Laser cutting machine

Prima Industrie Zaphiro 5 kW

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR Gjdpfetrd T Tox Aadjin 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: good (used), functionality: fully functional, Year of construction: 1989, number of rollers: 3, Over roll 280mm, 12mm Prebending, capacity 18mm 3x top roll diam. Gisdpfx Aajwtp Haodjn Weight 7,100kg

Condition: used, mileage: 101,234 km, lifting height: 59,100 mm, Year of construction: 2017, operating hours: 1 h, General information Field of application: Construction Serial number: Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 8.000 kg Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 16.85x2.75x3.99 Gisdpovl Dl Aefx Aadjn Additional information Please contact PFEIFER GROUP for more information

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Gijdjlhwr Rjpfx Aaden Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 50 h, functionality: fully functional, A welding robot system is for sale with the following contents: Gisdpfx Aasv Dvllsdon Elite Robot CS620 (1750mm range) with programming flange and software Fronius TPSi 500 Positioner rotateZERO 500 with 1800mm x 800mm intermediate frame Machine frame System is ready for welding immediately

Condition: used, functionality: fully functional, Year of construction: 2006, 1 used concrete mixing plant Manufacturer: Liebherr Type: Betomix 1.0 Year of construction: 2006 Capacity/h : 60 m³/h compacted concrete Aggrgate inline silo: 120m3 (4 x 30 m³) Mixer: Liebherr ring pan mixer 1.0 Giedpjwk Hxhefx Aadon Dosing: Aggregates: by weighing belt Cement: cement scale Water: water dosing hopper, Admixtures: Chemical scale / chemical dosing device Control container: include control system: SIMMA silos: 3 X 100to (Transport dimension D=3m, feet can be unscrewed) INCLUDING VARIOUS SPARE PARTS AVAILABLE IMMEDIATELY PRICE INCLUDE DISMANTLING offer and all price are net and ex stock without guarantee and/or guarantee, mistakes and/or false representations reserve, purchasing like see / how is it – standing or recumbent, subject prior sale IT IS FORBIDDEN TO COPY OR PUBLICATE THIS OFFER BY ANY THIRD PARTIE OR THIRD PERSON

Condition: used, Year of construction: 1977, bore capacity in steel (diameter) 75 mm Gedpfx Aaet Hw Uvjdein arm length 1700 mm workpiece height max. 370 - 1700 mm total power requirement 12 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m C S E P E L (Hungary) Radial Drill Model RFh 75/2000 Year 1977 Serial No. 61158 _____ Drilling capacity, Steel / Cast Iron, max. 75 / 90 mm Thread cutting Steel / Cast Iron M 60 / 70 Distance between column and spindle centre, max. 1,700 mm Spindle taper ( Morse Cone) MK 5 Vertical stroke of radial arm 380 mm 21 Spindle speeds 19 – 1.900 rpm Base plate 1.100 x 2.300 mm Mounting height, min./max. (base plate) 370 / 1,700 mm Swivelling radius +/- 180 ° Vertical adjustment of radial arm 950 mm Horizontal adjustment of drilling slide 1.500 mm 12 Drilling feeds 0.047 - 2 mm/rev Spindle drive, approx. 10 kW Total electrical load 12 KW - 380 V - 50 Hz Weight 7.000 kg Accessories / Special Features: * Preselector for the Spindle speeds, hydraulically actuated * Choice of Feed rate mechanically * Drilling with or without infeed, respectively manually by a fine feed device/resp. by handwheel * Drill head slide adjustable on radial arm manually, vertical Radial arm adjustment Motorized. * Depth of infeed adjustable by stop dogs on quill dial, with automatic return of quil after stop of infeed * Electro-mechanical clamping of the radial arm and the drillhead via switch * Coolant equipment built in the lower table plate, VOGEL Central lubrication * Built-on cubic table, approx. 600 x 1,200 x 300 mm. This machine is ideal for steel work, tool work, and mechanical engineering. Condition : average to good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), mileage: 104,000 km, power: 368 kW (500.34 HP), first registration: 07/2019, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2019, operating hours: 2,630 h, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fridge, navigation system, parking heater, power mirror, retarder, = Additional options and accessories = - Aluminum fuel tank - Low noise - Speed limiter - Intarder - Air suspension - Air horn - Sun visor - Auxiliary heater - Toolbox - Xenon lighting - Power take-off (PTO) - Central lubrication system = Additional information = Axle configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Suspension: Air suspension Rear axle 2: Twin tires; Lift axle; Suspension: Air suspension Weights Unladen weight: 25,475 kg Payload: 13,525 kg Gross vehicle weight (GVW): 39,000 kg Functional Crane: HMF 9520-K7 + JIB FJ 2200-6, year of manufacture 2019, mounted behind the cab Body brand: HMF 9520-K7 + JIB FJ 2200-6 Giodpfxsv Tmylo Aadon CE marking: Yes Condition Technical condition: Very good Visual condition: Very good Financial information Price: On request

Condition: new, functionality: fully functional, Year of construction: 2024, laser hours: 1,500 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 14 mm, sheet thickness copper (max.): 14 mm, input voltage: 400 V, compressed air connection: 7 bar, warranty duration: 60 months, Equipment: cooling unit, safety light barrier, Fiber laser cutting machine for all kinds of sheets. Equipped with automatic nozzle changing and one-click processing functions, the P series is competent for all cutting demands. The special fiber laser nozzle and cutting process ensure faster oxygen cutting of carbon steel, more gas-saving low-pressure nitrogen cutting of stainless steel, and better quality air cutting of carbon steel. The fiber laser heads are able to detect protruding obstacles to effectively reduce the damage rate and save the maintenance cost of the laser cutter. With one-click processing, one laser machine is capable of processing multiple sheets in batches with a single setting, achieving batch processing. Condition: New Laser type: Fiber laser Laser power: 6000W Cutting area: 3048*1524mm - 6100*2500mm Cutting speed: 200m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Supported graphic format: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling mode: WATER COOLING Giedpfetrvpxox Aadon Suction filter: ECO6 CTS 9 Kw Available for immediate delivery

Condition: good (used), Year of construction: 1998, stroke length: 215 mm, pressing force: 150 t, working length: 3,100 mm, Completely rebuilt machine. New Cnc: Step Automation Rock 15 (Touch Screen and 2D) Bending length: 3100mm Gsdpfx Aouc Txzeadein Force: 150tn 6 axes (Y1, Y1, X, R, Z1, Z2) Travel/Travel: 215mm Delivered with complete set of 3 meters of punches and dies. *Machine in the process of retrofitting, new cnc to be installed.