Used horizontal band saws - automatic - cutting range 300-359mm for sale (91)

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 566-06124, functionality: fully functional, Doall automatic bandsaw in good working condition. Cutting capacity round: 335 mm Year of manufacture: 2006 Itjdpfox A S Agex Ah Dek

Condition: used, cutting diameter / mm saw band length / mm Ijdpfx Aezu Daush Dotk cutting width / mm Manufacturer: KASTO Type: SSB 260 VA Machine type: Fully automatic band saw Design: Hydraulic, automatic feed Cutting range (round): approx. 10–260 mm Cutting range (square): approx. 260 × 260 mm Minimum cut length: approx. 5 mm Automatic feed: approx. 600 mm Multiple feed: up to approx. 5,400 mm (depending on version) Cutting speed: approx. 15–125 m/min, infinitely variable Saw band length: approx. 4,115 mm Saw band width: approx. 38–41 mm (depending on version) Saw band thickness: approx. 1.0–1.3 mm Saw motor: approx. 4.0 kW Total connected load: approx. 6.5 kW Machine weight: approx. 2,000–2,200 kg Dimensions: approx. 2,160 × 2,080 × 2,015 mm (depending on version) SUBJECT TO CHANGE AND WITHOUT GUARANTEE – TECHNICAL DATA

Condition: used, Year of construction: 1996, cutting diameter / mm saw band length / mm cutting width / mm Manufacturer: KASTO Type: HBA 360 AU Year of manufacture: 1996 Machine number: 6016 109 181 Weight: approx. 2,600 kg Isdpfx Ahjzu A Tyj Detk Electrical connection: 400 V Frequency: 50 Hz Power supply: 3~ (three-phase current) Connected load: 10.0 kW Rated current: 35.0 A Maximum cutting range: approx. 360 × 360 mm Maximum round cut: approx. 360 mm Saw band length: approx. 5,334 mm Saw band dimensions: approx. 41 × 1.30 mm (depending on version) Cutting speed: approx. 14–102 m/min Automatic material feed: approx. 600 mm stroke Saw band drive: approx. 5.5–6.0 kW Version: automatic high-performance band saw machine Suitable for sawing round, square, and profile material CE marking present Note: The technical data listed above has been compiled based on the nameplate of the specific machine and available information regarding the KASTO HBA 360 AU. Individual technical specifications may vary depending on the year of manufacture, serial number, and equipment configuration. SUBJECT TO CHANGE AND WITHOUT GUARANTEE – TECHNICAL DATA

Condition: used, cutting diameter / mm Itedpfjzu A Tmsx Ah Dsk saw band length / mm cutting width / mm

Condition: good (used), Description Used band saw machine Year of manufacture: 2006 Technical specifications: Cutting speed: 40/80 m/min Saw band: 3320x27x0.9 mm Cooling: liquid/mist lubrication CAPACITIES: 0° - 300 mm Ø - 260 mm square - 330 x 260 mm 45° left - 260 mm Ø - 250 mm square - 270 x 200 Iedpfxezu R Dts Ah Dstk 60° left - 180 mm Ø - 170 mm square 45° right - 200 mm Ø - 180 mm square - 200 x 160 mm

Condition: used, Year of construction: 1990, cutting diameter 340 mm saw band length 5334 mm cutting width 340 x 340 mm Ijdpjt Tqlbofx Ah Detk dimensions of saw-band 5334 x 38 x 1,3 mm min. cut-off length 6 mm multiple feeding length 5400 mm cutting speed 20 - 130 m/min power capacity 5,5 kW voltage 380 V total power requirement 8,0 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2,85 x 2,30 x 2,10 m Horizontal automatic band saw.

Condition: good (used), Year of construction: 2009, Thomas Super Trad 350 AO CN, a fully automatic bandsaw from 2009. This professional machine is designed for the precise and efficient cutting of steel, stainless steel, aluminum, and other metals. Thanks to its fully automatic operation, the machine is suitable for both serial production and single-piece work. Year of manufacture: 2009 Iodjzur Aqopfx Ah Dotk Fully automatic CNC control Hydraulic material feed, clamping, and Automatic saw blade movement Miter cutting up to 60° Integrated coolant system and mist lubrication system User-friendly operation Includes bundle clamps for cutting bundles Technical specifications Cutting capacity 90°: Ø 270 mm / rectangle 350 × 240 mm Cutting capacity 45°: Ø 230 mm / rectangle 230 × 150 mm Cutting capacity 60°: Ø 140 mm / rectangle 140 × 140 mm Saw blade speed: 36 and 72 m/min Saw blade dimensions: 2,925 × 27 × 0.9 mm Maximum clamping opening: 355 mm Motor power: 2.0 kW Weight: approx. 1,180 kg

Condition: used, Year of construction: 2008, cutting diameter / mm saw band length / mm Iedpewm Rqtefx Ah Dotk cutting width / mm including roller conveyor 4000 x 500 x 850 mm Sawing diameter (round): 260 mm Sawing diameter (square): 260 mm Sawing diameter (rectangular): 300 x 260 mm Saw blade dimensions: 4200 x 34 x 1.1 mm High-performance band saw automatic machine, heavy-duty hydraulic production band saw Parallel sawing feed system in profile guide rails Mitsubishi NC program control E1032 for preselection of 90 sets, each with a specific quantity and corresponding cut length PLC control Mitsubishi With Siko incremental encoder Material feed with ball screw spindle 950 mm in one stroke, any desired cut length from 3 mm – 9999 mm Hydraulic material clamping with long-stroke cylinder, opening on both sides Material clamping with double vice in front of and behind the saw blade Remaining piece length in automatic mode: 90 mm Max. cutting length in automatic mode: unlimited Material support height: 850 mm Net weight: 2300 kg Dimensions W x H x D mm: 2580 x 2000 x 2000

Condition: excellent (used), Year of construction: 2017, cutting diameter 350 mm saw band length 4780 x 34 x 1.1 mm capacity 90 degrees: flat 500 x 340 mm capacity 45 degrees: round + 350 mm capacity 45 degrees: flat + 380 x 340 mm capacity 60 degrees: round 230 mm capacity 60 degrees: flat 220 x 340 mm capacity 45 degrees: round - 350 mm capacity 45 degrees: flat - 220 x 340 mm coolant capacity ca. 100 l band speed 20 - 100 m/min Control SIEMENS voltage 3x 400 V total power requirement 3.0 kW AC weight 2150 kg range L-W-H 3030 x 3150 x 2000 mm In very good condition Demo machine from the manufacturer PEGAS With a wide range of special features Original price about 60.000 euros Special price upon request Features: - Robust, highly efficient electro-hydraulic miter band saw Ijdpfjzqgf Sjx Ah Dstk * Fully automatic (INDUSTRIAL) = with automatic material feed * Model: Two-column band saw * Maximum stability and vibration damping during cutting * Powerful saw band drive with a 3.0 kW motor - Material feed unit with ball screws * "Longstep feed gripper" for a maximum feed length of 1.000 mm - Includes SIEMENS PLC control unit * Selectable semi-automatic or fully automatic cycle * 200 programs, each with 99 programmable cut lengths and quantities * When the remaining length is 500 mm, the machine interrupts the sawing cycle * Protection against damage or jamming of the material - For angles from 0° to 60°, with a ball-bearing rotary table * Programmable CNC adjustment of the miter angle * Right (0° to 60°) and left (0° to 45°) * Stepless adjustment of the miter angle * Adjustment via a robust gear train - Saw blade guides made of carbide plates - Saw feed infinitely adjustable via a fine-adjustment knob - Sturdy machine bed and torsion-resistant saw frame - Infinitely variable speed adjustment of the saw blade - Coolant system - Operating instructions for the machine and control system

Condition: good (used), Year of construction: 2002, cutting diameter 325 mm capacity 90 degrees: flat 500 x 300 mm capacity 90 degrees: square 325 x 325 mm cutting speed 35 / 70 m/min capacity 45 degrees: round 300 mm capacity 45 degrees: square 300 x 300 mm capacity 60 degrees: round 200 mm capacity 60 degrees: flat 200 x 200 mm capacity 60 degrees: square 200 x 200 mm saw band length 4200 x 27 x 0.9 mm work height max. 750 mm total power requirement 2,2 kW weight of the machine ca. 1.300 kg. range L-W-H 2230 x 2100 x 1280 mm Original price approx. 35.000 - 40.000 euros Special price upon request Machine from a workshop for people with disabilities Features: - Robust electro-hydraulic band saw - FULLY AUTOMATIC * With manual miter adjustment - Continuously variable hydraulic adjustment of clamping pressure - Control switch for manual functions - Single/multiple stroke selectable - Single cuts possible - 2x hydraulic vertical clamps (bundle clamping device) - Control panel on the front of the machine - Operating instructions (PDF) Additional technical data: - Single stroke: 0 - 600 mm - Multiple stroke: 0 - 6.000 mm Iodpfszqgf Eox Ah Dstk - Lowering speed: 0 - 300 mm/min. (continuously variable) - Max. material weight: 250 kg/m.

Condition: good (used), Year of construction: 2006, cutting diameter 335 mm capacity 90 degrees: flat 500 x 335 mm saw band length 4400 x 34 x 1.1 mm speed 15.0 - 150 m/min work height max. 750 mm workpiece weight 250 kg/m coolant tank capacity 80.0 ltr. oil volume 30.0 ltr. power capacity 5.5 kW weight of the machine ca. 1800 kg range L-W-H 2000 x 2200 x 1900 mm current list price: approx. 45.000 euros Isdpfjzn Ahqex Ah Dstk Special price available upon request Features: - MEBA - Fully automatic "two-column linear guide system" * Fully automatic machine for 90° cuts only - Automatic material feed - Continuously variable lowering speed 0â??300 mm/min - Band saw speed controlled by frequency-regulated AC drive (15â??150 m/min) - Automatic cutting pressure and feed monitoring - Hydraulic full-stroke material clamping - Automatic movement of the clamping blocks - Operatorâ??s manual

Condition: used, Year of construction: 2007, 410 mm 430x410 mm capacity 90 degrees: round 410 mm capacity 90 degrees: flat 700x410 mm 410 mm 500x410 mm 320 mm 320x410 mm dimensions of saw-band 5800x41x1,3 mm Iodpfx Aeztft Teh Djtk total power requirement 5,5 kW weight of the machine ca. 3.500 kg dimensions of the machine ca. 3500x2800x2000 mm

Condition: repair required (used), Cutting capacity round Ø 300 mm Cutting capacity rectangular 305 x 305 mm Saw blade speed approx. 25-108 m/min Saw blade drive 4 kW Itodpfx Aewqcahsh Dek Incl. hydraulic saw blade tensioning Incl. coolant system Incl. various replacement bands

Condition: good (used), Year of construction: 2014, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut Isdezkbn Ujpfx Ah Dotk - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: good (used), Year of construction: 1998, machine/vehicle number: 19263.98, Offer 24149 Technical data: - Cutting area at 90° round 320 mm - flat 300 x 270 mm - Material feed stroke up to 500 mm - Multiple strokes unlimited - Remaining piece length in automatic mode 125 mm - Saw band dimensions 3900 x 27 x 0.9 mm - Cutting speed 17 to 106 m/min - Hydraulic lifting - lowering of the saw frame Iodpfx Ahjvvim To Djtk - Upper stroke limit of the saw frame - Cutting pressure continuously adjustable 0 - 10 m/min - Hydraulic material vice - Chip conveyor - Saw band cleaning brush - Coolant device - Drive 400 V / 2.2 kW - Space requirement approx. W 2300 x H 1700 x D 2600 mm - Weight approx. 1700 kg - Roller conveyor 2000 mm

Condition: good (used), Year of construction: 1992, machine/vehicle number: 5164, Offer 23148 Technical data: - with hydraulic clamping and feed device - Cutting range round 320 mm Itodpfx Aeq Evn Esh Dok - square 300 x 300 mm - large cut-off length with single stroke up to 400 mm - Multiple feed up to 10 x 400 mm - Saw blade dimensions 3660 x 25 x 0.9 mm - Infinitely variable cutting speed 20 - 100 rpm - Hydraulically infinitely variable feed speed - Coolant device - Material support height 720 mm - Saw band - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg

Condition: good (used), Year of construction: 2000, machine/vehicle number: 6535, Offer 25230 Hydraulic Twin-Column Guided Bandsaw Machine Technical Specifications: - Automatic operating cycle for the cutting process, hydraulic lifting/lowering of the saw frame - Manual mitre adjustment with hydraulic clamping - Automatic material feed unit, motorized mitre adjustment - Saw blade dimensions: 4400 x 34 x 1.1 mm - Infinitely variable cutting speed: 15 – 150 m/min - Infinitely adjustable cutting pressure: 10 – 15 bar - Feed rate: 0 – 300 mm/min Itodpfx Ajw I Scfeh Dsk - Cutting range at 90° – Max round: 335 mm – Max square/flat: 500 x 335 mm - Automatic material feed: 5 – 2300 mm - Drive: 400 V / 6.5 kW - Space requirement (approx.): W 2400 x H 1950 x D 2200 mm - Weight (approx.): 1800 kg

Condition: good (used), with cooling pump Itsdpfx Aozrzx Noh Dok

Condition: new, Year of construction: 2022, You have a Behringer saw and your control panel is defective, the membrane keypad is broken, but the machine is still too good to replace. The BT 41 is a very common control panel and we can repair it for you! Please contact us. Itodpfx Aotv Ip Ieh Dok

Condition: used, Year of construction: 2016, Machine type : Horizontal bandsaw, dual-column Manufacturer : Behringer Model : HBP 313 Serial number : 10009454 Year of construction : 2016 Cutting capacity (round) : Ø 310 mm Cutting capacity (rectangular) : 310 × 310 mm Blade dimensions : 4,470 × 34 × 1.1 mm Blade speed : 15 to 110 m/min (adjustable) Control type : Semi-automatic Blade guide : Carbide Feed descent : Hydraulic Clamping system : Hydraulic vice Power supply : 400 V / 50 Hz / 3~ Itjdpfx Asw Dd Rush Dok Motor power : 4 kW Machine Application The Behringer HBP 313 is a horizontal bandsaw designed for precise cutting of profiles, solid bars, tubes, and full-section steel. It is ideal for metal fabrication shops, steel structure production, and sawing centers. Features / Differences – Dual-column frame ensures stability and rigidity during cutting. – Fully hydraulic system for saw frame feed and material clamping. – Carbide blade guides provide straight, vibration-free cuts. – Wide blade speed range (15–110 m/min) adapts to various steel grades and materials.

Condition: used, Year of construction: 2008, cutting diameter 335 mm saw band length 4400 mm table height 750 mm 500 mm 335 mm 500 x 335 mm re. 330 li. 305 mm cutting speed re. 320x335 li. 305x335 mm down speed re. 180 mm dimensions of saw-band re. 170 x 335 mm workpiece weight 18 - 115 m/min Itjdpfx Aezdu Uzsh Dsk capacity 90 degrees: round 0 - 300 mm/min. capacity 90 degrees: flat 4400 x 34 x 1,1 mm capacity 45 degrees: round max. 250 kg/m 4,0 kW work height max. 2400 kg connected load 3500 x 2350 x 1900 mm Features: - Material bundle clamping - Automatic feed - Laser light for cut line indication - Micro-dosing device - Motorized chip brush - Clamping pressure control on the control panel - Fully automatic sawing process after entering the length and quantity - Operating instructions

Condition: used, Year of construction: 1981, cutting diameter 320 mm saw band length 4670 mm cutting width 580 mm total power requirement 7,4 kW weight of the machine ca. 3 t Sawing range, circular, max. 100 - 320 mm vertical, max. 100/100 x 320/460 mm Length of cut, min./max. 0 - 580 mm Distance from column to saw band, max. 690 mm Cutting speed, infinitely variable 16 - 160 m/min Dimensions of saw band, length x Ø approx. 4,670 x 38 mm Length of remaining pieces, automatic/single cut 100/10 mm Saw blade drive, approx. 4.4 kW Total electrical load, approx. 7.4 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features: * Infinitely variable speeds of saw blade motor via servo motor and STOEBER drive. Display of cutting speed on control panel. * Infinitely variable settings of sawing feed with display of the current cutting speed. * Workpiece counter: Number of workpieces can be preset. Selection switch for single cuts / multiple cuts. * Display for band tension and cutting feed. * Automatic motor-driven material feed, controlled by a positioning processor, Model PP 160, with input of the appropriate lengths using a roll conveyor approx. 1,500 mm, with enlargement approx. 2,000 mm. And with a stable roll conveyor for the exterior area, 3,500 mm. * Built-in chip conveyor with coolant device. * Built-on switch cabinet. Condition : Good. Machine can soon be inspected under power. Itsdpfot Hwrnox Ah Dek Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of saws on stock. Please let us know your requirements.

Condition: good (used), Year of construction: 2004, functionality: fully functional, cutting height (max.): 200 mm, cutting width (max.): 250 mm, total height: 1,750 mm, total length: 2,500 mm, total width: 2,300 mm, overall weight: 2,500 kg, For sale is a fully functional KASTO twin AE3 – a robust horizontal bandsaw machine for the reliable and economical cutting of solid and profile materials in general mechanical engineering, as well as in series and single-piece production. With a maximum material width of approximately 250 mm and a clamping height of approximately 200 mm, the machine is suitable for clean cutting of a wide variety of materials and cross-sections. Ijdpfx Ahszk Hd Us Djtk The well-thought-out design, with a feed length of approximately 2200 mm and a material discharge length of approximately 1600 mm, ensures a comfortable and efficient material flow. The machine is complemented by two discharge roller conveyors, each with a length of approximately 1000 mm, resulting in a total material discharge length of approximately 4000 mm – ideal for the safe handling of even longer workpieces. The compact design, with dimensions of 2500 x 2300 x 1750 mm and a weight of approximately 2500 kg, offers high stability and smooth operation, which has a positive effect on cutting quality and service life. The scope of delivery also includes approximately 8 spare saw blades, which enable immediate and uninterrupted use of the machine. Overall, this is a reliable and versatile bandsaw machine that combines precision, performance, and efficiency in industrial production. --- Optional accessories A conveyor belt in lengths of 310 cm and 420 cm can be purchased separately to optimize material flow and provide comfortable handling of the cut material. --- You are welcome to inspect the machine in our workshop while it is running. If you are interested, we will gladly send you demonstration videos of the machine. Upon request, we offer delivery and commissioning of the machine as part of a comprehensive, hassle-free package. You are in the best hands with us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG

Condition: good (used), Year of construction: 2014, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length Ijdpfx Aszc Rv Hjh Djtk * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: new, Year of construction: 2026, machine/vehicle number: K00629, functionality: fully functional, operating hours: 2 h, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 320 mm, cutting width (max.): 320 mm, control type: PLC-controlled, total height: 2,100 mm, total length: 2,600 mm, total width: 2,000 mm, Equipment: CE marking, documentation/manual, lighting, With the bandsaw automation system SA 320 ZA, the Sägemaschinenfabrik Bauer GmbH offers a powerful, fully automatic sawing solution for demanding series production. The robust, column-guided design ensures the highest cutting accuracy, long service life, and reliable operation – even in multi-shift operations. Itjdpjzqdtyofx Ah Dek Whether in the steel trade, metal construction, mechanical engineering, or contract manufacturing, the SA 320 ZA impresses with its high productivity, ease of operation, and durable quality.