Lathe Victor Ø400 x 1500mm

Victor Taichung 400x1500

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Available with distance between centers also 2000 and 3000 mm. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Technical data: Center height 280 mm Max. diameter over bed 560 mm Max. diameter over carriage 360 mm Ncodpfx Asvbquiebvep Max. diameter over pocket 770 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50/60 Hz 7.5 kW Coolant pump 400V 50/60 Hz 90 W Dimensions 2500 x 1400 x 1500 mm Net weight 2920 Kg Gross weight 3555.00 kg Accessories included: Self-centering chuck with 3 reversible jaws Ø 320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: used, centre height 102 mm Nodswbi Hpopfx Abvocp centre distance 450 mm spindle bore 25 mm spindle speed: 220 - 2600 Accessories were not checked for completeness Cabinets are not included in the scope of delivery

Condition: used, Swing Diameter Over Bed: 400 mm Swing Diameter Over Longitudinal Slide: 350 mm Distance Between Centers: 610 mm Travel Limit: 240 mm Suggested Workpiece Diameter: 200 mm Max Longitudinal Travel: 560 mm Machining Length: 550 mm Njdexg Nd Aspfx Abvocp Max Cross Travel: 40 mm + 120 mm Height of Spindle Axis from Floor: 1135 mm Programmable Spindle Speed Range: 40 to 4000 rpm Spindle Bore Diameter: 52 mm Spindle Interior Cone: MK 6 Slide/Bed Slope: 45/45° Turret Positions: 12 Tools Main Motor: 15 kW Control: Fanuc 6T Equipped with: See photos

Condition: used, Lathe M. DE VALLIERE H140 Ncjdpfxexbt Als Abvop

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 430 mm, spindle bore: 103 mm, turning diameter: 630 mm, center height: 315 mm, turning length: 2,000 mm, spindle speed (max.): 1,250 rpm, spindle speed (min.): 11 rpm, overall weight: 3,300 kg, Parallel Lathe ZMM-SIBIMEX CU 630/2000 Year of manufacture: 2007 CE certification Ncedjytpqqopfx Abvop Excellent overall condition Centre height: 315 mm Max turning length: 2000 mm Swing over bed: 630 mm Swing over cross slide: 430 mm Swing in gap: 830 mm Spindle bore: 103 mm Bed width: 400 mm Motor power: 11 kW Weight approx.: 3300 kg Number of speeds: 11 Spindle speed: 11.5 - 1250 rpm Machine complete with steadies Self-centering chuck Live tailstock Elbo axis readout Rapid feeds Machine complies with safety regulations

Condition: used, Year of manufacture: 1980s/90s Technical data: Centre height: 185 mm Centre distance: 750 mm Turning diameter over bed: 370 mm Spindle bore: 36 mm Bed width: 250 mm Nsdpfx Ajydk Hhsbvocp Speed range: 38 - 1600 rpm Tailstock taper: MT 3 Quill stroke: 110 mm Dimensions (W x D x H), approx.: 1950 x 900 x 1200 mm Weight, approx.: 800 kg Equipment: - 3-jaw chuck, make: Röhm, ø 200 mm - Quick-change tool post with 4 holders - Bed stop - Chip tray

Condition: good (used), Year of construction: 1973, functionality: fully functional, 1 x L + Z lathe Dormac Doria 230 L 8 T, year of manufacture: 1973, in good condition. Technical data: Centre height: 230 mm (350 mm without gap bridge) Centre distance: 1,600 mm Spindle speeds: 16 – 1,500 rpm (in 12 steps) Spindle bore: 120 mm Tailstock taper: MK 5 Quill travel: 240 mm Njdpeyvfwlofx Abvjcp Accessories: 3-jaw Röhm chuck 320 mm with 2 sets of jaws 1 x 4-way quick-change tool post Parat with 5 tool holders 1 x drill chuck in tailstock 2 x fixed centre points in tailstock Various turning tools/boring bar holders The machine can be inspected under power.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Further information will follow. Nedjyrg Iwjpfx Abvocp

Condition: excellent (used), Year of construction: 2001, Workbench parallel Lathe WABECO 10200 Between points: 500 mm Maxi Ø on bench: Ø 200 mm Maxi Ø over saddle: Ø 120 mm Spindle diameter: Ø 26 mm Spindle speed: from 10 to 1000 RPM (on electronic dimmer) Square/ tilting turret 3-jaws chuck Ø 100 mm Year of construction: 2001 Tailstock CM2 Longitudinal auto feeds Supplied with the gears (see photo) Supplied without the table Voltage: 220 V mono Dimensions (L x W x H): 1200 x 300 x 450 mm Ncodpfxexpuh Eo Abvop Weight: approx 100 kg

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 38 mm, turning diameter over bed slide: 320 mm, turning length: 910 mm, total length: 700 mm, total width: 1,610 mm, total height: 1,350 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 65 rpm, metric thread diameter (max.): 6 mm, metric thread steps: 23, overall weight: 272 kg, three-jaw chuck diameter: 160 mm, The HOBBY 910 G lathe in its standard configuration comes equipped with a leadscrew and feed shaft for threading, as well as for automatic longitudinal and cross feeds. The 12-speed gearbox allows for quick speed adjustment without the need to change the V-belt. Thanks to its compact design and high weight, the machine ensures quiet and highly precise operation. - Easy and quick spindle speed changes via the gearbox - High concentricity due to precision ball bearings - High-power drive motor with high torque, spindle speed range 65 - 1650 rpm - Wide scope of use: precision engineering, vocational training centers, educational institutions, etc. - Simple feed adjustment mechanism, smooth and precise switching - Rigid machine bed with induction-hardened and ground guideways - Optimally suited for machining steel, non-ferrous metals, and plastics - Standard equipment includes a leadscrew for automatic longitudinal and cross feed - Saddle with handwheels with precision dials Centre distance: 910 mm Centre height: 160 mm Swing over bed: 320 mm Bed width: 160 mm Spindle bore: 38 mm Spindle taper: MT 5 Spindle speed min.: 65 rpm Spindle speed max.: 1650 rpm Speed change - number of steps / stepless: 12 Longitudinal feed range: 0.087 – 2.049 mm/rev Cross feed range: 0.019 – 0.444 mm/rev Metric thread: (23) 0.25 – 6 mm Imperial thread: 4 – 120 TPI Tailstock quill travel: 75 mm Tailstock taper: MT 3 Motor power: 1.5 kW Continuous motor power S1 100%: 1.1 kW Voltage: 230 V Dimensions (W): 1610 mm Dimensions (D): 700 mm Dimensions (H): 1350 mm Weight approx.: 272 kg Ncjdpfx Aeyn Amnjbvep Scope of supply: - 160 mm 3-jaw chuck - Cross slide - Fixed centres - Change gears - 4-way tool post - LED work lamp - Chuck guard - Chip tray - Leadscrew cover - Service tools - Stand