Used Wood Drying Chamber for sale (10,243)

Year of construction: 2021, condition: excellent (used), Wood dryer by Italian company BIGonDRY 3 chambers - each: - width 9.6 m - length 7.5 m - gate height 4 m Input of one about 100 m3 - total 300 m3 Dryers used only for tests - practically new. Hodpfx Aasvkxmfoask Complete with full documentation, automation, laptop and internet connection (remote control).

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, Showroom model. Condition like new. We offer for sale a drying chamber powered by a high-efficiency gas burner with an indirect system (no open flames) for heat exchange. Suitable for all types of wood, softwood, hardwood, as well as for pallets or firewood. Hjdpfxsyyb Nyo Aaaek Used only occasionally for demonstrations and drying cycle tests, 100% fully functional.

Condition: excellent (used), Here we offer you a chamber dryer. Outer dimensions approx. width: 1.885 mm depth: 1.200 mm height: 2.425 mm Usable space dimensions approx. width: 1.030 mm depth: 1,000 mm Height: 2,100 mm Usable space: 2.2 m³ Nominal temperature: 100 °C Working temperature: 85 °C Heating medium: 3 x 400 V, 50 Hz Heating capacity: 20 kW Circulating air volume: 4,500 m³/h / 400 Pa Motor power: 1,1 kW Protection class: IP 54 The chamber heating furnace must not be used for flammable or explosive substances. The chamber heating furnace must not be installed in the Ex-area. Paternoster device External dimensions: Hedpfxsgm Hwue Aaaok Height: 1,880 mm Width: 809 mm Depth: 950 mm support sets: 13 pieces Pitch: 228 mm Carrying set width: 354 mm Carrying set depth: 320 mm useful height: 135 mm Power of drive motor: 0.25 kW at 189 Nm Transport speed: on average 5 m/min. Payload/carrier set: max. 10 kg total payload: max. 130 kg total weight loaded: max. 730 kg year of construction: 2005 Type: Ke/SO Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2022, condition: new, functionality: fully functional, Lauber wood dryer longitudinal ventilation Hedpfx Aemidtroaaek Chamber with stacking trolley Net volume 7.2 m3 with wood temperature measuring point -> new / unused / original packaging -> available immediately (standard delivery time approx. 3/4 year) -> see detailed description in the photos -> collection, loading, etc. by buyer -> transportation, customs clearance and insurance by buyer

Year of construction: 2026, condition: reconditioned (used), functionality: limited functionality, machine/vehicle number: 559, Dryer optimized for thick timber or hardwood Usable length: 5000 mm Usable height: 1100 mm Usable width: 1100 mm New electrical cabinet and sensors Controlled drying function Missing external rail and trolley (can be supplied or we will assist the buyer with fabrication) Dryer can be inspected in department 74 Hsdpfjya Ik Aex Aaaek

Year of construction: 2014, condition: like new (used), fully automatic supply and exhaust 3 chambers Hjdpfevzuutjx Aaajk chamber dimensions 6.5 x 4 x 4.1m furnace power 350kW

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: Nr.50086, New machine for sale due to circumstances: 6 connection points with ventilation duct. Collection only! Price ex location 31637 Rodewald. Hsdpfxew Uf S Ho Aaaek

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: GSVW-3080-1250-1-F, Cross-flow vacuum dryer with 31.68 m³ capacity The chamber holds 1 package in width at 1.20 m, 3 packages in height at 0.80 m with 0.10 m thick spacer timbers, with a maximum wood length of 16.0 m plus 0.5 m clearance. The chamber holds a net of approx. 19 m³ of trimmed timber with a wood thickness of 50 mm and a stacking stick thickness of 24 mm. Usable space: width 1.20 m, height 2.70 m, length 12.0 m Technology (see detailed performance description under Documents) - Stainless steel cylinder with 80 mm thick resin-bonded rock wool insulation and a ventilated external aluminum trapezoidal sheet cladding. - A vacuum door with special lock for easy end-side loading with walk-on trolley. - A vacuum water ring pump with a capacity of 5.5 kW evacuates the dryer (to be replaced in April 2025). - For air flow through the stacks, 12 fans with 1.5 kW rated power each in delta configuration. The average power consumption in vacuum is only about 0.5 kW per fan. - Hot water heat exchanger for max. 98 kW at 90°C supply temperature installed - The electrical connection is 47 amperes at 3 x 400 V / 50 Hz. - Excess moisture is condensed out via air heat exchangers. - The chamber climate can be humidified as needed using a hot water heated evaporation basin. - The chamber dries fully automatically. Only the wood type, wood thickness, and desired final moisture need to be entered. - Control MB4000 V including control panel - 10 wood moisture measuring points as well as climate and temperature sensors - Run-out rails must be re-ordered, as these are concreted in. The price is ex works and must be paid net before dismantling the plant. The plant must be dismantled or removed by the buyer. Dismantling is not included in the price. Hedpewrb Nksfx Aaajk

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access Hjdpfxjfzq Sts Aaaek • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Year of construction: 2020, condition: new, Description Hsdpfsflmdbsx Aaask Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions Hsdpefy T Szofx Aaask • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC Hsdpfxswp Rqfs Aaask The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: as good as new (ex-display), Year of construction: 2018, For sale is a wood chips and sawdust drying technology with a capacity of 400 kg / hour, together with a raw material feeding system. The machine is brand new and has not been commissioned. Hjdpotpxy Tefx Aaaek

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, cutting length (max.): 3,600 mm, cutting width (max.): 400 mm, year of last overhaul: 2024, Woodmizer SLP line and extraction system with log turner infeed fully operational video shows complete line with crosscut. £80,000 plus VAT cost over £250,000 just for the sawline. Contact me for any futher information. Hedjyub Ahspfx Aaask

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: MB200MEH3SP-E, functionality: fully functional, cutting length (max.): 3,962 mm, cutting height (max.): 203 mm, cutting width (max.): 1,420 mm, Lightly used Woodmizer Slabmizer MB200. This machine is ideal for surfacing large planks and live edge slabs. The Slabmizer MB200 is renowned for its precision and reliability. Includes extraction unit. Specifications: Brand: Woodmizer Model: Slabmizer MB200 Year of manufacture: October 2021 Power supply: 380 volt / 16 amp Motor: 2.9 kW Extraction unit: Power supply: 380 volt / 16 amp Capacity: 2,950 liters per minute Asking price for Slabmizer including extraction: €11,950 excl. VAT Additional information: Maximum material width: 1,420 mm Maximum material height: 203 mm Hedpfx Aasyh Ng Ssajk Maximum material length: 3,962 mm (or longer with optional 1.5 m extensions) Minimum material length: 558 mm (22") Maximum cutting depth: 3.2 mm (1/8") Minimum cutting depth: 0.4 mm (1/64") Cutterhead: 127 mm (5") with five four-sided carbide knives Cutterhead speed: 5,500 RPM Powered cutterhead: Directional control and variable feed rate Sanding head: Optional 7" orbital sanding head Dust extraction port: 90 mm (3.5") diameter Country of manufacture: Poland

Year of construction: 2011, condition: used, Intervac GmbH Mobile Double Chamber Vacuum Machine Hjdpfx Aaoym U Syeaek Type: INV 11/11 Year of construction: 2011 230/400 V, 50 Hz, 2.5 kW Weight: 355 kg Seal length: (2x) 620 mm Dimensions chamber: (2x) 600 mm x 670 mm Total dimensions: 1550 mm x 970 mm x 1220 mm.

Condition: used, Webomatic Mobile Double Chamber Vacuum Packer Type: CD 120-PR Serial number: 5710JL525 400 V, 3 Ph, 50 Hz, 5.0 A, 2.2 kW Seal length: (2x) 640 mm Hsdpfxjym U Ins Aaask Dimensions chamber: (2x) 650 mm x 570 mm Busch vacuum pump Total dimensions: 1420 mm x 840 mm x 1060 mm.

Year of construction: 2019, condition: ready for operation (used), overall weight: 12,000 kg, total height: 4,500 mm, This LINYI JIANZHONG WOOD MACHINERY JJC-CP was manufactured in 2019. It features a maximum pressure of 500 tons, adjustable for various applications, and can handle filling sizes up to 1300 x 2500 mm. With a capacity of 6 batches per hour and a total weight of 12000 kg, this carcase press is CE marked, ensuring compliance with safety standards. Contact us for more information about this machine. Machine Benefits Hjdjyaqgmjpfx Aaask Technical Machine Benefits • Max pressure: 500 t (adjustable) • Filling height: 900 - 1300 mm • Max filling size: 1300 x 2500 mm • Press position: approx. 500 mm below floor level • Feeding table: 2000 x 1960 mm • Pick-up table: 2350 x 2500 mm • Capacity: 6 batches per hour • Ce marking Extra Information Machine still under power Dimensions Machine Depth 3600 mm

Condition: new, Year of construction: 2025, functionality: fully functional, Professional WoodMizer LT70 sawmill, complete configuration, still packaged. The machine was delivered in April 2025 and has never been used. It was assembled by the manufacturer and is ready for operation. Hjdpjyr I Dmsfx Aaask

Condition: used, Year of construction: 2024, The control of the dust extraction system is switched on and off via 2 sensors. Suitable for installation on an existing transport system Sword brush Micro-moistening of the brush elements by means of an antistatic moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust from the material surface and from recesses. The suction system removes the loosened particles. Hsdpfoun N Aujx Aaajk Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Feed speed: max. 35 m/min Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Size of the machine: Width: 2,280 mm Installation length: 500mm

Condition: new, Year of construction: 2025, saw blade width: 35 mm, saw blade length: 4,010 mm, wheel diameter: 4,830 mm, LT15WCS3EH15SP-ESWPD Hsdpfx Aasyybcgoaok Electric motor 11 kW Maximum log diameter: 90 cm Cutting length: 5.4 m Clearance between rollers: 88 cm Maximum cutting width (beam): 82 cm Maximum cutting height above blade: 27 cm Automatic cutting thickness adjustment device SW10 Debarker Electric head vertical movement (screw) Electric head feed forward/backward Manual blade guide arm Blade cleaning system – solenoid valve Blade tensioning system – screw with pressure gauge Guide wheel diameter: 483 cm Double-support mast construction 24 months warranty.

Condition: new, Year of construction: 2025, cutting length (max.): 5,400 mm, saw blade width: 35 mm, saw blade length: 4,010 mm, wheel diameter: 4,830 mm, LT15SCS3EH10SP-ESWPD Electric motor 7.5 kW Maximum cutting diameter: 70 cm Cutting length: 5.4 m Clearance between rollers: 64 cm Maximum cutting width (cant): 59 cm Maximum cutting height above blade: 27 cm 3 clamps, 6 lateral supports Hedpfx Aaeyyaxyjajk Automatic thickness setting device (Setwork – SW10) Debarker Electric head feed forward/backward Electric head feed up/down (screw) Manual saw blade guide arm Blade cleaning system – electric solenoid valve Blade tensioning system – screw with pressure gauge Blade guide wheel diameter: 483 mm Double-support mast construction Electrical requirements: 400 V, 16 A (7.5 kW) 24-month warranty.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Press type JJZ-CP is designed for the production of plywood, doors, MDF board. Feeding and receiving of glued elements from the press is done automatically by means of driven rollers. The press can cooperate with glue feeders. Technical data: -max.pressure 500T/ adjustable/ -max. batch height 1300mm -max. charge size 1300x2500 -press dimension 3600x1370x4500 mm -Press position ~500mm below floor level Hodpfx Astutwvjaajk -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max.power 13,2 kW -CE mark

Condition: like new (used), Line for cleaning and drying (roasting) sesame seeds, pumpkin seeds, coffee seeds etc. Hodpfx Aajyycuksaek Machine: throughput 15-30 t/h cyclone filter with pre-screen and descaling agent chaff silo fluid bed dryer final cleaning of seeds using the Storex Z+ optical sorter Perfect condition!

Condition: reconditioned (used), Year of construction: 2019, machine/vehicle number: WM1000MEH40S, functionality: fully functional, operating hours: 197 h, power: 30 kW (40.79 HP), type of input current: AC, cutting width (max.): 1,700 mm, actuation type: electric, total length: 10,000 mm, year of last overhaul: 2025, A powerful and extremely robust industrial sawmill with an impressive cutting capacity of up to 170 cm trunk diameter is available for sale. The machine is fully operational and in very good condition with only 197 operating hours. Ideal for professional users, large-scale woodworking and businesses with high demands on precision and performance. Technical data & equipment: - 30 kW electric motor – powerful and efficient - Log diameter up to 170 cm Ø Hsdpfjypkc Hsx Aaaok - Electric height adjustment - Electric feed - Integrated cutting thickness calculator for precise results - Cutting length 6.5 m, optionally extendable - Includes 10 m rail system - Year of manufacture: 2019 - Only 197 operating hours - Fully operational - 2-year warranty This is an opportunity to purchase a powerful machine with very low mileage at well below the original price. Item number: 25-G07 / WM1000MEH40S Note: The photos shown are examples and may differ from the sawmill actually offered. If you are interested or have any questions, please do not hesitate to contact us. We will be happy to send you further information at any time upon request.