Fans Unknown 2004

Unknown

Condition: used, gebraucht WA0145 840 € 1 3100 mm 40 mm 115 mm slightly cranked Giedpoyukcqsfx Adbop

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Gsdpfxovvkd Te Adbjip

Condition: used, gebraucht WA0147 Gsdpoyukcksfx Adboip 890 € 1 3050 mm 105 mm 85 mm (screwed 5x from above)

Condition: used, WA0136 3150 € 1 8 mm Gsdoyukbtjpfx Adbeip 3 x 1.000 & 1 x 1.050 mm complete 30°

Condition: excellent (used), Year of construction: 2010, Single-sided edge banding machine for processing straight workpiece edges as well as applying and post-processing various edge materials in both longitudinal and transverse feed directions. OVERVIEW OF THE EQUIPMENT CONFIGURATION: - POWER CONTROL PC 20+ electronic control - PU upper pressure rollers instead of rubber rollers - Workpiece gap optimization - Infeed fence extension by 300 mm with additional device for laminate overhang - JOINTING MILLING UNIT 2 x 2.2 kW 200 Hz - GLUING UNIT A12 with automatic edge feeding – Quickmelt application unit – Standard application unit interchangeable for PU glue - Pressure zone with motorized adjustment - END TRIMMING UNIT BEVEL/STRAIGHT 2 x 0.35 kW - PNEUMATIC ADJUSTMENT END TRIMMING BEVEL/STRAIGHT - PNEUMATIC 2-POINT ADJUSTMENT END TRIMMING - PRE-MILLING UNIT 2 x 0.55 kW counter-rotating – with PNEUMATIC 2-POINT ADJUSTMENT (flush and radius/chamfer milling) – Program control for side tracing rollers stepless and edge thickness – Multi-roller tracing - MULTIFUNCTION PROFILE MILLING UNIT 2 x 0.4 kW with exchange system and quick-change heads Gisdpfx Adex S I Iyobjp - PROFILE SCRAPER WITH QUICK-CHANGE HEADS - Special tracing for profile scraper - PNEUMATIC ADJUSTMENT SCRAPER - GLUE JOINT SCRAPER - POLISHING UNIT - RELEASE AGENT SPRAY UNIT WORKPIECE - CLEANING AGENT SPRAY UNIT WORKPIECE

Condition: used, gebraucht WA0127 Giodsyukbaspfx Adbsp 1230 € 1 2500 mm 70 mm 70 mm 8/11/12/16/24/36 mm

Condition: used, gebraucht WA0143 Gsdpfx Adsyuka Nobjip 690 € 1 3100 mm 90 mm 25 mm mint condition

Condition: used, Year of construction: 2012, Control POWER CONTROL PC 20+ Panel height (mm) 60 PVC-ABS edge thickness (mm) 3 Solid edge thickness (mm) 12 Feed speed mt/min 20 Upper motorized rubberized belt Manual infeed guide Anti-adhesive group Rightening group Gluing with EVA glue Edge holder plate End trimming group with automatic inclination adjustment Staggered trimming and cornering group with two motors Linear 2-motor rounding group Edge scraper group Glue scraper group Brush group Gedpfowwk Duex Adbjip

Condition: used, gebraucht Gisdpfx Adoyukavsbjp WA0181 prompt, Zwischenverkauf v 1800 € 1 3100 mm 160 mm 45 mm mint condition 86° Slightly cranked, planed

Condition: used, gebraucht WA0180 prompt, Zwischenverkauf v 1800 € 1 3100 mm 80 mm 80 mm 86° 10/15/20/30/40/50mm mm mint condition Gedpfx Adoyukapsbeip

Condition: used, Year of construction: 2018, functionality: fully functional, Biesse Akron 1400 Edgebander. Genuine UK Machine available for demonstration: £10,000 + VAT This machine is suited for flush or bevel trimming of edgebanding materials upto 8mm thick (Max 3mm on the coil). Currently the machine is fitted with Straight cutters, but combination cutters can be fitted for radius trimming. This machine DOES NOT do corner rounding. But does have the following units: - Pre-Milling. Gijdpfxsxrwm No Adbop EVA Hot Melt Gluing System. End Snipping Saws (Straight or Chamfer cut). Rough Trim (Top & Bottom). Fine Trim (Top & Bottom). Glue line scraping (Top & Bottom).

Condition: used, gebraucht WA0168 prompt, Zwischenverkauf v 2800 € 1 190 mm mint condition 3 divided, 1x3500 1x2000 1x1000 mm Godpfx Aeyukaijdbjip slightly cranked

Condition: used, gebraucht 070165C prompt, Zwischenverkauf v Deutschland 480 € Gijdpfx Aeyui Urodbsp 1 1.5 mm 100 mm 200 mm 3 - 6 bar 560 mm 200 mm 200 mm 11 kg

Condition: used, Year of construction: 2015, functionality: fully functional, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banding machines for gluing and processing straight edges with roll material (melamine, PVC, ABS, veneer) and strip material (solid wood, laminate, sliced veneer, etc.) • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness 10-60 mm Workpiece thickness with MFU aggregate (depending on profile) 10-35/60 mm Edge height 14-64 mm Edge thickness – roll material 0.4-3 mm Edge thickness – strip material (*) 0.4-10 (12) mm Workpiece overhang 25 mm Minimum panel length 140 mm Minimum width (at 140 mm length) 85 mm Minimum width (at 250 mm length) 50 mm Feed speed 12 m/min Dust extraction* 8x connection Ø100 mm Gijdpfx Aexzb Iiodbep Compressed air connection 7 bar Glue pot capacity 2 (approx.) kg * Depending on selected aggregates. - GLUING UNIT VC-511 Applies the hot-melt adhesive to the workpiece, feeds the edge to the workpiece, automatically cuts it from the roll, and presses it onto the workpiece, guaranteeing perfect positioning. - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs with 0° to 15° angle. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made of synthetic material up to a thickness of max. 3 mm. JOINTING CUTTER UNIT RT02 Joins the workpiece before glue application. Equipped with two 1.8 kW high-frequency motors at 12,000 rpm. SCRAPER UNIT RB02 For post-processing thick PVC/ABS edges. FLAT SCRAPER RC02 Aggregate for removing excess glue in the edge-to-panel area. Equipped with tracing rollers and a flat knife with engagement control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edge using fabric polishing discs. The unit automatically adapts to the workpiece thickness. ANTI-ADHESIVE SPRAY UNIT ADZ02 Precision application of anti-adhesive using injectors activated by numerical control. KIT PRO-GLUE The PRO-GLUE kit includes the following components: • TEKNO-GLUE system for optimal gluing through: - controlled pressure of the glue roller - automatic disengagement in case of feed stop - automatic ON/OFF of the glue unit • REVERSE system to switch the glue roller for co- or counter-rotation Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue with machines equipped for EVA gluing. NC Axis for Fine Trimming Unit Kit for the automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system. Pair of multiprofile cutters for the fine trimming unit: 25-degree bevel, radius 2 mm + radius 1 mm plus straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of the tracer to match the edge thickness. Adjustment takes place via the control system. Function for processing only on the corners. NC Axis for Scraper Unit Kit for automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system.

Condition: used, gebraucht WA0137 1960 € 1 Gisdsyui Tuepfx Adbep 3000 mm 190 mm slightly cranked