Used Veneer Slicer for sale (802)

Condition: used, Year of construction: 1987, used, top condition, low hours Manufacturer Bürkle / Joos HP 60 Completely overhauled by Joos in 1987, safety interlock Model S60/250/130 Year of manufacture 1987 Machine no. 63/310777 1 deck Plate size: 2500 x 1300 mm Opening height: 290 mm Tip control Safety cable underneath Electric heating Max. specific pressing pressure 2.5 kg/cm² Bonded aluminium plates Piston diameter: 60 mm Bottom piston & piece Space requirement approx. 3000 x 1500 x 1800 mm Fpodpfjythdpex Aayjl Weight approx. 3000 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery as inspected, in current condition, without warranty or guarantee

Condition: used, Year of construction: 2015, functionality: fully functional, Machines connected in one line (all three machines are only sold together): 1. Veneer cross-jointing machine FURNIMASTER FZR-21 2. Direct unloading device DA-12R 3. Scissor lift INCLUDED Veneer specifications Veneer strip length (grain direction) 350 - 2100 mm Veneer strip width (cross grain) 50 - 500 mm Veneer strip thickness 0,3 - 1,5 mm Power data Maximum nominal output / machine cycles 30 cycles/min. Average production speed 17 - 20 cycles/min. Connection data (Basic machine) Connection power 9 kW Compressed air 6 bar Power consumption Electric energy 6,2 kWh Compressed air 15 NL/min. Dimensions and weight (Basic machine) Length 3500 mm Width 1500 mm Height 1530 mm Working table height 930 mm (+50/-0 mm) Net weight, approx. 2500 kg Fodoy Tpb Repfx Aayepl

Condition: excellent (used), Ott hydraulic veneer press In top condition Fpedpfjzfqzyox Aaysl Pressing area: 3000 x 1350 mm Water-heated veneer press Test run possible at any time.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Very well-maintained and robust OTT heating plate press, type ST 2511/80, with a pressing force of 80 tons. The press is ideally suited for gluing and veneering panels, furniture components, and other wood-based materials. The machine is in very good used condition. Technical data: Fpsdpfx Aaszxzbdsysl Manufacturer: Paul OTT Type: ST 2511/80 Year of manufacture: 1987 Machine no.: A 6815 Pressing area: approx. 2,500 × 1,100 mm Pressing force: 80 t Specific pressing pressure: approx. 2.9 kg/cm² Total power: 15.6 kW Rated voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 24 A Heated press plates Temperature display for upper and lower heating plates Pressure and pressing time setting Safety tripwires Condition: very good Equipment: Upper and lower heating plates Hydraulic pressing device Adjustable pressing pressure Adjustable pressing time Temperature monitoring Safety tripwires Transport possible for an extra charge! The machine is currently still at the customer's site but would be immediately available! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: good (used), Year of construction: 1995, Kuper veneer zig-zag splicer machine, type FW/ 1200-E year of manufacture 1995 S/N 3508 3179 Specific features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely variable width of zig-zag pattern glue thread cutting device max. veneer thickness : 3,0 mm min. veneer thickness : 0,3 mm glue thread with hot air heating Compressed air discus for transporting the veneer over the veneer table control via foot pedal feed speed : 35-60m / min Fodpfxohbp Ifj Aayopl Volt: 400 V, 50 Hz Total power 1,35 kW working height 915mm weight approx. : 440 kg Dimension : 2,12m x 0,73m x 1,55m

Condition: ready for operation (used), functionality: fully functional, plate length 3500mm plate width 1300mm two inserts water heating - needs to be connected to heater 8 hydraulic pistons pistons diameter 85mm Fpedpfx Aoy N Rcneayjl span between plates max 460mm

Condition: good (used), Mono Bun slicer Bun slicer on stainless mobile rack, 1Ph Fpjdpfox H Th Iex Aayol

Condition: excellent (used), Year of construction: 1988, I sell the cross veneer guillotine Josting QFS 800. Year 1988 (2pcs. available on stock). Cutting length 800mm. Fsdpfxeyc Nils Aayopl Cutting height 60mm. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, plate length 3500mm plate width 1300mm solid steel plates oil heating with included heater Fpjdpfx Aajzxp Swjyel 8 hydraulic pistons pistons diameter 85mm total pressure 160 tons safety line switch year 2002

Condition: used, Year of construction: 1999, Max. cutting length: 4200 mm Max. cutting height: 45 mm Max. cutting depth: 515 mm Saw blade diameter: 180 mm Clamping beam movement: pneumatic Fencing system: Fence indicator: Fsdpezvzicofx Aayepl Dust extraction channel: Yes Dust extraction: external dust extraction Feed type: manual Dadoing unit: with diamond-tipped saw blade (secondary cut) Machine type: stationary Weight approx.: 950 kg Dimensions: 5400 x 1180 x 160 mm Motor power: 2.2 kW Dust extraction diameter: 80 mm Storage location: Nattheim

Condition: excellent (used), Year of construction: 1967, I sell the veneer guillotine Josting PFS 2100. Year 1963 and 1967 (2pcs. available on stock). Cutting length 2100mm. Cutting height 60mm. Cutting width 20-680mm. Very good condition. Available immediately. Fpsdjyc Nh Uspfx Aayel

Condition: excellent (used), functionality: fully functional, cutting length (max.): 3,000 mm, type of input current: three-phase, saw blade diameter: 160 mm, total width: 1,000 mm, total length: 4,600 mm, total height: 1,400 mm, TOMESANI veneer saw with scorer 3.0 m Specification: • Condition – after comprehensive inspection, fully operational Fsdpfx Aoxb Dyzoayepl • Manufacturer – TOMESANI • Maximum working length of cut element – 300 cm • Main blade motor (160 mm diameter) – 2.2 HP • Scoring unit motor (100 mm diameter) – 0.17 HP • Pneumatic hold-down for the cut veneer • Integrated dust extraction system with built-in fan • Overall dimensions – 460 x 100 x 140 cm (L x W x H) Additional information: • The machine is in very good technical condition, ready for immediate use • The photos show the actual condition of the item for sale • Possibility to power up and test the device on site

Condition: excellent (used), functionality: fully functional, We offer the GROTE MODEL SS-2 sector slicer, designed for efficient cutting of products into halves or quarters before further slicing. This is a specialized machine designed for manufacturers of pizza, ready meals, cold cuts, and snacks who want to automate an additional stage of raw material preparation, increase line efficiency, and improve product quality and yield. The SS-2 sector slicer cuts products lengthwise into 1/2 or 1/4, preparing them for further slicing into slices, cubes, or shreds. It works perfectly with Grote 613 bulk cutting equipment and slicers/applicators that apply slices directly to pizza bases or trays with high weight accuracy. Applications for the GROTE SS-2 sector slicer Splitting pepperoni, sausage, and ham into halves or quarters before slicing Preparing raw materials for pizza, sandwich, salad, and prepared food lines Automating an additional step in the process—less manual cutting, greater consistency Fsdpfx Asyibhdoayspl Key advantages of the GROTE MODEL SS-2 High performance – cutting up to 500 pieces per hour, ideal for continuous production. Wide range of products – can cut products with a diameter of 1 to 5 inches, from thin pepperoni to thicker ham or salami sticks. Express cycle – simply load the product and the slicer cuts it in approx. 2 seconds into equal halves or quarters. Intact core of the pieces – the pieces remain stable, easy to handle and separate easily during the next cutting stage. Hygienic, industrial design – made of stainless steel, with quick-release parts and easy access to all working areas for fast and thorough cleaning. Technical data: Manufacturer: GROTE Model: SS-2 Type: sector slicer Country of manufacture: USA Function: dividing products into halves or quarters Capacity: up to 500 pieces/hour Product diameter range: 1–5 inches

Condition: good (used), functionality: fully functional, I am selling a Scheer FM 2-30000 joining and precision cutting machine from my carpentry workshop. The machine is still in good condition but is no longer being used. That is why I am selling it. The machine can be inspected and tested on site in Stuttgart. Fjdpoztgnlofx Aayspl

Condition: excellent (used), Year of construction: 2018, 484 USED MHS Professional bread slicer with circular blade. EXTERNAL DIMENSIONS (in cm): - W: 300 - L: 89 - H: 114 TECHNICAL DATA: - year of production: 2018 - power: 2.5 kW - power supply: 400V 50-60Hz - maximum bread length: 72 cm Fedpfx Ajzq Sx Djayepl - adjustable slice thickness: 4–30 mm - capacity: 80–200 slices/min The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: not inspected (used), functionality: unexamined, 5 kW 20 press cylinders 3 press cylinders individually with foot valve Fodpfjx Hiqrsx Aayepl Each set of 5 cylinders individually disconnectable with hand valve Assembly machine - cutting length: 9300 mm Total height: 2100 mm Pressing height: 1300 mm Extraction port: 120 mm

Condition: good (used), Year of construction: 1987, Veneer saw with planer unit, connectable with reversible knife planer head. Max. cutting length 3005 mm. With rear finger stop and scale. Fpodpfxow U D U Hj Aayjl

Condition: used, with new Mylar film used, in good condition Fpodpfx Aasww Nd Hoyel Brand: Joos Year of manufacture: 1981 Machine no.: 81/10621 1 level GS certified Plate size approx. 2550 mm x 1350 mm Opening width approx. 400 mm Tip control Swivel control panel Lower safety bar Side guide Electric heating Max. pressing force 90 t Aluminium plates Piston diameter 80 mm Required space approx. 3000 mm x 1600 mm x 2100 mm Weight approx. 3000 kg Total connected heating load 20 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Condition: good (used), Code: 0421 Brand: ORMAMACCHINE Model: NPC - CE Standard Hot press with diathermic oil heating for wood, joinery, furniture, custom-made furniture, panels, doors, composite materials and various – CE Standard Platen sizes mm 3000 x 1580 Solid steel platens with diathermic oil heating N° 6 pistons diameter 85 Opening mm 400 Fpjdpfx Aszgtpijayol Platens heating by electric boiler Thrust 120 ton Guides side racks Mylar-coated platens Overall dimensions mm 3700 x 1850 x 2600 h

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Complete Slicing & packing line from CFS & Variovac! CFS-Uni slicer whit check controller / Scale year of construction 2006 updated firmware whit touch display. Fsdpfxoxmh Rbs Aayopl Variovac Multipower year of construction 2008 built in vacuum pump + booster pump foil wide 542 mm, Rejection 430 mm, MAP machine, ELS Labeling system! Very nice and well maintained line ready to work!

Condition: ready for operation (used), Year of construction: 1994, Ott 2513 Stabil Veneer Press 4 cylinders Pressing area 2500 x 1300 mm Electric heating Electric opening and closing Pressing force 90 tons Fjdpfxex Dzvxo Aayepl Year of manufacture 1994 Price 7,500.-

Condition: excellent (used), Year of construction: 2017, 407 USED Treif Bread Slicer. TECHNICAL DATA: - 380V power supply. EXTERNAL DIMENSIONS (in cm): - height 112 cm Fedpezf N A Nsfx Aayopl - width 90 cm - length 80 cm.

Condition: excellent (used), functionality: fully functional, Shelf length 3500 mm Fpsdpfx Aaozyaipeyjl Shelf width 1300 mm New aluminium shelves 6 hydraulic cylinders Piston diameter 70 mm Water heating Ground clearance 390 mm Safety rupture link Year 1999 Weight 4400 kg

Condition: excellent (used), Catalogue number: 7551 TECHNICAL DATA Veneer thickness: 0.4-2mm Fedpfxsztwhpo Aayopl Passage width under body: 920mm Foot pedal control Table dimensions: 1250x340mm 2 metal pressure rollers Air requirement: 6 bar Bottom-driven rubber roller 2 smooth, metal drive rollers Motor: 0.55kW Dimensions (L/W/H): 1400x550x1500mm Weight: 205kg – German production – Unpainted – DTR documentation – Very good condition – Used stitching machine Net price: 6900 PLN Net price: 1640 EUR, depending on the exchange rate 4.2 EUR (Prices may vary with greater fluctuations)

Condition: good (used), Code: 0240 Brand: KUPER Model: FW /J 900 Veneer thread splicer Technical data : Throat depth mm 900 Fpsdpfx Aoyxmrwoayel Feed speed mt 15/min Thickness of veneer 0,4 - 2 mm Motor 0,18 Kw Overall dimensions: mm 1350 x 580 x 1600 h Weight kg 300