High performance L+Z lathe

VDF Heidenreich + Harbeck M 530

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning diameter over slide rest: 280 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm Ijdpfxjxz Edno Adisa adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray several tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: excellent (used), Offer consisting of: Polar 115E guillotine (1995), RA-4 jogging table (2004), unloader/. POLAR guillotine 115 E serial no. 6531415, year of manufacture 1995 – display, cutting table with air nozzles, 1 knife. Jogging table RA-4 serial no. 7482431, year of manufacture 2004 – KNORR stacker ABS-145-3-L /GL serial no. 6960012, year of manufacture 1999. Iodpfxjxax D Se Adiea

Condition: used, Year of construction: 1971, height of centers: 265 mm Iodpfsurirdox Adioa center distance: 1500 mm max. circulation-Ø over bed: über Bett 540 mm spindle boring: 65 mm spindle retainer: Gr. 8 retainer taper tailstock: 5 MK spindle speed: 9 - 1800 rpm forwarding feed: längs/plan 0,063-2,24/0,032-1,12 mm/U thread pitch: 0,35 - 560 mm electrical connection: 380 V, 11 kW space needed: 4580 x 1250 x 1330 mm weight: 3200 kg

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 500 mm turning diameter over support: 260 mm turning length: 950 mm center height measured in bed: 220 mm centre distance: 1000 mm revolution per minute: 11,2 - 2240 / 24 step U/min spindle bore of work spindle: 62 mm tailstock quill adjustment:: 210 mm longitudinal feeds:: 0,045 - 1,6 mm/U - 32 step cross feed: 0,02 - 0,71 mm/U - 32 step total power requirement: 11 kW weight of the machine ca.: k.A. t dimension machine xH: 3,3 x 1,2 x 1,6 m The machine is in a very good condition (very quiet spindle run) in Leipzig. Top slide rotatable 360° 3-jaw lathe chuck Ø 315mm with jaws (inside/outside) for speed 2000 rpm. Thread cutting: metric, modular thread, inch Chip protection wall Chuck protection (mechanical) Ijdpfxsv A Sqho Adiea MULTIFIX steel holder with Ø 40mm drill steel holder Chip collection tray Coolant supply with pump Protective device for lead screw Machine base UVV is pre-equipped ( UVV=Accident Prevention Regulations) *

Year of construction: 1989, condition: excellent (used), Coming up for sale: 1 used clamping / boring mill table Manufacturer: Skoda Type: E20OB22875 year: 1989 dimensions 2.000 x 2.000 mm part weight: up to 25t electr. adjustable Iodpeg Sbbmsfx Adioa mass: 10t

Condition: used, Tool holder shaft type:HSK-A 100 Tool holder shaft type:Wohlhaupter Tool holder shaft type:Feindrehwerkzeuge Ausdrehkopf / Precision Turning Big selection of Wohlhaupter HSK-A 100 Tool holders / precision turning tools / adapters /extenders etc. for sale Iedpfxeg Nqlie Adioa Sales list with prices upon request.

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 58 mm, turning diameter over bed slide: 430 mm, center height: 215 mm, turning length: 760 mm, quill stroke: 127 mm, quill diameter: 58 mm, total length: 1,885 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,680 kg, quill mount: MK 4, Tip height: 215 mm Center width: 760 mm Spindle bore: 58 mm Iodpfx Ascir Anodija Spindle nose according to DIN 55029 Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 mm Weight approx. 1680 kg Equipment including Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: used, Year of construction: 1979, x-travel 800 mm y-travel 300 mm z-travel 400 mm turning speed range 25 - 2.000 U/min power capacity 4 kW feed 5 - 500 m/min rapid traverse 1,5 m/min work table: 1.000 x 700 tool taper SK40 Iodpfxswwwqho Adija weight 1,8 t dimensions of the machine ca. 2,50 x 2,40 x 2,00 m The machine is in good condition. The digital display is defective (the scales are ok) Extra interchangeable milling head. No accessories.

Condition: good (used), Tovaglieri parallel lathe Used, from school provenance. Very good condition. Height of centers : mm 180. Distance between centers : mm 700. Ijdpfekt U E Iex Adisa Bar passage : mm 45 Supplied accessories No. 4 available except sold

Condition: used, turning diameter 3.200 mm turning diameter modified: 2.400 mm turning diameter over slide 3.000 mm turning length max. 15.000 mm control Sinumerik 840 D Siemens workpiece weight max. 80.000 kg work accuracy (up to) 0,01 mm turning speed range - main spindle max. 50 min/-1 weight of the machine ca. 154,4 t dimensions of the machine ca. 20,7 x 6,0 m Heavy Duty Lathe ZERBST - DXP 5 / W15x15000 - measurement precision: < 0,01 mm Retrofit 2009 / 2012: Isdpfswtrz Hsx Adisa - 2009: Control system upgrade to Sinumerik 840D - 2012: - New main gearbox, incl. main spindle drive - Installation of holding brake, incl. electrical integration - Modification and optimization of cylindrical roller bearings/bearings - Modernization: Control and safety technology