temperature range: -30 to 70 °C
- Fanless design to reduce background noise
Hnodpfx Akozu Nxieuew
- Anti-aliasing filter with 160 dB/octave slope
- 1 AUX channel
- 24-bit ADC/DAC, 135 dB dynamic range
- 204.8 kHz sampling rate, 80 kHz frequency range
- 1 GB internal flash memory for storing test configurations
- Ground-isolated design to avoid ground loop problems
Enabled options: Sine, Random, Shock, RSTD (Resonance Search, Track & Dwell), transient capture
Scope of supply: (See picture)
Condition: Used
Signs of wear and tear due to age and use
Dirt, paint chips and traces of corrosion are present
Optical condition according to pictures
Shipping or freight forwarding possible.
Subject to changes, errors and prior sale.
We will gladly answer any further questions by telephone.
Success:
Your message has been sent.
Listing
Borken
785 km
Vötsch VT 7012 S2 temperature shock test chamber -74°C to +220°C, 125 liter climate chamber
VötschVT 7012 S2
Call
Condition: used, Vötsch
Temperature shock test chamber / Shock test chamber
Vötsch VT 7012 S2 temperature shock test chamber
Two-chamber system for rapid temperature changes from -74 °C to +220 °C
Water-cooled version with mobile cart and programmable control
For sale is a used temperature shock test chamber
from the manufacturer Vötsch Industrietechnik GmbH.
The system is suitable for temperature shock and temperature cycling tests,
environmental simulation, material testing, quality assurance,
electronics and component testing
as well as development, aging and stress tests.
The test chamber operates with a hot and a cold chamber.
The test specimen is moved between the two temperature zones via a mobile cart.
The system features an observation window,
test chamber lighting and programmable control.
Technical data:
Manufacturer: Vötsch Industrietechnik GmbH
Type: VT 7012 S2
Equipment type: Temperature shock test chamber / Shock test chamber
Version: Two-chamber system / water-cooled
Temperature range, hot chamber: +50 °C to +220 °C
Temperature range, cold chamber: -74 °C to +70 °C
Temperature deviation over time: ±1.0 K
Temperature deviation spatially: ±2.0 K
Heating rate, hot chamber: approx. 11.0 K/min
Cooling rate, cold chamber: approx. 3 K/min
Heating rate, cold chamber: approx. 2.0 K/min
Test chamber volume: approx. 125 liters
Test chamber dimensions: 470 × 410 × 650 mm (W × H × D)
Max. load capacity, mobile cart: 40 kg
Max. total load capacity, mobile cart: 20 kg
Pipe passage: Ø 67 mm
Refrigerant 1: R404A
Refrigerant quantity: 2.5 kg
Max. low pressure: 22.5 bar g
Max. high pressure: 25 bar g
Refrigerant 2: R23
Refrigerant quantity: 1.1 kg
Max. low pressure: 22.5 bar g
Max. high pressure: 25 bar g
Standby pressure: 13 bar g
Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz
Rated power: 10 kW
Rated current: 25 A
On-site fuse: 32 A slow-blow
Compressor power: 2 × 3 kW
Cooling water supply:
Inlet pressure: 3 to 6 bar
Differential pressure, inlet and outlet: ≥2.5 bar
Water connection: R 3/4" internal thread
Dimensions:
External dimensions: approx. 975 × 2,115 × 1,675 mm (W × D × H)
Weight: approx. 1,000 kg
Equipment:
Two-chamber temperature shock system
Hot chamber
Cold chamber
Motorized mobile cart
Programmable control
Manual operation
Automatic operation
Shock test operation
Observation window
Test chamber lighting
Pipe passage Ø 67 mm
Water-cooled refrigeration unit
Signal light
Operator terminal
Accessories according to images
Application areas:
Temperature shock testing
Temperature cycling testing
Environmental simulation
Material testing
Electronics testing
Component testing
Assembly testing
Quality assurance
Research and development
Service life testing
Aging and stress tests
Condition:
Used
Optical condition according to images
Scope of delivery:
1x Vötsch VT 7012 S2 temperature shock test chamber
Operator terminal
Original operating manual
Accessories according to images
Important note:
For the safety of our customers, the following work will be carried out on the offered test and climate systems in advance:
Hedpoz Ehuuofx Akuenw
1. Functional check and replacement of necessary components
2. Refilling with legally compliant refrigerant if necessary
3. Leak test with certificate
4. Documented test run after successful inspection
The table shown in the photos or any other items not expressly mentioned are not included in the sale.
Shipping or freight forwarding possible.
Subject to changes, errors and prior sale.
We wi
Success:
Your message has been sent.
Listing
Borken
785 km
Universal shaker accessory set, expander plate, adapter plates, fixture plates, vibration test stand
Helmut FischerUniversal Shaker Zubehörsatz
Call
Condition: used, Universal
Shaker accessories / adapter plates / expander plates
Universal accessory kit for electrodynamic shaker test systems
Professional accessory kit with expander plate, adapter plates, and clamping accessories for vibration test benches, vibration testing, and material testing.
For sale is a comprehensive used accessory kit for an electrodynamic shaker or vibration test bench.
The accessory kit is ideal for setting up test specimens, special fixtures, adapter constructions, and individual test setups. The kit consists of several solid aluminum adapter plates, a reinforced expander plate, adapter elements, and other accessories.
Technical data:
Manufacturer: unknown
Type: accessory kit for electrodynamic shakers / vibration test benches
Material: predominantly aluminum, partially steel
Hnodpfx Aszp D Tkokuew
Components:
1 reinforced expander plate, approx. 770 × 770 mm – approx. 90 kg
2 adapter plates, approx. 770 × 770 mm – approx. 45 kg and approx. 40 kg
1 adapter plate, approx. 770 × 770 mm – approx. 35 kg
1 adapter plate with circular cutouts – approx. 25 kg
1 round adapter plate – approx. 20 kg
1 clamping rail / linear adapter – approx. 25 kg
1 precision adapter block – approx. 3.06 kg
1 steel adapter plate – approx. 2.18 kg
Other adapter and fastening parts as shown in the pictures
Features:
Solid aluminum adapter plates
Reinforced expander plate with central mounting
Precision-engineered hole and thread patterns
High stiffness for dynamic loads
Adapter plates of various sizes and weights
Round adapter plate
Adapter plate with circular cutouts
Clamping rail / linear adapter
Precision adapter block
Other adapter and fastening parts as shown in the pictures
Application areas:
Electrodynamic shakers
Vibration test benches
Vibration testing
Material testing
Environmental simulation
Research and development
Automotive industry
Aerospace
Test specimen mounting and special constructions
Scope of delivery:
Complete accessory kit as shown in the pictures
1 expander plate
Several adapter plates
Round adapter plate
Adapter plate with circular cutouts
Clamping rail / linear adapter
Precision adapter block
Other adapter and fastening parts as shown in the pictures
Weight: 400 kg
Condition:
Used
Optical condition as shown in the pictures.
Normal age-related signs of wear, scratches, and pressure marks are present.
Some minor edge damage and signs of wear from test operation.
Only the accessories shown in the pictures are for sale.
The table or other items not explicitly mentioned in the pictures are not included in the sale.
Shipping on a pallet or collection is possible. Due to the high total weight, shipping is only possible via freight forwarder.
Subject to changes, errors, and prior sale.
We will be happy to answer any further questions by telephone.
Trust Seal
Dealers certified through Machineseeker

Success:
Your message has been sent.
Listing
Monheim am Rhein
835 km
Lathe - cycle-controlled
SEIGERSLZ-570E x 1000
Call
Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Technical details
turning diameter 570 mm
turning length 1000 mm
control MANUALplus 620
swing diameter over face slide 340 mm
spindle bore 93 mm
spindle turning speed range 1 - 3000 U/min
transmission ratio 2
rapid power traverse in X-and Z direction 7 / 10 m/min
max. workpiece weight -without tailstock 500 kg
max. workpiece weight between centres 1000 kg
workpiece weight in steadies max. 1250 kg
main drive motor (100/60% ED) 20 / 25 kW
Dimensions (LxWxH) 2,94 x 2,20 x 1,96 m
max. torque on the spindle ca. 1400 Nm
weight of the machine ca. 3,4 t
Additional information
Very well-maintained cycle-controlled lathe with driven tools.
Current operating hours: 10868
* HEIDENHAIN MANUALplus 620 control system
- Control system expansion for ICP and DIN programs, incl. thread repair
Hsdpfx Ako Akc Arouenw
* Automatic 8-station SAUTER turret with driven stations, VDI shank D=30 mm,
mounted in front of the turning center (limits achievable turning diameter
and tailstock operations; reduces turning length)
* 2-speed planetary gearbox, automatic shifting
* Main spindle holding brake, incl. software upgrade for bolt hole circle
and milling cycle options
- C-axis-style functionality for pocket milling, with drilling, milling,
and engraving cycles and free ICP input
* Reinforced coolant pump
* RÖHM 3-jaw chuck, 315 mm, with one set of hard jaws
* Steady rest
* Approx. 20 fixed tool holders
* 2 driven tool holders
Success:
Your message has been sent.
Listing
Borken
777 km
Alzmetall AC 32 Turret Double-Head Gang Drill Column Drilling Machine
AlzmetallAC 32 Turret
Call
Condition: used, Alzmetall AC 32 Turret Double-Head Drilling Machine
An extremely robust and rare double-head drilling machine based on two Alzmetall AC 32 drilling head units.
This machine is a high-quality industrial design intended for highly efficient series or multi-stage machining.
Instead of simple spindles, this machine is equipped with two separate tool turrets.
This enables fully automatic machining cycles (e.g., centering, drilling, countersinking, threading) without the need for manual tool changes.
Technical specifications & equipment (per head / total system):
Manufacturer of drilling head units: Alzmetall (Germany)
Model: AC 32 (Electronically controlled with digital display)
Drilling capacity: max. 32 mm in steel
Threading capacity: max. M 24 / M 30
Tool changer: 2x pivoting turrets with multiple stations
Machine table: Solid, ground cast iron table with T-slots for flexible setup
Safety: Complete enclosure of the work area (protective cabin) with viewing windows for optimal chip and splash protection
Hjdpsznic Ujfx Akuenw
Additional functions: Integrated coolant system, compressed air blow-off gun, central counterweight system for easy vertical adjustment of the entire beam
More items – new and used – can be found in our shop! International shipping costs available upon request!
Success:
Your message has been sent.
Listing
Borken
785 km
Julabo refrigerated circulator FP51-SL (v.2), filling volume 7.5 ... 12 liters
JulaboTiefkältethermostat FP51-SL
Call
Condition: used, Julabo
Type: FP51-SL (v.2)
Deep-freeze thermostat for low temperatures below -50 °C with bath opening for internal and external temperature control.
Hnodpfx Akszgaa Ieusw
Deep-freeze recirculating thermostats from the HighTech series, with HL or SL thermostats, are equipped with powerful pressure and suction pumps.
The devices offer the full range of functions of the professional HighTech thermostat series.
Technical data for FP51-SL
Dimensions and volume
Dimensions (W × D × H) 46 x 55 x 89 cm
Filling volume 7.5 ... 12 l
Weight 90 kg
Pump connection thread M16x1 external thread
Temperature values:
Working temperature range -51 ... +200°C
Temperature stability ±0.05°C
Setting the resolution of the temperature display 0.01°C
Temperature display resolution 0.01°C
Permissible ambient temperature +5 ... +40°C
Mains voltage 400V/3PNPE/50Hz (plug 16A CEE) (R507)
Power values:
Heating power 3 kW
Cooling capacity
20°C 2kW, 0°C 1.5 kW, -20°C 1 kW, -40°C 0.26 kW
Refrigerant R507
Global warming potential 3985
Filling weight 1030 g
Carbon dioxide equivalent 4.10455 t
Pump performance Flow rate 22 ... 26 l/min
Pump performance Delivery pressure 0.4 ... 0.7 bar
Maximum suction capacity 0.2 ... 0.4 bar
Viscosity max. 70 cSt
Power consumption 16 A
Electronics
Interfaces Profibus optional
Pt100 External sensor connection integrated
Integrated program generator 6x60 steps
Temperature control ICC
Absolute temperature calibration 3-point calibration
Temperature display VFD
Temperature setting Keypad
Voltage versions 400V/3PNPE/50Hz (plug 16A CEE) (R507)
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data are subject to change!)
We will gladly answer any further questions you may have by phone.
Success:
Your message has been sent.
Listing
Germany
1,006 km
Arburg ALLROUNDER 720 S 3200-1300
ArburgALLROUNDER 720 S 3200-1300
Call
Condition: ready for operation (used), Year of construction: 2016, operating hours: 37,890 h, clamping force: 3,200 kN, Hydraulic injection moulding machine manufactured in 2016. This ARBURG ALLROUNDER 720 S 3200-1300 has a clamping force of 3,200 kN and a 55 mm screw diameter. It includes a SELOGICA direct control unit and an ARBURG MULTILIFT SELECT robot with a 15 kg payload. Consider the opportunity to buy this ARBURG ALLROUNDER 720 S 3200-1300 hydraulic injection moulding machine. Contact us for further details.
Hode Akr Izopfx Akuonw
- Clamping Force: 3,200 kN (320 tonnes)- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor/Heating Rated Current: 125 / 70 A- Total Connected Load: 124 kW- Clamping Unit / Technology: Technology Stage 2 (servo-regulated) with two variable displacement pumps; programmable and regulated clamping force buildup held via servo-regulated second pump- Screw Diameter: 55 mm (wear- and corrosion-resistant plasticising cylinder unit with sintered metal non-return valve)- Screw Coupling: Reinforced spline geometry for high continuous dosing torques- Nozzle: Open nozzle 55 mm with internal thread M36x2, extended nozzle tip by 25 mm (R 35), equipped with heating band- Needle Shut-off Nozzle Controls: Electrical and hydraulic control for 4 hydraulic needle shut-off nozzles in mould (for Injection 1)- Platen / Centring: Central injection position, 160 mm centring diameter- Mould Height Adjustment: Automatic mould height adjustment via SELOGICA control- Core Pull Controls: 3 core pull units (1st core pull servo-regulated for simultaneous/serial movements with programmable pressure/flow; 2nd and 3rd core pull controls for serial movements with check valve holding pressure and programmable pressure/flow)- Hot Runner Zones: 9 additional heating control zones for mould heating (max. 2 kW / 230 V per circuit, HAN 24 E connector, Hasco pinout), with zones 1–3 having increased power up to 3.6 kW / 230 V (16 A each)- Cooling Circuits: Regulated machine cooling circuits; separate machine and mould cooling lines; 4 free cooling circuits on fixed platen; 4 free cooling circuits on movable platen (without shut-off valves); water-cooled electrical switch cabinet- Hydraulic System: ARBURG Energy Saving System (AES) with variable-speed water-cooled drive motor (applicable for 15–75 kW, 380–480 V, 50–60 Hz); continuous oil circulation with auxiliary pump for bypass filtration/cooling- Control Unit: SELOGICA direct interface with touchscreen display (15-inch / 38.1 cm) and sequence editor- Software & Option Packages: Productivity package, Extended Movements package, Production Control package, Extended Monitoring package, Optimization/Operating Aids package, Quality Assurance package, Documentation package (actual value log)- Electrical / Interfaces: CompactFlash interface; EUROMAP chip card authorization; Mobile SELOGICA AMS connection; EUROMAP 67 robot interface (50-pin); EUROMAP 73 safety fence door interlock interface; temperature control unit interface (20 mA, up to 6 units); colour dosing unit interface; USB printer serial interface; 4 freely programmable I/O channels; socket combination (1x CEE, 1x Schuko 230 V plus additional switchable combination)- Blow-off Units: Electrical preparation for retrofitting air blow-off units 1 & 2- Machine Mounts: Vibration-damping elastomeric machine mounts (Schwingmetall)- Optional Automation / Robot: ARBURG MULTILIFT SELECT 15KG transverse robot - Robot Weight: 450 kg - Max. Handling Payload: 15 kg - Control Unit: SELOGICA - Pneumatic Operating Pressure: 0.
We make it easier for you to find: "thread coiler"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Thread Coiler (2,596)
Search Machineseeker now with more than 200,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you






















































































































































































































































































