CNC lathe

Okuma Genos L300-MW-e

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: MW149, Technical specifications: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left spindle 3000 rpm - Continuous power (100% duty cycle): Left spindle – 15 kW / Right spindle – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Ksdexxiiispfx Ah Uonf Sub-Spindle (Counter Spindle) - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower turret, all driven stations - Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical System - Operating voltage: 400V 3-phase, fuse protection 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities: - Horizontal design for optimal chip evacuation - Parts catcher and custom-made parts conveyor strip - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load force auto learning analyzer, controlled by OSP-P300L-R - Part detection at sub spindle with low-pressure compressed air gauges - Spindle cooling system - Documentation: available electronically and as manual Option: Bar feeder: TopAutomazione FU352SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Machine status: Machine operational only with main spindle – sub spindle requires repair.

Condition: used, Year of construction: 2019, HAAS CNC - LATHE with Sub-Spindle DS - 30Y Year of manufacture: 02/2019 Total tool changes: 809,126 Total power-on hours: h Workpiece counter 1: 4,872 Workpiece counter 2: 4,872 Standard Equipment - Heavy-duty cast iron construction - Robust protective steel sheet enclosure - BMT turret with 12 stations - AC servo motors for axis drives - Synchronized spindles for on-the-fly workpiece transfer Main spindle: - Spindle speed up to 4,800 rpm - 22.4 kW spindle power - 254 mm diameter chuck Sub-spindle: - Spindle speed up to 4,800 rpm Kjdsxxkaiepfx Ah Uonf - 14.9 kW spindle power - 210 mm diameter chuck - Driven tools and C-axis - Flood coolant system - Automatic lubrication system - Air-conditioned control cabinet - HAAS CNC control to DIN 66025 / Fanuc compatible - Synchronized thread cutting - Spindle orientation - 1GB program memory - Tool load monitoring - Ethernet interface - USB interface - Lifting device HAAS CNC - LATHE with Sub-Spindle DS - 30Y Year of manufacture: 02/2020 Total tool changes: 335,409 Total power-on hours: 8,245 h Workpiece counter 1: 8,360 Workpiece counter 2: 8,360 Standard Equipment - Heavy-duty cast iron construction - Robust protective steel sheet enclosure - BMT turret with 12 stations - AC servo motors for axis drives - Synchronized spindles for on-the-fly workpiece transfer Main spindle: - Spindle speed up to 4,800 rpm - 22.4 kW spindle power - 254 mm diameter chuck Sub-spindle: - Spindle speed up to 4,800 rpm - 14.9 kW spindle power - 210 mm diameter chuck - Driven tools and C-axis - Flood coolant system - Automatic lubrication system - Air-conditioned control cabinet - HAAS CNC control to DIN 66025 / Fanuc compatible - Synchronized thread cutting - Spindle orientation - 1GB program memory - Tool load monitoring - Ethernet interface - USB interface - Lifting device

Condition: excellent (used), Year of construction: 2022, MAZAK QUICK TURN 200MY Max. machining diameter: 380 mm Max. machining length: 555 mm Max. milling speed: 5,000 rpm Knjdpfxox Dr Uls Ah Usf Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC CONTROL Mazatrol SmoothG - KITAGAWA three-jaw chuck BB-208, diameter 210 mm - Tool Eye - C-axis - Y-axis - Interface for bar loading magazine - automatic part catcher - NC tailstock - reinforced coolant pump - chip conveyor - 8 fixed tool holders - 2 driven tool holders

Condition: used, Year of construction: 2003, turning diameter 0240 mm turning length 525 mm control 840 D Siemens centre height 120 mm turning diameter over bed 450 mm turning dia. over face-slide 300 mm turning speed range - main spindle max. 5.000 min/-1 power capacity - main spindel 21,5 kW usable bar diameter 42 mm travel -x axis 210 mm travel -y axis 80 mm travel -z axis 525 mm number of toolpositions 16 pos. tool taper VDI 30 Shank diameter 20 x 20 mm rapid traverse X: 24 / Z: 30 m/min Knjdpfew U Eifox Ah Ujf Feed force 4,5 kN total power requirement 30 kVA weight of the machine ca. 5 t dimensions of the machine ca. 5,0 x 2,2 x 1,8 m CNC - Lathe with sub spindle. Control Siemens 840 D. Machine has Y- axe and live tooling. We supply an IEMCA VIP 80 bar loader along with the machine and many accessories.

Condition: good (used), Parts shown by hand not come. Knedpfswb Em Sjx Ah Uof Technical data shown on picture. Tools in wooden box will come with machine.

Condition: used, Year of construction: 2017, operating hours: 33,500 h, functionality: fully functional, machine/vehicle number: W6212-T63-280, We have a CNC lathe for sale, brand Okuma-Genos, which is ready for operation. The machine is fully functional and has been regularly maintained and serviced. - Y-axis - Main and sub spindle Knsdpfjw Np Uhox Ah Usf - Tool probe - Parts catcher Spindle speed: 3800 rpm Spindle operating hours: 20,503 h A detailed description of the machine is included in the attachment. Technical condition: Good. The machine has been in our facility since new, purchased in 2017 and commissioned in the first quarter of 2018. The lathe is connected to power and currently in operation. Viewing and functional inspection possible under power in our workshop. Reason for sale: ongoing changes in our projects. Optionally, an LNS bar feeder may be purchased for €7,000 and an oil mist separator for €1,500 (both visible in the pictures).

Condition: good (used), Year of construction: 2006, Used OKUMA lathe - Model: LT200-M TwinStar Knedev S Su Sspfx Ah Uof - Year of manufacture 2006 - Includes bar magazine - Includes chip conveyor

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: 840 Dsl - Celos, _____ Description: Year of manuf. : 2022 Control : Siemens 840 Dsl - Celos Turning diam. : 140 mm Turning length : 235 mm In General: Year of manufacture:2022 Control system:Siemens 840 Dsl -CELOS Turning diameter:140 mm Turning length:253 mm Bar capacity:50 mm Main spindle: Technology:Motor spindle Speed:7,000 rpm Power:24 kW Torque:100 Nm Kodpfx Aoxy Ubgoh Uonf C-axis:0.001°Chuck Sub spindle: Technology:Motor spindle Speed:7,000 rpm Power:24 kW Torque:100 Nm C-axis:0.001° Chuck:Hainbuch clamping top Tool carrier I (X/Y/Z): Technology:Tool turret Number of stations:12 Tool holder:VDI 25 Tool drive:8,000 rpm X-axis:240 mm Y-axis:70 mm (+/- 35 mm) Z-axis:350 mm Tool carrier II (X/Y/Z): Technology:Tool turret Number of stations:12 Tool holder:VDI 25 Tool drive:8,000 rpm X-axis:125 mm Y-axis:70 mm (+/- 35 mm) Z-axis:380 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system incl. temperature control Bar loader:Top Automazioni Parts removal:Parts gripper + cycle belt Tailstock:Below counter spindle Chuck:2x Hainbuch clamping top Tool holders:Various driven and static holders

Condition: ready for operation (used), Year of construction: 1988, operating hours: 36,452 h, Boley BDN 160 ZB including LNS Hydrobar bar feeder manuals various tools Kjdswwbatspfx Ah Uonf