Cycle controlled lathe

Weiler E 120 x 3.000

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Nodst N Antspfx Ah Ssdc Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025.

Condition: good (used), spindle bore: 260 mm, spindle speed (max.): 900 rpm, travel distance X-axis: 3,200 mm, total height: 3,409 mm, total length: 9,800 mm, total width: 3,609 mm, feed length Z-axis: 530 mm, overall weight: 34,000 kg, CNC Lathe with c-axis Okuma - LU-45M SuperBigBore MACH-ID 9778 Make: Okuma Type: LU-45M SuperBigBore Ndjdpfx Aoztctqoh Sec Control: OSP-P200L X-Axis: 3200mm Z-Axis: 530mm Spindle bore:260mm Speedrange: 900Rpm Length: 9800mm Width: 3609mm Height: 3409mm Weight: 34000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Saw BEHRINGER HBE 321 A Dynamic Njdpfox Tvkxjx Ah Sjdc

Condition: ready for operation (used), Cooler Guntner Type: S-GGN 066C/27 Cooling capacity: 40 kW at DT8 Fin spinning: 7 mm Place for electric heaters Fans: 2 x 660 mm Rpm: 870/650 Dimensions: 3050 x 700 x 1100 mm Refrigerant: Glycol Volume: 54.8 L Ndedpfx Aehz T Igjh Ssc Weight: 275 kg Pieces in stock: 4 Reference number: CH259 Condition: Used We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Very well-maintained lathe with powered tools and a sub-spindle. Year of manufacture: 2004 Mazatrol 640T NEXUS control 500 mm between centers Max. turning diameter: 380 mm 2x hydraulic Kitagawa chucks Measuring arm Powered tools with VDI40 adapter (VDI tools are available at an additional cost) C-axis Sub-spindle Everything has been cleaned and is ready for use! Machine weight: approximately 5 tons Forklift available for loading the machine! Machine price: €29,950 excluding VAT (no tooling included) Machine + VDI40 toolholders (13 driven + 17 fixed): €36,500 excluding VAT Ndodsyx U Itopfx Ah Sjc This machine is available for inspection in Genk and can be powered on for demonstration!

Condition: good (used), Year of construction: 2003, All parts shown by hand not come. Njdpfx Ajyyniajh Sodc Technical details are shown on picture.

Condition: used, Year of construction: 2000, centre height 400 mm centre distance 3.000 mm max. swing over bed 810 mm max. swing over facing slide 510 mm max. swing-dia. in gap 850 mm control WEILER max. workpiece weight 3.800 kg spindle diameter in front bearing 150 mm spindle bore 106 mm faceplate diameter 630 mm worktool system Parat Nsdpfx Aoy Ty Iheh Sedc tailstock quill taper MT 6 dia. of quill 115 mm spindle turning speed range 1 - 1.800 U/min Lathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor. A comprehensive tool package is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: E-80 | E 80 | E80 x 3000 | E80x3000 | E 80 x 3000

Condition: new, functionality: fully functional, load capacity: 300 kg, Equipment: foot remote control, Welding positioner Protec KT 300 H, 170/400 special version with hydraulic height adjustment and safety lock against lowering. Hydraulic platform load capacity 500 kg. Horizontal load 300 kg, tilted load 150 kg. Power supply 220 V, 50 Hz. Table diameter 450 mm, hollow shaft diameter 170 mm, table height 500 mm. Welding current transmission 400 A. Quick-acting chuck diameter 300 mm, surcharge €550. Quick-acting chuck diameter 400 mm, surcharge €750. Mobile hydraulic height adjustment, surcharge €650 (with lockable castors). Counter-support yellow, stepless height adjustment €250. Crank drive motor, 0-90° stepless adjustment. Speed stepless from 0.01 up to approx. 5 rpm. Incl. foot remote control. Digital display with welding time limitation available on request. Ndodpewz Rfgefx Ah Ssc

Condition: good (used), Year of construction: 2009, Parts shown by hand not come. Technical data shown on pictures. Ndjdpfx Ahezk I R Ae Soc

Condition: used, Year of construction: 2013, Brand : GEMINIS Model : GT5 G2 1200x1000 Manufacture year : 2013 Cnc : SIEMENS 840D-SL Center height: 615 mm Swing over cross slide: 850 mm Swing over bed : 1200 mm Main spindle bore diameter: 104 mm Main spindle nose: DIN 55026-11 mm Spindle diameter on front bearing:150 mm Turning Speeds : 0-1400 rpm Nodszn Axispfx Ah Sedc Spindle Ranges: 4 Headstock power: (S1/S6-60%) 30/37kw – (37/46kw Optional) Headstock torque: (S1/S6-60%) 4000/4850 Nm (4800/5950Nm) Guide width: 655 mm Height up to the plane guide: 800 mm