Used Thread Wuerling for sale (2,390)

Condition: used, CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, hermetically sealed, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, left-hand door stop, one-hand operation, lockable. Insert shelf: stainless steel, support area 970 x 980 + 500 mm load per shelf max. 35 kg total load with max. shelf load 100 kg Test chamber lighting: 3x halogen lamp 20 W, 12 V Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Plain text error messages RS 232 interface free switching channels for on-site control of the test item Temperature range: -40°C to +180°C Rated voltage: 400V 3/N 50Hz Rated power: 10.4 kW Rated current: 17.2 A Compressor: TFH2516Z Pipe connection NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test item, without radiation and without additional devices. Dimensions: Test volume: 2000 liters Gjdezg Twaepfx Akhskd Test chamber dimensions: height 900, width 975, depth 2200 mm External dimensions: height 1950, width 1290, depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain, non-pressurized, R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1m from the front) < 55 dB(A) Weight: approx. 1200 kg For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, BAT Shaker Fixture Cube / Clamping Cube Magnesium Shaker Fixture Cube Professional clamping cube for vibration testing rigs / shakers with an M8 thread grid for flexible test specimen mounting For sale is a used clamping cube for vibration and shock testing rigs. The adapter cube is used to securely hold test specimens on vibration testing rigs (shaker systems). Thanks to the numerous threaded holes on several sides, a wide variety of devices and test specimens can be flexibly mounted. The lightweight magnesium construction offers high rigidity with a comparatively low weight and is ideal for development, endurance, and environmental testing. Technical data: Manufacturer: BAT Type: Shaker Fixture Cube / Clamping Cube Material: Magnesium Threaded holes: M8 grid on several sides Dimensions (approx.): 300 × 300 × 300 mm Weight: approx. 28–32 kg (estimated) Features: Solid magnesium design M8 thread grid on several sides Two stop eyes Precision-machined clamping surfaces High rigidity with low weight Ideal for individual test setups Accessories as shown in the pictures Areas of application: Vibration testing rigs Shock testing Environmental simulation Automotive testing technology Aerospace Development and testing laboratories Quality assurance Industry Scope of delivery: Gkedpfxszkgqns Akhsd Magnesium Shaker Fixture Cube Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear, scratches and marks are present. The table shown in the photos and other items not explicitly mentioned are not part of the sale. Shipping via parcel service is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, CTS Temperature Shock Chamber / Temperature Test Chamber CTS TSS-70/130 Temperature Shock Chamber Water-cooled temperature shock chamber, approx. 130 liters For sale is a used temperature shock chamber from the manufacturer CTS Clima Temperatur Systeme GmbH. The test chamber is suitable for temperature shock tests, cyclic temperature tests, material testing, quality assurance as well as development and stress tests. Technical data Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Device type: Temperature shock chamber / Temperature test chamber Test volume: approx. 130 liters External dimensions: approx. 2335 x 940 x 1820 mm (W x D x H) Internal dimensions: approx. 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions: approx. 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight: approx. 950 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Changeover time: < 10 seconds Ramp-up rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min from room temperature to +180 °C Cooling rate: approx. 4 K/min from room temperature to -60 °C Temperature deviation (time): ±1 K Temperature deviation (spatial): ±2 K Power connection: 400 V 3/N / 50 Hz Power: 16.6 kW Rated current: 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant, precooling stage: R404A Refrigerant quantity, precooling stage: 4.0 kg Refrigerant, cooling stage: R23 Refrigerant quantity, cooling stage: 0.6 kg / 10 bar Operating pressure PS: 25 bar Water-cooled version Cooling water connection required Compressed air connection required Operation only possible with cooling water and compressed air Cooling water inlet: 3–6 bar Equipment CTS control panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Mobile frame with screw drive Test chamber / mobile frame made of stainless steel Insert tray made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Documentation / operating manual Accessories according to images Gkedpfx Ajzf Ibkekhsd Application areas Temperature shock testing Cyclic temperature testing Material testing Electronics testing Component testing Aging tests Quality assurance Research and development Condition Used Optical condition according to images Scope of delivery 1x CTS TSS-70/130 temperature shock chamber Insert tray / test chamber equipment Available documentation / documents Operating manual Accessories according to images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Objects, machines or other accessories shown in the images that are not explicitly described are not included in the scope of delivery. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: good (used), Year of construction: 1999, Maximum distance between centers 250 mm Distance between centers 1500 mm Spindle bore 63 mm Spindle mount, DIN 55027 Size 6 Spindle speeds (2-speed, stepless) 1 - 650 / 1 - 2,500 rpm Feeds (X/Z) 5000 mm/min Rapid traverse (X/Z) 7 / 6 m/min Taper in quill MK 5 Quill stroke 160 mm Gkedpfjz Icrgjx Akhsd Quill diameter 70 mm Drive power 16 kW Machine dimensions L x W x H 3200 (length without chip conveyor) x 1800 x 1400 mm Machine weight 3200 kg Accessories / Special features: • Cycle control: HEIDENHAIN Manual Plus o Color screen o The machine can be operated manually using electronic handwheels and a position display, or with o CNC 2-axis cycle control MANUAL PLUS o 2D simulation, fast and reliable control o RS 232 interface o Graphically supported, dialogue-based programming o A color screen displays the current axis positions with residual value display, as well as the input of cutting data, cutting speeds (also constant), target points (absolute & relative) with graphical cycle check and simulations. Pre-programmed work cycles for complex shapes with curves or chamfers, thread or grinding cycles according to DIN; threads (metric, multi-start, tapered threads), boring and grooving. • 3-jaw chuck, diameter 250 mm • Chip conveyor • Hardened and precision-ground bed guides, main spindle, gears and shafts • Chuck guard, electrically protected • Quick-change tool holder system „MULTIFIX“ Size C • Protective guard with safety device, laterally sliding • Manual tailstock • Coolant system • Central lubrication • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2000, Suitable specifically for turning out drillings on HM-equipped saw blades, CV saw blades and bases from a diameter of 80 to 800 mm Ø. Turning time with on and off clamping: 4 minutes Gsdpfxez Sy Ems Akhekd drive power: 2.2 kW with stepless speed regulation via frequency converter Threading device: Equipped with a cross slide with adjustable dovetail guidance + locking levers Travel stroke X-axis: about digital display max 200 mm Y axis: about hand spindle 120 mm Magnetic holding force: 10 kg/cm² magnet: Suitable specifically for turning out drillings on HM-equipped saw blades, CV saw blades and bases from a diameter of 80 to 800 mm Ø. Dimensions W x D x H =: 1700 x 900 x 1750 mm mass: 650 kg

Condition: good (used), Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes -Screw stand: Fixator for machine tools and systems, 1 piece Gksdpfx Akj Afhz Ushed -Minimum height: 215 mm -Max. height: 295 mm -Dimensions: Ø 100 x 215 mm -Weight: 12 kg

Condition: good (used), max. threading capacity up to M 6 with guide cartridge throat 130 mm drive power 0,55 kW dimensions L x W x H approx. 350 x 650 x 750 mm weight approx. 90 kg Accessories / special features: - Threaded guide cartridges: 1 x pitch 0.5 mm 1 x pitch 0.6 mm 1 x pitch 0.7 mm 2 x pitch 0.8 mm 1 x pitch 1.0 mm - Various adjustable working cycles such as: Automatic, foot operation Siegfried Volz Machine Tools Gkedpfx Aonyh Tnekhsd Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2006, A full set of 5 Cogsdill Boring, facing, and contouring heads. Comprising - ZX300 Facing & Contouring Head Bi-directional Stub Tool Seat Pocket Tool Single Slide Tool Gedjz Erx Djpfx Akhekd Valve Seat Pocket Tool Extension and support bars included, with bespoke stand as shown. Operations include: Boring, Facing, Contouring, Threading Taper Boring, Deep Cavity Boring Grooving. Profiling, Back-spotfacing Chamfering, Bottle Boring. Radii

Condition: good (used), Ram, rams for an eccentric press, single column press, punching machine, single column eccentric press, eccentric press - single column, press -Spare part: comes from a Weingarten eccentric press Gedpfxsd Nzg Rs Akhskd -Stroke adjustment: 10-80mm -Plunger area: 320 x 65 mm -Plunger mount: O 40 mm -Plunger adjustment thread: M64 x 6 mm -Plunger adjustment ball head: approx. 92 mm -Dimensions: 875/320/H190 mm -Weight: 164 kg -Pressure unknown

Condition: used, Year of construction: 1987, Multi-head thread-sewing machine for brochures and book blocks Processing of single and double layers Mechanical drive with gauze station (gauze feeder) Gkodpfxo Ahhxxs Akhjd Available in January 2027

Year of construction: 1985, condition: repair required (used), Extraction machine for taps Gksdpfxji Huvhe Akhsd -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier -Manufacturer: Electro ARC, extraction machine for taps or similar tools -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of steel cast gray iron Table unit with clamping plate and very robust guide rail Table clamping surface: 5500 x 2000 mm Gkodpfethuzpsx Akhed Travel of the table clamping plate: approx. 3100 mm Table height / overall height: 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single start) - Machining table guided very stably on the bed - Metal telescopic guide rail cover - from a DROOP & REIN portal milling machine - Table longitudinal movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots, 28 mm - Drive via SIEMENS servo motor 1FT6134-6AB71-1AG2 with encoder IC200448S/R (RN 000 B25) Overall length: 9500 mm Width: 2000 mm Overall height: 1050 mm Weight: 27 tons Good condition

Condition: used, Year of construction: 1995, bore capacity in steel (diameter) 35 mm throat 300 mm bore stroke 180 mm turning speeds 45-1750 U/min 615 x 420 mm total power requirement 2,2 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1,2 x 0,8 x 2,15 m Equipment: - Robust pillar drilling machine - Infinitely variable speed adjustment (V-belt) - Thread-cutting device - Automatic spindle feed * With electromagnetic engagement - Multi-speed (pole-changing) motor Gjdpe Ahziaefx Akhjkd - Clockwise/counter-clockwise spindle rotation - Drilling depth stop - Machine table with 2 T-slots * Height-adjustable via hand crank - Coolant system - Machine vise - Emergency stop

Condition: new, Year of construction: 2024, Equipment: documentation/manual, MAIN SPINDLE Maximum turning diameter: 38 mm Max. spindle bore diameter: 40 mm Maximum speed [rpm]: 6,500 Maximum power [kW]: 23 (76 Nm) C-axis with 0.001° Stroke Z1 [mm]: Long-bed lathe version 320 mm, Short-bed lathe version 120 mm Synchronously rotating guide bushing unit Type of guide bushing: BRA 42 (FBritsch) Type of chuck: 173E TAILSTOCK Maximum speed [rpm]: 6,500 Maximum power [kW]: 23 (76 Nm) Maximum workpiece diameter [mm]: 38 Max. workpiece length, push-out forward [mm]: 90 C-axis with 0.001° Stroke Z2 [mm]: 350 Type of chuck: 171E / 173 E TOOLING OPTIONS Tool slide X1, Y1: - Tool holder plate for 5 external turning tools 2x20x20mm, 3x 16x16 Cross drilling / milling unit: - Number: 5 driven drilling/milling spindles 3 x ER16 + 2 x ER20 - Power: [kW]: 2.13 (S6000) - Front drilling unit for 5 drilling spindles, diameter 32 mm --> not applicable with option B-axis 6 AGW!!! Cross slide tailstock - optional deep hole drilling adapter - 2 driven drilling/milling spindles ER16 modular Rear-end machining Y2 axis - 4 driven drilling/milling spindles ER16 modular (S6000) kW=1.02 - 4 fixed drilling/milling spindles ER16 modular - Option 8 driven drilling/milling spindles ER16 modular AXES AND CONNECTED LOAD Number of servo axes: 6 Number of spindle axes: 2 Rapid traverse rate m/min: 32 m/min (Z1, Z2, Y, X2, Y2); 24 m/min (X1) Connected load [kW]: 40kVA CONTROL Control type: Siemens 828 D SL Number of axes: 6 (X1, Z1, Y1, X2, Z2, Y2) Simultaneous 4-axis control External control panel with handwheel 10.4" color monitor LCD/MDI Gksdpfs Ah Dtdex Akhed Automatic PowerOff function Program check function (test run via handwheel possible) Continuous threading cycle Runtime display / part counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function ACCESSORIES Leveling feet with leveling elements Toolbox and service tool set LED work area light Signal lamp (3-color) Safety door switch with interlock Maintenance and central lubrication unit (1.8 liter lubricant volume) Coolant flow monitoring Pneumatic blowing device for tailstock chuck Manual and documentation in German and English (Maintenance and operating instructions incl. parameter list and test report) Convertible to short-bed lathe incl. deep drilling unit max. drilling length 300 mm. The deep drilling unit has a separate motor max. 6,000 rpm.

Condition: ready for operation (used), Year of construction: 2017, overall weight: 3,600 kg, bar diameter (max.): 32 mm, controller manufacturer: FANUC, controller model: Series 32i-MODEL B, number of axes: 9, This 9-axis TSUGAMI HS327 swiss type turning machine was manufactured in 2017. It features a maximum machining diameter of 32 mm and includes a main spindle with 8 positions for turning tools. The machine has been completely overhauled in 2022, ensuring optimal performance. If you are looking to get high-quality turning capabilities, consider the TSUGAMI HS327 machine we have for sale. Contact us for further details. Godpfe Ahzbzsx Akhskd - Number of Axes: 9 axes (X1, X2, Y1, Y2, Z1, Z2, B 135°, C1, C2)- Max. Machining Diameter: 32 mm- Overhaul Status: Completely overhauled in 2022- Main Side:- Main Spindle: 1, Z1 / C1 axis- Turning Tools: 8 positions- Front Tool Holder: 4 driven cross tools (3 x AR16 and 1 x AR20)- B-Axis Tool Holder: 8 driven tools AR16 (front and back), 4 stationary boring tool positions (Ø 25 mm)- B-Axis Swivel Angle: 0° to 135°- Max. Speed Driven Tools (B-axis): 5,000 rpm- Sub-Spindle / Back Working Side:- Sub-Spindle: 1, X2 / Z2 / C2 axis- Rear Tool Holder: 4 stationary tools and 4 driven tools (Max. 8,000 rpm, AR16 collet, max. drill Ø 8 mm, max. thread M6)- Associated Bar Feeder:Optional Equipment:  - Chip Conveyor: Inclined scraper/hinged belt chip conveyor (pallet-mounted)  - High-Pressure Coolant / Filter Unit: External high-pressure pump unit with control panel mounted on pallet- Bar feeder: Manufacturer: FMB MASCHINENBAU- Type: Turbo 3-36 / 3200 A- Year of Manufacture: 2017- Bar Capacity: 3–38 mm (nominal 3–36 mm)- Bar Length: 3,200 mm Technical Specification Counter Spindle Yes

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 420 mm, spindle bore: 103 mm, turning diameter: 660 mm, turning diameter over bed slide: 660 mm, center height: 330 mm, turning length: 3,000 mm, total length: 5,000 mm, total width: 2,000 mm, total height: 2,000 mm, spindle speed (max.): 1,320 rpm, overall weight: 5,000 kg, power: 15 kW (20.39 HP), Technical Specification: Lathe ZMM Bulgaria – C10 TS Comprehensive overview of the most important performance data and characteristics The universal lathe C10 TS from the Bulgarian manufacturer ZMM Bulgaria is designed for demanding turning operations with stepless spindle speed control. The following provides an extended and detailed overview of the machine's key technical parameters. 1. Main Specifications and Performance Values No. | Technical Parameter | Value / Version ---|---|--- 1 | Spindle bore | 103 mm 2 | Spindle nose (DIN 55027) | Size No. 11 (Taper Metric 120) 3 | Center height / Swing over bed | 330 mm / 660 mm 4 | Swing over cross slide / in the gap | 420 mm / 850 mm 5 | Bed width | 560 mm 6 | Distance between centers | 1500; 2000; 3000; 4000; 5000; 6000 mm 7 | Main motor power | 15 kW 8 | Spindle speed range (Stepless in 3 ranges) | • Range 1: 9 – 55 rpm • Range 2: 37 – 220 rpm • Range 3: 220 – 1320 rpm 9 | Feed and threading capacity | • Number of feeds: 150 (Longitudinal: 0.039–18 mm/rev, Cross: 0.02–9 mm/rev) • Number of threads: 76 (Metric, Inch, Module, DP) 10 | Tailstock & Chuck | • Quill diameter: 105 mm (Mount MK 6, Stroke 225 mm) • Weight (for center distance 2000 mm): approx. 4,170 kg 2. Special Features & Optional Accessories Gkodj Aid Twopfx Akhsd • Stepless speed control: Enables optimal adjustment of the cutting speed to the workpiece material and tool diameter in 3 mechanical sub-ranges. • Special accessories (options): 3-jaw chuck (Ø 315 mm), 4-jaw faceplate chuck (Ø 600 mm), Fixed and traveling steady rests (large/small), Taper turning attachment (+10°), Follower rest (MK 5), and threading dial.

Condition: used, Year of construction: 2008, Column drilling machine, Alzmetall Type/Model: AX 3/S Condition: Used Year of manufacture: 2008 Technical data: Drilling capacity steel E335: 40 mm Gjdpfjzym U Sex Akhskd Thread cutting steel E335: M 24 Short spindle: MK 3 Overhang: 292 mm Surface area of machine table: 510 x 360 mm Distance spindle-table min./max.: 117 / 701 mm Column diameter: 115 mm Spindle stroke: 120 mm Feed: manual Speed range, continuously variable: 160 - 2,250 1/min Motor power: 1.5 / 1.9 kW Connection: 400 V Machine dimensions L x W x H approx.: 650 x 950 x 1870 mm Weight approx.: 340 kg Equipment/Features: - Operator foot with T-slots - Continuously variable speed adjustment - Machine lamp - Coolant foot with pump - Thread cutting device with foot pedal - Emergency stop button - Drilling depth stop - Digital speed display - Drill chuck Albrecht 1 - 13 - CE - Operating manual, electrical documentation Inquiry item: Transport costs in a separate offer.

Condition: good (used), Year of construction: 2000, Ref. -No.: 10588 Manufacturer: HEDELIUS Gkjdps Ain N Rofx Akhjd Type: CB 70 - 3200 Year of construction: 2000 Type of control: CNC-Steuerung Control: Heidenhain TNC Storage location: Halberstadt Country of origin: Germany Machine-No.: 0032XXXX Space requirement: 7200 x 3400 x 3100 Length x width x height (mm) X-Travel: 3200 mm Y-Travel: 720 mm Z-Travel: 600 mm Table Height: 900 mm Number of T-slots: 5 Max. Workpiece Weight: 3000 kg Max. Tool Length: 330 mm Clamping Area: 3900 x 650 mm T - groove width: 18 mm T - slot spacing: 125 mm Tool Taper: DIN 69871 AD 40 Spindle Speed: 30 - 8000 RPM Max. Torque: 102 x 240 Nm Feed Speeds X/Y/Z Axis: 30000 mm / min Rapid Travel X/Y/Z: 30 / 30 / 30 mm / min Total Power Requirement: 50 kW Borehole Diameter: 28 x 44 mm Max. Feed force: 9000 / 9000 / 9000 kN Distance between spindle nose and table: 140 - 740 mm Number of tools: 30 Pcs Tool clamping: Tellerfeder Max. milling capacity: 400 x 600 Max. thread diameter: M20 x M30 mm coolant: 250 bar Further information: - L = 7.50 m Special accessory: automatic door - H = 3.60 m Special accessory: full cladding of working area - Ø 125 mm only with free side spaces 35 mm The machine can be viewed under power by arrangement.

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, wood lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Several programs can be stored for turning and milling operations. Hydraulic copy sensing of a pattern or template. The roughing and copy tools are equipped with fine adjustments. Template adjustment can be made from the front and rear via fine-threaded spindles. The copy length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Gedpfx Aozfwm Njkhjkd Two speed stages adjustable via V-belt, within the stages, operation can be continuously adjusted via a frequency inverter. Speed stage 1: 200 - 2000 RPM Speed stage 2: 350 - 3400 RPM Distance between centers approx. 1550mm Copy length with steady rest approx. 1350mm Bed length approx. 2100mm Feed rate continuously adjustable, rapid traverse with safety end stop. Hydraulic copy slide with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release device. Numerous accessories: Ring steady rest with front turning tool and insert aid. Four-jaw steady rest. Four-jaw chuck 125mm. Copy tools, center punches, hexagonal drivers, etc. Milling unit with 3kW motor for mounting on the copy slide. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots retouched. Very good condition from a small carpentry shop. The machine apparently was not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300mm (L x W x H). Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".

Condition: used, Universal Shaker accessories / adapter plates / expander plates Universal accessory kit for electrodynamic shaker test systems Professional accessory kit with expander plate, adapter plates, and clamping accessories for vibration test benches, vibration testing, and material testing. For sale is a comprehensive used accessory kit for an electrodynamic shaker or vibration test bench. The accessory kit is ideal for setting up test specimens, special fixtures, adapter constructions, and individual test setups. The kit consists of several solid aluminum adapter plates, a reinforced expander plate, adapter elements, and other accessories. Technical data: Manufacturer: unknown Type: accessory kit for electrodynamic shakers / vibration test benches Material: predominantly aluminum, partially steel Components: 1 reinforced expander plate, approx. 770 × 770 mm – approx. 90 kg 2 adapter plates, approx. 770 × 770 mm – approx. 45 kg and approx. 40 kg 1 adapter plate, approx. 770 × 770 mm – approx. 35 kg 1 adapter plate with circular cutouts – approx. 25 kg 1 round adapter plate – approx. 20 kg 1 clamping rail / linear adapter – approx. 25 kg 1 precision adapter block – approx. 3.06 kg 1 steel adapter plate – approx. 2.18 kg Other adapter and fastening parts as shown in the pictures Features: Solid aluminum adapter plates Reinforced expander plate with central mounting Precision-engineered hole and thread patterns High stiffness for dynamic loads Adapter plates of various sizes and weights Round adapter plate Adapter plate with circular cutouts Clamping rail / linear adapter Precision adapter block Other adapter and fastening parts as shown in the pictures Application areas: Electrodynamic shakers Vibration test benches Vibration testing Material testing Environmental simulation Research and development Automotive industry Aerospace Test specimen mounting and special constructions Scope of delivery: Complete accessory kit as shown in the pictures 1 expander plate Several adapter plates Round adapter plate Adapter plate with circular cutouts Clamping rail / linear adapter Precision adapter block Other adapter and fastening parts as shown in the pictures Weight: 400 kg Condition: Used Godpfezp D Tksx Akhekd Optical condition as shown in the pictures. Normal age-related signs of wear, scratches, and pressure marks are present. Some minor edge damage and signs of wear from test operation. Only the accessories shown in the pictures are for sale. The table or other items not explicitly mentioned in the pictures are not included in the sale. Shipping on a pallet or collection is possible. Due to the high total weight, shipping is only possible via freight forwarder. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, ETS Solutions Type: ETS MPA409/M437A HP-3A For sale is a used vibration and shock testing system from the manufacturer ETS Solutions. Technical data: Vibration testing system ETS MPA409/M437A Sine force approx. 39.2 kN Random force approx. 39.2 kN Shock force 6ms: approx. 78.4 kN Frequency range: DC-2,500 Hz Max. displacement (continuous) 51 mm Max. displacement (shock) 51 mm Max. vibration velocity (sine) 1.8 m/s Max. acceleration (sine / random) 100/40 g Vibration exciter type M437A Diameter of vibration coil 370 mm Gkedpfxozu Nxie Akhsd Weight of vibration coil 34 kg Number of threaded inserts 16 stainless steel inserts Threaded inserts (standard) M10 Threaded inserts per bolt circle 8 at ∅ 150 mm Diameter of bolt circle 8 at ∅ 300 mm Resonant frequency of the armature without load 2,250 (Hz ±5%) Max. static load capacity 500 kg Axial frequency of vibration isolation < 5 Hz Flux density < 1mT Dimensions Length 1136 mm Width 860 mm Height 1118 mm Weight of vibration exciter 2470 kg Amplifier MPA409 - Output power approx. 40 kW - Amplifier efficiency >90% - Dimensions approx. (L x W x H in mm): 550x800x1850 - Weight approx. 620 kg HP-3A cooling air blower - Power consumption approx. 7.5 kW - Dimensions approx. (L x W x H in mm): 945x693x1466 - Weight approx. 175 kg Vibration controller DTC VENZO 880 - 8 analog input channels - 1 to 2 control channels (suitable for two-axis control applications) - 450 MHz DSP processing, 100 Mbit/s Ethernet interface for PC connection (no grounding problems) - Operating temperature range: -30 to 70 °C - Fanless design to reduce background noise - Anti-aliasing filter with 160 dB/octave slope - 1 AUX channel - 24-bit ADC/DAC, 135 dB dynamic range - 204.8 kHz sampling rate, 80 kHz frequency range - 1 GB internal flash memory for storing test configurations - Ground-isolated design to avoid ground loop problems Enabled options: Sine, Random, Shock, RSTD (Resonance Search, Track & Dwell), transient capture Scope of supply: (See picture) Condition: Used Signs of wear and tear due to age and use Dirt, paint chips and traces of corrosion are present Optical condition according to pictures Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Aluminum measuring table with a 50 mm aluminum plate and drawer cabinet. - Type: Measuring table with aluminum measuring plate - Dimensions: - Width: 80 cm - Depth: 75 cm - Height: 95 cm (97.2 cm high with frame) - Aluminum plate: 5 cm thick, with threaded holes Manufacturer of drawer cabinet: Garant (Hoffmann Group) Gsdpfohvmkijx Akhekd - Number of drawers: 2 - Material: Aluminum - Condition: used Complete factory clearance sale, large selection of storage mezzanines, pallet racks, shelving systems, and paternoster lifts. High-quality industrial machines, lathes, grinding machines, and power tools. More items - new and used - can be found in our shop! International shipping costs available upon request!

Condition: ready for operation (used), functionality: fully functional, L & Z Lathe WEILER COMMODOR B / GS - Model -GS model / Machine from a vocational school -Very well-maintained overall condition Gkjdpfx Ao Ai Sy Iskhod -3-axis digital display / Heidenhain ND 780 -Center height 180 mm -Turning diameter over bed 330 mm -Distance between centers 1000 mm -Bar capacity 56 mm -Spindle speeds 25 - 2000 rpm -Automatic longitudinal and cross feeds -Thread cutting / Metric / Inch / etc. -Multifix base and inserts -Electric chuck guard -Lead and feed screw cover -3-jaw chuck - Röhm -Chip guard -2x EMERGENCY STOP -Machine feet -Documentation Dimensions: L x W x H 2.5 x 1.3 x 1.7 meters / Weight 1500 kg Errors and omissions excepted

Condition: used, Alzmetall AC 32 Turret Double-Head Drilling Machine An extremely robust and rare double-head drilling machine based on two Alzmetall AC 32 drilling head units. This machine is a high-quality industrial design intended for highly efficient series or multi-stage machining. Instead of simple spindles, this machine is equipped with two separate tool turrets. This enables fully automatic machining cycles (e.g., centering, drilling, countersinking, threading) without the need for manual tool changes. Technical specifications & equipment (per head / total system): Manufacturer of drilling head units: Alzmetall (Germany) Model: AC 32 (Electronically controlled with digital display) Drilling capacity: max. 32 mm in steel Threading capacity: max. M 24 / M 30 Tool changer: 2x pivoting turrets with multiple stations Machine table: Solid, ground cast iron table with T-slots for flexible setup Safety: Complete enclosure of the work area (protective cabin) with viewing windows for optimal chip and splash protection Gkjdpfxeznic Uo Akhjd Additional functions: Integrated coolant system, compressed air blow-off gun, central counterweight system for easy vertical adjustment of the entire beam More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Thread rolling machine UPWS 25. Gkjdpfxozd Rf No Akhed