Vertical lathe

Webster & Bennett

Condition: good (used), Year of construction: 1987, operating hours: 2,685 h, functionality: fully functional, feed length X-axis: 240 mm, feed length Y-axis: 200 mm, feed length Z-axis: 400 mm, total length: 5,235 mm, total height: 3,045 mm, total width: 3,990 mm, spindle speed (max.): 640 rpm, spindle speed (min.): 55 rpm, overall weight: 11,000 kg, Equipment: documentation/manual, Gear cutting machine Pfauter PE 300 Model: SK07E 20100 Njdjw Dcx Ropfx Ah Usdf Control: Sinumerik System 3 Fully functional machine, which was completely overhauled just a few years ago. Investments made: - Overhaul including milling head (2021) approx. €70,000 - All hydraulic hoses renewed (2021) approx. €3,500 - New oil mist separator (2021) approx. €5,000 Numerous tools and clamping devices available, see pictures and attachment.

Condition: good (used), Year of construction: 2006, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, table width: 1,000 mm, table length: 600 mm, table load: 500 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, Equipment: chip conveyor, Accessories: Approx. 40x SK-40 tool holders (without cutting tools) Operating hours: 32,379 h (as of July 9, 2024) Ndedpfx Aexcpkzjh Usf Spindle running time: 15,674 h (as of July 9, 2024) Clamps on table are not included! Machine available from: Imediately

Condition: used, Year of construction: 2001, Control SIEMENS Nodpfx Aeudc S Toh Uodf table surface area 160 mm weight of the machine ca. 10 t

Condition: used, Year of construction: 1997, bore capacity in steel (diameter) 40 mm arm length 1.000 mm workpiece height max. 1.250 mm table-size 1.150 x 690 mm spindle taper MT 4 spindle turning speed range 40 - 1.400 U/min feed range 0,08 - 0,40 mm/min crossrail adjustment horizontal 800 mm crossrail adjustment vertical 700 mm spindle stroke 220 mm power requirement 3,5 kW voltage 380 V total power requirement 4,0 kW Nedpfxjl Ha Two Ah Uodf weight of the machine ca. 1,6 t - Serial-No.: A01/446/97 - adjustable cube table 600 x 500 x 500 mm - coolant device - machine light

Condition: good (used), Reversible clamp, 4th axis, rotary table, rotary dividing table, controlled rotary table, dividing attachment, dividing head, rotary indexing table rotary coupling Njdpfxjhvtcbj Ah Uedf -Manufacturer: Fibro, Fibroplan rotary table with drive -Type: NC1.03.0340.1.1.04.04 -Table diameter: 340 m -Clamping: hydraulic -Drive: Indramat servo motor type 112B-0-LD-4-C/180-A-0/Wi533LX/S011 -Number: 2x round table available (1 x with base plate) -Price per piece -Dimensions: 660/640/H550 mm (with base) -Weight: 420 kg (with base plate) /pc.

Condition: ready for operation (used), Year of construction: 1996, 630T press retrofitted in 2010 by the company LITOSTROJ RAVNE Capacity: 630 tons Total power: 15 - 630 tons Ring power: 10 - 230 tons Lifting power: 50 tons max Back pressure power: 5 - 120 tons Ejection power: 22 tons max Max slide stroke: 180 mm Ring race: 30 mm Back pressure stroke: 30 mm Slide surface: 900 x 900 mm Table surface: 900 x 900 mm Number of strokes: 28 - 72 s.p.m. Power requirement: 80 kW Default configuration Nsdpfshh Hwlox Ah Ujdf

Condition: ready for operation (used), chuck outer diameter: 6,000 mm, controller model: Siemens/Heidenhain, empty load weight: 220,000 kg, Type: SD 600/6500 4 assen gerichte, kogelomloopspindels tussen kolommen: 6500 mm maximaal hoogte onder dwarsbalk: 4270 mm verticale beweging van de dwarsbalk: 2500 mm maximaal gewicht op tafel: 160 ton koppel van de tafel: 30.000 MKP, 200 PK Verticale beweging van Z1 Z2: 1750 mm Twee onafhankelijke schaarliften aan elke kant van de draaibank, met bedieningseenheid Njdpowaiuqjfx Ah Ujdf Max turningdia -- passage: 6500 mm Power on the spindle: 200 HP Max hight of workpiece Z-axis: 4270 mm Number of speeds: 1 > 40 rev/min Long: 20 500 mm Wide: 8500 mm Height: 6290 mm (above ground-level)

Condition: excellent (used), Year of construction: 2002, quill stroke: 35 mm, grinding spindle speed: 1,670 rpm, overall weight: 4,000 kg, Used cylindrical grinding machine STUDER S40 : Ndsdpfomuz Sqsx Ah Uef - 350 mm permissible diameter - Distance between centers 1000mm - Table travel 1050mm - Standard grinding wheel dimensions: 400x40x12mm Technical specifications : - Distance between points: 1000mm - Tip height: 175mm - Strokes: 1050 x 275mm - External grinding wheel dimensions: 400 x 40 x 127mm - Grinding head power: 7.5kW - Speed: 1,670 to 2,110 rpm - Workpiece-holder headstock taper: ISO 50 - Headstock power: 0.785kW - Max. workpiece weight between centers: 130Kg - Tailstock: Morse 3 type - Quill travel: 35mm - Weight: 4000Kg

Condition: good (used), Year of construction: 1994, CNC Spiral bending machine, capacity 50cm3, min-max diam of coil 500-3.500mm. Ndodpfxsiu Acpe Ah Uef

Year of construction: 1984, condition: ready for operation (used), Rafamet UBB 112/2 Wheel Tread Diameter Minimum 700 mm Wheel Tread Diameter Maximum 1120 mm Clamping length 540 - 1050 mm Wheelset Axle Length Minimum 1640 mm Wheelset Axle Length Maximum 2800 mm Maximum Tire Width 150 mm Maximum Wheelset Weight 4000 kg Saddle Set Up Motion Speed 2000 mm/min Saddle Feed Maximum 2000 mm/min Main Drive Motor Power 80 kW Ndodpfx Ashvml Ieh Ujf Weight aprox 40000 kg