Spindle lathe

Skoda S 2500A/7000

Condition: excellent (used), turning length: 5,500 mm, Make: WEIPERT Type: W1400 Control: R&D MTC3 DBC Turning Length: 5500mm Swing over bed Ø: 1400mm Swing over cross slide Ø:960mm Length: 9000mm Width: 2900mm Height: 2900mm Weight: 32000kg Dcodswzhzljpfx Abusc

Year of construction: 1970, condition: good (used), machine/vehicle number: 528, Capacity (mm): 8x80 Dsdjdv T E Ropfx Abuocc Production (max): 250 ppm

Condition: ready for operation (used), Year of construction: 1995, Mostana 1M63 x 3000mm Gap Bed Centre Lathe Max’ distance between centres 3000mm Max’ swing Over Bed 700mm Djdpfx Abowf Sfvouocc Max; swing over cross silde 350mm Max’ swing in gap 900mm Spindle Bore 105mm Spindle Speeds 10-1250 rpm Spindle Motor 15kW Cross slide travel 400mm Year 1995 Machine complete with: Sony LH70 2 axis Digital Readout Interlocking chuck guard Taper turning through compound slide 500mm 4 jaw chuck 390mm 3 Point fixed steady Rapid power traverse 4 way tool post Change gears coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78739 Machine Serial Number: 1688 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2006, condition: ready for operation (used), A DMG Mori 3-axis precision milling machine is available. Travel X/Y/Z: 200mm/200mm/190mm, speed: 40000rpm, feed: 30m/min, accuracy: 0.001mm. Machine dimensions X/Y/Z: approx. 1800mm/1550mm/1850mm, weight: approx. 2200kg, control: Siemens 840D, operating hours: 4979h, spindle hours: 1041h. The spindle was completely overhauled in 2023. An on-site inspection is possible. Dodpfxjvi N D Sj Abujcc

Condition: good (used), Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: Waldrich -Spare part: comes from a milling machine -Milling head: swiveling -quill stroke: 150 mm -Spindle mount: SK50 Dsdefxlf Aspfx Abuocc -Motor: 11 kW 1470 rpm -Spindle speed: 25 - 560 rpm -Transport dimensions: 1550/600/H460 mm -Weight: 636 kg

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: Dsdorz Nflspfx Abuscc The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: excellent (used), functionality: fully functional, turning diameter: 1,000 mm, turning length: 8,000 mm, total length: 10,500 mm, A used lathe from the Italian manufacturer Leopolod Pontiggia, model NH 500, is for sale. Technical specifications: Turning diameter over bed: 1,000 mm Turning length: 8,000 mm Dcodpfx Aov Epigjbuoc Extensive equipment as in the photos: 1 x 3-jaw chuck 1 x 4-jaw chuck 1 x steady rest + various adapters

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. Dedpfx Aevi Hryebuecc turning diameter max : 1400 mm face plate : 1250 mm Automatic turret head spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Further data see data sheet Machine documentation available . Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition .

Condition: excellent (used), power: 186 kW (252.89 HP), fuel type: diesel, color: yellow, first registration: 06/2021, Year of construction: 2021, operating hours: 1,040 h, = Additional Features and Equipment = - Reversing camera - Power Take-Off (PTO) = Further Information = Technical Specifications Number of cylinders: 6 Dimensions Dimensions (L x W x H): 625 x 290 x 336 cm Weights Unladen weight: 15,000 kg Payload: 10,000 kg Gross vehicle weight: 25,000 kg Functional Bucket capacity: 6 m³ CE marking: yes Condition Technical condition: very good Optical condition: very good Financial Information Price: On request BERGMANN C912S TRACKED DUMPER WITH HYDRAULIC THREE-WAY TIPPER Year of manufacture: 2021 1,040 operating hours Water-cooled 6-cylinder Cummins diesel engine QSB 6.7 Engine output: 180 kW Max. torque: 400 Nm at 2,200 rpm Emission standard: Stage V Drive Hydrostatic travel drive with two-speed planetary gearbox Travel range I: 0–8 km/h Travel range II: 0–15 km/h Weight Unladen weight: 14,850 kg Payload: 10,000 kg Skip Skip volume, struck: 4.7 m³ Skip volume, heaped: 6.5 m³ Three-way tipper Cab Comfort driver’s cab with air-suspended seat Steering wheel or joystick steering Dimensions 6,246 mm x 2,900 mm x 3,360 mm Undercarriage 2 rubber tracks, width: 750 mm CE Declaration of Conformity FOLLOW US ON INSTAGRAM, FACEBOOK AND TIKTOK TO WATCH OUR VIDEO PRESENTATIONS OF TRUCKS/COMMERCIAL VEHICLES AND MACHINERY AVAILABLE FOR SALE WE SPEAK GERMAN Dcjdpfouxypuox Abusc WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: excellent (used), Year of construction: 2018, operating hours: 21,000 h, functionality: fully functional, machine/vehicle number: S4E184001, turning diameter over cross slide: 430 mm, turning length: 670 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, overall weight: 4,300 kg, Used CNC hard turning lathe with counter spindle Manufacturer: EMCO Model: Emcoturn 45E Year of manufacture: 2018 Few operating hours Control: Siemens 828D Number of tools: 12 driven units Dsdpfew Rrvwex Abuscc Max. speed: 0-6000 rpm