Bar pointing/chamfering machine

PAREX

Year of construction: 2020, condition: new, Available from stock Strip dimensions: 4420 x 34 x 1.1 mm Cutting capacity (square): 360 x 400 mm Cutting capacity (round): 360 mm bundled cutting: 180 - 280 x 50 - 160 mm Cutting speed: 35 - 85 m/min Motor power main drive: 3.75 kW Engine power hydraulic pump: 0.75 kW Motor power coolant pump: 0.125 kW table height: 755 mm Crjdsiryf Sopfx Aaaoa Weight: 1680 kg Dimensions W x D x H: 2400 x 2120 x 1840 mm

Condition: used, Thread rolling machine ORT RP30U 2-roll Cedpfx Aot H Ty Usaasra 30 ton swiveling heads variable speed drive #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior Power (Ton): 30 Number of rollers: 2

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 18,5 kW ✔ Shaft length: 550 mm ✔ Shaft diameter: 260 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 14 Credpfoiq U A Sex Aaaja ✔ Granulation: 10-30 mm ✔ Capacity: up to 4 m3/h* ✔ Material discharge opening: 160 mm ✔ Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) ✔ Filling opening: 939 x 567 mm ✔ Dimensions L/W/H: 1,88/1,12/1,67 m ✔ Weight: 1250 kg 2 years warranty or 2000 working hours

Condition: used, Year of construction: 1999, swing dia. 680 mm max. turning diameter 429 mm turning length 440 mm control MORI SEIKI - MSC-501 turning speeds 5.000 U/min max. bar material dia. 56 mm travel -x axis 233 mm travel -z axis 510 mm number of tapers in turret head 2x12 CNC Turning- and Milling Center | MORI SEIKI - ZL-150SMC equipped with main/counter spindle, c- axis, 2x turret for driven tools, bar feeder and chip conveyor. The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. Crodpfx Aowpluloaasa - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZL 150SMC | ZL150SMC | ZL-150 SMC | ZL 150 SMC

Condition: good (used), Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: Crjdpfxsi Eg Nks Aaaja -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Csdpfx Aod Nw Ttjaaera Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: SL154SY, turning length: 750 mm, turning diameter over cross slide: 510 mm, turning diameter: 680 mm, spindle motor power: 7,500 W, spindle speed (min.): 50 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 56 mm, travel distance X-axis: 215 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 550 mm, mount diameter: 20 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 6,000 m/min, rapid traverse Z-axis: 24,000 m/min, rotational speed (max.): 3,000 rpm, rotational speed (min.): 20 rpm, type of input current: three-phase, feed length X-axis: 215 mm, feed length Y-axis: 70 mm, feed length Z-axis: 550 mm, torque: 70 Nm, bar passage: 56 mm, total height: 2,015 mm, total length: 3,336 mm, total width: 1,873 mm, Equipment: rotational speed infinitely variable, MORI SEIKI SL154SY LATHE WITH LNS BAR FEEDER RENISHAW LASER CHECKED Credpfx Aajxddfvoaea TOOLBOX. MACHINE INSPECTED AND READY TO WORK IN OPTIMAL CONDITIONS.

Year of construction: 1960, condition: refurbished (used), machine/vehicle number: 1733, Vertical internal broaching machine with switching plate of the company Karl Klink Type: RSI10DT Machine No.: 1733 Year of manufacture: 1960 weight: 4,9 to broaching force: 10.000kg With switch plate ( 2 stations ) Power supply: 380V / 50Hz Cedogyd S Sjpfx Aaasra Rated current: 35 A Connected load: 7,5 kW The machine is completely revised and is therefore in a very good condition.

Year of construction: 1962, condition: good (used), machine/vehicle number: 1083, Broaching Machine - Vertical Manufacturer: Rausch Type: RS10/915 Machine number: 1083 Year of manufacturing: 1962 Force: 10 Tons Stroke: 915 mm Csdpfxefc T Eue Aaaera System DIN 1415 With pedestal for upper-floor positioning

Condition: good (used), turning length: 500 mm, turning diameter: 300 mm, spindle bore: 62 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 520 mm, Mori Seiki SL-15 CNC Turning Center Machine Type: CNC Turning Center (2-Axis) Serial Number: 1899 Control System: Mori Seiki MSC-516 Maximum Turning Diameter: approx. 300 mm Maximum Turning Length: approx. 500 mm Swing Over Bed: approx. 510 mm Axis Travels X-Axis Travel: approx. 210 mm Z-Axis Travel: approx. 520 mm Spindle Nose: A2-6 Spindle Bore: approx. 62 mm Maximum Spindle Speed: approx. 4,000 rpm Spindle Motor Power: approx. 11 / 15 kW Tool Turret: 12-Station Tool Size: 25 × 25 mm Equipment & Features Hydraulic Tailstock Tool Presetter Credpfjx Hp Ikox Aaasa 6.5" 3-Jaw Power Chuck Coolant System Machine Weight: approx. 4,000 kg Machine Dimensions (L × W × H): approx. 2,700 × 1,600 × 1,700 mm