CNC Turning- and Milling Center

MURATEC MT 12 Gantry

Condition: good (used), Year of construction: 2008, functionality: fully functional, Control: OSP-P20L-R Swivel diameter over bed: 450 mm Swivel diameter over longitudinal slide: 350 mm Swivel diameter over cross slide: 300 mm Spindle bore: 43 mm Spindle speed range: 75 - 3,000 rpm X-axis feed: 0.00001 - 39.37 mm mm/rev X-axis rapid traverse: 20 m/min Z-axis feed: 0.00004 - 38.37 mm/rev Z-axis rapid traverse: 25 m/min Tjdjvk Sqkepfx Adlof Tool turret: 12-way Driven tools Tool holder: VDI30 Machine weight: approx. 3,800 kg Bar loader BREUNING IRCO

Condition: good (used), Year of construction: 2012, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1500rpm spindle, 165mm bar capacity, Tsdpswnfzcsfx Adlof 10 station turret 45kW spindle motor, FANUC control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: used, Year of construction: 1979, max. wheel diameter 350 mm gear width 350 mm max. module 8 min. module total power requirement 7,5 - 22 kW weight of the machine ca. t Tsdpst Hwxzjfx Adlsf dimensions of the machine ca. m Gear hobber with gear shaping device, 2-cut cycle

Condition: excellent (used), Year of construction: 2010, operating hours: 15,600 h, functionality: fully functional, Spindle speed: 50-6000rpm Movement XA-XB: 205mm ZA-ZB: 700mm W: 730mm YA-YB: 95mm Turrets: 2x 16pos Multitasking V16 Spindlespeed live tools: 45-6000rpm Motors live tools: 5.5/3.7kW Spindle motors: 22/15kW Manufacturing year: 2010.12 Length: 3300mm Width: 2500mm Height: 2500mm Weight: 9000kg Tjdpswfr R Ejfx Adlsf Robot interface

Condition: good (used), STAR SV-32 CNC sliding headstock automatic lathe TECHNICAL DATA Main spindle, bar capacity: 32 mm Travel: 310 mm Spindle speed: 7000 rpm Spindle drive power: 7.5 kW Minimum resolution, C-axis: 0.01 ° Counter spindle, bar capacity: 32 mm Spindle speed: 7000 rpm Spindle drive power: 7.5 kW Resolution, C-axis: 0.01 ° Turret: Number of tools: 10 of which driven: 10 Speed of the driven tools: 5`700 rpm Driven tools, power: 2.8 kW Todpfeu Uicyex Adlef Tool carrier: Number of tools: 4 Of which driven: 3 Speed of the driven tools: 6'000 rpm Weight and dimensions: Weight: 3800 kg Dimensions: 2700 x 1400 x 2400 mm SCOPE OF OFFER U.A: (list not exhaustive) Control system: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson transformer High pressure pump Parts conveyor Chip conveyor Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.

Condition: used, Year of construction: 1980, Technical details: Tedewy Ri Njpfx Adlef grinding diameter: 380 mm grinding length: 1000 mm centre height: 180 mm grinding wheel diameter: 400 mm max. workpiece weight between centres: 250 kg total power requirement: 10 kW weight of the machine ca.: 4,1 t dimensions of the machine ca.: 3 x 2 x 1,6 m with internal grinding attachment with fixed and swivelling headstock with coolant tank *

Condition: good (used), Year of construction: 2000, Daewoo Puma 230, year of manufacture 2000, Fanuc 18 iT control, turning length 548 mm, turning diameter 350 mm, 10-position turret, Todpfewx I Efox Adlsf tailed tailstock, three-jaw chuck Ø 254 mm, tool measuring arm, swarf conveyor, coolant system, main spindle newly mounted, flat guides, accessories,

Condition: used, Year of construction: 2005, General Information: - Model: ROBODRILL α-T2 STAMA - Serial Number: 046VH155 - Year of Manufacture: 2005 - CNC Controller: FANUC (Model A04B-0094-B111#BD) - Weight: 2200 kg - Power Supply: 200 V, 50/60 Hz, Three-phase - Power Consumption: 10 kVA ----- Machining Capabilities: - Operations: - Milling (high-speed and high-precision milling) - Drilling - Rigid tapping ----- Axis Travel: - X-axis Travel: ~500 mm - Y-axis Travel: ~400 mm - Z-axis Travel: ~330 mm ----- Spindle: Tedpsuru I Rsfx Adlef - Spindle Taper: BT30 - Standard Spindle Speed: up to 10,000 rpm ----- Tool Changer: - Type: Automatic tool changer - Tool Change Time: ~1.6 seconds ----- Rapid Traverse Rate: - Rapid Traverse Speed: 54 m/min on X, Y, and Z axes ----- Key Features: - Compact structure for high rigidity - High productivity with ultra-fast drilling and tapping cycles - Easy maintenance (integrated FANUC diagnostic interface) - Compatibility with automated production cells (co-branding with STAMA)

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle power : 15 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 45 [mm] - Max. machinable length : 560 [mm] - Max. chuck diameter : 220 [mm] TURRET - Number of positions : 12 - X/Z stroke : 170 / 560 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS Tjdpfxouhaf So Adlsf - Machine floor space : 4240 X 2000 [mm] - Machine height : 1900 [mm] - Machine weight : 4200 [kg] EQUIPMENT - CNC : Fanuc 21i-TB - Coolant tank - Chips conveyor - Tool probe

Condition: ready for operation (used), Year of construction: 2001, CNC milling machine TOS TV-1000 A CONTUR Manufacturer: Trens Model: MC 100 VA Year of construction: 2001 Condition: used Control unit: Heidenhain TNC 426 X-axis travel: 1000mm Y-axis travel: 600mm Z-axis travel: 760mm Table length: 1080mm Table width: 580mm Tjdpfohlp Iwsx Adljf Tool changer with 40 positions Tool holder according to ISO 40 Spindle speed: 8000 rpm Overall dimensions: L 3200 x W 2100 x H 2900 mm Weight: 6200 kg Shipping possible throughout Germany and Austria. Surcharge 1000 € Sale excluding warranty.