ORMA C4 Hydraulic Shelf Press

ORMA c4

Condition: excellent (used), Robland 3200 silver line format saw with a trolley scoring saw with a separate engine, trolley length 320cm main engine 7KW 3 speeds max disc 450mm 0-45 tilt electrically adjustable with readout up-down saw electrically adjustable without readout culaga on the right side motorically adjustable up to 1240mm digital readers on the culaga on the trolley angle device included Iedov S Hy Aepfx Abvsap Branded machine in very good condition,

Condition: excellent (used), total width: 1,300 mm, total length: 3,500 mm, overall weight: 7,000 kg, operating pressure: 300 bar, transport width: 1,600 mm, transport height: 2,350 mm, transport length: 4,350 mm, Simimpiantin Shelf Press for Veneering 3500×1300 Shelf length: 3500 mm Shelf width: 1300 mm Two loads Press with 8 cylinders Shelves heated with water from central heating Max. working pressure: 300 bar Piston diameter: 80 mm Ijdpfx Abjxxpgbovsap Machine weight: 7000 kg Machine dimensions: 435×160×235 cm (H)

Condition: used, Year of construction: 2004, machine/vehicle number: P 04-09-002, neu U05 10 001, Spraying machine Venjakob VEN SPRAY-K All pictures only for example - Producer Venjakob - Year of construction 2004 - Current condition: not refurbished - Offer price for refurbished condition - Working width 800 mm (1000) mm - Operating side, right - Duo gun drive system - Dry filter system 4.000 m³/Std. - Diameter exhaust air pipe 400 mm - Transport belttransport System - Feed speed adjustable 3 - 8 m/min - Lacquer reclaiming system with v-belt - Gun control system LS 1 - Number of installed lacquer circles 1 Stk. - Airless spraying system 4 Stk. Krautzberger KAA 1300 - Number of lacquer pumps 1 Stk. - Producer lacquer pump Wagner 35-70 - Suitably for solvent based lacquer - Suitably for water based lacquer - Total connection power 7 kW, Stromaufnahme 17 A , Absicherung 35 A - Location, on stock - Voltage fluctuation max. +/- 5 % _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. Iedoumvr Tspfx Abvjap For further information, get in touch with us!

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 0 278 06 1192, film width: 700 mm, roll diameter: 700 mm, Used Friz rotary cutter. 1 set of blades has been resharpened. The machine is used and is sold without warranty. Inspection is possible and welcome. Isdsv Radxjpfx Abvjap Loading facilities available.

Condition: ready for operation (used), Year of construction: 2025, This 3-axis QUICK CNC UE-481 was manufactured in 2025. It features a 1300 x 2500 x 200 mm working area, a 9 kW high-performance spindle, and a linear tool changer. The vacuum table has 6 zones, complemented by a Becker 250 m³/h vacuum pump. It includes a 3-sided safety fence with a front light barrier, tools, and dust extraction. If you are looking to get high-quality CNC routing capabilities consider the QUICK CNC UE-481 machine we have for sale. Contact us for more information. Application Types Iodpfx Ajx D Dnqsbvoap CNC Wood Machining

Condition: new, functionality: fully functional, planing width: 530 mm, number of planer blades: 4, Equipment: motor brake, Houfek R 530 surface planer - 400V/50Hz, 5.5 kW (7.5 HP), width 530 mm 1.1 Motor 5.5 kW (7.5 HP), Tersa cutterhead 1.2 Total work table length 3100 mm 1.3 Dimension of the guide ruler 1300x150 mm with tiltable auxiliary ruler 1.4 Planed table 1.5 Upper control panel with ELGO Z60 digital display Electronic adjustment of the take-off 0 - 7 mm Tilt angle of the tiltable ruler 0°- 45° - Digital display Adjustment of the input table inclination (pointed/hollow joint) 1.6 Cover for the SUVAMATIC planing roller Iasdpfsu Rnqqox Abvsp 1.7 4-knife planing roller D=120 mm 1.8 Automatic star/delta start of the motor 1.9 Electromagnetic brake 1.10 Suction nozzle with outlet D=150 mm 1.11 Blade setting gauge 1.12 Voltage 400V/50Hz 1.13 Packed in PE film as standard 1.14 Machine built according to CE power and safety standards

Condition: excellent (used), Working width 500mm Motor power kW 4 Iasdpfx Aett I E Iobvop

Year of construction: 2006, condition: good (used), FIN Glue spreader SC2R/1300 with 2 rollers The year 2006 manufacture: FIN s.r.l. Italy main technical specification: Width of working: 1300mm The maximum passage between roller: 120mm The diameter of rollers: 185mm Advancement speed: 19m/min Net weight 390 Kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 200 x 153cm 400 V, 50 Hz, 037 kW Accurate and uniform spreading with any type of glue, excellent technical characteristics, added to the high practicalness, functionality and safety for the operator, place it at the Iaedpfxofgunte Abvsp forefront among the 2 roller glue spreaders. Spreading roller covered in antiacid rubber, ground and furrowed, hard wearing, as they are built with a rational layer of rubber it is, therefore, possible to carry out 6-7 grindings. It is easy and quick to disassemble. Spreading, precise and uniform on one or both sides of the panels. Special shock-absorbers, on the roller supports, allow the rollers an automatic opening depth, so as to spread panels of different thickness within 5 mm. they also compensate for eventual parallelism differences of the panel. Uniform glue dosing by a rectified distribution tank, in sheet-iron, with very quick extraction to allow cleaning. Collecting tank, for glue and washing water, in galvanized sheet-iron, extractable for easy cleaning. Safety protections, in sheet metal on the rollers and glue distribution tank, a sheet metal protection prevents the introduction between the rollers of any object more than 5 mm. thick over the transit established, ensuring the maximum safety for the operator. Electrical installation, in a waterproof case with fuses, thermal switch for motor and transformer protection. Control panel, with starting button, stopping button and warning light (24 V). Rollers rotation chain with self-registrable turnbuckle pinion. Roller washing with a bored washing tube, for the water intake during this operation.

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with emptying function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking and integrated length control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer edging coils, as well as fixed lengths from 0.4–3.0 / 6.0 mm and workpiece heights from 8–60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. ● 3 free slots for finishing units ● 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8–60 mm Min. workpiece width: approx. 75 mm Iaodpfx Abow I U Drovop Min. workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0–2.0 mm, stepless adjustment Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: Surcharge for radius scraper unit with air nozzle + extraction Surcharge for surface scraper unit + extraction Surcharge for buffing unit EVA/PUR glue pot with emptying function Surcharge for diamond tools, height = 65 mm for pre-milling unit Riepe spray system (anti-adhesive) at the pre-milling unit Riepe spray system (cleaning spray before buffing unit) Pipe system with 90° bend + manual slide valve, installed on machine, D=200 mm Availability: short-term Location: Hochheim

Condition: good (used), The scope of delivery includes: 01x back wall grille, used material color: cream white total width: approx. 1.100 mm total height: approx. 1.000 mm mesh size: approx. 60 x 50 mm Frame profile dim. (width): approx. 20 x 20 mm Frame profile dim. (height): approx. 15 x 15 mm wire thickness: approx. 3,00 mm Iodpfx Abjm E I I Ujvjap weight/pc.: approx. 3,90 kg Internal designation: RW-1