Used Turret Punch Press for sale (29,658)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 72,918 h, laser power: 2,700 W, punching force: 22 t, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, TECHNICAL DETAILS Combined punching/laser operation: 2,585 x 1,650 mm Punching mode: 3,085 x 1,740 mm Laser operation: 3,085 x 1,650 mm Outputs Laser power: 140 - 2,700 W Maximum sheet thickness: 8 mm Cutting capacity for mild steel: 8 mm Cutting capacity for aluminum: 4 mm Cutting capacity for stainless steel: 6 mm Maximum punching force: 220 kN Active hold-down device (programmable in stages): 4.5 - 20 kN Maximum workpiece weight: 230 kg Speeds Maximum positioning speed X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min Guodpfxow Suwyo Ag Nsh C-axis punching: 60 revolutions/min Thread forming: 180 revolutions/min Punching stroke sequence (E = 1): 900 1/min Marking: 2,800 1/min Tools Linear magazine: 18 tools with 3 clamps Tool change time: 1.5 - 5 s Tool accuracy Position deviation: ±0.10 mm Average position spread: ±0.03 mm Programmable slides for punched and laser parts (max.) Size: 500 x 500 mm TRUMPF CNC control: based on Siemens Sinumerik 840D MACHINE DETAILS Laser switch-on time: 72,918 h Cutting time: 18,536 h Space requirement (width x length): 7,900 x 9,100 mm Height: 2,400 mm Weight: 22,500 kg Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h Connected load: 73 kVA

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition Gjdpfx Aedzqmzog Neuh The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: good (used), functionality: fully functional, Year of construction: 2007, laser power: 3,200 W, X working area max.: 3085 mm Y working area max.: 1650 mm Control: Siemens Sinumerik 840 D Laser power: 3200 Watts Operating hours: Power supply 41,117 h Laser ready 37,005 h Laser beam on: 7,365 h Standard equipment: - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Laser cutting head with 7.5'' lens - Quick-change device for cutting heads - Programmable cutting gas selection/pressure setting - Capacitive height control (DIAS III) - ContourLas function - Slag cone detection - Compact dust extractor - Tank heater - Automatic tool changer with 17 stations (21 – clamping claws) - 3 clamping claws - Rotation of all tools - NC-controlled, digital, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Fast shutoff of hydraulics - Automatic shutdown - Automatic part slides, each 500 x 500 mm - Sensors for both part slides - 2 good-part bins - Scrap slug extraction - Forming capability - Programmable punching tool lubrication - Programmable hold-down device - Adaptive stroke length control - Safety devices - Remote diagnostics unit - RJ 45 network connection - 3.5'' floppy disk drive + Warp detection + Blow-off device for small parts + AutoLas Plus (FocusLine) + Function for deburring and roller technology + Function for thread forming with thread former breakage monitoring + MultiShear function + MultiTool function Gujdew I Rq Ispfx Ag Nsh + Marking/fast beading function + Softpunch function + Low-scratch processing + Repositioning cylinder + Vibration-damped installation + Chip conveyor with tipping container + Additional clamping claw Automation: + Peeling system + GripMaster (3000 x 1500 mm) + SheetMaster (3000 x 1500 mm) + Lift table (300 mm)

Year of construction: 1997, condition: good (used), Used fully serviced and good condition Trumpf 500r cnc punch press for sale TRUMPF TRUMATIC T500R Large format rotation cnc punch press for sale Fully serviced Machine capable of taking multi tool Complete with tool holders and tools including multi tools Complete with Retractable clamps 3metre x 1.5metre sheet without reposition. Additional extras with the machine: Cabinet full of tooling Multitool Multiset – tool setter Guodpfxehtfp Ts Ag Njh Quickload Quick sharp tool grinder Trumpf TC 500R Turret Punch 3000 X 1500mm large format machine 1600 throat x 3metre rail. TRUMPF TRUMATIC 500 CNC PUNCH WITH CONTROL & AIR TABLE CAPACITY: 220KN SERIAL YEAR: 1997

Condition: ready for operation (used), Punching force: 40t, working range: 1500mm/900mm, max. sheet thickness: 4mm, dimensions X/Y/Z: approx. 3700mm/1700mm/1900mm, weight: approx. 2500kg. Including various stamps. Godpfx Agst Amdrj Njuh

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 17,000 h, Trumpf TruMatic 6000 FMC -1300 Sheetmaster + Gripmaster Manufacturer: Trumpf Type: TruMatic 6000 FMC -1300 Year of manufacture: 2006 Condition: used, very good. Regularly serviced by Trumpf. Machine is powered and in use. Operating hours NC hours: 70,305h Beam-on hours: 17,217h Control: Siemens Sinumerik 840 D Punching force: 220KN Laser power: 2700W Working area for laser operation approx.: 2585 x 1280 mm Working area for punching operation approx.: 2585 x 1370 mm Max. sheet thickness approx.: 8 mm Support tables Brush tables CE marking Standard equipment: Stable, easily accessible C-frame Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws 1 clamping claw Maintenance-free three-phase servo motors Parts chute 500 x 500 mm (sensor-monitored) HI-LAS high-pressure cutting TRUMPF laser: CO2 laser TLF 2700 High-frequency excitation Laser control TASC 3 Cutting head: Laser cutting head 5″ Laser cutting head 7.5″ Quick change device Cutting gas pressure setting programmable Distance control DIAS ContourLas Punching head: Hydraulic mono tool holder 360° rotation Programmable hold-down device Tool spray lubrication Punching slug extraction Control: Sinumerik 840D 10.4″ TFT color screen Teleservice Guodpewyphdjfx Ag Neh Automatic switch-off 3.5″ floppy disk drive RJ45 network connection MDE interface Safety: Multi-beam light barriers Quick switch-off hydraulics Compact dust extraction system Options: Automatic switch-off Thread former Soft punch Adaptive stroke calibration Adjustment cylinder Individually openable claws Chip conveyor with container Multishear Multitool Control Brush tables Automation SheetMaster (loading and unloading during production) Scissor lift table Chip conveyor with container TrumaGripMaster TrumaSortmaster R4 TwinCarts (unloading) Spreading magnet Rotor scanner (unloading monitoring) Autolas Plus Remaining grid pallet 2500x1250mm

Condition: like new (used), Year of construction: 2001, AMADA EUROPE 245 turret press Technical data : - CNC control : FANUC 18 i-P - pressure : 20 Ton - max. punching format without interceptor and with 31 station head : 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - max. size of punched sheet with interceptor : 1020 x 2540 mm - max. size of punched sheet with capture + 1 turn (optional) : 1500 x 2540 mm - max. sheet thickness on ball table : 6 mm - max. thickness of sheet on brush table : 3 mm - max. permissible weight on table : 100 kg - punching accuracy : +-0.1 mm - positioning accuracy : +-0,07 mm - number of pneumatic clamps/grips : 2 - number of axes controlled simultaneously : 3: X, Y, C - turret speed : 25 rpm. - number of strokes per min, distance 25.4 mm, cylinder stroke 6.5 mm : 220 strokes/min. - stroke punching, distance 1 mm, cylinder stroke 6.5 mm : 480 strokes/min. - minimum programmable increment : 0.001 mm - number of tool stations - 31, including 3 rotary ones - max. tool diameter : 88,9 mm - rotary stations : 2x1 1/4"; 1x2" - max. sheet thickness for rotary station : 3 mm - slider : hydraulic - bottom feed feed turning point : 4 programmable points - working table : X=600, Y=400 - memory capacity : 64 (~63 programs) Kb - graphic screen : 10,4" LCD - stop time : 295 ms - air pressure : 5 kg/cm2 (bar) - air volume : 250 Nl/mn - oil amount : 160 L - light curtain (3 beams) : standard in European countries - installed power : 27 kW - machine dimensions : L=4460 mm, l=2750 mm, h=2130 mm - transport dimensions : L=4820 mm, l=2500 mm, h=2414 mm - weight of punching machine AMADA EUROPE 245 : 10 000 kg - time worked : 35 000 working hours Production 2000.12 , installation 2001 1 szy owner , service book with full history of the machine, machine in perfect condition, worked on thin sheets Start-up warranty Training on operation included in the price. Gedpjhvaaaefx Ag Nsuh Contact person : Robert 500114006 Greetings

Condition: used, Double column eccentric punching press BLEMA Gotha type PEZ 160-50 MHSY-ES Eccentric press with roller feed ALBA Machine no. No. 88151005 Year of construction 1988 / 92 Pressure force 160 ton. Frame width 970 mm Stand width sideways 560 mm Table size 900 x 900 mm Gusdpedzqlvofx Ag Njh ram surface 900 x 700 mm Tool installation height 560 mm, max. 700 mm Stroke adjustment 8-160 mm Ram adjustment travel 125 mm Stroke rate 25 to 70 strokes/min. Belt width in roller feed max. 400 mm Motor power approx. 15 kW Mains connection 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Automatic stroke adjustment - ram weight compensation cylinder with compressed air - Hydraulic overload protection in the ram - Pneumatic clutch/brake combination - Central oil lubrication - Precisely guided press ram with oil-lubricated guides - UNIDOR press control - Swiveling control panel - Press and feed control cabinets, together on one platform, adjacent Platform dimensions 3400 x 2250 mm, height without feet 2950 mm Width of the press without feed 2100 mm Depth of the press with drive motor 2300 mm Overall height of the press 4150 mm Weight of punching press approx. 18 tons. For transportation, the drive motor is removed and the machine is placed on its face. In addition: NC roll feed straightening machine ALBA type GGVHY400 Apparatus no. 1405 and 1406, order no. 910708 (year of manufacture 1992) - ALBA PSS 300 feed control - Feed length infinitely programmable from 0.1 to 6500 mm per stroke - Belt thickness at 400 mm width max. 3 mm - Belt thickness for 300 mm width max. 4 mm - Belt cross-section max. 1200 mm2 - Roller drive hydraulically controlled by the feed - Height-adjustable feed unit on the press to adjust the material infeed height - Hydraulic unit opposite - Drag straightener with hydraulic opening and closing Weight of the complete system approx. 24 tons Space required for transport a mega trailer with an internal height of 3 meters and a loading length of 13.6 meters good condition

Condition: good (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX Guodpowld Suofx Ag Njh - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Year of construction: 2001, condition: excellent (used), Quality used Trumpf Trumatic 500R CNC Punch Press for sale A late Trumpf 500 just before the 5000r Gujdoh Nf Upjpfx Ag Neh 2.5metre x 1250mm sheet metal before reposition 1300mm throat New / Year 2001 Fully serviced With manuals Good condition and be seen working in production Complete with: · Capable of taking multi tool a good selection of tooling available along with multi tools

Year of construction: 1976, condition: ready for operation (used), Three Illig punching machines are available for the precise punching of thermoformed plastic parts from film material. Working width: approx. 900mm, working height: approx. 120mm, roller diameter: approx. 196mm, machine dimensions X/Y/Z: approx. 2500mm/1300mm/1600mm, weight: approx. 750kg. Including two hydraulic punching machines Wolf EHPT 6E and two manual swivel arm punching machines. On-site inspection is possible. Gedpfx Ajwixybsg Njuh

Condition: excellent (used), Year of construction: 2013, operating hours: 8,500 h, stroke length: 445 mm, number of axes: 6, Number of axes: 6 Pressing force: 3,200 kN Gjdswxwwdepfx Ag Neuh Max. machining length: approx. 440 cm Weight: 22,800 kg Max. load capacity: 150 kg Runway length: 12 meters

Condition: ready for operation (used), Year of construction: 2003, operating hours: 24,628 h, General Data Machine weight 17500 kg Control Unit Model WIN NT Brand TRUMPF Main Drive Punching force 220 kN Movement X-Axis Movement 3125 mm Y-Axis Movement 1650 mm This Trumpf Trumatic 5000 R Punching machine was made in 2003 and has 24628 production hours. It is equipped with a Trumpf WIN NT control unit. The machine has a punching force of 220 kN. Application Types Punching Gedpfxow Nb D Ue Ag Neuh

Condition: good (used), Hoza EMU punch This machine is ideal for punching out small molded parts from paper, rubber or textile goods. It has a high pressing force and fits on any stable table. The cut is initiated via a two-hand safety control. Gujdpfx Agsuzhmte Neh Forged blades or steel rule blades can be used in the machine. Knife stroke: 30 mm Max. punching format: 150 x 100 mm Weight: approx. 150 kg Color: hammer blow blue Dimensions: 450 x 360 x 600 mm Further items in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 47,000 h, laser power: 2,000 W, punching force: 76 t, workpiece weight (max.): 120 kg, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Special features: + Thread forming function with thread breakage detection + MultiTool function + Marking/Fast beading function + Repositioning cylinder Godpfxewcq Hgs Ag Nouh + Sensor for part chute Standard features: - Stable C-frame - Coordinate guide with integrated linear magazine - 21 pockets for tools and clamps - 2 clamps - Drives: maintenance-free three-phase servo motors - Brush tables - TCF1 laser (2000W) - HI-LAS high-pressure cutting - Fast machining with SprintLas - Programmable Cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Cutting head quick-change device - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotating tool holder - Automatic repositioning device with hold-down clamp - Automatic part chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamps - Good parts container - Spray lubrication for punches - 2nd lubricant container - Punch slug extraction system - Chip bucket - Hydraulic quick shut-off system - External control panel - 15" TFT touch color screen - USB stick interface - 3.5" floppy disk drive - Safety features - RJ45 network connection - Network connection - Detailed operating instructions - Remote diagnostics system

Year of construction: 2000, condition: excellent (used), very clean / low hours used Trumpf Trumatic 500R CNC Punch Press for sale 2.5metre x 1250mm sheet metal before reposition 1300mm throat New / Year 2000 Fully serviced With manuals Good condition and can be seen working in production Complete with: Gedpong Al Aofx Ag Njuh

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 35,000 h, laser power: 2,700 W, punching force: 22 t, workpiece weight (max.): 230 kg, Equipment: cooling unit, TECHNICAL DETAILS Punching force: 22 tons Control system: Siemens Sinumerik 840 D Punching work area: 3,085 x 1,740 mm Combined work area: 2,585 x 1,650 mm Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Max. punching diameter: 76.2 mm Rapid traverse X / Y / simultaneous: 90 / 60 / 108 m/min Tool holder: Hydraulic mono-tool holder, 360° rotation Pressure clamp: Programmable for repositioning operations Chip handling: Chip bucket Laser unit: High-frequency excited TruFlow CO₂ laser Laser work area: 3,085 x 1,650 mm Laser power: 2,700 watts Laser cutting heads: 5" lens 7.5" lens, quick-change cutting head system Distance control: DIAS Cutting technology: HI-LAS high-pressure cutting Functions: AutoLas, ContourLas Laser control: TASC 3 MACHINE DETAILS Width: 2,400 mm Length: 8,700 mm Height: 7,800 mm Total weight: 22,500 kg On-time: 35,000 h Laser on-time: 2,507 h Godpfxev N Hxaj Ag Nouh Beam on: 480 h EQUIPMENT - 500 x 500 mm sensor-monitored parts chute - 2 good parts crates - AutoLas - ContourLas - Ejection cylinder on laser chute - Automatic tool length compensation - Tool spray lubrication - Punch slug extraction - 2nd lubricant container - Multi-beam Light barriers - Hydraulic quick-release system - Extraction and compact dust extractor - MultiTool function - Thread forming function - Multishear function - Multibend function - Singing/fast beading function - TRL Sheetmaster preparation - Vibration-damped installation - Brush tables

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 41,804 h, used TRUMPF TruMatic 6000 (K01) – Medium format Technical data: Year of manufacture: 2008 Last maintenance: 18.03.2025 Gedpfowkd Efsx Ag Neuh Operating hours NC: 41804 Resonator hours: 14466 Beam ON hours: 2054 Y-Axis: 1300 mm Additional equipment: various tools Recently installed new parts: Conversion to laser control TASC5 (01/2025) Control panel with display (01/2025) Box PC (01/2025) Hydraulic punching head/multilayer (10/2021)

Condition: used, Year of construction: 2001, operating hours: 13,030 h, machine/vehicle number: 090038, punching force: 2,200 t, We are offering our Trumatic 5000R laser punch press for sale. The machine is used and in very good condition. Gedpjunh D Defx Ag Nsuh Basic data from the type plate: Max cutting force: 220 kN Type 9121 No. 090038 Year of manufacture: 2001, spare parts Network: 400 V/50 Hz Connected load: 29kVA Supply voltage: 400V Control voltage: 24V= Necessary protection: 3x50A Compressed air connection: 7-14 bar Machine weight: 17500kg Main features of the machine: - Tool rail - 21 tools and 4 handles - working area 3070x1660mm - max. sheet thickness 8mm - Rotation axis of the tool head C1 and C2 - Forming function - Thread function - Multibend function - Pneumatic press - automatic sliding of the details 500x500mm - water-cooled servomotors Additional equipment of the machine: - light barrier Softpunch function - Details slide sensor - Device for blowing out small details - System for chip extraction - Separate lubrication of punching and threading tools Number of NC units: 13030h We sell machines without tools. Machine regularly maintained by authorized Trumpf service with original spare parts, last machine maintenance on 21.02.2024r.

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 48,000 h, machine/vehicle number: A0230A1295, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 12 mm, No minimum selling price - guaranteed knockdown to the highest bid! TECHNICAL DETAILS Make: TRUMPF Type: Trumatic L 3050 - 5 kW Gujdpeu R Sa Ajfx Ag Nsh Year of manufacture: 2006 Working range X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 115 mm Control system Type: Siemens Sinumerik 840 D Laser power Laser power: 5,000 W Max. Sheet thickness: Mild steel 25 mm Max. Sheet thickness: Stainless steel 20 mm Max. Sheet thickness: aluminum 12 mm Operating hours Operating hours: approx. 48,000 hours EQUIPMENT Closed machine frame with integrated laser unit Laser unit: TLF 5000 CO₂ laser, high-frequency excited, cooling unit, logbook function Automatic pallet changer Longitudinal conveyor belt for small parts/waste Drives: Gantry drive in combination with linear direct drives Laser power control HI-LAS high-pressure cutting Plasma sensor system (PMS) Fast processing with SprintLas ContourLas for the production of small holes Programmable power cycles Microweld Programmable cutting gas pressure setting Laser cutting head with 5" lens and laser cutting head with 7.5" lens Quick-change cutting head device Automatic sheet outer edge detection Capacitive height control (DIAS) Process Control System (PCS) Position laser diode Automatic switch-off Work area lighting SIN 840D control system: Open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice Workshop programming ToPs 100 lite Safety and security Multi-beam light barriers Beam guidance completely encapsulated and ventilated with nitrogen Monitoring system Multi-chamber extraction and compact dust extractor Protective cabin Network connection BNC/RJ-45 network connection Electrical equipment Voltage: Three-phase current 400 V / 50 Hz EXTENDED EQUIPMENT Liftmaster included

Condition: like new (used), Good parts conveyor belts for TruMatic 7000 / 6000 Guedpfx Ageu S Ny Ts Neh Very good condition

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 14,161 h, machine/vehicle number: A0110A0036, laser power: 2,000 W, punching force: 16 t, sheet thickness (max.): 4 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, space requirement length: 6,000 mm, space requirement width: 6,900 mm, TECHNICAL DETAILS Combined operation: 2,175 x 1,250 mm Laser operation: 2,500 x 1,250 mm Punching mode: 2,500 x 1,250 mm Outputs Maximum sheet thickness: 4 mm Maximum punching force: 165 kN Maximum workpiece weight: 120 kg Laser power: 2000 W Laser speeds X-axis: 90 m/min Godjvgc Apspfx Ag Njuh Y-axis: 60 m/min Simultaneous: 108 m/min C-axis punching: 60 m/min C-axis thread forming: 180 m/min Punching stroke sequence: 600 1/min Stroke sequence marking: 1,300 1/min Tools Tool positions in the linear magazine: 19 (with 2 clamps) MultiTool capacity: 2 to 10-fold Number of tools in MultiTool: 19 to 190 Rotation of all tools: 360 Tool change time: 0.9 - 3.6 s Maximum punching diameter: 76.2 mm Maximum bending height (MultiBend): 25 mm Position accuracy Position deviation: ±0.1 mm Average position spread: ±0.03 mm MACHINE DETAILS Total weight: 12,500 kg Space requirement: 6,000 x 6,900 mm Connected load: 55 kVA Laser cutting time: 14,161 h Laser switch-on time: 63,575 h

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 44,973 h, laser power: 2,700 W, punching force: 22 t, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Description X working range max.: 2585mm Y Working range max.: 1280mm Control: Siemens Sinumerik 840 D Laser power: 2700 Watt Guedpfx Astpguzsg Njh Laser beam on: 6054 hours Laser on: 29826 hours Operating hours: 44973 hrs. Standard equipment: - Sturdy C frame - Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored 500x500mm parts chutes for punching and laser station, ejection cylinder on laser chute - Laser unit: High-frequency excited CO2 laser TLF 2700W, vibration-insulated, integrated in machine frame, incl. cooling unit and DIAS 3 laser controller - HI-Las high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5'' lens, quick-change device, distance control - Sinumerik 840D control system, 10.4'' TFT color screen, simple operation, online help, diagnostic functions, maintenance logbook, technology data, job tables, Teleserice, 3.5'' floppy disk drive, RJ45 network connection Safety: Multi-beam light barriers, quick shut-off hydraulics, suction and compact dust extractor, protective device against stray radiation on the cutting head + TLF 2700 laser + Thread forming function + MultiTool function + Signing / fast beading function + MultiBend function + Rolling technology function + Repositioning cylinder + bulge detection + Chip conveyor automation + Sheetmaster + Gripmaster + Trumasort R4

Year of construction: 2006, operating hours: 46,547 h, condition: excellent (used), functionality: fully functional, Laser punch press Trumpf TruMatic 6000 L with TrumaLift SheetMaster, ToolMaster and GripMaster as well as and scissor lift table. SheetMaster: not only loads and unloads the machine, it also sorts the parts the parts reliably ToolMaster: automatically changes the tools quickly, safely and conveniently Godpfx Ajn Nxw Dog Neuh GripMaster: reliably moves residual grids and strips TECHNICAL DETAILS working area: 2585 x 1280 mm Control: Siemens Sinumerik 840 D laser power: 3200 watt sheet thickness mild steel: max. 8 mm sheet thickness stainless steel: max. 8 mm sheet thickness aluminum: max. 4 mm workpiece weight: max. 200 kg Accuracy: +/- 0.1 mm Punching force: 22 t punching diameter: max. 76,2 mm C-axis punching: 330 rpm stroke sequence: 450 - 1000 1/min stroke sequence marking: 2800 1/min MACHINE DETAILS Laser switch-on time: 46,547 h cutting time: 23.580 h length: 7500 mm width: 8100 mm height: 2400 mm Weight: 16000 kg (basic machine) Operating voltage: 400 V / 50 Hz Connected load: 76 kVA

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 44,973 h, laser power: 2,700 W, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,585 mm, travel distance Y-axis: 1,280 mm, number of slots in tool magazine: 21, AUTOMATION - SheetMaster - GripMaster - TrumaSort R4 ADDITIONAL EQUIPMENT - Laser TruFlow 2700 - MultiTool function - Thread forming function - Marking/fast beading function - MultiBend function - Rolling technology function - Repositioning cylinder - Bulge detection - Chip conveyor TECHNICAL DETAILS Punching working area: 2,585 x 1,280 mm Laser working area: 3,085 x 1,370 mm Combined working area: 3,085 x 1,280 mm Control: Siemens Sinumerik 840 D Laser Laser power: 140 - 2,700 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Workpiece weight: max. 200 kg Punching Punching force: 220 kN Active hold-down clamps: 4.5 - 20 kN Linear magazine: 21 tools Programmable slide: 500 x 500 mm Positioning speed X / Y / simultaneous: 90 / 60 / 108 m/min C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 900 rpm Signing stroke sequence: 2800 rpm Position deviation: ± 0.10 mm Position scatter: ± 0.03 mm MACHINE DETAILS Length: approx. 7.5 m Width: approx. 8.1 m Height: 2.4 m Weight: 16 t Gjdpfx Agovxivmo Neuh Laser switch-on time: 29,826 h Cutting time: 6,054 h Machine switch-on time: 44,973 h Compressed air connection: 7 ± 1 bar Consumption of laser gas CO2 / N2 / He: 1 / 6 / 13 l/h EQUIPMENT - Stable, easily accessible C-frame - Drives with maintenance-free three-phase motors - Programmable hold-down device for repositioning - Sensor-monitored part slides for punching and laser station, ejection cylinder on laser slide - Laser unit: High-frequency excited CO2 laser, vibration-insulated, including cooling unit and laser control DIAS 3 - HI-Las high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Programmable cutting gas pressure setting - Laser cutting head: 5'' lens, quick-change device, distance control - Multi-beam light barriers, quick hydraulic shutdown, extraction and compact dust extractor, protective device against scattered radiation on the cutting head