Used Wiring Diagrams for sale (3,293)

Condition: used, machine/vehicle number: ZCFA75B020248xxxx, mileage: 401,000 km, Year of construction: 2006, Please contact ATS Norway for more information Hnjdowi Ryaspfx Addeg Please provide reference number upon request: 20395 Specifications: Km: Approx. 401,000 Transmission: Manual Tires (see pictures) 4x2 Winch Length of plane: Approx. 4.8 m 150 hp Palfinger PK5200 crane from 1991 Crane diagram 3 seats Radio/CD Air conditioning/AC Service is done by owner Ready for delivery Description:Iveco 75E15 crane truck with winch.The truck is EU approved and from 2006.5.2 t/m Palfinger crane from 1991. Km: 401000 HK: 149 Technical approved: Yes EU-approved until: 11.02.2026 Own weight: 5530 Total Weight: 7490 Payload: 1885 Width: 245 Length: 798 Euro: 3 Gearbox: Manual

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 300 kg, input voltage: 400 V, input frequency: 50 Hz, HOFFMANN FILTER FLEECE SYSTEM WITH REEL TYPE: HYDROSTAT HN0.6 MACHINE NO.: 0405364 YEAR OF MANUFACTURE: 2004 Technical Data: Operating Voltage: 400 V, 50 Hz Footprint incl. sludge tank: approx. 2055 x 1560 mm Filter area: 0.6 m² Filtration capacity (based on emulsion): approx. 165 l/min Inlet height: 488 mm Paint finish: RAL 9002, textured lacquer Weight: 300 kg Equipment: - Made of sheet steel, fully welded, base dimensions approx. 1500 x 1500 x 280 mm Filling capacity: approx. 460 l - 1 gear motor - 1 reel for winding up used filter fleece Hnedpfx Adox T Ah Dsdog - 1 reel-disposal switch with “reel full” indicator - 1 coolant level switch - 2 pump mounts for user-supplied service pumps - 1 roll of filter fleece, width 1000 mm - 1 sludge tank - 1 complete electrical control system in a dustproof control cabinet with all switching, control, and monitoring devices, motor protection switches for each drive, control transformer, function indicator lamps, filter system wiring according to VDE 0113 - Documentation, 2 copies, German - EC Declaration of Conformity 98/37, Annex IIB

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, number of axes: 5, This 5-axis Mitsubishi MV2400 S wire EDM machine was manufactured in 2016. It features a 600 mm X-axis travel, 400 mm Y-axis travel, and 310 mm Z-axis travel. Capable of handling workpieces up to 1500 kg, it offers dimensions up to 1050 mm in length and 820 mm in width. Consider the opportunity to buy this Mitsubishi MV2400 S wire EDM machine. Contact us for more information. • Maximum workpiece length: 1050 mm • Maximum workpiece width: 820 mm • Maximum workpiece height: 305 mm • Maximum workpiece weight: 1500 kg Hnjdpsx Urafofx Addsg

Condition: used, empty load weight: 6,390 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 12/2018, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,795 mm, suspension: air, tire size: 385/65 R 22.5, color: grey, gearing type: mechanical, Equipment: ABS, Wooden floor, container doors, toolbox, disc brake, lift axle, sliding tarpaulin, sliding roof, EBS, multilock outer frame, KRONE axles, spare wheel holder, checker plate recessed at the rear in the floor plate (4x450mm), tarpaulin inside with wire mesh as theft protection, certificate for load securing according to EN 12642 Code XL Hjdpfx Adox T Aq Sodjng

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Model: V-press 860 plus Year of manufacture: 2013 Pressing force: 418 kN Voltage: 400 V Max. bale weight: 430 kg (depending on material) Bale dimensions: 120 x 110 x 85 cm Machine weight: 2,083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Filling opening dimensions: 120 cm x 65 cm x 85 cm Hnsdpfx Adsx S Excedjg Condition: Very good! Functionality checked. FLITS Rental & Sales Service: Each machine comes with a bundle of baling wire (120 wires). Need additional bundles of baling wire? Request a free quote. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machinery for both businesses and private customers. We focus on providing efficient solutions for materials handling, cleaning, waste processing, and working at height. At FLITS Rental & Sales you will find a wide range of machines suitable for use in various sectors. Check our listings for: balers for efficient waste processing, electric pallet trucks/stackers for fast and safe materials handling, scrubber dryers for thorough and professional floor cleaning, forklifts in a variety of models suitable for different work environments. With FLITS Rental & Sales you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. Do you have questions or would you like a free quote? Feel free to contact us. Waste baler, paper baler, cardboard baler, plastic baler, waste compactor, recycling, textile press, waste, waste processing

Condition: new, The EM 250, a robust Tube End Finishing Machine from KNUTH, is designed to provide precise deburring of tubes, profiles, and flat materials, making it an essential addition to any cold circular saw, shear, or profile processing setup. This powerful machine allows for effective deburring both inside and outside the workpieces utilizing a sturdy wire brush, ensuring that chips and burrs are thoroughly removed while maintaining the integrity of the cutting edge. With a motor rating of 2.2 kW and a speed of 3,000 1/min, the EM 250 is ready to enhance productivity in any workshop engaged in tube processing. It features a rigid machine foot and is equipped with a vacuum exhaust connection for cleaner operation. Moreover, it comes with a 5-year warranty for the drive motor, underscoring its reliability. For a well-rounded solution in Tube End Finishing Machines, consider the EM 250. Request a quote today to learn more about this powerful tool in Tube and Profile Processing. Hsdpou E H Tgjfx Addsng

Condition: used, machine/vehicle number: CE11xxxx, Please contact ATS Norway for more information Please provide reference number upon request: 21000 Hedpowzg A Ijfx Addjng Description: Haulotte scissor lift is being sold as a repair item. Last inspection was carried out in 2021. Owner says wiring needs to be replaced. Ready for delivery. Own weight: Model: Compact 10N 0864

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Equippment: 1 Grip feeder system right hand side Hedpfox Tuzcsx Addong 1 Eccentricpress 90 kN 4 Standard slide units 1 Narrow slide units 1 control shaft Working range: wire diameter range: 0,5 - 4,0 mm strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min

Condition: ready for operation (used), Year of construction: 2006, operating hours: 976 h, overall weight: 7,000 kg, spindle motor power: 28,000 W, number of axes: 4, This 4-axis CHIRON FZ 18 L was manufactured in 2006, featuring a robust 2000x520x600mm working area and a powerful 28 kVA system. With only 976 hours since control system replacement, it's a reliable choice for precision machining. Consider the opportunity to buy this CHIRON FZ 18 L vertical machining centre. Contact us for more information about this machine. • Power supply: 3/N7PE 50/60 Hz • Operating voltage: 400 V • Control voltage: 230/24 V Hodpfox E Eatjx Addsng • Power: 28 kVA • Rated current: 40 A • Operating hours since control system replacement: 976 hours 45 minutes • Fuse: 50 A • Circuit diagram: 189 731 11 01

Condition: good (used), Scissors, pneumatic scissors, air cutters, wire cutting scissors -Manufacturer: nile, pneumatic wire cutting shears for face mask machines -Type: AM10 Hsdpoxwu Uzefx Addeng -Cutting length: approx. 46 mm, see photo -Quantity: 8 pairs of scissors available -Price: per piece -Overall dimensions: 220/35/H35 mm -Weight: 0.4 kg/pc.

Year of construction: 2026, condition: new, We have designed our compact extruder model EX30-28d so that it can be used in all extrusion processes. We offer this extruder as co-extruder or laboratory extruder, as well as for the extrusion of welding wire, filament, solid rods, hoses, or for pelletizing with hot die or strand pelletizer. We also realize other machine dimensions, please contact us. Our standard extruder with nitrided screw and barrel covers most polymer raw materials. Optionally, we also offer this extruder with wear-resistant screw and barrel, for example: for PEEK, titanium, ceramics, etc. Hnjdpfjby Rfpox Addjg

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 23500716, From company liquidation: Pulse Welding Equipment Cebora EVO Speed Star 380 TC Hnjdpfx Adegh Ii Todeg Technical data: Control Sound Digibox MIG P4 Welding range 10-380Ampere 380Ampere at 40% ED 310Ampere at 100% ED 4 roller feed Water cooling WIG welding in DC range possible feed rolls 1,2mm torch 4meter with 1,0mm wire, earth cable and pressure reducer-- Dimensions in mm approx. 950x850x1020 Instruction manual

Condition: used, machine/vehicle number: XLRAE45GF0L41xxxx, mileage: 180,000 km, Year of construction: 2012, Please contact ATS Norway for more information Please provide reference number upon request: 21713 Specifications: Km: Approx. 180,000 Gearbox: Automatic Good tires On Spot Euro 5, 224 hp Platform length: Approx. 5 meters Width: Approx. 2.3 m 2 sets of wheels with tires Engine brake 4x2 Toolbox Fassi F105 crane Remote control Crane diagram Reach: 12 meters hydraulic Support legs Rotating beacon Services performed at local workshop Video Ready for delivery Description:DAF crane truck from 2012.The truck is EU-approved and ready for delivery.Equipped with a Fassi F105 crane.Only 180,000 km. Hnedpfx Aexu Aw Ejddog Km: 180000 HK: 224 Technical approved: Yes EU-approved until: 25.02.2026 Own weight: 6820 Total Weight: 12000 Payload: 5105 Width: 240 Length: 800 Euro: 5 Model: 2012 DAF Fa 45.220 Kranbil. Gearbox: Automatic

Condition: good (used), Industrial - swing gate 8 x 2 m Dimensions per gate side width ca. 395 cm height approx. 220 cm struts diameter: 2 cm Galvanized steel barbed wire holder climbing over protection Item condition: used Hnodpfx Ask Shidoddsg Further articles - new and used - you can find in our store! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: SIEMENS, spindle speed (max.): 10,000 rpm, spindle motor power: 17,000 W, number of axes: 3, This 3-axis HELLER MC 2000 was manufactured in 2011 and features a robust three-phase motor spindle, delivering 17 kW at 10,000 rpm with a SK 40 tool holder. It includes a 2-axis servo tool changer, a stationary tool magazine with 54 positions, and a pallet changing device with 2 pallet positions. If you are looking to get high-quality milling capabilities, consider the HELLER MC 2000 machine we have for sale. Contact us for more information about this machine. Additional equipment • Scraper belt conveyor for dry machining • Cold light in the work area • Central cooling unit for motor spindle and control cabinet, CFC-free Machine Benefits Technical Machine Benefits • Central cooling unit for motor spindle and control cabinet, cfc-free • Design according to ce standards • Paint finish: gray-white / anthracite gray / dust gray / heller red • Control cabinet with integrated control, regulation, and power unit • Operating voltage 400v / 50hz, voltage range +/- 10% // control voltage 24v dc • Increased spindle power with power cutting at 240 nm • Axis dynamic power • Full machine enclosure including cover • Automatic central lubrication • Hydraulic system Extra Information Operating instructions include: Operating instructions Control-specific documents Maintenance instructions Spare and wear parts list Supplier instructions Fluid diagrams and electrical diagrams Three-phase motor spindle package with hollow shaft motor, 17 kW at 40% duty cycle, 10000 rpm in asynchronous technology, SK 40 tool holder according to DIN 69 871, Form A, AD and B, for pull studs according to DIN 69872 Form A and B Hsdpfx Adox D Nbpodeng Adjustable, maintenance-free three-phase feed drives Direct position measuring system in the X, Y, Z, and B axes Movement 2-axis servo tool changer Stationary tool magazine with 54 tool positions and fixed position coding Control panel at the workpiece setup station NC rotary table with 360000 x 0.001° pitch Pallet changing device with 2 pallet positions Workpiece Setup station, manually rotatable 4 x 90° The machine has been measured.

Condition: used, mileage: 433,970 km, power: 390 kW (530.25 HP), first registration: 06/2022, fuel type: diesel, empty load weight: 8,216 kg, maximum load weight: 9,784 kg, overall weight: 18,000 kg, tire size: 385/65 R 22.5, wheelbase: 4,000 mm, next inspection (TÜV): 05/2026, brakes: other, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, total length: 25,400 mm, total width: 40,000 mm, total height: 65,200 mm, Year of construction: 2022, front tire size: 315/70 R 22.5, Equipment: ABS, air conditioning, cruise control, differential lock, navigation system, parking heater, spoiler, Parking air conditioning, ABS, work lights, exterior mirror with Mirror Cam, hands-free car phone system, ventilated driver's seat, fixed roof spoiler, differential lock, electric windows (left and right), XG+ cab, air-suspended driver's seat, leaf-air suspension, radio system, low noise operation, automatic transmission, climate control: automatic climate control plus parking air conditioning, refrigerator, leather steering wheel, air horns, multifunction steering wheel, navigation system, fog lights, PTO prep, leather upholstery (driver), infotainment: navigation device with display, wheelbase 4000 mm, sleeper cab, 2 beds, heated driver's seat, spoiler package, standard auxiliary heater, fuel tank capacity 845 + 430 liters, telephone pre-wiring, cruise control, Safety Package with adaptive cruise control, emergency brake assist, and lane assist, Euro 6 engine, axle configuration 4x2, LED tail lights, LED headlights, skylights, swivel driver's seat, relax bed with electric adjustment, LED ambient interior lighting, Climate Package, full body kit, air-suspended cab, turn assist, sample photos (vehicle still in preparation). Hodpfox Utayjx Addong

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Hedpfxow U Dt Ne Addjng Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Amada Hydraulic Guillotine Shear Type GX II 630 Working width: 3050 mm Max. sheet thickness: 6.35 mm Robust CNC electro-hydraulic guillotine shear AMADA CNC touch control, located front left ("GP 37W2") Machine control system including information display Main display with 4 operating panels Hnodpfx Adexwmycsdjg Control/operation of all machine functions Up to 50 cutting programs, each with up to 15 sequences CNC electromechanical backgauge Travel speed: 100 mm/sec CNC electro-hydraulic cutting angle adjustment CNC electro-hydraulic blade gap adjustment Sight device & cutting line illumination for viewing the scribe line Shearing according to optical scribe mark Manually adjustable table support plates including ball rollers Grip recesses in the front support table 2x movable foot switches Operating manual and circuit diagrams included

Condition: used, machine/vehicle number: YV2RT60G3JA83xxxx, mileage: 136,000 km, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 19582 Truck specifications: - Km: Approx. 136,000 - Transmission: Automatic - Suspension: Steel - Air - 10 ton front axle - Retarder - Euro 6 - Okay tires - Extraction - Length of plane: Approx. 6.5 m - 8x4 - Trailer hitch - VBG - Hydraulic underrun barrier - 551 HP - Turn on 4 - Support legs Hsdpfxsx Izrks Addong - Tool cabinet - Bed - Radio/CD - Air conditioning/AC - Silver agreement with Volvo since new (still going on) Crane specifications: - 2018 HMF 5020K - Hour meter PTO: Approx. 3320 - Support legs - Approved until 10.2026 - FJ-1000 Jib - Crane diagram - 6 5 hydraulic extensions - Videos Description: Well-maintained Volvo FH540 Tridem crane truck from 2019. The truck is equipped with a 50 t/m HMF crane with Jib. Only 136,000 km and 3320 PTO hours. It has been under a lease agreement since new and is still going strong. Ready for delivery. Km: 136000 HK: 550 Technical approved: Yes EU-approved until: 12.04.2026 Own weight: 20870 Total Weight: 37000 Year controlled until: 10.25 Payload: 16055 Width: 255 Length: 1046,3 Euro: 6 Model: 2019 Volvo FH540 8x4 Tridem Kranbil m/ 50 t/m HMF kran m/ Jibb. Lite km og krantimer! Gearbox: Automatic

Year of construction: 1994, condition: used, Manufacturer: IMA Model: K150/C Year: 1994 Type: Automatic cartoning machine with tuck-in closure Power: 3.5 kW Manufacturer's data capacity: 120 strokes/min Mechanical speed achieved in our workshops without products: 70 strokes/min Formats - A mini : 20mm - A maxi : 85mm - B mini : 12mm - B maxi : 60mm - C mini : 50mm - C maxi : 170mm Carton feeding: suction cup picking Product feed belt: cell chain Automatic inspection and rejection of non-compliant cartons Compressed air consumption: 183.5 Nl/min Hnsdpfx Adex R D A Redjg Dimensions depending on layout: diagram available in the photo gallery Weight: 1,400 kg Documentation and video in operation available

Condition: used, mileage: 468,255 km, power: 390 kW (530.25 HP), first registration: 05/2022, fuel type: diesel, empty load weight: 8,433 kg, maximum load weight: 11,067 kg, overall weight: 19,500 kg, tire size: 385/65 R 22.5, wheelbase: 4,000 mm, next inspection (TÜV): 05/2026, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, total length: 25,400 mm, total width: 40,000 mm, total height: 65,200 mm, Year of construction: 2022, front tire size: 315/70 R 22.5, Equipment: ABS, air conditioning, cruise control, differential lock, navigation system, parking heater, spoiler, Stationary air conditioning, ABS, work lights, exterior Mirrors with Mirror Cam, hands-free car phone system, ventilated driver’s seat, fixed roof spoiler, differential lock, electric windows left and right, XG+ cab, air-suspended driver’s seat, leaf/air suspension, radio transceiver, low noise, automatic transmission, climate control: automatic climate control + stationary air conditioning, refrigerator, leather steering wheel, air horns, multifunction steering wheel, navigation system, fog lights, PTO pre-installation, leather upholstery (driver), entertainment: navigation device with screen, wheelbase 4000 mm, sleeper cab, 2 sleeping berths, heated driver’s seat, spoiler package, standard auxiliary heater, fuel tank capacity 845 + 430 liters, phone pre-wiring, cruise control, safety package: adaptive cruise control + emergency brake assist + lane departure assist, additional brake: Intarder, Euro 6 engine, axle configuration 4x2, LED tail lights, LED headlights, adaptive cruise control, skylights, swivel driver’s seat, relax bed with electric adjustment, LED ambient interior lighting, climate package, full spoiler kit, air-suspended cab, turning assistant, stock photos, vehicle is still in preparation! Hnjdpox Utamjfx Addog

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Hnjdpfx Adjviwdmjdsg Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, machine/vehicle number: YV2XZX0C9JA82xxxx, mileage: 196,000 km, Year of construction: 2018, Please contact ATS Norway for more information Please provide reference number upon request: 21687 Truck specifications: Km: 194,000 Gearbox: I-Shift Hnjdpfx Adjxr Tvmjdsg Full air suspension Euro 6, 460 hp 3-step Volvo engine brake Maintained under Volvo service contract Platform length: 6.5 m 2-ton liftgate, Zepro with remote control Tow hitch VBG coupling Lift bogie with steering Toolboxes on both sides Side boards Rotating beacon bar Extra lights Sleeper bunk Good tires Radio/CD Climate control / AC Crane specifications: HMF 2120 from 2017 Crane hours: approx. 1300 Crane diagram Reach: 17.1 meters Max lifting capacity: 3820 kg Remote control Support legs 3rd function on crane / extra hydraulic outlet for tools in the hook Description:Well-maintained Volvo FM450 crane truck from 2018.The truck is equipped with a 21 t/m HMF crane and a 2-ton liftgate.Remote control for both crane and liftgate.Ready for delivery. Km: 196000 HK: 459 Technical approved: Yes EU-approved until: 17.10.2026 Own weight: 14555 Total Weight: 28000 Payload: 13370 Width: 255 Length: 1000 Euro: 6 Model: FM450 Kranbil m/ 21 t/m HMF kran og Løftelem. 194 000 km!

Condition: used, machine/vehicle number: VF611J160GD00xxxx, mileage: 450,000 km, Year of construction: 2016, Please contact ATS Norway for more information Please provide reference number upon request: 21660 Specifications:• Km: 450,000• Transmission: Automatic• Suspension: Steel front, air rear• Euro 6, 388 hp• Engine brake• Platform length: Approx. 6 meters• 4x2• Tow hitch• Clutch and catalytic converter replaced around July 2024• Palfinger PK 19.001 SLD• Delivered fully certified• Reach: 14.5 meters• Crane hours: 1,150• Crane diagram• Remote control• Support legs• Rotating beacon bar• Tires (see pictures)• Bed• Serviced twice a year• Radio/CD• Climate control / AC• Ready for delivery Description:Renault T380 6x2 crane truck from 2016.Both truck and crane are delivered with new approval.Equipped with a 19 t/m Palfinger crane.Serviced twice a year. Km: 450000 HK: 387 Technical approved: Yes EU-approved until: 11.08.2026 Hodpfxsxq Dbqe Addjng Own weight: 11890 Total Weight: 22000 Payload: 10035 Width: 255 Length: 952 Euro: 6 Model: Renault T380 6x2 Kranbil m/ 19 t/m Palfinger Gearbox: Automatic

Condition: used, machine/vehicle number: YS2R6X2000553xxxx, mileage: 150,000 km, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 18545 Specifications: EU-approved for delivery Model year: 2019 Mileage: Approx. 160,000 km Transmission: Automatic Tires: See pictures Emissions: Euro 6 Flatbed length: Approx. 630 cm Total length: 1,096 cm Width: 255 cm Wheelbase: 475/135 cm Towbar: Yes Reversing camera: Yes Stabilizing legs: Yes Drive: 6x2 Engine power: 500 hp Bullbar: Yes LED bar: Yes Toolbox: Yes Bed: Yes Radio/CD: Yes Climate/AC: Yes Crane Specifications: Crane: Hiab 477E-7 Hipro from 2019 Certification: Delivered with new certification Outreach: 7+6 Jib: Yes Crane diagram: Yes Remote control: Yes Description: 2019 Scania R500 6x2 crane truck with a Hiab 47 t/m crane and 7+6 outreach, equipped with a jib. Both the truck and crane come with new certification. The flatbed length is 630 cm. Quick delivery available. Km: 150000 HK: 500 Technical approved: Yes EU-approved until: 26.09.2026 Own weight: 20374 Total Weight: 30000 Payload: 9551 Width: 255 Length: 1096 Euro: 6 Model: R500 Gearbox: Automatic Hodpfovg Aivox Addsng