Used horizontal band saws - automatic - cutting range from 400mm for sale (97)

Condition: used, Year of construction: 1994, cutting diameter 520 mm saw band length 7239 mm cutting width 1,3 mm Control POSIMOD cutting range - square - 520 x 520 mm feed length 500 mm feed length: multiple 4500 mm min. cut-off length 6 mm length of rest piece min/max 10 / 100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm sawing motor 5,5 kW total power requirement 10,0 kW Djdpewm Rm Ijfx Aaxjki weight of the machine ca. 3,8 t dimensions of machine L x W x H 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant

Condition: good (used), Year of construction: 2011, machine/vehicle number: 152855, Item 25078 Technical specifications: - Cutting area at 90°: round 550 mm - flat 570 x 550 mm - Cutting speed continuously adjustable from 20 to 100 m/min - Hydraulic raising and lowering of the saw frame - Cutting pressure continuously adjustable from 0 to 10 m/min - Automatic material feeder - Stop length 500 mm - Total drive power approx. 400 V / 5.7 kW - Stop Dkjdpfx Aasv Say Ajxoi - 2 x roller conveyors 1000 + 3000 mm - Space requirement approx. W 3400 x H 2100 x D 1300 mm - Weight approx. 2100 kg

Condition: used, Year of construction: 2001, Wheel diameter 680 mm sawblade length 8550 mm Sawblade width max. 1,3 mm Cutting height mm Motor output 20 kW Table dimensions 600 x 620 mm Feed speed m/min. Dedpet Hw Uijfx Aaxeki Machine height mm Weight 10.000 kg Bandsaw horizontal, Precision-Saw for Silicon (Solar industry)

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 mm capacity 45 degrees: round 680 mm capacity 45 degrees: square 600 mm capacity 45 degrees: flat 870x600 mm capacity 60 degrees: round 580/550 mm capacity 60 degrees: square 530/450 mm capacity 60 degrees: flat 550x450 mm saw band length 8140 x 54 x 1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 5,3 t dimensions of the machine ca. 5,75 x 4,2 x 2,75 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. Dodpsfg E Hnjfx Aaxoki The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t Dsdpfx Aofgyigsaxski dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 capacity 45 degrees: round 550 mm capacity 45 degrees: square 550 mm capacity 45 degrees: flat 550x600 mm capacity 60 degrees: round 370 mm capacity 60 degrees: square 370 mm capacity 60 degrees: flat 370x600/450 mm saw band length 7260 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Dksdpfofg E Hmjx Aaxoi Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, 460 mm 460 mm 460 x 460 mm saw band length 5450 x 41 x 1,3 mm table height 800 mm band speed 20 - 100 m/min total power requirement 5,5 kW weight of the machine ca. 3,2 t dimensions 2,675x 2,15 x 2,05 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush Dodefg E Hvspfx Aaxoki • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: new, 550 mm 550 mm 550 x 550 mm saw band length 5980 x 41 x 1,3 mm table height 800 mm band speed 20 - 100 m/min total power requirement 5,5 kW weight of the machine ca. 3,8 t dimensions 3,0 x 2,15 x 2,2 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms Dedpfefg E Hwox Aaxeki • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 480 mm 610 x 450 saw band length 5320 x 34 x 1,1 mm band speed 15 - 100 m/min table height 820 mm total power requirement 3,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,8 x 2,2 m For miter cuts up to 45° left in fully automatic Operation and up to 60° left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed automatic length compensation Button on the saw band for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off when idling Mechanical chip clearing brush feed vice opening on both sides Remaining piece length 100 mm Modern CNC control freely programmable for multiple sawing jobs with various Dodsfu Nbbopfx Aaxoki Cutting lengths and quantities. Automatic feed unit 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for section lengths of 25 – 9,999mm. Fully hydraulic control of saw frames and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 saw band length 5850 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,45 t dimensions of the machine ca. 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. Djdpfefgyifjx Aaxoki The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, 1000 mm 1000 mm 1200x1000 mm saw band length 11300 x 80 x 1,3 mm table height 790 mm band speed 14 - 60 m/min total power requirement 18 kW weight of the machine ca. 9,0 t dimensions 5,0 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong Dksdpst Eacgsfx Aaxoi reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: not inspected (used), Year of construction: 2000, machine/vehicle number: 44650046, functionality: unexamined, cutting height (max.): 400 mm, saw band length: 4,570 mm, saw band speed: 1,500 mm/s, saw band width: 41 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obliges collection within the period from 28.07.2025 to 31.07.2025. TECHNICAL DETAILS Cutting capacity round material: Ø 406 mm Cutting capacity square material width: 400 mm Cutting capacity square material height: 400 mm Maximum machine load capacity: 2,500 kg Maximum roller conveyor load capacity: 2,000 kg/m Min. workpiece remnant length ensuring clamping edge: 76 mm Djdpfx Aewvhxaeaxeki Min. workpiece remnant length without workpiece detection: 30 mm Saw blade dimensions: 41 x 1.3 x 4,570 mm Cutting speeds: 15 to 90 m/min (50 Hz) Cutting speeds: 17 to 90 m/min (60 Hz) Clamping device pressure adjustment: 570 – 1750 N Cut-off length: 10 to 5,040 mm Increments: 0.1 mm Single feed: 570 mm MACHINE DETAILS Installation dimensions: 5,200 x 2,350 x 2,000 mm Weight: 2,950 kg Saw drive motor: 5.5 kW, 4 pole Hydraulic pump motor: 1.5 kW, 4 pole Coolant pump motor: 0.18 kW, 2 pole Connected load: 12.3 kVA Machine dimensions length: 3,006.5 mm Machine dimensions width: 3,288 mm Machine dimensions height: 2,564 mm Working height: 842 mm Hydraulic oil tank: 40 litres Cutting fluid tank: 120 litres EQUIPMENT - With technical documentation - Additional roller conveyor - Support length: approx. 2,000 mm - Total support length: approx. 5,040 mm

Condition: good (used), Year of construction: 1997, functionality: fully functional, For sale: 1 used horizontal band saw including infeed, outfeed, and loading magazine Manufacturer: Behringer Type: HBP430/854GA5000 Equipment: Dkedswhcv Repfx Aaxji 2x cross-transport chain conveyors, driven roller conveyor, stop system Saw drive: Dietz 7.5 kW Flat cutting capacity: 90° 880 x 500 mm / 45° mm Round cutting capacity: 90° 500 mm / 45° mm Saw blade speed: continuously adjustable Saw blade: 7200 x 40 mm Coolant system: Cooling water Installation dimensions: 26500 mm / 6000 mm / H2100 mm Weight: 16000 kg

Condition: good (used), Type RHP 430 A CN Reference C2184 Dedpfx Aowlh Dzsaxski Maximum cutting capacity: 430 mm Maximum flat cutting capacity: 430 x 430 mm One-time feed length: 600 mm Feed table Chip conveyor Minimum cutting capacity: Ø: 10 mm Minimum flat cutting capacity (W x H): 10 x 8 mm 20-combination programmer.

Condition: ready for operation (used), Year of construction: 1990, machine/vehicle number: A3-51086-290307, functionality: fully functional, overall weight: 6,000 kg, cutting range round steel at 90°: 650 mm, cutting range square steel at 90°: 650 mm, cutting speed: 90,000 mm/min, opening width: 800 mm, TECHNICAL DETAILS Cutting Range Cutting capacity 90° round: 650 mm Cutting capacity square: 650 x 650 mm Cutting capacity rectangular: 780 x 650 mm Saw Blade Dksdpfx Ajw Ew Nyjaxei Bandsaw blade: 8,800 x 50 x 1.6 mm Cutting speed: 18 to 90 m/min (stepless) Clamping Range Fixed jaw: 900 x 420 mm Movable jaw: 240 x 420 mm Opening: 800 mm Cutting Speeds (examples) Automatic steel with tensile strength up to 50 kp/mm²: 80 - 100 m/min Structural steel with tensile strength up to 40 kp/mm²: 60 – 80 m/min Tool steel with tensile strength 50 – 70 kp/mm²: 40 – 50 m/min Further cutting speeds can be found in the attached images. MACHINE DETAILS Connection: 12 kW Dimensions & Weight Weight: approx. 6,000 kg Dimensions: 4,000 x 1,400 x 2,900 mm EQUIPMENT Roller conveyor (2,000 x 1,200 x 750 mm)

Year of construction: 2013, condition: used, cutting diameter 420 mm saw band length 41 x 5600 mm cutting width 1,3 mm Control Simatic S7 Touch band speed 17 - 110 m/min sawing motor 7,5 kW diameter of round bars 420 x 3000 mm diameter of round bars 300 x 6000 mm total power requirement 30 kW weight of the machine ca. 18,5 t dimensions of the machine ca. 12,5 x 5,0 x 2,5 m CNC sawing machine with band saw JAESPA Compact 4S and round steel magazine and discharge gripper for sawing round bars from 50 - 420 mm and 6 pockets with Dodod Izmaepfx Aaxjki a max. bar weight per pocket of 3400 kg. Cut-off lengths 20 - 1000 mm. As good as new condition, approx. 1,000 working hours.

Condition: used, Year of construction: 2009, cutting diameter 15 - 560 mm 560 x 630 mm dimensions of saw-band 7.400 x 54 x 1,60 mm Control KASTO material feed - single 900 mm multiple feeding length max. 9.999 mm Djdpovxwkfsfx Aaxeki cutting length min. 6,00 mm sawing motor 5,50 kW cutting speed 13 - 127 m/min height of material-table 700 mm total power requirement 12,00 kW weight of the machine ca. 6,00 t dimensions of the machine ca. 3,70 x 2,50 x H2,50 m Automatic two-column band saw with KASTO Compact Control; frequency-controlled saw band drive; chip conveyor; infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1m and outfeed roller 2m; Machine can be inspected under power.

Condition: used, functionality: fully functional, Istech 431 NC bandsaw, year 2007, round cutting capacity 430 mm, square cutting capacity 430x430 mm, cutting stroke 500 mm, blade motor power 5.5 kW. Dimensions: 240x260x260(h) cm, Weight 3500 kg. Dkedpewvqpusfx Aaxji

Condition: used, Year of construction: 2009, machine/vehicle number: 0074GFT, functionality: fully functional, operating hours: 12,000 h, cutting height (max.): 850 mm, total height: 2,500 mm, total length: 2,500 mm, total width: 2,500 mm, cutting range round steel at 90°: 850 mm, cutting speed: 5 mm/min, feed length X-axis: 600 mm, saw band length: 9,170 mm, saw band width: 67 mm, Automatic band saw SOITAB mod. 850 SUP.AUT, used, overhauled, 6 months warranty Year of construction 2009 machine features: - cutting arch on square columns with linear bearings on tempered tracks - hydraulic bar feed with double speed Dedsway Dijpfx Aaxoki - belt speed variator with vector inverter, - electronic cutting arch descent with endless screws - motorized blade cleaning metal brush - blade development 9170x67x1.6 - double clamp, for reducing the end of the bar to zero - cutting capacity round diam. mm. 850 flat mm. 920 - computer for choosing the cutting length, no. of pieces, and any variation of cutting length on the same bar. - chip evacuator - automatic, hydraulic belt tension - automatic blade guide width adjustment - enhanced motor - reinforced reducer

Condition: excellent (used), Year of construction: 2019, operating hours: 4,135 h, overall weight: 3,500 kg, table height: 740 mm, coolant pump power: 1,500 W, saw band length: 5,300 mm, saw drive: 5,500 W, Saw from the year of production 2019 / post-show saw - first launch in 2021. Dedpsuiu Sijfx Aaxoki Saw in very good technical and visual condition. Technical parameters in the photo above. Price without rollover.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, operating hours: 11,000 h, 1. Applications & Design Designed as a horizontal bandsaw with a table layout, this machine is ideally suited for use in forges, rolling mills, die casting operations, steel finishing facilities, and tool & mold manufacturing environments. Its low table height enables installation directly on standard shop floors, simplifying material transport and handling. 2. Cutting Capacity Cutting range for round material (90°): up to 1,100 mm Cutting range for flat material (90°): up to 1,100 × 1,100 mm (Approximately 43.3 × 43.3 inches) 3. Performance & Drive System Drive power: 15 kW Saw blade speed: Infinitely adjustable between 8 – 84 m/min Total installed power: 30 kW Saw blade dimensions: 14,330 × 80 × 1.6 mm 4. Table Specifications Table size (L × W): 3,000 × 1,500 mm Maximum table load: up to 30,000 kg Workpiece support height: 700 mm Dkjdpew Tulgefx Aaxoi 5. Machine Footprint & Weight Overall length: 6,000 mm (approximate) Width: 8,100 mm (approximate) Height: 3,850 mm (approximate) Machine weight: around 16,000 kg 6. Notable Features & Options Independent traversable clamping system: Both the material clamping vice and the blade guide arms are independently movable, allowing large or oversized workpieces to be securely clamped without manual repositioning to a fixed side. Robust gantry frame: Two solid columns and support bars provide excellent stability, high load capacity, low vibration operation, and long service life. Optional 90° blade guide rotation: Allows both vertical and horizontal cutting, especially useful for notching sample workpieces. Powered duplex chip brushes: These automatically adapt to keep the saw blade clean during operation, enhancing blade life and reducing maintenance of the brushes. Integrated chip conveyor with coolant tank: Located beneath the cutting zone – collects chips and coolant, can be pulled out easily for cleaning. Open-access design for easy maintenance: All wear and maintenance parts are easily accessible, simplifying servicing, blade changes, and minor repairs. No foundation work required for installation.

Condition: used, Year of construction: 2007, DOALL TYPE: C4100 NC Dkedpfow U N I Eex Aaxsi AUTOMATIC FEED YEAR: 2007