CNC turning automatic lathe

TSUGAMI B0266E-II

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 22012A, spindle speed (min.): 200 rpm, spindle speed (max.): 10,000 rpm, total height: 2,200 mm, total length: 9,000 mm, total width: 1,500 mm, overall weight: 5,000 kg, controller manufacturer: FANUC, controller model: SERIES 32-i MODEL B, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm, TSUGAMI B0266E-II CNC Automatic Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 64 A - Max. bar stock clamping diameter: 26 mm - Max. machining length: 320 mm (synchronously driven guide bushing) - Without guide bushing: 50 mm - Max. drilling diameter: 12 mm - Max. tapping diameter: M10 - Diameter of deep-hole drilling: 10 mm - Max. sub-spindle clamping diameter: 26 mm Hpjdpfx Aex Hxy Aogwea - Max. sub-spindle drilling diameter: 10 mm - Max. sub-spindle tapping diameter: M10 - Max. tool spindle drilling diameter: 8 mm (front/rear tool holder) - Max. tool spindle tapping diameter: M6 (front/rear tool holder) - Max. cutter diameter (tool spindle): 45 mm - Rotating guide bushing: 200 – 10,000 rpm (synchronously driven) - Tool spindle speed: 200 – 6,000 rpm - Total number of tools (standard specification): 31 - Tool size: 16 mm square x 100 mm - Rapid traverse: 32 m/min; rapid traverse in X1 and Y1: 24 m/min; in Y2: 24 m/min - Controllable axes: 6 The machine is equipped with a bar feeder from FMB, type: TURBO 3-36, as well as a chip conveyor. Note: The item must be collected between 04 and 12 March 2026 on a binding date to be agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: used, Year of construction: 2012, Technical details: turning diameter over bed: 20 mm spindle passage: 3-20 mm turning length: 250 mm control: FANUC 31 i-A main-spindle speed: 10.000 1/min subspindle speed: 10.000 1/min Main spindle capacity: 3,7 kW subspindle power: 2,2 kW number of tools: 35 weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,11 x 1,2 x 1,89 m CNC sliding headstock turning/milling centre with B-axis Control system: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power counter spindle: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: Main and counter spindle Number of linear supports: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2,110×1,200×1,885 Weight: 3,300 kg Conversion from long to short turning Deep hole drilling stations NAKANISHI high-speed spindle Rear slide with Y-axis Cross drilling rear side Chip conveyor Fire extinguishing system FMB bar loader Minimag 20, year 2012 Approx. 7.200 working hours Hodpfx Asvivx Njgwopa *

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 22006A, spindle speed (max.): 10,000 rpm, spindle speed (min.): 200 rpm, overall weight: 5,000 kg, total width: 1,500 mm, total length: 9,000 mm, total height: 2,200 mm, controller manufacturer: FANUC, controller model: SERIES 32 i-MODEL B, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm, TSUGAMI B0266E-II CNC Automatic Lathe - Operating voltage: 400 V - Rated current: 64 A - Frequency: 50 Hz - Max. bar capacity: 26 mm - Max. machining length: 320 mm (synchronously driven guide bushing) - Without guide bushing: 50 mm - Max. drilling diameter: 12 mm - Max. tapping diameter: M10 - Diameter for deep holes: 10 mm - Max. sub-spindle clamping diameter: 26 mm - Max. sub-spindle drilling diameter: 10 mm - Max. sub-spindle tapping diameter: M10 - Max. tool spindle drilling diameter: 8 mm (front/rear tool holder) Hpedpfxex Hwn So Agwsa - Max. tool spindle tapping diameter: M6 (front/rear tool holder) - Max. slot milling cutter diameter tool spindle: 45 mm - Rotating guide bushing: 200 - 10,000 rpm (synchronously driven) - Tool spindle speed: 200 - 6,000 rpm - Total number of tools (standard specification): 31 - Tool size: 16 mm square x 100 mm - Rapid traverse: 32 m/min, rapid traverse in X1 and Y1: 24 m/min, in Y2: 24 m/min - Controllable axes: 6 The machine is equipped with a bar feeder from FMB, model: TURBO 3-36, as well as a chip conveyor. Note: The item must be collected between March 4th and March 12th, 2026, on a date to be agreed upon. FCA D-75181 Pforzheim – loaded onto truck

Condition: excellent (used), pressure 0,5 - 20 t max. workpiece diameter 5 - 75 mm threading length 2000 mm pitch in mm 8 mm diameter of roll spindle taper 69,85 Hpedpjvpaa Rofx Agwoa tool diameter 200 mm roll spindle turning speed range 20 - 90 U/min stroke 0 - 20 mm total power requirement 7,5 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 1,9 x 1,1 x 1,2 m

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Hjdouz If Nepfx Agwspa Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: like new (used), Year of construction: 2015, Hanwha CNC Swiss-type Lathe XD20V with Siemens Control, machine is in as-new condition, training machine with approximately 800 hours 840 D SL Year of manufacture: 2015 MAIN SPINDLE Maximum turning diameter: 20 mm Maximum spindle bore diameter: 24 mm Maximum speed [rpm]: 10,000 Maximum power [kW]: 4.3 C-axis with 0.001° resolution Z1 stroke [mm]: 210 Synchronous running guide bush unit Guide bush type: 22.001 / T223 Collet type: 145E / F25 SUB SPINDLE Maximum speed [rpm]: 8,000 Maximum power [kW]: 3.7 Maximum pick-off diameter [mm]: 20 Max. part length ejecting forward [mm]: 80 C-axis with 0.001° resolution Z2 stroke [mm]: 210 Collet type: 145E / F25 TOOLING OPTIONS Tool slide X1, Y1: - Toolholder plate for 6 external turning tools 12 x 12 mm Cross drilling/milling device: - Number: 5 driven drilling/milling spindles, modular - (Tools 2 x ER16 – 3 x ER11) - Power [kW]: 1.6 (S6000) - Front drilling unit for 4 drilling spindles, diameter 25 mm (omitted if B-axis is opted) Sub spindle cross slide - Number: 2 drill holder mounts, diameter 22 mm - Max. drilling depth 100 mm Backworking with Y2 axis - Tool carrier for 8 tools - 4 driven drilling/milling spindles ER16, modular - 4 stationary drilling/milling spindles ER16, modular WORKING AXES AND CONNECTED LOAD Number of servo axes: 6 Number of spindle axes: 2 (3 with B-axis option) Rapid traverses m/min: 40 m/min (X1, Z1, Z2, Y1, X2, Y2) Connected load [KVA]: 15 ACCESSORIES Leveling pads with leveling elements Toolbox and service tool set Work area light Signal tower (3-color) Safety door switch with interlock Maintenance and central lubrication unit (1.8-liter lubrication oil capacity) Coolant flow monitoring Pneumatic blow-off unit for the pick-off collet chuck Manual and documentation in German and English (Including maintenance and operation manual, parameter list, and inspection protocol) CONTROL Control type: Siemens 840 D SL Number of axes: 6 (X1, Z1, Y1, X2, Z2, Y2) Simultaneous 4-axis control Hpjdowzzabspfx Agwja External control panel with handwheel 10.4" color LCD/MDI monitor Automatic PowerOff shutdown function Program check function (test run possible via handwheel) Continuous thread cutting cycle Run time display / parts counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function Interface for bar feeder JBS interface Bar loader magazine: FMB Turbo

Condition: good (used), Year of construction: 1973, pressure 0,5 - 10 t max. workpiece diameter 2 - 50 mm threading length 2000 mm pitch in mm 3 mm diameter of roll spindle taper 54 tool diameter 145 mm roll spindle turning speed range 41 - 129 U/min stroke 0 - 8 mm Hodpfx Asvpaakogwspa total power requirement 4,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 1,3 x 1,2 x 1,2 m

Condition: used, Year of construction: 2015, x-travel 500 mm y-travel 700 mm z-travel 400 mm solution in X-, Y- und Z-axis 0,0001 mm weight of the machine ca. 625 kg dimensions of the machine ca. 1,1 x 1,2 x 2,2 m table load 180 kg workpiece height max. 545 mm table-size 1160 x 730 mm MITUTOYO CRYSTA-APEX S574 Coordinate measuring machine Hsdpfx Aexwp Hrjgwopa Length measuring deviation: 1.9 + 3 L/1000 Measuring range: X-axis: 505 mm Y-axis: 705 mm Z-axis: 405 mm Resolution: 0.0001 mm Traversing speed: 8 - 300 mm/s Speed: 519 mm/s # MCOSMOS v4.2 R4 software runs on PC with Windows 7 Pro # The probe head is a PH10M with attached modules SP25M + SM25-2 / Can also scan

Condition: used, STAR SV 32 is a CNC automatic lathe built for precision, high accuracy and reliable production. Capacities: max turning Ø 32 mm, max turning length 300 mm, max threading Ø 12 M, max tapping length 150 mm, collet taper F37. Main specs: spindle 5.5/7.5 kW, speeds 280–7000 t/min (stepless), back spindle 2.2/3.7 kW 280–7000 t/min, rapid traverse X/Y 15 m/min, Z 18 m/min, supply 3x 380 V 50 Hz, air 5 bar; weight ~3800 kg; dimensions 2645×1405×1680 mm. Accessories: bar feeder IEMCA BOSS 338/32, 180 l coolant, set of collets, toolholder set, parts catcher, conveyor belt, tool cabinet, central lubrication, fire extinguishing system, status light, spindle blow-out (backspindle). Achieves tight tolerances; typical for automotive, watchmaking, machine tools, aerospace and medical. Hsdpfxoxx U Sce Agwopa

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE Hpjdpfx Agoxlunkewea - Max. bar diameter : 20 [mm] - Max. machining length : 205 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 1 [°] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 10 - Number of motorized positions : 4 END ATTACHMENT - Number of positions : 7 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 7 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2200 x 1200 [mm] - Machine height : 1700 [mm] - Machine weight : 2200 [kg] MACHINE HOURS - Number of hours under power : 45903 [h] - Number of working hours : 37213 [h] - Number of spindle hours : 19893 [h] EQUIPMENT - CNC : Fanuc 300is-model A - HFT (High Frequency Turning) - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Coolant tank - Bar loader : FMB turbo 3-26 / 3200 A