Lathe - cycle-controlled

PINACHO SM/200

Condition: good (used), Three-phase motor, electric motor -Power: 5.5/8/22 kW -Speed: 740/975/1475 rpm -Shaft: Ø 55 mm Kdsdpfxod E Tfno Am Eek -Construction: B3 -Protection class: IP 33 -Dimensions: 750/510/H390 mm -Weight: 275 kg

Year of construction: 2001, condition: used, Cazeneuve Maxica 590 With collet Kedsh Aylvjpfx Am Esdk Control: SOMAB NUM SP + S 5

Year of construction: 2003, condition: ready for operation (used), Travel X/Z: 210mm/610mm, Travel Y: +/-40mm, Swing over cross slide: 360mm, Spindle bore: 65mm, Tool stations: 12, Tool holder: VDI30, Speed: 4000rpm, Rapid traverse: 24m/min, Feed force: 5000Nm. Machine dimensions X/Y/Z: approx. 4000mm/2500mm/2500mm, Weight: approx. 6000kg, Control: Siemens Sinumerik 810D, Operating hours: 4894h. Including oil cooler, parts catcher, power chuck Kitagawa BB08, collet device, turning tool holders and boring bar holders. Documentation available. An on-site inspection is possible. Kdedoxuvn Dspfx Am Eek

Condition: good (used), Spindle diameter: 80 mm Kedephl Ecspfx Am Eedk Spindle nose: SK50 Spindle speeds: 11 - 1000 RPM X-axis movement: 1700 mm Y-axis movement: 1800 mm Z-axis movement: 1800 mm Spindle out (W-axis): 710 mm Table size: 1100 x 900 mm Elbo Digital readout: On Y-axis and Z-axis Featured with: - Turning table - Toolholders Spindle engine: 7,5 KW Machine LxWxH: 5100 x 2650 x 3300 mm Machine weight: 10 Ton

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev Kdjdpfeirax Uex Am Esk -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: good (used), Year of construction: 1996, Weinig Unimat 23 four-side planer - German production - grooved top - year of production 1996 Ksdpfx Amjh Dwl De Ejdk - pulling rollers in the table top TECHNICAL PARAMETERS: planed width 230 mm planing height 160 mm grooved top spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 lower spindle 7.5 kW feed smoothly adjustable 6-36 m / min 5.5 kW feed motor power six top steel pulling rollers two upper rubber pulling rollers three pullers in the table top pneumatic feed pressure pneumatic shoe clamp spindles with brakes pre-table length 1970 mm electric height adjustment central lubrication (split) diameter of nozzles 140 mm dimensions of the machine (length / width / height) 410/200/180 cm weight ~ 3000 kg

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Number of Drilling Units 1 Vertical Motor Power 22 kW Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Max. Drilling Capacity (mm) Ø40 mm Kdjdpegbfaxofx Am Esk

Condition: good (used), Year of construction: 2012, Parts shown by hand not come. X1020mm Y610mm Z610mm Kjdpfxsx Awzbe Am Esdk 12.000 rpm,25 KW, 160Nm Control unit: HEIDENHAIN iTNC 530, 4th axis will come without parts shown by hand.

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 0 278 06 1192, film width: 700 mm, roll diameter: 700 mm, Used Friz rotary cutter. 1 set of blades has been resharpened. The machine is used and is sold without warranty. Inspection is possible and welcome. Kdjdpfx Aov Radxsm Eek Loading facilities available.

Condition: new, Year of construction: 2026, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. For every piece of aluminium you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new aluminium stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: Kdsdpfxof Ekn Dj Am Ejk • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Model: A550 Length: 6 m Linear Unit: ProfiStop Alpha Material Length: 4680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.