CNC turning and milling center

Okuma LB35II

Condition: used, Year of construction: 1997, Distance between centers 2070 mm Swing over bed 700 mm Swing over carriage 430 mm Max turning diameter 460 mm diameter (2000 mm) Spindle bore 90 mm Ksdpfx Aow Rkd Tjddell Spindle speeds 14-3200 rpm Z-axis movement 2070 mm X-axis movement 330 mm Turret w/12 stations Tailstock taper MT 5 Control: OSP 7000-L Equipped with: Hydraulic steady rest Chip conveyor 10-20 tool holders 10-20 sets of jaws

Condition: excellent (used), Year of construction: 2011, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, nominal power (apparent): 30 kVA, torque: 163 Nm, table load: 400 kg, rotary table diameter: 400 mm, rotational speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 48, tool length: 300 mm, tool diameter: 70 mm, tool weight: 10 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Technical characteristics: CNC OSP P 200 Chip conveyor 48 tools Continuous table 360,000 pos. 15,000 rpm BT 40 Cooling through spindle 20 Bar Kljdpsuw Sq Uofx Addjl Presetting on board table Shower work area washing system P.S. The machine has always worked in full oil Teflon material

Condition: good (used), Year of construction: 1997, Parts shown by hand not come. Kljdpfx Aepy Errjddel

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 800 kN Stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Kodpfewq Dpqex Addell Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R The machine starts, but the control does not respond to commands. The previous user replaced the original AMADA control with a DELEM unit.

Condition: used, Year of construction: 2016, controller manufacturer: Hurco, controller model: MAX5, _____ Description: Year of manuf. : 2016 Control : Hurco MAX5 Speed : 12000 rpm Movement X/Y/Z : 1625/864/762 mm Spindle: Technology:Belt-driven spindle Speed:12.000 rpm Power (max.):18 kW Torque (max.):239 Nm Taper:SK40 Workingtable: Clamping surface:1.676 x 889 mm Tableloading (max.):2.722 kg In general: Klodpexpb Swefx Addol Toolmagazine:40 Stations Rapid travers in X/Y/Z:18/18/13,5 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internaal cooling unit with filter and High-pressure, 20 bar Workpiecemeasurement:Touchprobe, Renishaw OMP 60 Toolmeasurement:Probe, Renishaw TS27R Setup operations:Electronic handwheel Furhter Equipment:Chiller, Trafo Further Accessory:Misc. toolholder

Condition: good (used), Year of construction: 2002, Machine is in good condition. Parts shown by hand not come. Kodpfxetwpamo Addsll

Condition: excellent (used), Year of construction: 1999, Used Large Format Trumpf 500r 1600 throat Cnc Punch Press For Sale TRUMPF TRUMATIC T500R Large format rotation cnc punch press for sale This machine will process 3metre x 1.5metre sheet without a reposition. Trumpf uk specification: Brand: TRUMPF Model: TRUMATIC 500R Type: CNC Punching Machine Control: Bosch CC220 Punching force (ton)22 Capable of taking multi tool Kedpfx Adetltl Hedjll Trumpf TC 500R Turret Punch 3000 X 1500mm large format machine 1600 throat x 3metre rail. TRUMPF TRUMATIC 500 CNC PUNCH WITH CONTROL & AIR TABLE CAPACITY: 220KN SERIAL YEAR: 1999

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 193 34-41, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,600 mm, table load: 2,500 kg, spindle diameter: 102 mm, spindle speed (min.): 4 rpm, spindle speed (max.): 1,600 rpm, total height: 3,500 mm, total length: 6,500 mm, total width: 4,700 mm, table length: 1,400 mm, table width: 1,250 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, The machine was overhauled and modernized in 2025 and is immediately ready for operation! Travel paths: Kjdpow Rn R Rofx Addoll - Table cross travel (X-axis): 1600 mm - Spindle head vertical travel (Y-axis): 1250 mm - Table longitudinal travel (Z-axis): 1475 mm (restriction due to large table) - Quill travel (W-axis): 710 mm - Table rotation (B-axis): 360 degrees Clamping table: - Clamping surface: 1250 x 1400 mm - Table load capacity: 2.5 t Spindle: - Diameter: 102 mm - Tool holder: DIN2080, SK 50 - Infinitely variable speed: 4 – 1600 rpm - Drive power: 13 kW Feed: - X, Y, Z axes, stepless: 1 – 4000 mm/min Rapid traverse: - X, Y, Z axes: 4 m/min Power consumption: 42 kW Weight: 10 t Space requirements (L x W x H): 6.5 x 4.7 x 3.5 m Equipment: - Heidenhain TNC 320 - Coolant device

Condition: excellent (used), Year of construction: 2016, travel distance X-axis: 2,400 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 810 mm, CNC HEIDENHAIN iTNC 530 X/Y/Z 2,400/1,500/810 mm Kljdpfx Ajq Rcu Ejddsl retrofitted 4th axis 12,000 min-1, 40 kVA, , traverse paths weight 7.800 kg Table with vacuum plate with BORNEMANN 960 suction unit

Condition: used, Year of construction: 2015, controller manufacturer: Hurco, controller model: MAX5, _____ Description: Year of manuf. : 2015 Control : Hurco MAX5 Speed : 10000 rpm Ksdpfx Asxz I A Hoddsll Movement X/Y/Z : 762/508/610 mm Tool holder : SK 40 In General: Year of manufacture:2015 Control system:Hurco MAX5 Travel X/Y/Z:762/508/610 Speed:10,000 rpm Spindle: Technology:Belt spindle Speed:10,000 rpm Tool holder:SK 40 Work table: Clamping surface:1,020 x 510 mm Maximum table load:1,300 kg : Tool magazin: Technology:Drum magazine Tool changer:Double gripper Number of stations:24 Max. tool diameter:81 (120) mm Max. tool length:300 mm Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system NC rotary table:4th axis (A-axis) Tool magazine:30 stations Tool measurement:Renishaw measuring probe