HYDRAULIC PRESS

FISCHER

Condition: used, Year of construction: 2005, sheet width 3100 mm plate thickness 12 mm distance between columns 3260 mm back stop - adjustable 3 - 1250 mm Cgedpjzbc Acjfx An Nju power capacity 37 kW voltage 400 V weight of the machine ca. ca. 14 t dimensions of the machine ca. 4,00 x 4,00 x 2,20 m CNC-controlled plate shear

Condition: excellent (used), Year of construction: 1975, -KOM 1002-

 Offered here is a press of the company HYDRAP of the type HKPS8000. Technical data: Type: HKPS8000
 Year of manufacture: 1975
 effective stroke: 200mm throat: 250mm (at center) table size: 320x320mm Cgedpsg Ufvbsfx An Nsu Installation height: approx. 345mm Voltage: 380V 
Perm. load: 80000N
 Drive type: HYDR Drive power: 1,5kW Oil quantity: 60l Oil viscosity: 3°E

Year of construction: 2020, condition: used, FISCHER – Cantilever racking for installation in enclosed spaces. The racking must not be clad on-site without consulting FISCHER. Design according to the specifications. Racking No. 1 - single-sided (cantilever arms bolted on). Number of racks: The following information refers to 1 rack. 1 unit Number of uprights: 3 units Racking length (center-to-center distance): 2,500 mm Distance between uprights: 2 x 1,250 mm Upright height (hole pitch 100 mm): approx. 2,500 mm Top storage level: 2,200 mm Foot length: 1st side/2nd side 2,000 / 0 mm Cantilever arm lengths (total length incl. end stop): 2,000 mm Cantilever arms: 1st side/2nd side 4 / 0 units Cedpfezab Rcex An Nogu Desired load capacity per cantilever arm: 500 kg Load capacity per upright side (without considering the foot): 2,000 kg Max. floor pressure: 0.11 kN/cm2 Shipping weight per rack: 607 kg Color of uprights: fire red, similar to RAL 3000 Color of cantilever arms: fire red, similar to RAL 3000 1 spray can The profile thickness applies to 100% utilization of the rack load capacity. Seismic zone could not be determined. A verifiable or tested static analysis is available for an additional charge. Text for the static calculation: Important note regarding the static calculation of the storage system: The static calculations take into account the fundamentals according to Eurocode (DIN EN 1991-1-1, DIN EN 1991-3 and DIN EN 1991-1-4) and the framework conditions of the respective national annexes (NA) applicable in the countries where the system will be installed. Since storage systems are usually installed in urban or industrial areas, the requirements applicable to these areas (e.g., for Germany, ground category III and IV) are included in the calculation. Important note regarding building permits, please note: Storage systems may require a permit according to the respective state building code. In the event of an order placed with Fischer, the client undertakes to obtain the necessary public-law permits for the storage system. If the permit is not granted, or the granted permit is revoked or withdrawn, the contractor shall not be liable for this. In the event of installation by Fischer, we generally assume that a valid building permit is in place at the time of installation. Any necessary verifiable static calculations for the building application can be obtained for a fee; please contact us. Cantilever racking: 1 unit 1,500.00 Foot rounding as a safety element: 3 units 13.50 per foot and side Storage location: Customer

Condition: ready for operation (used), Year of construction: 2001, functionality: limited functionality, For sale is a Fischercope H100C XYp micro-/nano-hardness testing system by Helmut Fischer (year of manufacture: 2001). The device was last used in a laboratory, but is currently not fully functional and is therefore expressly sold as defective / for repair or as a source of spare parts. Known issues: - Table advance movement does not function correctly (the table is positioned under the measuring head, not under the microscope – precise measurement is currently not possible). Likely an electronic issue. Csdpfx Anoyu Nabs Nsgu - The measuring table moves independently to the left – possibly a joystick failure. - Indenter change does not work correctly (the probe does not move fully to the end stop). Therefore, the device is particularly suitable for: • Repair by individuals with electronics expertise • Sourcing of spare parts • Research / hobbyists The optical condition is good for its age.

Condition: excellent (used), 16 end mills with indexable inserts Make Walter Weight 9.5 kg Cgjdpjdx D Tvofx An Neu

Condition: good (used), Cleaning booth for component cleaning using a high-pressure cleaner. Previously used for cleaning components after 3D printing (e.g., for removing support material). Operation via foot switch. In good condition. Codpfxjza T Nkj An Nsgu

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 159879, 🔥 PREMIUM LISTING – FISCHER MFV-1224/50 HIGH-SPEED ELECTROSPINDLE 🔥 50,000 RPM | HSK-C32 | TOP CONDITION | READY FOR PRODUCTION High-end FISCHER MFV-1224 electrospindle available for sale – a premium solution for precision grinding and high-speed CNC machining. Ideal for demanding industrial environments where accuracy and reliability are critical. ⸻ ⚙️ Key Specifications • Model: FISCHER MFV-1224/50 • Maximum speed: 50,000 RPM • Tool interface: HSK-C32 (Automatic Tool Change) • Type: High-frequency electrospindle • Built for high precision & high-speed applications ⸻ ✅ Condition & Performance • Professionally tested and verified • Excellent running condition – smooth operation • No abnormal noise, no vibration • Spindle is ready for immediate installation • No crashes, no hidden defects ⸻ 🎯 Typical Applications • Internal & external grinding • High-speed milling • Precision machining (aerospace, molds, tooling) ⸻ 📦 What’s Included • Complete spindle unit (as shown) Cgodpfoy Hpbwex An Nsu • Carefully packed for safe transport ⸻ 💎 Why this spindle? • Premium Swiss/German engineering quality • High reliability at extreme speeds • Excellent value compared to new (save thousands €) ⸻ 💰 Price: [5000€ – negotiable] 📍 Location: Romania 🌍 Worldwide shipping available ⸻ 📹 Extra • Running video available on request • Additional photos & technical details available ⸻ 📩 Serious inquiries only. Ready to ship – fast deal preferred.

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm :5 :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm Cjdpfx Anscxxx Rs Nogu weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition

Condition: excellent (used), functionality: fully functional, three-jaw chuck diameter: 160 mm, Three-jaw chuck eccentric – clamping chuck 1 piece used, very well-maintained Horvath Fischer eccentric clamping chuck (three-jaw chuck) with a diameter of 160 mm, maximum adjustable eccentricity: 25 mm, chuck mounting cylindrical with a diameter of 150 mm, complete with chuck key and one set of hardened stepped jaws as well as the installation and operation manual for the Horvath eccentric chuck, all likely in the original wooden box (Hahn & Kolb). Year of manufacture unknown. From our own inventory. Eccentric lathe chuck for clamping workpieces on a lathe. Csdsg Umb Eopfx An Nogu Price €195 net ex stock, plus packaging costs. All technical data subject to errors and omissions. We sell exclusively to countries of the European Community.

Condition: excellent (used), Fischer FISCHERSCOPE X-RAY XDL 240 Professional X-ray fluorescence measuring device / XRF analysis system Manufacturer: Helmut Fischer GmbH Type: FISCHERSCOPE X-RAY XDL 240 For sale is a professional Fischer X-ray fluorescence measuring system for coating thickness measurement, material analysis, material testing, and quality control. The device comes from commercial use and is offered including PC system, monitor, software, documentation, calibration standards, accessories, and tools, as shown in the pictures. Manufacturer: Helmut Fischer GmbH Made in Germany Type: XDL 240 Serial number: SN150004753 Supply voltage: 115 V Frequency: 50 - 60 Hz Power consumption: 120 W Fully shielded device according to RöV §8 Annex 2 No. 3 Approval number: BfS 11/07 V RöV Fischer WinFTM software available Cgedjy Ulalspfx An Neu WinFTM XDL 240 Version 6.33 L-PDM PC system with HP computer, monitor, keyboard, and mouse. Original Fischer documentation, certificates, data storage media, USB dongle / license stick and other accessories available. EC Declaration of Conformity available. Certificate for the Full-Protection Instrument available. Calibration and reference standards and other measuring accessories as shown in the pictures are included. Suitable for coating thickness measurement, material analysis, quality control, laboratory applications, and industrial measurement technology. Used measuring system from industrial application. Optical condition, see pictures. The system starts up, software and user interface are visible. No further technical inspection or calibration has been carried out by us. Inspection and testing on site is possible and desired after prior arrangement. Important note: "The table shown in the photos is not part of the sale." Dimensions and weight: Dimensions: 57.0 x 76.0 x 65.0 cm Internal dimensions: 46.0 x 49.5 cm (maximum sample height depending on configuration) Power supply: Voltage: 100 - 240 V~ (AC) Frequency: 50 - 60 Hz Power consumption: 180 VA (Volt-Ampere) Weight: 120 kg Scope of delivery: FISCHERSCOPE X-RAY XDL 240 HP PC system Monitor Keyboard and mouse Software / data storage media USB dongle Calibration standards Tools Documentation and accessories as shown in the pictures Sale exclusively to commercial businesses. Sale is used, without guarantee, warranty, or return. All information provided to the best of our knowledge according to nameplates, documentation, and clearly identifiable data. Scope of delivery and condition, see pictures. We will be happy to answer any further questions by telephone or message.

Condition: used, total length: 6,800 mm, total width: 2,200 mm, total height: 2,000 mm, Empty weight: 11.000 kg Price: On request Cjdpfjx Iriaox An Nsgu - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 630 - Swing over bed [mm]: 1300 - Carriage turning diameter [mm]: 1000 - Distance between centres [mm]: 4000 - Bed width [mm]: 700 - Spindle bore [mm]: 120 - Min. spindle speed [rpm]: 2.8 - Max. spindle speed [rpm]: 400 - Options: Three-jaw chuck, Four-jaw chuck, Removable bed, Quick-change tool post, Fixed steady, Travelling steady - Swing over removable bed [mm]: 1700 - Transport dimensions: 6800mm x 2200mm x 2000mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: unexamined, machine/vehicle number: DC18330, total width: 2,000 mm, total length: 2,000 mm, We are offering this used Johann Fischer Aschaffenburg measuring plate, type IDT009 – surface plate, spotting plate, marking-out plate, year of manufacture unknown. Manufacturer: Johann Fischer Aschaffenburg Origin: Made in Germany Cjdpfx Aey H Dgbjn Nsgu Type: Measuring plate Item number: IDT009 DC number: DC 18330 Inventory number: QS-00355 Inspection date: 23.3.03 If you have any questions or need further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2005, functionality: fully functional, GEARLESS FLEXOGRAPHIC PRINTING PRESS F&K FLEXPRESS 16S/10 Central impression flexographic printing press Manufacturer: Marga Fischer & Krecke Model: Flexpress 16S/10 Gearless 10 colors Materials that can be printed: PE, PP, OPP, PET, PA. Mechanical speed up to 460 m/min Maximum material width: 1200 mm Maximum printing width: 1150 mm Minimum/maximum print repeat: 370/800 mm Fully automatic turret unwinder and rewinder Unwinder inner diameter: 76 and 152 mm Cedpfezafipjx An Negu Rewinder inner diameter: 76 mm Maximum coil diameter: 1000 mm Thermal oil drying system Corona treater: 2 units AVT 100% camera system Bloss viscometers Year: 2005

Condition: new, Year of construction: 2024, functionality: fully functional, Universal CNC cylindrical grinding machine for high-precision internal & external cylindrical grinding MBF 453U from the MaiBase platform The machine is a completely new development with strong dimensions in a small space! Technical data: Center width: 430 mm Standard center height: 200 mm Grinding length: 400 mm Grinding wheel diameter: 500 mm Z-axis adjustment path: 550 mm X-axis travel: 385 mm Cjdotrf Smepfx An Njgu Dimensions and weight: 2200 x 2500 x 2400 mm // 6500 kg Equipment of the machine: - FANUC Oi-F Plus control system - Grinding headstock (swiveling) with 15kW motor spindle - Workpiece headstock MK5 - Tailstock MK3 with 20 mm stroke (optional 60 mm / 120 mm) - Handwheel for manual axis movement - Z-axis - X-axis - C-axis - B-axis - Glass scales for X- and Z-axis - Internal grinding spindle FISCHER UJ80 - Internal grinding spindle (GMN motor spindle) optional - Dressing spindle attached to the workpiece headstock for rotary dressing - Automatic door drive

Condition: used, Year of construction: 1974, length 450 mm width 250 mm height 1.250 mm Cgodpfsydqnxex An Nou accuracy +/- 1 ° distance between tapping holes H: 130 mm distance between tapping holes V: 150 mm distance between tapping holes H: 70 mm distance between tapping holes V: 200 mm JOHANN FISCHER - Measuring Angle