Used Varnishing Machine for sale (65,182)

Condition: used, SincoTec Type: POWER SWING 20 kN POWER SWING 20 kN resonance testing system Sincotec Power Swing 20 kN resonance testing system Manufacturer's maintenance performed Nsdpfx Aozii A Dsbuewn General information For sale is a used Power Swing 20 kN resonance testing system from Sincotec Test Systems GmbH. The testing system was used in a single-shift operation, and all maintenance work was performed regularly by the manufacturer. Special features: Robust construction for continuous operation Precise resonance testing up to 20 kN Manufacturer's maintenance available Ideal for research, testing, and development applications Technical data – Testing system Feature / Value Overall height of testing system 1215 mm (without clamping device) Width of testing system 2005 mm Depth of testing system 1205 mm Maximum force amplitude 10 kN Maximum total force ±20 kN Accuracy of measuring sensors min. Class 1 (according to DIN EN 10002-3) Technical data – Control cabinet Feature / Value Overall height of control cabinet approx. 1800 mm Height of tabletop 1080 mm Width of control cabinet 650 mm (narrow tabletop) / 1450 mm (wide tabletop) Depth of control cabinet 700 mm (narrow tabletop) / 800 mm (wide tabletop) Weight 152 kg (small tabletop) 187 kg (large tabletop) with (granite plate) 247 kg Conditions for the installation site Feature / Value Space requirement 4.3 × 3.0 m Required ceiling height 2.5 m Floor load-bearing capacity 234 N/cm² Mains conditions Feature / Value Voltage 400 V three-phase with neutral conductor and protective earth Phase sequence Right-rotating field Voltage fluctuations ≤ ±10 % Short-time dips < 20 ms Limits for sustained disturbances Radio interference level A according to VDE 0871 Frequency 50 Hz ± 1 % Protective earth / Grounding resistance < 0.3 Ω Connection and protection Feature / Value Voltage supply 400 V / 50 Hz (Right-rotating field) Connection plug CEE socket, 5-pole, 16 A Protection 16 A Weight of testing system approx. 3.6 t Max. weight clamping device 250 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 64,000 h, machine/vehicle number: S1631C0027, laser hours: 40,000 h, laser power: 3,000 W, Equipment: cooling unit, documentation/manual, safety light barrier, For sale – TRUMPF TruLaser Cell 8030 L60 (2015) | 3D laser cutting system Professionally dismantled and stored – ready for immediate pick-up. The machine ran in series production until shutdown, was serviced annually and exclusively by TRUMPF, and has now been professionally dismantled by us and stored at our site in Gouzeaucourt (northern France). Ideal for automotive, aerospace and general metalworking requiring precise 3D contour cutting of tubes, hydroformed parts and complex profiles. Machine data - Model: TRUMPF TruLaser Cell 8030 L60, year 2015 - Laser power: 3,000 W (TRUMPF) - Serial number: S1631C0027 - Maintenance: annual service exclusively by TRUMPF – full documentation available - Status: dismantled, stored, ready for pick-up Key benefits - 5-axis CNC kinematics for demanding 3D geometries - Enclosed, automation-ready working area - Proven in one-off and medium series production - Complete TRUMPF service history – no third-party interventions Our added value: modular handover We are not a dealer but an active contract manufacturer (SOERMEL Groupe, France – IATF 16949 / EN 9100 / ISO 9001). Choose the package that fits: M1 – Ex works: pick-up at our site in Gouzeaucourt, loading onto your truck. M2 – Delivered: M1 + international transport, insurance, unloading at your site (DAP/DDP on request). M3 – Delivered & installed: M2 + mechanical installation, utility connection, first start-up, laser alignment. M4 – Turnkey: M3 + commissioning, process validation with your parts, operator and maintenance training, acceptance protocol. Nwodpfxe Ad Hcns Abuon Inspection of the stored machine in Gouzeaucourt by appointment. Price on request.

Condition: good (used), Year of construction: 2014, Manufacturer: B&E Equipment / I-Pak Type: BA18H Year of manufacture: 2014 Serial numbers: 14/0558 and 14/0557 Nwjdpfx Abozbyn Nouon Each unit includes 1 Nordson ProBlue 4 hot melt adhesive applicator and 4 liters of hot melt adhesive. Weight: approx. 1,500 kg Dimensions according to documentation: approx. 3,741 x 1,718 mm and height approx. 2,800 mm (including operating light, which can be unscrewed). For carton dimensions: 600 x 400 x 400 mm (can be changed with a different tool). 400V, 8kW, 15A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg A video of the machine is available!

Condition: used, Year of construction: 2014, workpiece weight (max.): 3,000 kg, travel distance X-axis: 1,200 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,000 mm, Coordinate Measuring Machine Manufacturer: MITUTOYO Type: Crysta-Apex S123010 Year of manufacture: 2014 Nwedpozbc Hhefx Abuen Technical data: - X-axis: 1,200 mm - Y-axis: 3,000 mm - Z-axis: 1,000 mm - Resolution: 0.0001 mm - Max. workpiece height: 1,200 mm - Max. workpiece weight: 3,000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2009, travel distance X-axis: 4,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, table length: 4,100 mm, table width: 1,700 mm, table load: 12,000 kg, spindle nose: SK 50, Gantry Machining Center Manufacturer: VTEC Model: VB-4020 Year of manufacture: 2009 Control system: Heidenhain iTNC 530 Technical details: X-axis: 4,100 mm Nedpfx Asz Dby Isbuewn Y-axis: 2,000 mm Z-axis: 800 mm Table dimensions: 4,100 x 1,700 mm Max. table load: 12,000 kg Number of tool stations: 32 positions Tool holder: SK 50 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Several wear parts on the machine have recently been replaced. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: good (used), Year of construction: 2024, The complete system was acquired in 2024 and used only during a short-term clinical study. Certain individual components may bear manufacture dates from 2023, which is normal for a multi-component system. Nwodjz Dq Stepfx Abuen Manufacturer: Optos Model: California / P200DTx Configuration: FA – Fluorescein Angiography Condition: Pre-owned, very limited use After the study was completed, the system was professionally disassembled and prepared for transport. It is currently securely packed and palletized in its original transport packaging. The Optos California is a high-end, ultra-widefield retinal imaging system, capable of capturing up to 200° of the retina in a single image, with an exposure time of less than 0.4 seconds. Configuration: Optos California P200DTx imaging system Touchscreen tablet with stand Image server with monitor Dedicated Optos device table Color RG imaging Red-free imaging Choroidal imaging Green autofluorescence Fluorescein angiography (FA) Technical highlights: optomap plus resolution: 14 μm optomap resolution: 20 μm DICOM compatible 100–240 VAC, 50/60 Hz Inspection available by appointment. Worldwide insured shipping can be arranged. Software license, activation, and login credentials are not included; these must be arranged directly with Optos by the purchaser.

Year of construction: 2023, condition: used, Measuring Machine Manufacturer: PROZAP Type: EK0 EOL station Year of manufacture: 2023 Control system: Siemens Technical data: - Voltage: 400 V, 50 Hz - Current: 40 A - Operating pressure: 4.5 bar - Total power: 15 kW - Weight: 1,500 kg In our assessment, the machine is in mint condition. Nwedpfozbvivsx Abusn Technical features: - Dimensional inspection of the cooling plate using measuring heads - Automatic label application Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Year of construction: 2013, condition: used, Cracking Machine Manufacturer: MAUSER + KRAUSECO Type: PS Cracker Year of manufacture: 2013 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Nwsdpfx Asy Ihbljbuon Subject to technical changes, errors, and prior sale.

Condition: not inspected (used), Stud welding machine Manufacturer: NELSON Type: FSE 100 / FSE 500 Includes welding head, hoses, and control cabinet 15 x Nelson FSE 100 + N4 Inverter 5 x Nelson FSE 500 + N4 Converter Nwjdpfx Aboy Ihbxousn Price per unit. Condition: used, untested In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2015, operating hours: 56,000 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 840 mm, travel distance Z-axis: 550 mm, torque: 140 Nm, controller manufacturer: Siemens, controller model: 840D, overall weight: 9,700 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 17,500 h, spindle motor power: 22,500 W, spindle nose: HSK 63, number of slots in tool magazine: 24, tool length: 320 mm, Equipment: chip conveyor, Vertical Machining Center Manufacturer: CHIRON Model: MILL 1250 Nwsdpfx Absy Tbtljujn Year of manufacture: 2015 Control system: Siemens 840D Technical specifications: - X-axis: 1250 mm - Y-axis: 840 mm - Z-axis: 550 mm - Speed range - main spindle: 12,000 rpm - Drive power - main spindle: 22.5 kW - Max. torque: 140 Nm - Number of tools: 24 - Max. tool length: 320 mm - Spindle taper: HSK 63 - Operating hours: 56,000 h - Spindle hours: 17,500 h - Machine weight (approx.): 9.7 t Equipment & Accessories: - Internal Coolant Supply (ICS) - Chip conveyor - Glass scales on all axes - Automatic door - Swivel axis with counter-bearing (Fibro) 4 identical machines are available. The machines were used for light countersinking and drilling operations. In our assessment, the machine is in very good used condition and can be inspected under power by appointment. Subject to technical changes, errors, and prior sale.

Year of construction: 2004, condition: used, Superfinishing machine Manufacturer: SUPFINA Type: 668WR800 Year of manufacture: 2004 Control system: Siemens Sinumerik Njdpfx Asxwdwlebuewn Includes Felsomat FZ250 loading system Connected load: 12 kVA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2002, Crankshaft Grinding Machine Manufacturer: GST Model: S2-900 / 190 DKGM Year of manufacture: 2002–2004 2 machines are available. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale. Njdpsx Ik Tksfx Abujwn

Condition: used, Year of construction: 2008, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table width: 550 mm, table length: 700 mm, spindle speed (max.): 42,000 rpm, spindle nose: HSK 40, number of slots in tool magazine: 20, Vertical Machining Center Manufacturer: RÖDERS Model: RFM 600 DS Year of manufacture: 2008 Control system: Röders RFM 600 DS Technical data: - X-travel: 600 mm - Y-travel: 450 mm - Z-travel: 300 mm - Spindle speed: 42,000 rpm - Table size: 700 x 550 mm - Tool holder: HSK 40 Nedpfxox Iwg Ds Abuswn - Number of tool positions: 20 Equipment: - Extraction system (Keller) - Pallet system (Röders RC 2) Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: defective spare-parts repository (used), Universal Machining Center - Parts Donor Manufacturer: MIKRON Model: HSM 400 U Nedpfx Aoyzt A Ujbuown The machine is defective and is being sold as a source of spare parts. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: defective spare-parts repository (used), Year of construction: 2001, travel distance X-axis: 390 mm, travel distance Z-axis: 435 mm, spindle speed (max.): 4,500 rpm, turning diameter: 220 mm, Vertical Turning Machine - Parts Donor Manufacturer: EMAG Model: VL5 Year of manufacture: 2001 Control system: Fanuc 18i The machine has not been tested and is being sold as a source of spare parts. Technical data: - Turning diameter: 220 mm - X-axis travel: 390 mm - Z-axis travel: 435 mm - Tool holder: VDI 40 - Number of tool stations: 12 positions - Spindle speed: 4,500 rpm Accessories, tools, and workholding devices shown in the images are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale. Njdpfxozz S R Ie Abuswn

Condition: used, Year of construction: 1998, Cylindrical Grinding Machine Manufacturer: JUNKER Model: Jumat 5002/10 CNC Year of manufacture: 1998 Njdoxc Nyvspfx Abuown Control system: Fanuc Equipment & Accessories: - Extraction system - Felsomat loading system An accessory package can be purchased separately. In our assessment, the machine is in very good used condition and can be inspected under power by appointment. Accessories, pictured tools, and workholding devices are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2010, travel distance X-axis: 500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller manufacturer: Siemens, controller model: 840 D, table load: 400 kg, overall weight: 10,500 kg, spindle speed (max.): 20,000 rpm, spindle nose: HSK 63 A, tool length: 330 mm, Universal Machining Center Manufacturer: MAP Type: LPZ 500 Year of manufacture: 2010 Control system: Siemens 840 D Technical data: Travel ranges: - X-axis travel: 500 mm - Y-axis travel: 700 mm - Z-axis travel: 500 mm - A-axis: 240° (-120/+120°) - C-axis: 360° Work table: - Face plate diameter: 440 mm - T-slot width: 14 mm - T-slot spacing: 75 mm - Max. table load: 400 kg Main spindle: - Max. speed: 20,000 rpm - Tool holder: HSK 63 A Tool magazine: - Max. tool length: 330 mm - Tool diameter: 125 mm - Chip-to-chip change time: 4.5 sec - Machine weight: approx. 10.5 t - Space requirements: approx. 2.5 x 5.2 x 3.5 m Accessories: - Kuka robot KR200-3 comp In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale. Nedpfx Aboxq R E Nouewn

Condition: used, CNC press brake WEINBRENNER, type EGP 80 Die-bending machine (DEFECTIVE) Serial No. 1257G, Year of manufacture 1991 Pressing force 80 tons Working length 1300 mm Stroke 260 mm with Cybelec DNC 94 PS control system with back gauge Own weight 8800 kg without tools, tooling system probably TRUMPF Machine is not functioning, control system does not boot up. The parameters are likely lost. Weight 7300 kg (on the nameplate) Weight 8800 kg (weighed on the crane) Nedpfx Ajz A Ia Sjbuown in good condition

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, operating hours: 3,560 h, overall weight: 1,850 kg, Phantomatic T 3 Star Nwjdpfx As Afbrtsbujn >The machine is currently undergoing refurbishment; further photos will follow.< The machine has the following options: > Software CamPlus / Job > Remote control MG Pilot > 8-tool automatic tool changer > Automatic clamp positioning > Enclosed housing > 2 barriers (for multi-piece machining and overlength machining) > 4-sided machining

Condition: used, total height: 2,400 mm, total length: 5,300 mm, total width: 2,350 mm, Year of manufacture: 2022 Colour: Grey Empty weight: 4.000 kg What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2022 - Documentation available: Yes - CE marking present: Yes - Serial number: 30B.11.040.22 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: WoodFlash - Safety feature: Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: PICCHIO 2200 - └ Year of manufacture: 2022 - Tools included: Yes - CNC options: Manual control - CNC documentation available: User keys/licenses, USB stick - Table length [mm]: 3300 - Table width [mm]: 1280 - Working range X [mm]: 3300 - Working range Y [mm]: 1280 - Z-axis working range [mm]: 250 - X-axis maximum stroke [mm]: 4000 - Y-axis maximum stroke [mm]: 1670 - Z-axis maximum stroke [mm]: 500 - Voltage [V]: 400 - Current consumption [A]: 40 - Power [kW]: 18.0 - Installed length [mm]: 6250 - Installed width [mm]: 3494 - Installed height [mm]: 2300 - Transport dimensions: 5300mm x 2350mm x 2400mm (l x w x h) Njdpfx Aszwul Hjbuewn - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2008, Working hours: Nwsdpszquqiefx Abujn - Power on: 44113 - Spindle hours: 13284 Equipped with: * CNC control SIEMENS 810 D powerline * 20-station ATC * Coolant equipment * Chip conveyor x-travel 1035 mm y-travel 560 mm z-travel 510 mm table surface area 1200 x 560 mm table load 1000 kg tool taper SK 40 spindle turning speed - stepless 20 - 8000 rpm feeds longditudinal/cross/vertical - 20000 mm/min rapid traverse 25 m/min spindle drive motor 13 kW dimensions of machine 2,6 x 2,6 x 2,7 m weight of the machine approx. 4,1 t

Condition: used, functionality: fully functional, Year of construction: 1994, Tracto-Technic tube bending machine Nwsdpfx Abs Afhr Hsusn Model Tubobend Capacity : 42 mm. Year : 1994 Bending tools : 42 – 38 – 30 – 25 mm. including mandrels

Condition: new, Year of construction: 2026, laser power: 6,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New fiber lasers from the HLB series - optimized equipment with an eye on the essentials - low acquisition costs Max Photonics resonator, Raytools auto focus cutting head guarantee high-quality, competitive laser cutting with minimal maintenance costs FURNISHING: Cutting head: Raytools - Auto Focus Resonator 6KW Automatic changing table including light barriers Suction: Welldone CE certified Cypcut control with touchscreen including online programming directly on the control Nodpfx Abjzyaf Rjuown Sheet format 4,000mm x 2000mm Connection value max. 30kW Installation area approx. 11,000mm x 3,500mm x 2,200mm The machine is included 12 month guarantee Installation Delivery within Germany and Software/operator training offered Optional: Offline programming CAD CAM software Libellula [CUT] Connect gases, electricity, done. In our exhibition we have various laser machines from our manufacturers under power and various materials for testing. We would be happy to invite you to come and cut your drawings or material. We, the company H+S, have been an exclusive trading company and service provider for YAWEI machines for 20 years, of which we have been selling their fiber lasers for around 15 years. We have already installed more than 300 fiber lasers from YAWEI. Come and see for yourself in your area. Call us and visit us!

Condition: excellent (used), Year of construction: 2015, operating hours: 6,000 h, functionality: fully functional, TOP CONDITION Nedpfxo Afi Rwe Abuown

Condition: excellent (used), Year of construction: 2007, operating hours: 81,000 h, Technical Data Year of manufacture: 2007 Clamping side Clamping force: 1300 t Opening stroke/installation height max.: 2300 mm Distance between clamping plates max.: 4000 mm Tool installation height min./max.: 1000 - 1700 mm Clamping plate max. height: 1910 mm Tool size min.: 1000 - 1700 mm Distance between tie bars: 1500 mm Nozzle radius: R40 mm Tool weight: 29000 kg Ejector stroke: 350 mm Injection side Screw diameter: 135 mm Injection volume: 8588 cm³ Injection pressure: 1390 bar Injection weight: 7729 g/shot Nwodpfo Afpalox Abujn Core pulls AWS/DS: 1/1 Needle gate pneumatic: 1 The machine is supplied with a Kuka robot and can be inspected during production.