Automatic bar lathe

Tornos-Bechler MS-7

Condition: reconditioned (used), BSTA 110H, with BBV 202 /120 feeder Bodpoizi Hmefx Adhjlp Mechanically overhauled. CE-conversion possible. Contact us for details!

Condition: ready for operation (used), Year of construction: 2017, operating hours: 24,140 h, overall weight: 10,000 kg, controller manufacturer: FANUC, controller model: 31i-NT-SmartX, number of axes: 9, This 9-axis Nakamura NTJ100 turn-mill centre was manufactured in 2017, featuring a bar capacity up to 65 mm and dual spindles with maximum speeds of 4500 and 5000 rpm respectively. It includes a Samsys bar loader, Absolent extraction system, and a variety of automated features such as coolant supply through the spindle, parts catcher, and automatic tool setting devices. Consider the opportunity to buy this Nakamura NTJ100 turn-mill centre. Contact us for more information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: han-bei measuring probe for automatic workpiece measurement (infrared or radio type) for left and right spindle • Left + right, with auto swing-in type and 2x 4 measuring directions for quick and precise tool setting via the nc function. • Operating time 43399h • Coolant system: coolant through spindle (CTS); coolant float switch for machine stop on low level; additional coolant flushing via the spindle (left and right) • Bar capacity: Ø 51 mm • Parts catcher type A with collecting tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic lining • Chuck blow-out device for left spindle • Automatic power shut-off • Preparation for oil mist extraction system with connection nozzle Ø 150 mm • Robot/automation prep: pneumatic flap for robot handling on top of the door, opening approx. 400 x 400 mm • Handwheel for manual tracking of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Triple signal lightSamsys bar loader with a 1.5 m bar loading capacity has the following dimensions: Length: 225 cm + 43 cm intermediate guide Width: 120 cm (including loading ramp and control panel) Height: 145 cm or 180 cm with the flap openThe machine was mainly used to process aluminium (95%). Additional equipment • Samsys bar loader, including extension • Absolent extraction system • Slat-belt chip conveyor with interface, time-interval control, and alarm evaluation Blsdpox D Iuzefx Adhsp

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: R14507, Year 2008 with Fanuc 18i-TB With LNS Tryton 107 Country of origin: JP Voltage: 200V 3ph 50/60Hz Dimensions: 141x56x140 cm Net machine weight: 950 kg TECHNICAL SPECIFICATIONS (Standard) Number of axes: 6 Number of spindles: 2 Main spindle Max bar diameter: Ø 7 mm Max machining length: 40 mm Stroke: 40 mm Spindle speed: 16,000 rpm Spindle power: 1.1 kW C axis indexing accuracy: 0.0001° Sub-spindle Max bar diameter: 7 mm Spindle speed: 10,000 rpm Power: 0.5 kW C axis indexing accuracy: 1° Tool post 1 Number of positions: 5 Driven positions: 2 Rotating tool speed: 8,000 rpm Tool post 2 Number of positions: 3 End-working attachment Bodpeya Aq Refx Adholp Number of positions: 3 Sub-operation Number of positions: 3 All technical details are provided without obligation and subject to errors or omissions.

Condition: used, Year of construction: 2014, Manufacturer Citizen Machinery Miyano Co., Ltd., Japan Model BNA 42DHY2 Year of Manufacture November 2014 Serial Number DK4Y1085 Control Fanuc Series 0i TD CNC Machine Type CNC Twin Spindle Turning Center with Y Axis Country of Manufacture Philippines Capacity Bedpfxozmh R Ue Adhslp Maximum Bar Capacity: 42 mm Maximum Turning Diameter: Approx. 42 mm Maximum Turning Length: Approx. 100 mm, depending on workholding Main Spindle: Built in spindle Sub Spindle: Yes Y Axis: Yes C Axis: Main and Sub Spindle Turret: 12 station live tooling turret Live Tooling: Yes Travels X Axis: Approx. 135 mm Z Axis: Approx. 320 mm Y Axis: Approx. ±40 mm Spindle Main Spindle Speed: Up to approximately 6,000 rpm Sub Spindle Speed: Up to approximately 6,000 rpm Spindle Nose: 42 mm bar capacity Rapid Traverse X Axis: Approx. 24 m/min Z Axis: Approx. 30 m/min Y Axis: Approx. 12 m/min Electrical Power Supply: AC 200 V Phase: 3 Phase Frequency: 50 / 60 Hz Rated Power: 30 kVA Full Load Current: 87 A Short Circuit Interrupt Rating: 2.5 kA Machine Weight Weight: 3,100 kg Equipment Visible on This Machine Fanuc Series 0i TD CNC Control Twin Spindle Y Axis C Axis Live Tooling Hydraulic Chuck Coolant System Fully Enclosed Splash Guard Emergency Stop Electronic Handwheel

Condition: good (used), Year of construction: 2004, functionality: fully functional, Fanuc control system, 32 mm spindle bore, Turret with driven tools, Bodpfx Aezqbn Usdhjlp Counter spindle, Tool magazine, High-pressure pump.

Condition: used, Year of construction: 2014, operating hours: 15,934 h, functionality: fully functional, Year 2014 Production hours : 15934 h Swarf conveyor LNS Predisposed for receiving HPpump LNS bar loader Express’220 Parts belt conveyor Fanuc command 321 Model B Bjdpfx Adezmw E Isholp Transformateur

Condition: new, Year of construction: 2025, The machine on offer is a new stock machine. We will be happy to provide you with a suitable quotation. Bljdpfxoychtpj Adhep

Condition: used, Year of construction: 2015, operating hours: 9,779 h, Tsugami HS207-5AX : Year 2015 Production hours : 9779 h Bar capacity 20mm max Swarf conveyor LNS Motorised B-axis LNS barloader Express 320 year 2017 Parts belt conveyor Fanuc command 31i Model B5 Blodpfezmwn Asx Adhep HP pump 90 bars /21l Transfomator

Condition: excellent (used), Year of construction: 2000, fuel type: electric, Diesel compact forklift, manufactured by RMF MAXEIN, type: KSL 70D. Year of manufacture: 2000, lifting capacity: 7 tons. Bodpfxj Tfywe Adhjlp Fork length: 1.4 m, lifting height: 3.6 m. Dimensions: length with forks: 4 m, height: 2.7 m, width: 1.5 m. Hydraulic fork adjustment, triplex mast. Operating hours: 9800 h. Includes a new UVV inspection upon purchase. Ready for immediate use.

Condition: used, CITIZEN CINCOM R 07 VI is a high-precision CNC automatic lathe (Swiss-type) delivering strong accuracy and reliability. Capacities: 6 axes, 2 spindles; max turning Ø 7 mm, max length 40 mm, spindle bore 12 mm; threading up to Ø4 M, max tapping length 40 mm. Specs: spindle 0–16,000 rpm, 1.1 kW; back spindle up to 10,000 rpm, 0.5 kW; C-axis resolution 1°; supply 3x400 V 50 Hz, total power 4 kVA; weight ~950 kg; footprint 1465×560×1410 mm. Accessories: parts catcher, lamp, bar feeder LNS TRYTON 107, central lubrication, status light. Built to achieve tight tolerances; typical applications include automotive, watchmaking, medical, aerospace, and machine-tool components Bsdpjyxnutjfx Adholp