Used horizontal band saws - half-automatic - cutting range 0-300mm for sale (119)

Condition: new, cutting diameter 227 mm Iiedpfxsfgyh Ee Am Djh saw band length 2455 mm table height 840 mm cutting width 260 mm turning speed range: 36 / 72 m/min dimensions of saw-band 2455 x 27 x 0,9 mm capacity 90 degrees: round 227 mm capacity 90 degrees: square 220 mm capacity 90 degrees: flat 260 x 220 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 145 mm capacity 45 degrees: flat 200 x 220 mm total power requirement 1,5 kW weight of the machine ca. 0,25 t dimensions of the machine ca. 0,8 x 1,4 x 1,5 m Miter band saw - automatic cut - Base frame - Coolant pump - Chip brush for cleaning the saw band - Vise with quick adjustment

Condition: new, Year of construction: 2023, ! Machine offer for customers in Lithuania / Latvia / Estonia. Iijdpoiy Rc Rsfx Am Deh The new high-performance automatic bandsawing machines of the HBE Dynamic series, provide performance, ease of use and energy efficiency. You can rely on accurate and fast cuts in easy to difficult to cut materials, in solids, tubes and profiles. The rigid, low-vibration saw frame in cast iron construction and the linear guide system in portal design ensure the best cutting results and maximum blade service life. By the standard servo-downfeed system with BEHRINGER cutting pressure control, the HBE Dynamic series provides short idle times and a precise saw feed movement. The standard cutting pressure control prevents overloading of the saw blade and increases the lifetime significantly. It therefore offers the best conditions for a dynamic, tool gentle sawing. Available models: - HBE261A - HBE321A - HBE411A - HBE511A

Condition: new, cutting diameter 255 mm saw band length 2765x 0,9 x 27 mm cutting width 300 x 180 mm turning speeds 35 + 70 U/min total power requirement 1,8 kW weight of the machine ca. 450 t dimensions of the machine ca. 1,7 x 1,23 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator Iodpfxjfn Andj Am Doih • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t Iiedpsfgyicefx Am Doh dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: new, Bandsaw machine Manufacturer: METALLKRAFT Model: BMBS 300 x 320 HA-DG Art. No.: 3690041 Condition: New machine Iiedpfoilg Hdjx Am Djh Cutting range (round): 300 mm Band speed: 20-100 m/min, infinitely variable Standard equipment includes: - Fully hydraulic, semi-automatic version After starting, the machine automatically tensions the blade, after the cut is complete, it returns to the starting position, stops the saw blade, and opens the clamping device. - Cutting sensor for automatic detection of material height - Horizontal clamping device, mechanical, hydraulic - Monitoring of saw blade tension, electromechanical - Chip removal brush - Measuring stop with a scale of 1,000 mm - Coolant system - Operating manual

Condition: new, 1 brand new semi-automatic horizontal band saw machine with double mitre Make: HUVEMA / Beka-Mak, Origin Türkiye Iodsvyidmopfx Am Doih Model: HU 230 DGH-4 / BMSY 230 DGH Technical data: Cutting range: Round 230 mm Rectangle 320 x 130 mm Square 230 mm -45 ° Round 180 mm -45 ° Flat 230 x 100 mm -45 ° Square 150 mm +45 ° Round 210 mm +45 ° Flat 230 x 160 mm +45 ° Square 180 mm +60 ° Round 120 mm +60 ° Flat 120 x 100 mm +60 ° Square 100 mm Working height 795 mm Main drive motor power 1.0 - 1.3 kW, 400 V, 50 Hz Motor power coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Semi-automatic operation • Hydraulically clamping vice via foot pedal • Mitering on both sides using a swivel frame o The material to be sawn remains straight in space! o No turning of the material during miter cuts! o High efficiency with enormous time savings! • Preset precision stops 0°, 45° and 60° left and 45° right • Replaceable work table • Hydraulic vice, can be moved sideways to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is continuously regulated by a hydraulic cycle, after sawing the arm moves back up automatically and the vice opens • Coolant system • Chip brush • Pivoting control panel • Electric safety switch for blade tension and saw blade cover • Emergency stop switch • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: new, Model Name Iisdpogvkctofx Am Djh Shark 282 SXI evo

Condition: new, Model Name Shark 281 SXI evo Iisdpfxjgvkgle Am Deh

Condition: new, Bandsaw machine Manufacturer: OPTIMUM Model: S 275 NV Item No.: 3300265 Condition: New machine Iodpfxodynpcj Am Doih Cutting capacity (round): 225 mm Cutting speed: 20 - 90 m/min Standard equipment includes: - Horizontal clamping device - Length stop - Automatic shut-off after the end of the cut - Chip removal brush - Coolant system - Operating manual

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 150 mm vice 285 mm turning speed range: 36/72 m/min Iijdpfexaatbex Am Djh dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 460 kg dimensions of the machine ca. 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Condition: new, Saw frame: Schwenkrahmenmeasurements of saw band: 2730 x 27 x 0x9speed of the tape: 35/70cutting area - round: 230cutting area - square: 230cutting area rectangle: 320 x 130messurements (LxWxH): 1350 x 770 x 1300working height: 760coolant pumpmotor: 0.12weight approx.: 525cutting area 45°: rund 210 mm, quadrat 180 mm, rechteck 230 x 160Cutting area 60°: rund 120 mm, quadrat 100 mm, rechteck 120 x 100Cutting area -45°: rund 180 mm, quadrat 150 mm, rechteck 230 x 100motor: 1.3 UZMA 230DG  Hydraulic Bow  Double Mitre  Head  Heavy duty Structural steel machine. Standard Accessories: - M42 Bi-metal saw blade - Variable speed - Inverter control device - Coolant system - Auto. saw blade breakage power off system - Manual  vice - Hydraulic  Bow  - Blade tension Device - Pendant control Iederzx Dlopfx Am Djih - Mitre Head 2 directions  - Heavy Duty Gear Box

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic bandsaw for cutting solid bars and small-sized profiles, offering high performance and excellent precision. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. The bandsaw drive is equipped with a two-speed motor, and the special gearbox, complete with a bronze gear, features a hardened and ground worm gear. Appropriately sized flywheels and robust bandsaw guides are made with sealed ball bearings and adjustable tungsten carbide inserts. Using an electromechanical microswitch control, the bandsaw can be tensioned during blade rotation. Equipped with a safety device to prevent accidents on the flywheel cover and the blade, the machine is completed by a rotating table for supporting the material and a vice with a quick-feed device. Operation: Starting the cutting cycle via the start button, the machine: 1. closes the vice and activates the bandsaw motor 2. lowers the saw frame for cutting 3. the saw frame returns to its starting position 4. stops the bandsaw motor 5. opens the vice Manual cutting option available. Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range: 45° left to 60° right Iisdpfx Amsfh R Tye Dsh Stop for cuts of the same size: Adjustable Electric pump for bandsaw cooling: 0.06 kW

Condition: new, cutting area - round: 280saw band dimension: (LxWxT) 340 x 27 x 0,9cutting area 45°: 230cutting area rectangle: 350 x 220cutting area 45° mitre flat: 240 x 180cutting speed: 20-100weight approx.: 595motor: 1,5 KK Kletzer UBS-S 280 Semi automatic Bandsaw Heavy duty Structural steel machine   Iedorz Uzfjpfx Am Djih Standard Accessories:  - M42 Bi-metal saw blade - *Variable speed  - Inverter control device  - Coolant system  - Auto. saw blade breakage power off system  - Hydraulic vice - Hydraulic Bow - Blade tension Device - Pendant control - Mitre Vice 

Condition: new, Saw frame: Schwenkrahmenmeasurements of saw band: 3160 x 27 x 1,1speed of the tape: 20-100cutting area - round: 270cutting area - square: 270cutting area rectangle: 350 x 220messurements (LxWxH): 2230 x 770 x 1450working height: 910weight approx.: 525Cutting area 60°: rund 150 mm, quadrat 100 mm, rechteck 150 x 100 mmcutting area 45°: rund 240 mm, quadrat 170 mm, rechteck 270 x 210 mmCutting area -45°: rund 210 mm, quadrat 180 mm, rechteck 270 x 210 mmmotor: 1.5coolant pumpmotor: 0,12 Band saw KK Kletzer 270DG Gravity feed Double Mitre  Head  Heavy duty Structural steel machine   Standard Accessories:  - M42 Bi-metal saw blade  - *Variable speed - Inverter control device  - Coolant system  - Auto. saw blade breakage power off system - Manual  vice - Gravity Bow  Bow - Blade tension Device - Pendant control - Mitre Head 2 directions   Ijdorzx Dpjpfx Am Djih - Heavy Duty Gear Box

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 x 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 x 180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: square 110 x 110 mm capacity 60 degrees: flat 110 x 110 mm vice 285 mm turning speed range: 36 + 72 m/min dimensions of saw-band 2950 x 27 x 0.9 mm Control MEP NC coolant tank 95.0 l total power requirement 1.5 / 1.8 kW weight of the machine ca. 435 kg dimensions of the machine ca. 1000 x 2000 mm Iijdpfew U U Uwsx Am Doh Features: - Robust electro-hydraulic semi-automatic band saw (INDUSTRY) - With miter cuts up to 60° - MEP EVO microprocessor control for controlling all functions * Front right, rotatable - Optional manual or automatic saw bow lowering * Continuously adjustable saw bow lowering - Saw blade guide made of carbide plates - Hydraulic saw blade tensioning - including digital value display - 2 saw blade speeds - 1 bi-metal saw blade - Coolant system - 1 angle stop - Chip removal brush - Machine base with forklift pockets - Operating instructions in German Functioning of semi-automatic operation: - Electro-hydraulic clamping of the vise - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vise

Condition: new, Semi-automatic metal bandsaw with high cutting accuracy. This machine allows for stepless 90° cuts, as well as miter cuts, from left 45° to right 30°. (Swivel range: left 45° and right 60°) Standard equipment: - Large, rotatable support table, wear-resistant! (The saw band cutting channel rotates with the miter angle) - Band tension indicator - Hydraulic control of the cast iron saw arm - Hydraulic clamping of the workpiece via short-stroke cylinder - Height limitation of the saw frame via potentiometer from the control panel - Hydraulic cutting pressure adjustment (solid material – pipe) - Lowering of the saw arm via a hydraulic cylinder; stepless adjustment - Manual lifting of the saw arm after the cut - Easy, manual movement of the vise left/right - Electrical band tension monitoring with saw band breakage control - Coolant pump with dual feed to the saw band guides - Carbide saw band guides and guide rollers - Bi-metal saw band M 42 - Chip brush Technical data ● Cutting range: round flat square 90° 278 340 x 275 275 Iiodpfx Aod Dpz Sjm Djh 45° R 260 320 x 255 230 30° R 155 145 x 115 115 45° L 205 145 x 275 180 ● Drive power: 1.5 kW // 400 V // 50 Hz ● Band speed: 20-120 m/min, stepless ● Saw band dimensions: 3125 x 27 x 0.9 mm ● Remaining piece length: 20 mm ● Smallest ø: 5 mm ● Material support height: 775 mm ● Dimensions: 1700 x 1500 x 2100 mm ● Weight: 410 kg

Condition: new,

Condition: new, Showroom promotion... NEW, unit No. 1 available for immediate delivery. CE certified. The MACC SPECIAL 335 MS is a semi-automatic bandsaw for cutting solid bars and small-sized profiles, offering high performance and excellent precision. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. The bandsaw drive is equipped with a two-speed motor and a special gearbox complete with a bronze gear, hardened, and ground worm screw. The appropriately sized flywheels and robust bandsaw guides are made with sealed ball bearings and adjustable Widia inserts. Using an electromechanical microswitch control, the bandsaw can be tensioned with the rotation of the blade. Equipped with a safety device on the flywheel cover and the blade, the machine is completed with a rotating table for supporting the material and a vice with a quick-feed device. Operation: Starting the cutting cycle via the start button, the machine: 1. closes the vice and activates the bandsaw motor; 2. lowers the saw arm for cutting; 3. the saw arm returns to the starting position; 4. stops the bandsaw motor; 5. opens the vice. Manual cutting is also possible. Cutting speed (m/min): 38-77. Cutting thickness (mm): 1.2. Cutting range: 45° left, 60° right. Stop for cutting the same size: adjustable. Electric pump for bandsaw cooling: 0.06 kW. Cutting capacity at 0° (round, square, rectangular): 260 / 250x250 / 220x330. Cutting capacity at 45° left (round, square, rectangular): 225 / 210x210 / 160x225. Cutting capacity at 45° right (round, square, rectangular): 215 / 200x200 / 160x210. Cutting capacity at 60° right (round, square, rectangular): 130 / 130x130 / 130x140. Blade dimensions: 3010x27x0.9. Weight [kg]: 415. Iisdpfxog S Ui As Am Doh

Condition: new, MACC 320 MS semi-automatic bandsaw New item – “CE” marked Technical data sheet attached. Available for immediate delivery, subject to prior sale. The key features of the machine (blade support rigidity, flywheel sizing, blade guide, blade tensioning) have been the subject of careful study in order to prevent blade yielding, increase durability, improve cutting linearity, and reduce cutting time. Isdpsfibfasfx Am Deih Vertical rotation on a spindle with adjustable tapered roller bearings, free of play. Blade drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear. Flywheels sized appropriately. Robust blade guides made with sealed guide bearings and adjustable carbide inserts. Blade tension achieved via an electromechanical device with a microswitch-controlled blade rotation. Safety device to prevent accidents on the flywheel cover, the control knob, and the blade. Cutting thickness: 1.2 mm Cutting range: from 0 to 60° to the right Adjustable stop for cuts of the same size. 0.06 kW electric pump for blade cooling. Operation: Starting the cutting cycle via the start button; the machine: 1. closes the clamp and activates the blade motor 2. lowers the arm for cutting 3. the arm returns to its starting position 4. stops the blade motor 5. opens the clamp Manual cutting option available. ACCESSORIES AVAILABLE UPON REQUEST: Single-phase 69 m/min motor Variable speed drive from 20 to 90 m/min