Lead/traction spindle lathe

Weiler Praktikant 140

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler Praktikant 140 B Lead and Feed Screw Lathe – Toolmaker Precision with 3-Axis Digital Readout from K&C, NEW! Technical Data: - Year of manufacture: 1988, Machine No. 89-160-1292 - Centre height: 140 mm - Centre distance: 650 mm - Spindle speeds: from 24 to 2,500 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock: Morse taper 3 - Feeds: from 0.02 to 0.63 mm/rev - Thread cutting capability: Metric, Imperial, Module, and Diametral Pitch - Metric thread pitches: from 0.25 to 8 mm - Weight: approx. 680 kg - Engagable spindle brake - Dimensions (LxHxD): 1.6 m x 1.25 m x 0.7 m Nwedpsymdy Tofx Aacsc Included Equipment and Features: - NEW K&C 3-axis digital readout, 12-month manufacturer's warranty, including operating manual Features: Switching between mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick reset to zero, change of counting direction - Collet chucking device with collets from 1 to 29 mm, in 0.5 mm increments - 160 mm three-jaw chuck with 1 set of jaws - Multifix quick-change tool post size A with 2 tool holders - Bed stop - Rear panel - Machine feet - Electronic spindle safety guard - Operating manual Safety Equipment: Electronic spindle guard, covered lead and feedscrew, 2 emergency stop buttons, spindle brake, electronic change gear door safety switch About the Machine: For sale is a Weiler Praktikant 140 B lead and feed screw lathe in very good condition. This excellent lathe comes from a training workshop. All of the slides move smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and enables surface finishes comparable to grinding. Take advantage of the opportunity to see and test the machine under power on site, and convince yourself of its condition.

Condition: used, Year of construction: 2003, machine/vehicle number: 1527, Used lead and feed screw lathe COLCHESTER Triumph VS 2500 Centre height: 195mm Distance between centers: 650mm Spindle bore: 54mm Infinitely variable speed: 14–2500 rpm Tailstock quill: MT5, coolant system, quick thread cutting device Digital readout: FAGOR NUP 300 TS-RS 1 x RÖHM 3-jaw chuck, 5-position stop drum, spindle stop, Nwsdpfx Aaox Hrumecsc machine lamp, 1 x PARAT 4-way turret, 4 x PARAT tool holders, live centre and quick-action drill chuck. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Inspection of the machine is possible by appointment.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Weiler Praktikant 140 B Lead and Feed Screw Lathe with Toolroom Accuracy featuring NEW K&C 3-Axis Digital Readout! Technical Data: - Year of construction: 1989 Machine No.: 89-140-1471 - Centre height: 140 mm - Centre distance: 650 mm - Spindle speeds: from 24 to 2500 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock MK 3 - Feeds: from 0.02 to 0.63 mm/rev - Thread cutting: Metric, Imperial (inch), Module and Diametral Pitch threads possible - Metric thread pitches: from 0.25 to 8 mm - Weight: approx. 680 kg - Spindle brake, selectable - Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Nedpfx Aaoymdymocjwc Accessories and Equipment: - NEW K&C 3-axis digital readout, 12 months manufacturer warranty and operating manual Functions: switch mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool library for 200 tools, taper calculation, radius/diameter indication, quick zeroing, count direction switching - NEW collet system with collets from 3 to 25 mm, 1 mm increments - Three-jaw chuck, 160 mm, with 1 set of jaws - Multifix size A with 2 tool holders - Face plate - Bed stop - Rear cover - Machine feet - Electronic spindle guard - Operating manual Safety features: Electronic spindle protection, lead and feed screw cover, 2 emergency stops, spindle brake, electronic change gear guard About the machine: For sale is a Weiler Praktikant 140 B lead and feed screw lathe in very good condition. This well-maintained lathe comes from a training workshop. All slides operate smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-like surface finishes. Take the opportunity to view and test this machine under power on site to verify its condition for yourself.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler Praktikant 140 B Lead and Feed Screw Lathe with Toolmaker Precision and New 3-Axis Digital Readout from K&C!!! Technical Data: >> Year of manufacture: 1988, Machine No. 88-140-1386 >> Center height: 140 mm >> Distance between centers: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds from 0.02 to 0.63 mm/rev >> Thread cutting possible: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake engageable >> Length 1.6 m, height 1.25 m, depth 0.7 m Equipment and Accessories: >> New 3-axis digital readout from K&C, 12-month manufacturer warranty with operating manual Functions: mm/inch conversion, coordinate selection ABS/INC, value halving, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switch >> NEW collet chuck, collets from 3 to 25 mm in 1 mm increments (NEW) >> 160 mm 3-jaw chuck with 1 set of jaws >> Multifix size A with 2 tool holders Nodpfx Asymdu Doacjwc >> Bed stop >> Rear guard >> Machine feet >> Electronic spindle protection >> Operating manual Safety features: Electronic spindle protection, lead and feed screw guard, 2 emergency stops, spindle brake, electronic interlock for gear change cover About the Machine: For sale is a Weiler Praktikant 140 B lead and feed screw lathe in very good condition. This lathe comes from a training workshop and is in excellent shape. The slides run smoothly and evenly. The machine runs quietly even at high spindle speeds. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take this opportunity to view the machine under power on site and see the condition for yourself.

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 91-160-2498, Used WEILER PRAKTIKANT 160 lead and feed screw lathe Centre height: 160 mm Centre distance: 650 mm Nwodsyciw Aepfx Aacsc Spindle speeds approx. 48–2,500 rpm Spindle bore: 40.5 mm Leadscrew and feed shaft are covered. Scope of delivery: Including 3-axis digital readout from Heidenhain, chip guard back wall, lever collet system (without collets), 1 x faceplate Ø 250 mm, electrically interlocked chuck guard, machine lamp, Multifix size A quick-change toolpost with 4 holders, bed stop, cooling unit, and fixed steady rest. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Condition: used, turning diameter over bed 280 mm turning diameter over slide rest 160 mm turning length 500 mm centre height 140 mm centre distance 500 mm spindle bore 36 mm spindle turning speed range 15 - 3550 U/min spindle head DIN 55022 Gr. 5 feeds - longitudinal 0,008 - 0,560 mm/U feeds - cross 0,004 - 0,280 mm/U thread - mm pitch 0,2 - 12 mm dia. of leadscrew 24 mm lead of leadscrew 6 mm tailstock taper MT 3 tailstock quill stroke 90 mm Nodpfjx Ni Dkex Aacewc tailstock adjustment out of the central pos. 15 mm total power requirement 2,2 kW weight of the machine ca. 0,6 t - machine out of teaching shop - Accessories: DRO on 3 axis, 3-jaw chuck RÖHM 160 mmø, MULTIFIX-head A

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,000 h, spindle speed (max.): 2,500 rpm, overall weight: 1,800 kg, This Colchester Triumph VS 2500 was manufactured in 2015. It features a conventional pull and lead screw, infinitely variable speed adjustment, and a digital display. Key specifications include a turning diameter of 400mm, center height of 195mm, and a bed width of 1270mm. It also comes equipped with a MultiFix quick-change tool holder, maximum spindle speed of 2500rpm, and a motor power of 7.5kW. Weight is 1,800kg. Contact us for more information about this machine. • Control: Conventional with lead screw and infinitely variable speed adjustment • Readouts: Digital display for axes and digital spindle speed display • Operating hours: No counter; estimated 5,000–7,000 h • Turning diameter: 400 mm Nwjdex D Nwdepfx Aacec • Center height: 195 mm • Bed width: 1270 mm • Toolpost: MultiFix quick-change tool holder Additional equipment • 3x three-jaw chucks • 3 sets of claw jaws • Chuck wrench • Manual/operating instructions • Work area lamp • Digital dial indicator • 4 MultiFix tool holders • Various turning tools • Drill chuck (keyless) for tailstock • Coolant pump

Condition: reconditioned (used), Universal Tool Milling Machine Brand: harich (DECKEL) Model: B (FP 2) stepless Refurbished with CE Geometric acceptance with inspection protocol Nwjdpfx Aasvfdatecoc With warranty Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Centralized lubrication, manually operated - Coolant system - Operating manual CE and Safety Equipment: - New machine electrics with control cabinet - Electronically monitored cover on vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, release, start, and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

Condition: used, Year of construction: 1970, Weiler lathe with tailstock Nwsdpfxohtnu Tj Aacjc

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 Nsdpfxoxnda Ue Aacewc quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions