Used Traub Tna480 Tx8D for sale (97)

Condition: like new (used), Year of construction: 2022, operating hours: 13,116 h, Max. bar capacity mm: 20 Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working device: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder diameter mm: 25 Sub spindle: Max. spindle bore mm: 20 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant system basic unit: Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration degree µm: 200 Machine dimensions Length x width x height mm: see installation plan* Weight kg: 5,000* Connected load kW: 40 (47 kVA) Gusdswuddvepfx Afxei

Condition: good (used), Year of construction: 2005, operating hours: 60,764 h, functionality: fully functional, machine/vehicle number: 6030637, The machine is in good, ready-to-use condition and can currently be inspected under power. Disassembly and removal of the machine are the buyer’s responsibility. The machine features 2 turrets, each with 12 tool stations, all of which are driven. There is also a front station with 5 tool positions, 4 of them driven, as well as a rear station with 5 tool positions, 4 of them driven. The main spindle clamping system is a Hainbuch 32; the sub-spindle features an Axfix clamping system from Hainbuch. Various basic tool holders are included. Godjw N Rzijpfx Afxsui

Condition: good (used), Year of construction: 1990, Manufacturer: Traub, model TNS 60, control unit: TX8-D, operating hours: 2,321, serial no.: 1407, year of manufacture: 1990 FROM TRAINING WORKSHOP Gsdpfsw Hdwgsx Afxjui

Condition: ready for operation (used), Year of construction: 2000, operating hours: 22,232 h, functionality: fully functional, machine/vehicle number: 317, turning length: 1,000 mm, turning diameter: 680 mm, spindle motor power: 60,000 W, spindle speed (max.): 2,800 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Turning length: 1,000 mm Turning diameter: 680 mm Spindle motor power: 60,000 W Max. spindle speed: 2,800 rpm MACHINE DETAILS Control model: TX 8H Electrical Data Operating voltage: 400 V 3~ Control voltage: 24 V ~ Solenoid voltage: 24 V – Clutch voltage: 24 V – Total power: 60 kW Total current: 100 A Spindle operating hours: 22,232 hours EQUIPMENT Documentation/Manual Continuously adjustable speed Chip conveyor RUEZ SFWW2 Gedpfx Ajw Rp Svofxjui Oil separator Tool holder VDI40 Comprehensive documentation Note: Dismantling and loading can be supported with personnel and crane facility.

Condition: excellent (used), Year of construction: 2001, operating hours: 47,600 h, machine/vehicle number: 325, System: TX8H Spindle passage: 80 mm Turning length max: 750mm Turning diameter: 340mm Power: 22kw Number of tool holders: 12 Shaft diameter: 40 Powered tools in all positions X axis Gjdpfxjh Dzqlo Afxjui Z axis C axis Automatic tailstock chip conveyor

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, Traub CNC lathe TNC65DGY, TX8I, year 2005, serial no. 1130 Description Y-axis on S1, V-axis, 2x C-axis, 2x rotary tool drive, 2 VDI30 turrets, Hainbuch BZI65 on main and counter spindle, parts gripper, Iemca Master 880MP-E loading magazine, Condition Very well maintained, good condition, serviced. Gujdpfswi I Eyox Afxei Machine geometry has been checked and corrected/adjusted. Machine can be viewed under power – video available. 6-month warranty on main components as follows: Spindle bearings, ball screws, linear guides, clamping cylinders. The warranty expressly applies only to spare parts, not to downtime, labor, or travel time. The warranty expressly does not apply to parts other than those listed above, e.g., wear parts, electrical, electronic, hydraulic, etc.

Condition: excellent (used), Year of construction: 2000, operating hours: 49,274 h, functionality: fully functional, machine/vehicle number: 247, turning length: 80 mm, spindle speed (max.): 12,000 rpm, feed length X-axis: 35 mm, feed length Y-axis: 37 mm, feed length Z-axis: 75 mm, bar diameter (max.): 12 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Mitsubishi TX-8i Turning length: 80 mm Main spindle Technology: belt spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12.7 mm Travel path in Z1: 75 mm Workpiece clamping: collet chuck Counter spindle Technology: belt spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel path in X3/Z4: 222 mm / 139 mm Rapid traverse in X3/Z4: 30 m/min Workpiece clamping: collet chuck Tool carrier I (X/Y) Technology: turret with 6 stations (total drive) Tool holder: Ø 25 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Travel path in X1/Y1: 35 mm / 37.5 mm Rapid traverse in X1/Y1: 15 m/min Front attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch spacing: 32 mm Tool drive: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel path in X3/Z3: 222 mm / 139 mm Rapid traverse in X3/Z3: 30 m/min Rear attachment Gedpfx Aovrz E Hjfxeui Number of stations: 4 Tool holder: Ø 28 mm Pitch spacing: 32 mm MACHINE DETAILS Dimensions: 1,450 x 950 x 1,480 mm Weight: 1,600 kg Connected load: 16 kW Installation dimensions: 7,943 x 1,430 x 1,480 mm Control switch-on time: 96,171 h Switch-on time: 100,147 h Production time: 45,983 h Spindle 1: 49,274 h Spindle 2: 47,771 h Spindle 5: 15,297 h EQUIPMENT - Chip management: Chip conveyor - Coolant management: KSS pump - Raw material feed: Bar loader, FMB minimag 3200 - Finished part removal: Workpiece removal device (pipe) - Emulsion mist extraction: Interface mechanically prepared - Tool holder: Various rigid and driven holders

Condition: good (used), Year of construction: 1989, 1 x automatic lathe Traub TD 16 year of manufacture: 1989 with hydraulic single-bar feed LNS Hydrobar 3.16 -HS 4.4 Year of construction: 1989 Equipment: 6-fold star turret Material quick clamping. Long turning device Central lubrication Vogel Accessories: see photos Gjdpfx Asvga A Tsfxeui The machine can be inspected under power.

Condition: used, functionality: fully functional, Traub automatic lathe Gusdowcqv Ispfx Afxji

Condition: not inspected (used), Year of construction: 1994, operating hours: 8,000 h, functionality: unexamined, Machine in good condition Gjdpfx Afsv Im Sdoxoui

Condition: good (used), Year of construction: 2000, Traub TNL12/7 Spindle passage 12.7mm Turning length 130mm Main spindle 4kW; oś C 0.001 grad; 12.000 rpm Revolver 1 - axis X1 Y1, 6 tools, driven tools 1.5kW Revolver 2 - axis X1 Z2, 6 tools, driven tools 1.5kW Subspindle 2.5kW; axis C 0.001 grad; 12.000 rpm Gedpfxspuilvs Afxoui Frontaparat - axis Z3; Z4/X3, driven tools Backparat - axis X4, driven tools 1.5kW Barfeeder FMB Minimag For sale 2 machines, a lot of accesories and toolholders. Machines under power, in production. 1. TNL12/7 s/n: 248 b/y: 2000, (7 linear axes X1, Z1, Y1, X2, Z2, X3, Z3 +2x C axis) + FMB Minimag + Knoll swarf conveyor 2. TNL12/7 s/n: 277 b/y: 2000, full option (9 linear axes X1, Z1, Y1, X2, Z2, X3, Z3 X4, Z4 +2xoś C axis) + IEMCA Genius + Knoll swarf conveyor

Condition: good (used), Year of construction: 2001, functionality: fully functional, Traub CNC Lathe TNC65DGY, TX8H, 2001 • 2x 10-station turrets with VDI30 rotating tool drive • C-axis on main/counter spindle • Y-axis on turret 1 • Hainbuch BZI65 on main/counter spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts list, circuit diagram, ATC optics Very good condition. Can be viewed under power. Gujdpowi Izhofx Afxei The machine's geometry has been checked and corrected/adjusted.

Condition: used, Year of construction: 1983, functionality: limited functionality, turning diameter over cross slide: 160 mm, turning length: 800 mm, spindle bore: 60 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 810 mm, rapid traverse Z-axis: 10,000 m/min, rotational speed (max.): 3,150 rpm, total height: 1,800 mm, total length: 1,800 mm, total width: 3,300 mm, swing diameter over cross slide: 160 mm, turning diameter over bed slide: 360 mm, overall weight: 3,100 kg, Technical details: TRAUB TND 360 (1983) Rotation diameter over bed: 360 mm Rotation diameter over cross slide: 160 mm Turning length: 800 mm Longitudinal stroke (z axis): 810 mm Axial stroke (x axis): 205 mm Control: TX-8 Spindle clearance: 60 mm Gjdpfx Afswm Dhxoxjui Speed: 63 - 3150 / 2 steps rev. Feed:: 10,000 mm/min. Turret head - number of stations: 8 Tailstock holder ISO: SK30 DIN 2080 Tailstock quill stroke: 105 mm Working pressure: 40 bar Total power requirement: 38 kW Machine weight approx.: 3.1 tons Machine dimensions approx. L x W x H: 1.8 x 3.3 x 1.8 m Hydraulic system dimensions: 580 x 400 x 750 mm Equipment Lathe chuck Ø 200 mm (without jaws), hydraulic

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 Guedswp D Nbjpfx Afxei 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Condition: used, Year of construction: 1988, Technical details: turning diameter over bed: 360 mm turning dia. over face-slide: 160 mm turning length: 800 mm Guodpfx Afeu Rqabjxji longitudinal traverse (z-axis): 810 mm facing movement (x-axis): 205 mm control: TX-8 spindle passage: 60 mm revolution per minute: 63 - 3150 / 2 step U/min feed:: 10.000 mm/min. tool turret - number of stations: 8 operating hours - idle run: 8834 h tailstock taper ISO: SK30 DIN 2080 tailstock quill stroke: 105 mm operating pressure: 40 bar total power requirement: 38 kW Weight approx.: 3,1 t dimension machine xH: 1,8 x 3,3 x 1,8 m dimensions of hydaulic: 580 x 400 x 750 mm Equipment: Lathe chuck Ø 200 mm, hydraulic Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system control panel Accessories Fine adjustment device for tool set-up *

Condition: excellent (used), Traub TNL12 CNC Swiss 12mm Capacity Production hours: 25596 hr. Kraft & Bauer Fire Suppression System Paper filter: Kompatkt Band Filter Configured as pictured (more photos to follow) Put into production in 2009 (originally show model) 12-ft FMB Bar Feed Guedpfxjw R E Adj Afxoi Mist Collector Chip Conveyor “2 machines available”

Condition: good (used), Year of construction: 2005, operating hours: 32,870 h, functionality: fully functional, machine/vehicle number: 6030578, turning diameter: 32 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 32 mm, We offer for sale Traub TNL26K automatic cnc lathe. Machine is connected to power and can be inpected every time by prior appointment. Year of built: 2005 Spindle passage 32mm Main spindle: 6.7/10.7kW; 8000rpm Counter spindle: 6.7/10.7kW; 8000rpm Upper turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Gujdpfx Ajvldx Aofxsi Connected load: 24kW Barfeeder: FMB Turbo 5-42/4200mm Swarf conweyor: Knoll 240 S1/100 Coolant Kompaktbandfilter: Resy Machine is sold with a lot of toolholders not driven and driven - list on attached photo.

Condition: used, Year of construction: 2011, operating hours: 51,400 h, functionality: fully functional, Traub CNC Lathe TNX65, TX8i-s, Year 2011 Model: TNX 65 Year of manufacture: 2011 Control: TX 8i-s Main/spindle and counter-spindle bar capacity up to 65 mm, 3 turrets, 3 x Y-axis, driven tools, 2 x C-axis, counter spindle, chip conveyor, band filter, coolant system, parts conveyor, new hydraulic pump Extensive accessories; approx. 4 driven tool holders, 15 fixed holders Gujdpfxjwxc Hke Afxsi Breuning short bar loader Approx. 114,586 power-on hours Approx. 51,400 production hours Good condition Connected to power, available for inspection Delivery time approx. 2 weeks, by arrangement

Year of construction: 1978, condition: used, Article: Programme-controlled automatic lathe Manufacturer: Traub Type: TF60 / 140 Yob: 1978 Bar automat Please, contact us for getting more information and pictures on mail(at) or * Godjl Rmqtjpfx Afxeui

Condition: used, Year of construction: 1993, Technical details: x-travel: 400 mm y-travel: 300 mm z-travel: 400 mm spindle revolutions per minute : 8000 U/min control: Fanuc OM clamping table: 500x300 mm magazine slots: 16 Stück tool taper: SK40 distance work spindle /surface of the table max.: 50-450 mm numbers of pallets: 2 Stück/part total power requirement: 10 kW weight of the machine ca.: 2,5 t dimension machine xH: 2,4x1,8x2,5 m transport measurements machine: 2,45x1,8x2,5 m - E-cabinet Godpfju Idn Hex Afxeui - cooling device - chip conveyor manufacturer META (conveying height 1500mm; width 200mm) *

Condition: good (used), Year of construction: 2007, Traub TNX 65/42 Milling and Turning Center Mfd. 2007 Serial #7060107 Commissioned in 2010 TX 8i-S control (Mitsubishi/Traub based control with Mitsubishi drives and motors) 15 CNC axis’s (4) X-Y-Z turrets with 10 positions each. Up to 20 tools per turret 65 mm thru hole main and sub spindle (sub spindle has coolant flush) Foot pedal control for clamp/unclamp of spindle chucks Servo driven gantry receiver Hydraulic swivel w/ pneumatic finished part and bar remnant gripper Finished part conveyor belt RESY paper band coolant filter Knoll Coolant tank with BKW refrigerated coolant temperature control 20 Bar High pressure and 8 Bar Low pressure coolant pumps Knoll chip conveyor FMB Turbo 5-55 magazine bar feeder (new in 2010) 2) Single stick turning tool holders 2) Double stick turning tool holders 1) Cut-off tool holder 1) Overdriven double radial live ER Collet tool holder 1) Overdriven radial live ER Collet tool holder 4) Radial live ER Collet tool holders 1) Radial live End Mill tool holder 1) Angle adjustable live ER Collet tool holder 2) Radial live Shell Mill tool holders 2) Axial live End Mill tool holders 6) Axial live ER Collet tool holders 43) Additional tool holders on separate list (see supplemental attachment) Guodpfx Ajq Npqmjfxsi Hainbuch main spindle collet chuck Rohm sub spindle 2 jaw chuck 2 Spare sets of spare Z-axis ball screws and bearing packs.

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 180 mm turning length: 490 mm swing diameter: 450 mm cross travel: Z-Weg: 168 mm control: Traub TX8D revolution per minute: 20 - 4000 U/min spindle passage: Ø 60 mm operating hours - idle run: 23.495 h tool turret: 12 tools total power requirement: 38 kW Weight approx.: 4,2 t dimension machine xH: 3,6 x 2,5 x 2,2 m Tool holder straight shank DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200mm hydraulic clamping Operation via double foot switch and control panel/operating panel. Coolant device The Traub carries an integrated chip conveyor with an ejection height of 1,100mm (currently without function). Accessories: multiple small parts 8 x machine feet without tailstock i.D. Gujdpfx Aju Ix N Sjfxsi *