Universal lathe

Schaublin 150

Condition: excellent (used), functionality: fully functional, center height: 150 mm, center width: 630 mm, spindle bore: 40 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 14 rpm, overall weight: 1,500 kg, Equipment: rotational speed infinitely variable, Schaublin 150A Lathe Specification Manufacturer: Schaublin Model: 150 Year: unknown Control: conventional Max. turning diameter: 340 mm Distance between centers: 630 mm Iodox Ddamspfx Ah Ueik Main spindle Speed: 14 to 3000 rpm Spindle mount: Camlock D1-4" Collet mount: Schaublin B32 Extras Multifix B plus 5 tool holders 3- and 4-jaw chuck Tailstock Collet set B32 Coolant system Heidenhain DRO (ND780, 3 axes) Machine lamp Reduction gearbox Quick-clamping device Etc.

Condition: like new (used), Year of construction: 2017, operating hours: 3,800 h, functionality: fully functional, Controller FANUC 31i Model B5 Table size 850 x 410 mm Iiodpfx Ahextwxho Uek Max. table load 300 kgs X travel 700 mm Y travel 400 mm Z travel 330 mm A axis C axis 0 - 360 degree Distance between table surface and spindle end 250 - 580 mm Max. tool length 250 mm Max. tool diameter D80 mm Max spindle speed 24000 rpm Rapid speed X/Y/Z 54 m/min Feedrate 30 m/min ATC magazin 21-fold Tool holder type BBT30 Weight 2300 kgs Accessories, featureies - 4/5 axis with round table - RENISHAW TS27 tool presetter system - RENISHAW OMP60 zero point setting system - Chip conveyor - Coolant unit - Manuals The machine has been used little and the condition is like new. Ready to buy.

Condition: excellent (used), Very good condition + lots of accessories Isdsw R E Tcopfx Ah Usik

Condition: used, functionality: fully functional, Schaublin 150 High-Precision Lathe with 2-Axis Digital Readout ND780 Technical Specifications: >> Year of manufacture: approx. 1980 >> Centre height: 150 mm >> Distance between centres: 630 mm >> Swing over bed: 340 mm >> Spindle nose: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025–0.35 mm/rev >> Metric threads: 0.25–14 mm >> Tailstock taper: MK3 >> Infinitely variable spindle speeds: 55–3000 rpm >> Rapid traverse motor: 1500 rpm >> Total power requirement: 4.45 kW >> Weight approx. 1200 kg Accessories: >> 160 mm 3-jaw chuck, 1 set of jaws >> Multifix B, 3 holders >> Collet chuck system with collets >> Change gears >> Stops >> Coolant system >> 1 box of change jaws >> Centre points >> Operating manual Iiodpfxswynluo Ah Ujk About the machine: For sale is a Schaublin 150 High-Precision Lathe. The machine is operational, features rapid traverse, and is in good used condition. You are welcome to inspect the machine under power on site and see its condition for yourself.

Condition: used, Saimp KS Iron Lathe. Ijdpfx Ahev Sth Ho Usik Max piece length 1000mm

Condition: like new (used), Year of construction: 1997, functionality: fully functional, center height: 150 mm, center width: 630 mm, spindle bore: 40 mm, turning diameter: 340 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 55 rpm, overall weight: 1,450 kg, Schaublin 150A Draai bank Specificatie Manufacturer Schaublin Type 150 Year of manufacture 1997 Besturing conv. Isdpfxjwgd R Hs Ah Ujik Max draaidiam. 340mm Distance between centers 630 mm Hoofdspil Toerental 55 tot 3000 omw/min Opname Camlock D1-4" Spantangopname Schaublin B32 Extras Multifix B plus 7pcs reedschaphouders 3 and 4 klauw Tegencenter Spantang set Koelmiddel inst. Heidenhain DRO (2-aces) Machine lamp Conusliniaal Fast chip installation Vaste en meelopende bril Enz.

Condition: excellent (used), Year of construction: 2017, operating hours: 7,000 h, * 7,000 hours Iedpfx Ahsxx Sh Ie Uoik * Operating weight 8,500 kg * Hydraulic rotatable quick coupler * Load hook * Hammer and grab piping * Air conditioning * Steel tracks with rubber pads * Excellent condition

Condition: refurbished (used), Year of construction: 2024, operating hours: 4 h, functionality: fully functional, Equipment: documentation/manual, For sale is a fully renovated TORNOS DECO 20 type longitudinal lathe. The renovation was carried out by Tornos specialist service with factory parts and covers the following units: - painting of coverings - replacement of all ball screws - replacement of all linear guides - replacement of all cables and cable ladders in the machining area - replacement of the entire pneumatic system - replacement of the entire coolant system - replacement of all axis servomotors - renovation of all spindle motors - main and control spindle renovation - renewal of rotating guide bush and synchronous drive Iodpfxeuq A T Ss Ah Usik - refurbishment of Fanuc control and servo amplifiers - power elements, partial replacement of electrical components Description TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25.4 [mm] - Max. machining length : 220 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] (5,5kW) - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 25,4 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 1,5 [kW] (2,2 kW) - C axis indexing precision : 0.1 [°] CROSS SLIDE 1 - Number of positions : 5 CROSS SLIDE 1 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] - Live tools power: 1,5/2,2 kW BACKWORK UNIT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2270 x 1650 [mm] - Machine height : 2200 [mm] - Machine weight : 3500 [kg] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 Horizontal (8000 1/min 1,5/2,2kW) - Rotating guide bush (syncronised) - Parts catcher - Ejection of workpiece - Coolant tank - Bar loader LNS ALPHA 320S OPTIONAL: Long piece ejector device (max. workpiece lenght 700mm) OIL MIST EXTRACTION – SEI EMC 1000 with stand or. ELBARON RON 100 D2TR The equipment has been almost completely renovated and is in perfect and new condition. It has a long piece ejector and a new LNS bar feeder, it can optionally be equipped with an oil mist separator and other accessories, which we can also provide. If you are interested, we will provide you with additional information and pictures. The longitudinal lathe can be viewed at our site in Hungary, even during operation, at a pre-arranged time.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, turning diameter: 500 mm, DMG CTX Beta 1250 TC 2009 Iedpfxjv N Hc Se Ah Ujik

Condition: used, Year of construction: 2001, Technical data: Tool holder: SK 40 Travels: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Max. Tool weight: 260 kg Spindle speed: 12000 1/min Max. Table load: 380 kg Weight, approx.: 6500 kg Dimensions (DxWxH), approx.: 2000 x 2200 x 2400 mm Equipment: - Control Heidenhain TNC 430 Iodet Hr Ahopfx Ah Uoik - 4-axis from SMP (France)