Dowel drilling machine Scheer DB4

Scheer DB4

Condition: refurbished (used), Year of construction: 1996, operating hours: 350 h, functionality: fully functional, Universal Dowel Hole Boring Machine DB 4 This used SCHEER Universal Dowel Hole Boring Machine DB 4 has been functionally tested (not newly painted). Worn parts/seals have been replaced, and the machine geometry was reset to ensure the highest precision. The SCHEER Universal Dowel Hole Boring Machine DB 4 is specifically designed for construction drilling, for series drilling in the 32 mm grid system, and for drilling fittings of various kinds; it enables all these tasks to be performed quickly, precisely, and with minimal setup times. Easiest operation via symbols and 4 program preselection controls for switching to new working processes in seconds. Central adjustment of the removable side stops always ensures flush alignment at the front edge for precise drilling of left and right workpieces. It does not matter whether the parts are cut to size or in square. The dowelled corner connection is always flush—both at the edge and at the CNC machines—just as simply and quickly as with a SCHEER DB 4. Safety clamping device across the entire table width, clamping of workpieces directly at the drilling bar. Stop rail with three adjustable flip-stops. Continuous table supports facilitate feeding and drilling of long workpieces; foldable workpiece support tables make series and fitting drilling easier. 2 drilling units Drilling motor Type BM 602-230/400 Volt, 50 Hz, n = 2860, 2.2 kW power 25-spindle attachment gearbox Spindle spacing 32 mm (other spindle spacings on request) For surface and face drilling. The vertical drilling unit is equipped with an oil brake for tear-free drilling of series holes. The control cabinet of the machine has been completely rebuilt and converted to the new SIEMENS LOGO control system. This ensures the operational safety of the machine for the future! Fjdpfxswq S E He Ab Uopr Portal passage: max. 950 mm Working length: max. 2360 mm With pneumatic comb adjustment

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 690924, Connected load 380V 1,84kW speed 2840 rpm number of spindles: 21 pieces, pitch 32 mm spindle distance 640 mm spindle rotation direction 11xright 10xleft M10 thread 2x safety clamps Fedpfxjh U Dams Ab Uopr pneumatic foot valve table size 880 x 400 mm 1x side stop with 2 folding stops 1x basic fence 1x miter fence Unfortunately, we cannot answer inquiries without complete contact information.

Condition: like new (used), This used SCHEER DB 4 universal dowel boring machine has been functionally tested, worn parts have been replaced and the machine geometry has been readjusted to ensure maximum precision. The SCHEER DB 4 universal dowel hole drilling machine is specially designed for drilling construction holes, for drilling holes in rows in a 32 mm grid system and for drilling a wide variety of fittings; it enables all these tasks to be carried out quickly, precisely and without long set-up times. Extremely simple operation via symbols and 4 program preselection controls for changing over to the new work process in seconds. Central adjustment of the removable side stops, therefore always flush at the front edge, precise drilling of left and right workpieces. It does not matter whether the parts are cut to size or at the correct angle. The doweled corner joint is always flush, both on the edge and on the surface! No CNC machine can achieve this as easily and quickly as a SCHEER DB 4. Safety clamping device across the entire table width, clamping of the workpieces directly on the drilling beam. Stop rail with three adjustable folding stops. Continuous table supports make it easier to push through and drill long workpieces, fold-up workpiece support tables facilitate line drilling and hardware drilling. 2 drilling units Drill motor type BM 602-230/400 Volt, 50 Hz, n= 2860, 2.2 kW output 25-spindle attachment gearbox Spindle pitch 32 mm (other spindle pitches on request) For surface and face drilling. The vertical drilling unit is equipped with an oil brake for tear-free drilling through rows of holes. The control cabinet of the machine has been completely rebuilt and converted to the new SIEMENS LOGO CONTROL. This ensures the operational safety of the machine for the future! Gantry passage: max. 950 mm Fjdeu Rqi Aopfx Ab Uopr Working length: max. 2360 mm

Condition: used, Type: DB 5 Condition: function-tested, very good, used - drilling gear with 21 spindles, pitch 32 mm - unit swivels up to 90 degrees - motor 2.2 kW - drilling depth max. 80 mm - complete stop system Fjdpfx Abeu Inu Re Uopr

Condition: used, Year of construction: 1995, functionality: fully functional, The extraction system offered here is sold complete with piping and 6 shut-off valves. A detailed list of the pipes is available on request. The extraction system features four collection containers, electric shaking device, and an extra switch cabinet. For self-collection only. Fpodpfxswyp Rxj Ab Uor

Condition: used, Year of construction: 2013, operating hours: 4,131 h, Equipment: all wheel drive, * Driver's suspension seat Fpsdpfxorbcw As Ab Usr * Exhaust behind the driver's cab * Maneuvering jaw ----Construction: ROPS driver's cab heated, rear window heating, Komatsu 4-cylinder diesel engine, 50 KW, 20 km/h, articulated steering, hydrostatic drive, hydraulic quick-change system, 2 additional hydraulic connections, max. dumping height: approx. 2,420 mm. Accessories: 1m³ bucket/weight: 422kg, pallet fork with 2,500kg load capacity. Only sold to businesses. ONLY THE NET PRICE IS PAYABLE FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT + ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice).

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Universal dowel drilling machine with a swiveling drilling unit with fully automatic control with 2 safety pneumatic clamps Drilling gear motor 2.2 kW with 21 spindles Spindle spacing 32 mm with integrated oil damping Height adjustment 80 mm Drilling depth 80 mm Dimensions: 140x88x160 Weight 420 kg Fjdpjkwg Rcofx Ab Uopr Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Condition: fully inspected and serviced Features and technical data: - Includes combination unit with contact roller and sanding pad - Height-adjustable contact roller for calibration - Air-cushion pressure pad controlled by the workpiece - 4-way adjustable grit compensation - Pneumatic belt tensioning device - Rotating texturing brush at the outfeed side of the machine - Sanding width: 1350 mm Fpjdjw R Hh Ujpfx Ab Uor - Sanding belt length: 1900 mm - Passage height: 150 mm - Main motor: 15 kW - Infinitely adjustable feed speed: 2.5 – 12.5 m/min - Infeed roller table - Separate, additional texturing brush - Outfeed roller table - Digital display device for the electrically powered workpiece thickness adjustment - Automatic workpiece thickness adjustment - Extraction sockets: 2 x 200 mm - Feed belt is functional; damaged at one location (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg The images show the machine in a condition prior to inspection! Location: Röllbach Availability: approx. 4–6 weeks after order confirmation

Year of construction: 1983, condition: used, machine/vehicle number: 508323, 21-spindle, pitch 32 mm tool holder M 10 external thread spindle distance max. 640 mm Fpsdpedardxjfx Ab Ujr Gantry passage max. 1056 mm, stop length 2500 mm with 4 swiveling stops drilling unit with motor 2,2 kW drilling head swiveling, drilling from below height adjustment max. 80 mm drilling depth max. 80 mm, ex location Seevetal, as viewed, subject to prior sale