CNC lathe

Muratec MW200

Condition: used, TECHNICAL DETAILS - Number of axes : 4 - Number of spindles : 2 - Number of turrets : 2 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 15 [kW] - Spindle speeds : 45 - 3500 [rpm] - Max. chuck diameter : 210 [mm] MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 15 [kW] - Spindle speeds : 45 - 3500 [rpm] Ksdjzf Ra Ajpfx Acfsdp - Max. chuck diameter : 210 [mm] TURRET 1 - Number of positions : 10 - X/Z stroke : 190 / 170 [mm] TURRET 2 - Number of positions : 10 - X/Z stroke : 190 / 170 [mm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 73 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3900 x 2130 [mm] - Machine height : 2350 [mm] - Machine weight : 7200 [kg] EQUIPMENT - CNC : Fanuc 32i - Interface : USB / PCMCIA - 3 colors status lamp - Tool monitoring - Coolant tank * with high-pressure pump : 15 [bars] - Chips conveyor : DROITE - Electric transformer

Condition: good (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Kdedpfx Acormkfnjfsp Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: used, TECHNICAL DETAILS - Number of axes : 4 - Number of spindles : 2 - Number of turrets : 2 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 15 [kW] - Spindle speeds : 45 - 3500 [rpm] - Max. chuck diameter : 210 [mm] MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 15 [kW] - Spindle speeds : 45 - 3500 [rpm] - Max. chuck diameter : 210 [mm] TURRET 1 - Number of positions : 10 - X/Z stroke : 190 / 170 [mm] TURRET 2 - Number of positions : 10 - X/Z stroke : 190 / 170 [mm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 73 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3900 x 2130 [mm] - Machine height : 2350 [mm] - Machine weight : 7200 [kg] EQUIPMENT - CNC : Fanuc 32i - Interface : USB / PCMCIA - 3 colors status lamp - Tool monitoring - Coolant tank * with high-pressure pump : 15 [bars] - Chips conveyor : DROITE - Electric transformer Kodpfxjzf Rave Acfsdp

Condition: used, TECHNICAL DETAILS Ksdpfjzf Rapox Acfedp - Number of axes : 4 - Number of spindles : 2 - Number of turrets : 2 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 15 [kW] - Spindle speeds : 45 - 3500 [rpm] - Max. chuck diameter : 210 [mm] MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 15 [kW] - Spindle speeds : 45 - 3500 [rpm] - Max. chuck diameter : 210 [mm] TURRET 1 - Number of positions : 10 - X/Z stroke : 190 / 170 [mm] TURRET 2 - Number of positions : 10 - X/Z stroke : 190 / 170 [mm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 73 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3900 x 2130 [mm] - Machine height : 2350 [mm] - Machine weight : 7200 [kg] EQUIPMENT - CNC : Fanuc 32i - Interface : USB / PCMCIA - 3 colors status lamp - Tool monitoring - Coolant tank * with high-pressure pump : 15 [bars] - Chips conveyor : DROITE - Electric transformer

Condition: used, Year of construction: 2007, functionality: fully functional, total height: 5,980 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 460 kg, input voltage: 400 V, Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Kdedjwnankepfx Acfop Control: C2000, with B/W OP2000 display Serial No.: Year of construction: 2007 Total Load: 2 x 33,500 kg Load per tray: 460 kg (evenly distributed) Tray dimension: 3050 x 864 mm Number of trays: 32 pieces (more on request) Dimensions Shuttle W x D x H: 3380 x 3074 x 5980 mm (height Kardex is adjustable to available height) Dimensions Shuttle D with full tray extraction table: 4198 mm Power: 3/N/PE400 V, 17 A, 50/60 HZ, 8.6 kVA This offer is valid subject to the system being unsold. Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 32 trays Medium X Type 2, 460 kg each, evenly distributed; more trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions: Width x Depth x Height: 3380 x 3074 (4198) x 5980 mm - Footprint of the system approx.: 14.19 m2 - Capacity with 32 trays: approx. 84 m2, each tray is approx. 2.64 m2 - Electronic volume measuring system in 25 mm grid - An access opening with sliding doors to protect people and stored goods - Control C2000 with graphic display OP-C2000 B/W - LED anti-glare lighting above access point - Use of toothed belt for minimum noise - Use of toothed belt for fastest order picking - Distances can be realized in steps of 25 mm by arranging the support profile, a prerequisite for high compression storage - Automatic full tray extraction table Price: On request, via email only Price: excl. VAT, including transport and installation Delivery time: in stock Machinehandel De Leeuw BV specializes in used machines and accessories for the metalworking industry and used paternoster systems from, among others, Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Condition: good (used), Year of construction: 2012, turning diameter: 200 mm, spindle speed (max.): 3,500 rpm, overall weight: 7,200 kg, chuck outer diameter: 254 mm, Muratec MW200 GT for sale Used, in excellent condition. The machine can be viewed by appointment. Delivery is the customer's responsibility, but we can help with packing and loading if need. Kdjdpfx Aev I Udzocfep Delivery: EXW Székesfehérvár

Condition: used, Year of construction: 2004, Mazak Multiplex 6300 Mazatrol 640T YOM: 2004-11 approximately 20 pcs tools Kedpfx Aev Tvkaocfedp Mazak Flex-GL200F More information is coming soon.

Condition: good (used), Year of construction: 2007, functionality: fully functional, NAKAMURA WY250 SUPERMILL LATHE, YEAR 2007, OPERATIONAL, WITH DOUBLE Y-AXIS - FANUC 31iA2 CNC control - Main spindle bar capacity: 65mm, power: 18 kW, ASA 6, 4500 RPM - Sub-spindle bar capacity: 51mm, power: 11 kW, ASA 5, 5000 RPM Ksdpfx Acjyrb Tnefodp - Live tool power: 7 kW with 40 Nm torque on both turrets (65mm throat, SUPERMILL) - Y-axis on both turrets (Y-stroke upper +50/-50 mm; Y-stroke lower +20/-50 mm) - Part catcher type G - Distance between spindle noses: 870 mm - Maximum turning diameter: 225 mm - Rapid traverse Z: 36 m/min, rapid traverse X: 18 m/min - Enlarged 500L coolant tank with chip conveyor - Turret coolant pumps: GRUNDFOSS CRK4-100/10, double stage, 3-12 bar with filters - Coolant wash over spindles - Air blow and coolant wash through sub-spindle - Auto shut-off - 3-color stack light - NT Nurse axes load monitor - IEMCA MASTER 880 bar feeder, year 2003 - Set of toolholders and collet holders as follows: Supplied with the machine: 4 external toolholders 4 dual opposed toolholders 6 boring bar holders 1 H32 cutoff blade holder 4 radial live toolholders (brand HEIMATEC) 4 axial live toolholders 1 Bellegrandi collet holder type MSCNT70-A6” for BA and BD series, size 70 (complete with mounting sleeves, main spindle side) 1 Bellegrandi collet holder type MSCTNR70-A5” for BA series, size 70 (complete with spring ejector, sub-spindle side) Complete Hand Jaw set for the part unloader

Year of construction: 2004, condition: used, bar material dia. 6 - 120 mm Bar length 100 - 1.600 mm bar weight max. 63 Kg feed length 1.000 mm Ksdpfoyhhriox Acfsdp longitudinal adjustment 600 mm machine weight ab. 600 kg dimensions of the machine ca. 2,2 x 1,5 x 1,5 m Current operating hours display: 4867 hours

Condition: refurbished (used), functionality: fully functional, saw blade diameter: 360 mm, cutting height (max.): 100 mm, cutting range round steel at 90°: 100 mm, section length (min.): 300 mm, Fully automatic carbide circular saw machine type KMR 100 AP Refurbished to mint condition - available ex stock Working range: Round material 20 - 100 mm Kdodpfxoh Uqpvo Acfop Square material 20 - 80 mm DRIVE PERFORMANCE Frequency-controlled saw motor 11.0 kW cuting speeds 20 - 150 m/min incl. Infeed magazine and sorting for trim cuts/rest pieces and good parts Suitable for cut off length up to 300 mm Cutting time for Ø 100 mm solid material 1.0037 approx. 7 seconds !!