Used Veneer Clipper for sale (560)

Condition: good (used), Code: 0270 Brand: EMME ELLE Model: G.L.C. 1200 - CE Standard Longitudinal glue jointing machine for veneer - CE Standard The longitudinal jointing machine allows a perfect jointing of two veneer sheets in one operation by using a patentedsystem for the glue application. The machine is equipped with two tanks for the mass glue application. This innovation grants high quality and high jointing finishing since the glue is simultaneously applied on both edges to be jointed. The advantages of this type of glue processing are the following: 1_higher working speed (the machine can reach a speed of 35/40 mt/min with some wood types.) 2_In case, for any reason, no glue is applied on one of the two edges, the jointing is anyway granted since the glue is applied on the other edge as well. 3_A high resistant jointing is granted by applying the glue on both edges, since the two sheets are jointed with glue to glue and not with glue to wood. Ljdpfx Adsymfxqstohf Technical characteristics Veneer sheet dimensions Thickness mm 0.4-2 Min. Length mm 360 Min. Width mm 45 Max. Width mm 1200 Technical Characteristics Heating area length mm 1200 Heating temperature up to 240° Transport speed 10-40 m/min Glue type UREA Power connection 6 Kw Voltage 400 V / 50 Hz Machine dimensions Length mm 2600 Width mm 2000 Height mm 800 Weight Kg. 2000

Condition: excellent (used), Year of construction: 1998, I sell Polymac Rubber edgebander little used, like new. Lhedpfx Adsuvdzuetsf

Condition: excellent (used), Poly-Clip DFC 8162 Automatic Double-Clipper. can fit most vacuum fillers. Suitable for large calibres up to 180mm, electrics in mint condition. Lhsdpfexbxxrjx Adtsf

Condition: ready for operation (used), Shelf length 2500 mm Lhjdjyynzpopfx Adtef Shelf width 1200 mm 4 hydraulic pistons 75 mm Clearance 400 mm Water heating

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 962 t, stroke length: 200 mm, table width: 1,400 mm, table length: 2,750 mm, working width: 1,400 mm, operating temperature: 135 °C, operating pressure: 290 bar, workpiece height (max.): 200 mm, workpiece weight (max.): 250 kg, cylinder diameter: 270 mm, opening width: 200 mm, plate width: 1,400 mm, pressure: 25 bar, temperature: 150 °C, We are offering this used ITALPRESSE MARK C/ 14-27.5/2 veneer press, year of manufacture 2014. Lhodpfx Aeyxp Twsdtef Machine type: MARK/C 14-27.5/2 Serial number: 184450514 Rated voltage: 400 V Frequency: 50 Hz Year of manufacture: 2014 Single-level through-feed press system with top ram Machine is in perfect working condition Meets CE safety standards The machine can also be purchased together with other machines as part of a complete production line. Heating plate dimensions: 1400 x 2750 mm Number of heating plates: 2 units Number of levels: 1 unit Cylinder stroke: 200 mm Daylight opening: 200 mm Feed side: 1400 mm Specific pressure at 100%: 25 Kg/cm² Total pressing force: 9620 kN Cycle time: 2-30 min Operating temperature: 135°C Max. surface operating temperature: 150°C Intended heating medium: thermal oil Number of press cylinders: 6 units Diameter of press cylinders: 270 mm Return cylinders: 4 units Operating pressure: 290 bar Closing speed: 50 mm/sec Opening speed: 50 mm/sec Operating voltage: 400 V Mould data: External mould dimensions: 1340 x 2540 mm Max. mould weight: 250 kg Mould cover dimensions: 1200 x 2400 mm Moulds are not included in this offer but can be supplied at additional cost Powered infeed roller conveyors: Dimensions: 1400 x 3500 mm Feed speed: 8-40 m/min Light barrier control Electropneumatic shaking device for the upper Mylar film Electronic flatness control Automatic switching to pressing speed Compressed air equipment in the lower press table Cylinder support plates are insulated and drilled from solid material for water cooling Feed speed with frequency control Powered outfeed roller conveyors, dimensions: 1400 x 3500 mm Electrical control cabinet / Siemens S7 PLC control panel Dismantling and collection at buyer’s own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or give us a call.

Condition: good (used), Year of construction: 1990, 1x HOT PRESS for VENEER “SORMEC” TYPE 350X130 Hydraulic hot press for wood, panels, furniture, doors, composites, and various materials Technical data: Platen dimensions: 3500 x 1300 mm Ljdjyv Izbopfx Adtohf 1 USEFUL WORKING PLATE Platen heating by hot water Total pressure: 50 tons Opening: 300 mm 8 cylinders, diameter 85 mm Water boiler not included Overall dimensions: 4500 x 1600 x 2500 mm (H) Weight: approx. 5000 kg Second-hand, in good condition

Condition: excellent (used), functionality: fully functional, shelf length 3500 mm shelf width 1300 mm 8 hydraulic cylinders cylinder diameter 85 mm Lhjdpeyxwzcsfx Adtsf integrated oil heating power supply 380V

Condition: used, pressing force: 65 t, table width: 1,100 mm, table length: 2,200 mm, total length: 2,600 mm, total width: 1,300 mm, total height: 2,000 mm, overall weight: 2,800 kg, empty load weight: 2,800 kg, cylinder diameter: 80 mm, opening width: 300 mm, plate width: 1,100 mm, space requirement height: 2,000 mm, space requirement length: 2,600 mm, space requirement width: 1,300 mm, transport length: 2,600 mm, transport width: 1,300 mm, transport height: 2,000 mm, No. 04486 Veneer press Ott JU 60 Used Heating plates 2200 x 1100 mm LW Plates gold anodized, in very good condition Electric heating 2x 6 kW 4 hydraulic cylinders, diameter 80 mm each Total pressing pressure 65 tons Specific pressing pressure at full capacity 2.7 kg/cm2 Opening width 300 mm Button control for close - open - stop Circumferential emergency stop safety pull cord Transport dimensions approx. 2600 x 1300 x 2000 mm LWH Weight approx. 2800 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Lhjdpfx Adjyfw D Ajtof Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: good (used), Veneer saw, veneer sawing machine, jointing cutting machine, fine cutting machine, fine cutting circular saw -Cutting length: 3000 mm -with extraction Ljdpfx Aeb A Hnhodtohf

Condition: as good as new (ex-display), Year of construction: 2024, new heating plate press, hydraulic ITALPRESSE type XL/6 30-13 with gold anodized plates Touch display control - electric heating plates 3.000 x 1.300 mm - Total pressure 90 to. - Number of heating plates 2 pcs. - Number of shelves 1 pc. - Cylinder stroke 350 mm - Shelf opening 350 mm - Loading from all sides - Number of impression cylinders 6 pcs. - Diameter of pressure cylinders 85 mm - Power requirement of hydraulic unit 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity 22 KW - High-pressure insulating plates - Working temperature 90° C. - max. temperature 120° C. - Operating voltage 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and parallel guides at 2 corners of the press table made of self-lubricating material - Touch screen electronic control unit for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening Ledpfjdx R Tfsx Adtjhf - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnosis and display of fault messages - Safety circuit with two-hand operation - Safety rip cord - Safety bracket for lower pressing table Integrated accessories: - Touch Screen TS/400 - EFC electronic flatness control - Gold anodized heating plates (Busse) Location: From stock 54634 Bitburg - immediately available-

Condition: excellent (used), Year of construction: 2020, New hydraulic heating platen press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control system - Electric heating platens 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating plates: 2 pcs. - Number of levels: 1 - Cylinder stroke: 350 mm - Daylight opening: 350 mm - All-around loading possible - Number of hydraulic cylinders: 6 pcs. - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V, 50 Hz - Safety specifications according to CE standard Standard equipment: - Movement of the press table with rack-and-pinion and parallel guides at 2 corners of the press table made from self-lubricating material - Electronic control unit with touch screen for machine control and monitoring - Digital timer for adjusting pressing time and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for adjusting pressing time - Digital diagnostics and fault display - Safety circuit with two-hand operation - Safety pull cord - Safety support for lower press table Accessories included: - Touch Screen TS/400 - EFC electronic flatness control - Gold-anodized heating plates (Busse) Location: Ex stock Lhodpsxgbxfsfx Adtsf - Immediately available -

Condition: excellent (used), Shelf length 2500 mm Shelf width 1300 mm 4 hydraulic pistons Clearance 400 mm Lodpfjyw H H Ssx Adtshf Water heating

Condition: ready for operation (used), An automatic double clip machine (casing clipper) Alpina/Tipper Tie for single, chain and ring products is available. Caliber range: 20mm-80mm, clipping capacity: 200/min, clip system: double clip, pitch: 12mm/15mm, machine dimensions X/Y/Z: approx. 1600mm/1150mm/2000mm, weight: approx. 500kg. An on-site inspection is possible. Lhedjyf I Ilspfx Adtof

Year of construction: 1999, condition: ready for operation (used), A veneer line Cremona is available. 1) Vertical cutter Cremona, year of manufacture: 1999, working width: 5400mm. Includes lifting device. 2) Dryer Cremona, year of manufacture: 1999, control: Siemens PLC, control year: 2019, working width: 5400mm, vacuum feed width: 5400mm, sections: 6, temperature zones: 2, cooling section: 1. Production capacity: approx. 70 sheets/min. Documentation available. An on-site inspection is possible. Lhsdpfow I E Dvjx Adtsf

Condition: ready for operation (used), A manual clipping machine Tecno Brianza Brevetti Clippatrice H2 is available. Products: sausage products, casing types: natural casings/artificial casings/synthetic casings, clipping capacity: approx. 600pieces/h, machine dimensions X/Y/Z: approx. 1250mm/1000mm/1750mm, weight: approx. 100kg. On-site inspection is possible. Lodpfx Adeyf I Ifetshf

Condition: used, Veneer Press OTT JU 90 -used- ----- Technical Specifications ----- Pressing area: 2,550 x 1,350 mm, Ljdpfxswmmraj Adtjhf Power per heating plate: 9100 W, Number of cylinders: 4

Condition: like new (used), Year of construction: 2021, overall weight: 1,200 kg, total height: 2,200 mm, total length: 2,600 mm, total width: 1,400 mm, power: 2 kW (2.72 HP), For Sale: Brand: GHD Hartmann Model: Hartmann Clip EC 101 IS Clip Machine EC: Easy Clean Year: 09/2021 Suitable for plastic/paper clips. Lhedpfx Adexrf T Dotsf This closing unit features a compact machine frame and its own pulse-controlled drive. It integrates easily with vertical or horizontal packaging machines (bagging machines). Thanks to intermittent operation, it is ideal for manual loading. Synchronization with the upstream filling machine is not required. Bags are discharged via a cross conveyor belt at an angle of 20°, 30°, or optionally 45° and 60°. A built-in vacuum unit at the closing station extracts excess air from the bags for a neat, tight package. The product bags are then clipped and discharged. Option included: HPD printer for printing a date onto the plastic clip. Specifications: - Adjustable speeds - Capacity up to approx. 3,600 units per hour - Product dimensions: Length: up to 400 mm, Width: up to 220 mm, Height: up to 120 mm - Siemens S7-1500 control system - SEW drives - Pneumatics: Festo - Stainless steel safety covers and guides The machine can be inspected and viewed on location. If you have any questions or require further information, please feel free to contact us. Kind regards, Leo Holland

Condition: excellent (used), Year of construction: 2014, Poly Clip PDC 600 Semi-Automatic double clipper Top and PCS Exclusive Features Wide range of applications for calibres up to 90 mm For all plastic, fibrous, collagen and natural casings Upgrade to optional features at any time Ergonomic handle, individually adaptable in length to the operator Perfect positioning above the work table Hygienic design for fast and easy cleaning Why clip with PDC 600? The semi-automatic double-clipper is suitable for all sizes of operations – for small or industrial-scale production runs. The PDC 600 closes fibrous, collagen or natural casing in diameters up to 60 mm, plastic casing up to 90 mm. Using the PDC means that all products – single portions or chains, long sausages, half rings and rings – can be produced efficiently. Manufacturer: Poly Clip Model: PDC 600 Year: 2014 Calibres: Up to 90 mm S-Clip: S 625 / 628 / 632 / 638 Lhedswwi D Hepfx Adtjf Power: 0,1kW / 50-60Hz Machine Dimensions LxWxH: 1.100x780x2.005 mm Machine Weight: 118 kg.

Condition: good (used), Code: 0058 Brand: CASATI MACCHINE Model: Z 1000 - CE Standard Veneer splicing machine - CE Standard Technical data: Arm lenght mm 1000 Veneer thickness mm 0,4-2 Feed speed mt/min 8-18 Total electric power Kw 0,5 Electronic adjustment of the temperature Overall dimensions : mm 1300 x 500 x 1300 h Lhsdpsyg N Enjfx Adtsf Weight kg 200

Condition: good (used), Code: 0599 Brand: KUPER Model: FW 1200 Thread splicer for veneer Lhsdpfxeyg N Dws Adtsf Reach mm 1200 Veneer thickness from 0,3 mm to 3 mm Feed speed from 10 to 50 mt/min Worktop height mm 925 Electrical connection 1,5 Kw Overall dimensions: mm 2150 x 750 x 1650 h Weight kg 425

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total width: 2,400 mm, space requirement length: 9,000 mm, working width: 1,600 mm, Crosswise Veneer Splicing Machine / Cross Splicing Machine Manufacturer: Kuper Model: ACR CrossRunner 1600 Year of manufacture: 2007 Narrow cross splicing machines for pre-glued veneer strips with a small working width. The machine operates significantly faster in cross-feed mode compared to longitudinal machines and is thus an economical alternative, for example, for cross-veneered interior doors or smaller furniture parts. Working width: 1600 mm (along the grain) Lodpfsyayumjx Adtshf Veneer strip width: from approx. 60 mm Veneer thickness: approx. 0.3 - 2.5 mm Feed speed: approx. 30 m/min Suitable glues: PVAc or urea glue With automatic stacking Control: Siemens Simatic with touch display Voltage: 400 V, 50 Hz, 3 Ph Rated current: 16 A Overall dimensions (W x L): approx. 2400 x 9000 mm

Condition: used, Veneer Press BÜRKLE U 80 - used - Ledpfjxfg A Hex Adtjhf Emergency stop cable, Control via push button ----- Technical Data ----- Pressing area: 2,550 x 1,300 mm Power per heating plate: 9,100 W Max. opening height: 4,000 mm Number of cylinders: 6 pcs. Dimensions (LxWxH): 3,150 x 1,450 x 1,785 mm Weight: 3,700 kg

Condition: refurbished (used), functionality: fully functional, Refurbished six-piston hydraulic platen press of Italian manufacture. Branded multi-layer press designed for easy wood veneering, supplied with warranty and service support. Veneering plate dimensions: 3000 x 1300 mm Pressure at full surface: 2.2 kg/cm² Total maximum pressure: 80 tons Number of hydraulic pistons: 6 Teflon MYLAR film on the plates Piped for water-based heating of the plates Option to install a hot water boiler Price includes a fully refurbished machine Lhedpfxovvbbcj Adtsf Price: 10,000 EUR excl. VAT The machine will be refurbished, set up, and tested. The refurbishment status and machine readiness for collection must be confirmed in advance! In stock at Telnice near Brno, Czech Republic Testing, demonstration, and operator training included as standard.

Condition: ready for operation (used), functionality: fully functional, cutting length (max.): 3,550 mm, cutting width (max.): 530 mm, overall weight: 9,000 kg, stroke length: 100 mm, TECHNICAL DETAILS Usable cutting length (as double guillotine): 3,200 mm Usable cutting length (as single plate shear): 3,550 mm Press stroke: 100 mm Press width: 550 mm Min. cutting width: 18 mm Max. cutting width: 530 mm Lodpfx Adsyf Eucetjhf Scrap setting range: 0/50 mm Operating pressure: 6/7 bar MACHINE DETAILS Installed total power: 13.9 kW Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,700 x 1,800 mm Weight: 9,000 kg EQUIPMENT Robust steel construction Blade beam made of cast iron Self-lubricating prismatic guides Adjustable rear support Press for holding the veneer package during cutting Photoelectric cells Electronic programming device Perimeter safety guards

Condition: good (used), Code: 0487 Brand: KUPER Model: 630 Thread splicer for veneer with base Technical data: Throat depth mm 630 Lhjdjxtat Ujpfx Adtjf Thickness of veneers 0,4 - 2 mm Feed speed 7 mt/min Volt 220 single-phase Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95