Used Veneers Process for sale (21,440)

Condition: used, Year of construction: 2010, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 2010, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Bsdpfx Aiov Sthgewoww Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: ready for operation (used), functionality: fully functional, The Wolfking TSMIG 850 grinder-mixer is a versatile machine designed to meet the needs of the meat processing industry. Thanks to its dual grinding and mixing function, it ensures homogeneous and consistent processing, even at low temperatures. Indeed, this grinder is equipped with robust paddles that ensure optimal distribution of the ingredients, resulting in a perfect texture for each production batch. Furthermore, this machine is ideal for companies looking to maximize their output and improve the efficiency of their production line. With its robustness and ease of maintenance, the grinder-mixer easily integrates into demanding industrial environments while ensuring high long-term reliability. Bjdezqdw Sepfx Aiwoww In summary, the Wolfking TSMIG 850 is an essential choice for professionals seeking to optimize their meat production processes, while ensuring better management of raw materials and increased productivity. Specifications: TSMIG 850/225 Mixer Paddle mixer Weight: 1800 kg Power: 41 kW Amperage: 71 A Voltage: 3*400 V Frequency: 50 Hz Dimensions (L x W x H): 1900 x 1900 x 2650 mm IP.65 5XWFPSKX

Condition: ready for operation (used), functionality: fully functional, The Multivac C500 vacuum packaging machine packages food products in vacuum bags. Its dual-chamber design allows the operator to load one chamber while the second chamber completes the packaging cycle. This setup improves workflow continuity and reduces waiting times between cycles. The machine is suitable for meat processing plants, delicatessen shops, cheese factories, industrial kitchens, and manufacturers of ready meals. It can package fresh or processed meat cuts, processed meat products, cheeses, prepared dishes, and other products compatible with bag packaging. How does the Multivac C500 work? The operator places the product in a bag and then positions the opening on the sealing bar. They then move the tilting lid towards the loaded chamber. The pump removes the air from the bag and the chamber. When the machine reaches the programmed vacuum level, it seals the bag before gradually reintroducing air into the chamber. This process limits the amount of oxygen around the product, protecting the food from oxidation, dehydration, and external contamination. It also facilitates storage, ripening, transport, and the organization of the various production stages. However, the shelf life depends on the product, the bag, the temperature, and the hygiene regulations applied by the user. Dual chamber and bag sealing The C500 has two chambers and a moving lid. This configuration allows for quick alternation between the two work areas. The MULTIVAC documentation also indicates two sealing bars of 650 mm per chamber. Bjdpszpwk Njfx Aiwjww The manufacturer offers several sealing systems depending on the configuration: single sealing, double sealing, or sealing with trimming of the bag excess. The machine presented should therefore be visually inspected to precisely identify the installed system. Similarly, the vacuum pump plate will confirm its model and actual capacity. Integration into a packaging line The Multivac C500 vacuum packaging machine can operate as a stand-alone machine. It can also be integrated into a line including preparation tables, conveyors, a shrink tank, or a labeling area. Vacuum packaging helps manufacturers standardize their packaging and better protect products between production and shipment. For shrink bags, a shrink tank can complement the machine to tighten the film around the product. MULTIVAC also offers several accessories to facilitate filling and handling of the bags. Technical specifications: Manufacturer and model: MULTIVAC C500 Year and machine number: 1998 – 083 Configuration: dual chamber with two sealing bars of 650 mm per chamber Power supply: 400 V – 3 phases – 50 Hz Power and current: 8.5 kW – 24 A QJ0DB9K7

Condition: good (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 781921, For sale is a used mixer (paddle mixer) with a lifting tipper for standard trolleys from April 2022, in very good condition. This mixer was used for approximately 10 hours in April 2022 and has not been used since. The manufacturer is Laikidis from Greece, and the machine was purchased from Barsso in Belgium. Dimensions are visible in the pictures. All certificates, wiring diagrams, and operating manuals will be provided upon request. All pictures were taken upon delivery of the machine; the current condition shows minimal signs of use. Bsdpjyvrabofx Aiwjww

Condition: excellent (used), Direct from meat free factory. Vacuum filler in good condition. Complete with tote bin loader. Bwjdpsyzax Nefx Aiwew

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Base machine 555 - Machining dimensions for contour milling: - X = 3514 mm - Y = 1544 mm - Maximum machining dimensions: - X = 3868 mm - Y = 1746 mm - Z = 325 mm - Workpiece support with 8 brackets, pneumatically clamped - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 in the X-axis and 6 in the Y-axis - available individually - T-shaped layout - max. drilling diameter 35 mm (depending on panel thickness) - Spindle extension stroke: 70 mm - Direction of rotation: alternating clockwise and anti-clockwise - n = 4725 rpm, infinitely variable - 2 horizontal drilling units in the X-direction, 1 horizontal drilling unit in the Y-direction - Sawing unit 7946: - Motor: 3.5 kW - 90° pneumatically swivelling - n = 5300 rpm - Tool holder A Ø = 200 mm, I Ø = 30 mm, B = max. 3.5 mm - Sawing/grooving in the X and Y directions - Milling unit 7935: - with 6 kW spindle, water-cooled - Milling unit 7982: - for lock case milling - Tool changer 7996: - 18-position magazine (turret) - Vacuum pump with a capacity of 140 m³/h - Handheld control unit - PC control system with TwinCAM WOP system Bsdpfx Aiozk N Hlswoww - Siemens control system Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1999, Used Machine Bjdpfxszlbtyj Aiwjww Year of Manufacture: 1999 Features and Technical Specifications: - For cutting all types of veneer - Tight joints and tear-free - Cutting length: 3020 mm - Opening height: 60 mm - Cutting height: 45 mm - Motor: 1.8 kW - Saw blade speed: 8700 rpm - Saw blade diameter: 180 x 16 mm - Includes a planing unit that can be coupled with or decoupled from the sawing unit - Horizontally and vertically adjustable - Joining blade head 85 x 50 mm, with 4 reversible blades - Front support table is adjustable (ball-bush guide) - With front support table and dust duct - Sliding stop from the front via position indicator - Veneer clamping via pressure beam using two external pneumatic cylinders - Rear support table with recessed measuring tapes and stop rail - Dimensions: 4780 x 1560 x 1290 mm - Weight: 520 kg Availability: Immediate Location: 63934 Röllbach

Condition: used, Fish Filleting and Heading Machine Make: VMK Model: 18 + 181 Bwjdpfozi Tl Nsx Aiwsw With spare parts Working order, as back from factory

Condition: excellent (used), Year of construction: 2016, operating hours: 879 h, functionality: fully functional, Rex vacuum Filler for sausage linking Model RVF 327S Year 2016 Operating hours 879 With 18 mm linking nozzle Holding device for casings Bwodpfjzu Ncbjx Aiwew Automatic Linking gearbox In excellent working condition

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Technical Specifications: Manufacturer: Thompson Meat Machinery. Model: 4200 M/M single-shaft mixer grinder. Serial Number: TMG.4200.259. Date of manufacture: 2002. Output capacity - up to 4,000 kg/h (depending on product). Bwjdszuzl Ujpfx Aiwew Hopper capacity - 390 litres. Mix capacity - up to 200 kg. Head size - #56. Supplied with various hole plates and other spare parts. Motors: Voltage (V): 415 V (for all motors). Frequency (Hz): 50 Hz (for all motors). Total Ampage: 35.8 A.

Condition: used, Year of construction: 2006, - Max. cutting length: 2600 mm - Cutting widths: 45 - 350 mm - Opening of the pressure bar: 100 mm - Width of the pressure bar: 350 mm - Parallel stop with digital display: 25 - 1000 mm - Cutting angle approx.: 45 Veneer shears Manufacturer: Monguzzi, Carugate Type: AFD-35/2600 Year of manufacture: 2006 For clean, perfectly parallel and right-angled joining of veneer bundles in a single operation. Thanks to its high productivity, gentle handling of the raw material (no manual turning) and its precisely parallel cut, this guillotine is the perfect machine for preparing veneer strips for splicing. Production Up to 3 bundles/min Technical data Max. cutting length: 2600 mm Cutting widths: 45 - 350 mm Opening of the pressure bar: 100 mm Bodpfxjzuzpmj Aiwsww Width of the pressure bar: 350 mm Parallel stop with digital display: 25 - 1000 mm Cutting angle approx.: 45 Features - Solid, robust construction with generously sized pressure bar and cutting table to accommodate the high clamping and shearing forces - Unique system with a fixed, solid cutting table and a movable pressure bar - Laser lights for precise visual identification of the cutting lines - High-quality hydraulic system with a large oil tank - Electrically driven parallel stop with quick adjustment - Industrial computer based on Windows, widescreen monitor and keyboard - Various operating modes and storable program sequences - Extensive recording of production data - Central lubrication unit Movable laser lines For optimizing veneer yield. The manually operated laser line for the position of the front knife can be quickly adjusted. The veneer width is transmitted to the computer at the touch of a button. The cutting process then starts automatically. Note: The technical data and descriptions are a transcript of the order confirmation from that time. Data is for informational purposes only and is not binding.

Condition: new, CNC machine Manufacturer: Comec Type: MD JAMB New machine 3 machining supports for cutting to miter angles, milling recesses for corner connectors, and door lock plates. A complete door frame element with decorative trim and rabbet trim is machined in a single clamping operation. This allows a complete door frame to be machined in approximately 2.5 to 3 minutes. The machining equipment can be individually adapted to customer requirements. Bwodpjzvfl Iefx Aiwjw Quick search Offer machines Sign up for newsletter Unsubscribe from newsletter Contact us Overview

Condition: excellent (used), Year of construction: 2018, Veneer press, OMC Type PL 105 30/13 Year of manufacture: 2018 Dimensions: 3000 x 1300 Piston diameter: 6 x 85 Bwodpfx Aiszx Sh Uowsw 3.2 kg/cm2 Weight: approx. 3300 kg

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: Travel ranges: - X-axis: 2,685 mm – Y-axis: 1,095 mm – Z-axis: 140 mm Bwodpfx Aiozk Nu Nswjw Milling unit: - 6 kW, water-cooled - Tool holder HSK 63 F – Speed 1,000 – 18,000 rpm Tool changer: 6-position, side-mounted Drilling head: - 9 vertical drilling spindles in 32 mm increments - Horizontal drilling spindle: 1+1 - Vertical drilling spindle: 1+1 Groove saw in the X-direction Control system: Twin CAM 32 Vacuum pump 100 m³/h Including vacuum suction cups Dimensions: 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach

Condition: used, Second-hand machine Second-hand veneer saw from Scheer, model FM 2 - 3000 Clamping via hand-operated wheel Integrated extraction system Cutting length: 3000 mm movable Availability: at short notice Bjdpfxozk N Ezj Aiwjww Location: Röllbach

Condition: used, Year of construction: 1972, Second-hand machine Year of manufacture: 1972 Features and technical specifications: Bwsdpozk N U Njfx Aiwjw - Pressing surface 2500 x 1100 mm - Total pressing force: 650 kN - Opening width: 400 mm - Number/diameter of cylinders: 4/80 mm - Operating pressure: 325 bar - Closing time: approx. 16 sec. - Panel type: aluminium / natural - Thickness: approx. 51 mm - Power rating per heating plate: approx. 6.8 kW - Heating-up time to 90°C: approx. 16 mins. - Dimensions: 2900 x 1300 x 2050 mm - Weight: approx. 2,900 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2019, Holz-Her Dynestic 7532 10.5 automatic CNC nesting machining center with Holz-Her Store-Master 5110 panel storage system Used machine Year of manufacture: 2019 Features and Technical Specifications: - Designed for classic nesting machining with a wear plate - Welded machine frame with ground and hardened prismatic guides for the traveling column, toolhead, and consoles - Gantry-style moving column - Rack-and-pinion drive, helical teeth, in the X and Y directions; ball screws in the Z direction for precise positioning - Machining dimensions: - Max. support area on nesting table: X = 3100 mm Y = 1560 mm - Max. travel ranges: X = 4695 mm Y = 2100 mm Z = 293 mm - Max. clearance height of DYNESTIC table Z = 100 mm from top edge of table (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC table: - Rigid, continuous machining table with grid markings - continuous slots in the X and Y directions - Slot spacing: 50 mm - Includes 25 meters of sealing cord for securing the wear plate - Vacuum fields: 1-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - individually controllable - U-shaped arrangement - 5 in the X direction and 4 in the Y direction - 32 mm pitch - Max. drill bit diameter: 35 mm - Total drill length: 70 mm from the mounting end (depending on plate thickness) - Spindle extension stroke: 70 mm - Rotation direction: Alternating clockwise and counterclockwise - n(max): 1,000–4,400 rpm, continuously adjustable - Mounting: M10 thread – 11 mm interference fit - Tool-free, without mounting - 6 horizontal spindles: - 2 dual-spindle units in the X direction - 1 dual-spindle unit in the Y direction - Mounting: M 10 thread, 11 mm interference fit - Total drill length: max. 63 mm from mounting end - Tool-free, without chuck - Milling unit 7842: - Power: 12.0 kW (S6) - n(max) = 1,000–24,000 rpm, continuously variable - Max. power at 12,000 rpm to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck with HSK shank - Ceramic ball bearings (hybrid bearings) - Max. tool weight: 6 kg (including holder) - Tools: Milling and grinding tools, max. Ø 160 mm - Safety guarding in accordance with CE standards - Protective guard on the sides and rear - Vacuum pump: 500 m³/h, dry-running - Operator safety via light curtains in the front area of the machine - Handheld control unit for remote control of the machine with the following functions: - Start/Stop of the machining program - Speed control of the machining cycles - Reset button - Manual feed/rapid traverse for all axes - Emergency stop - CAMPUS V7 CAD/CAM software (1 machine license) consisting of: - CAMPUS NC-HOPS: - Graphical variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic centralized lubrication - Automatic lubrication according to defined lubrication intervals - Additional dust sealing via positive pressure in each guide carriage Bodpfx Aijzlbrpswjww - Simultaneous lubrication: - for all linear guides in the X, Y, and Z directions - for all ball screws in the Y and Z directions - for all milling s...

Condition: used, Year of construction: 2010, machine/vehicle number: 2067, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: AC, total height: 2,000 mm, total length: 1,500 mm, total width: 2,000 mm, overall weight: 750 kg, Equipment: CE marking, documentation/manual, TARTLER NODOPUR VS-AR-2K – 2-Component Metering and Mixing System – Year of Manufacture 2010 – For sale is a used 2-component metering and mixing system, TARTLER NODOPUR VS-AR-2K. It was used in an industrial setting and shows corresponding signs of wear. Technical data: • Manufacturer: Ing. Büro Tartler GmbH / TARTLER • Type: NODOPUR VS-AR-2K • Machine No.: 2067 • Year of Manufacture: 2010 • Operating Voltage: 400 V AC • Frequency / Current Consumption: 50 Hz / 20 A • Power according to nameplate: 6.5 kW • Operating Pressure according to nameplate: 6–8 • Dimensions: approx. 1,500 × 2,000 × 2,000 mm incl. refill system • Weight: approx. 750 kg, depending on the equipment Control / Drive • Siemens PLC / SIMATIC Panel MP377 • Frequency Inverter A/B: Lenze, 1.50 kW • Drive Motor A/B: 1.50 kW • Mixing Head Type: LC 6/3 • Electric Motor Mixing Head: Emod, 1.1 kW Metering Technology Component A • Metering Pump: KTS 32 • Delivery Volume: 32 cm³ / 30 ccm/stroke • Volumetric Meter: VSI 0.1/16 EPC S4V Component B • Metering Pump: FPN 16.0 • Delivery Volume: 16 cm³ / 16 ccm/stroke • Volumetric Meter: VSI 0.2/16 EPO 12 V Containers / Material Supply • 1 × Stainless Steel Container A, approx. 60 liters • 1 × Stainless Steel Container B, approx. 60 liters • Containers with Mini-/Maxi-Level Monitoring • Container Pre-Pressurization • Silica Gel Filter • Container Agitator • Automatic Refill from 200-Liter Containers • Diaphragm Pumps for Component A and B Hose Assembly • Component A: approx. 6.12 m / DN 16 • Component B: approx. 6.42 m / DN 10 Equipment: The equipment includes, among other things: • Metering and mixing system for two components • Mixing head • Siemens control panel • Metering pumps A and B • Volume flow measurement • Stainless steel material containers • Agitators • Automatic refill system • Diaphragm pumps • Hose package • Signal light / Traffic light • Control cabinet • Various sensors and pressure regulators Condition: The system is in used condition. Age- and use-related signs of wear as well as material residues are present. The optical condition can be clearly seen in the current photos. An inspection of the system is possible after prior appointment. A function test can also be carried out after consultation. Bwodpfx Aozvmihjiwew Sale: Price: €17,500 (negotiable) plus VAT. Inspection and collection by appointment. Sale preferably to commercial businesses. If you are interested or have technical questions, we will be happy to send you further pictures and information.

Condition: used, Year of construction: 2011, Edge processing line HOMAG, consisting of: - Infeed system for longitudinal and transverse parts - One HOMAG edge banding machine with LASER GLUING - Transfer station for longitudinal and transverse output - Return conveyor for automatic circulation Pos. 1 Vacuum infeed system TBP 410 Max. workpiece size 2,800 x 1,200 x 40 mm Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees Pos. 2 Single-sided laser edge banding machine HOMAG KFL610/21/PU/L/25/SI14 For automatic 4-sided processing in 4 passes With SI 14 feeding system for automatic feeding of longitudinal and transverse parts Equipment: - Release agent application top and bottom - Trimming cutters 4.5 KW / Double-trimming cutter 2 x 6.6 KW - Stepless axis adjustment vertical and horizontal - Mortising unit 2 x 4 KW - LASERTAC activation unit 3 KW / optionally PU gluing - Max. edge thickness 3 mm - 24-position roller magazine with servo-controlled edge feeding - Release agent spray device top/bottom - Trimming unit bevel/straight HL 84 / 0.8 KW with 2 motors - Pre-milling unit with 2 motors, each 1.5 KW (pneumatically adjustable to 2 positions) - Release agent spray device top - Profile milling unit FK 23 with 2x8-position tool changer for 20 cycles/minute - Multi-scraper unit MN 21 automatic - Finishing unit FA 11 top/bottom (flat scraper and buffing unit) - Milling unit with 6.6 KW motor, pivotable 90 degrees, stepless axis adjustment vertical and horizontal. With HSK 63 F tool holder - Machine is designed for tool changes in the gap Pos. 3 Workpiece return with chain lifting buffer To decouple processing machines by temporarily buffering. Bwsdpszvmx Asfx Aiwow Return via approx. 6 belt conveyors Pos. 4 Vacuum transfer device TBP 410 Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees

Condition: ready for operation (used), functionality: fully functional, The MADO MEW 723 mixing grinder combines mixing and chopping in a single machine. MADO officially classifies it as one of its automatic mixing grinders. It is designed for industrial butcher shops, meat processing plants, and meat processing workshops. It can be used to prepare chopped products, fillings, seasoned mixtures, or bases for sausage production. Its 120-liter hopper is suitable for professional production while minimizing transfers between two separate pieces of equipment. Operation of the MADO MEW 723 The mixing device distributes the pieces of meat, spices, and other ingredients before they pass through the cutting system. The central arm has four mixing profiles. Then, the screw conveyor regularly directs the product towards the cutting system. Depending on the configuration, the manufacturer offers, among other options, a five-piece Unger B98 system or an Enterprise size 32 system. Unger D114, E130, or Enterprise E52 systems can also be used in some versions. Therefore, the exact configuration of this machine must be visually confirmed before announcing its cutting system. This arrangement improves the consistency of the recipes and reduces intermediate handling. The operator can thus prepare a uniform mixture before packaging, portioning, stuffing, or shaping. According to the manufacturer, the MEW 723 can also process large pieces and materials that have been hardened by cold. However, the actual permissible temperature depends on the installed equipment and the nature of the product. Therefore, the machine is suitable for lines where the consistency of the mixing and particle size directly influences the final quality. Cleaning and integration into a line The stainless steel frame meets the common requirements of the food processing environment. The manufacturer also provides a reversing function, a rinsing chamber, a removable mixing device, and a removable cutting body. These elements facilitate access to the work areas, cleaning, and maintenance operations. A screw extraction tool is also indicated in the model's documentation. Consequently, teams can more easily organize production changes and maintenance operations. The MADO MEW 723 mixing grinder can be placed after the cutting or preparation of the raw materials. Subsequently, it can feed a stuffer, a former, a portioning machine, or a packaging line. This integration reduces manual steps, improves production continuity, and promotes more consistent quality. However, options such as integrated cooling, a cartilage and nerve separator, a frequency inverter, or a reinforced drive should only be mentioned if their presence is confirmed on the machine. Bwjdpfx Aiezpwftjwsw This machine has been reconditioned by Europ'Équipement. Each machine is inspected, cleaned, checked, and tested before being sold to offer a reliable, economical, and durable solution for professionals in the food processing industry. Technical specifications: Manufacturer and model: MADO MEW 723 Year and serial number: 2014 – 20002802 Hopper volume: 120 liters Power supply: 400 V – three-phase – 50 Hz Power, current, and protection: 6.6 kW – 14.6 A – IP54 – CE DQI3QCEH

Condition: good (used), Year of construction: 1989, operating hours: 24,048 h, Brand: Hans Weber Maschinenfabrik GmbH Type: DS 8.7 Bedozuk Hbspfx Aiwoww Serial number: DS 85 777 Type: Double screw extruder Year of manufacture: 1989 Operating hours: 24,048 h Screw diameter: 87 mm Connected load: 90 kW

Condition: used, Handtmann VF 610 Vacuum Filler The Handtmann VF 610 vacuum filler is the ideal solution for the precise filling, portioning, and linking of food products. These filling machines are widely used in various industries, including bakeries, butcher shops, convenience food, snacks, salads, cheese, fruit and vegetables, processed meat products, fish, vegan and vegetarian products, baby food, and pet food. The fillers are robustly constructed and comply with the strictest standards and requirements applicable in the modern food processing industry. Thanks to the intuitive touchscreen control, different programs can be easily set. The filler can be equipped with various auxiliary machines, including clippers, forming machines, and diaphragms. This filling machine is entirely made of stainless steel. Technical specifications: - Production capacity: 3,000 kg/h - Functions: filling, portioning, linking - Portion size: 5 g – 100,000 g - Number of portions: up to 450 portions/min - Filling pressure: 50 bar - Hopper capacity: 40 L / 100 L - Integrated vacuum system: Busch 16 m³/h - Equipped with: linking mechanism (34-5) - Voltage: 400 V (3 + N, 50 Hz) - Power: 3.5 kW - Year of manufacture: 2005 Bwodpfx Aszwlwgoiwow - Weight: 480 kg - Machine dimensions (W x D x H): 1,070 x 950 x 1,750 mm

Condition: used, Year of construction: 1995, functionality: fully functional, total length: 3,400 mm, total width: 1,650 mm, total height: 2,550 mm, overall weight: 6,000 kg, Equipment: CE marking, ORMA NPC 6/100 Veneer Press Shelf length: 2500 mm Shelf width: 1300 mm Number of loading cycles: 3 Automatic pressure increase Safety cable (“breakaway” cable) Hydraulic press with heating via water from the central heating system Working pressure: 350 bar Bwodpoz Nvd Tsfx Aiwew Press with 6 cylinders Cylinder diameter: 85 mm CE certified Machine dimensions: 340x165x255 cm (H) Machine weight: 6000 kg

Condition: refurbished (used), Maja ESM 435 – completely overhauled and immediately ready for use The machine has been completely overhauled by us. During this process, all bearings were replaced, electrical components were exchanged, and a new power supply line was installed. The Maja ESM 435 impresses with its compact design and simultaneously large working area. It delivers very good results in terms of scaling, is easy to operate, and runs extremely quietly. This machine is particularly interesting for direct marketers, agricultural businesses with their own slaughtering facilities, and smaller butcher shops. Why choose a used machine from Amfotech? We are not a typical used machine dealer, but rather come from a technical service background. Therefore, each machine with us is: Bjdpfx Asz Ah Sdsiwsww * disassembled and thoroughly inspected * technically completely reviewed * equipped with new wear parts * provided with new electrical components if necessary * delivered with a one-year warranty on used machines This way, you don't receive a machine that has simply been cleaned, but a technically overhauled machine that you can rely on in daily use. If you are interested or have any questions about the Maja ESM 435, please feel free to contact us directly.

Condition: used, Band Saw Kolbe K430 The Kolbe K430 band saw is widely used not only in the meat processing industry, but also in slaughterhouses, and in the processing of poultry, fish, vegetables, fruits, vegan, vegetarian, baby food, and pet food. This model is ideal for cutting large quantities of meat, poultry, fish, vegetables, and fruit. It is suitable for processing both fresh and frozen products, including frozen blocks. The machine is equipped with safety sensors on both doors, which automatically stop the machine when either door is opened. The motor features an electric brake for enhanced operator safety. Its hygienic design allows for quick and easy cleaning, reducing downtime and saving valuable production time. The band saw is fitted with a mobile table with an adjustable portioning guide, allowing the cutting width to be adjusted continuously. The entire machine is constructed from high-quality stainless steel, ensuring durability and compliance with food industry hygiene standards. Specifications: - Cutting height: 403 mm - Cutting width: 412 mm - Working height: 880 mm - Equipped with an adjustable portioning guide - Voltage: 400 V (3 + N, 50 Hz) - Power: 2.9 kW Bjdezrf Aljpfx Aiwjww - Weight: 305 kg Year of manufacture: 2015 Machine dimensions (W × D × H): 1,018 × 1,010 × 1,970 mm