Used horizontal band saws - manual - cutting range 221-299mm for sale (80)

Condition: used, Year of construction: 2015, cutting diameter 225 mm saw band length 2450 mm cutting width 240 mm dimensions of saw-band 2450 x 27 x 0,9 mm capacity 90 degrees: flat 240 x 160 mm capacity 90 degrees: square 200 mm capacity 45 degrees: round 160 mm capacity 45 degrees: flat 155 x 115 mm Njdpfx Ahox Hp Dxj Uolk capacity 45 degrees: square 140 mm capacity 60 degrees: round 90 mm capacity 60 degrees: flat 90 x 90 mm capacity 60 degrees: square 90 mm weight of the machine ca. 240 kg Features: - Manual band saw machine - One-sided miter - Automatic lowering of the saw bow - Cuts from 0° to 60° left - Coolant device

Condition: good (used), – 2 speeds – Double mitre – Hydraulically adjustable cutting pressure – Cooling system Nlsdpfx Ahox Izkmj Uok – Saw blade 2730 × 27 × 0.9 mm – Emergency stop – 400V

Condition: used, Year of construction: 2005, Technical Data: Cutting Capacity: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm +45° round: 200 mm +45° flat: 200 x 240 mm +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Shortest remnant length: 35 mm Total connected load: 2.0 kW Saw motor, frequency controlled output: 1.5 kW Infinitely variable cutting speed (frequency controlled): 20 – 110 m/min Saw blade dimensions: 2910 x 27 x 0.9 mm Dimensions and Weight: Length, approx.: 1020 mm Width, approx.: 1830 mm Height (upper section lowered), approx.: 1460 mm Height (upper section raised): 1900 mm Nljdpjx Irx Iefx Ah Ujk Material support height: 950 mm Total weight, approx.: 510 kg Equipment: - Carbide saw blade guides, replaceable - Mechanical material clamping - Hydraulic feed for cutting - Mechanical saw blade tensioning - Saw blade cleaning by a driven, easily replaceable wire brush - Coolant system: feed via 1 coolant nozzle and 1 coolant hose, tank capacity approx. 45 l, pump performance 16 l/min

Condition: new, Year of construction: 2025, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Nodpeg U Uv Refx Ah Uelk Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: used, Metal band saw Hans Schreiner MBS270FH, very good condition, 1.5 kW, 260 mm cutting length, 140 mm cutting length, 227 kg Prices subject to change without notice. Errors, misprints, and typographical mistakes excepted. Nsdpfxsx H Ui To Ah Uelk

Condition: new, Year of construction: 2025, Standard Equipment of the MEBAbase 32A Band saw automatic machine with partial enclosure for safe, clean, and quiet operation Torsion-resistant welded construction for high stability and long service life Lateral band guide combining preloaded carbide slide guides and band twist rollers Hydraulic saw feed Infinitely adjustable saw feed speed from 1–300 mm/min Continuous monitoring of cutting pressure and feed, with automatic adjustment if cutting pressure is too high Infinitely variable cutting speed 10–80 m/min Large capacity coolant tank (approx. 90 liters) Automatic band breakage monitoring with automatic shutdown in case of band break Hydraulic saw band tensioning Powered round brush for optimal cleaning of tooth edges Automatic material feed with hydraulic full-stroke material clamping Stable, linear-guided feed vise for maximum positioning accuracy Integrated material end detection Feed vise can be opened on both sides Enclosed roller conveyor with precision, ball-bearing rollers Convenient parts disposal via inclined cut-off chute with coolant return Robust panel controller with touchscreen, menu-guided, intuitive symbols Fully automatic sawing cycle for any length and quantity Simple program creation and management Chip conveyor included as standard equipment Technical Data Type: Straight cut saw 90° Max. Cutting Area Width ↔ (mm): 320 Max. Cutting Area Height ↕ (mm): 320 Max. Cutting Area Ø (mm): 320 Material: Pipe, Round Solid Material, Square Pipe, Square Solid Material Motor [kW]: 5 Saw band [mm]: 4115 x 34 x 1.1 Band speed [m/min]: 10–80 Nlodjxdv Rdjpfx Ah Usk Dimensions (LxWxH) [mm]: 2250 x 2300 x 1700 Weight [kg]: 2000 Working height [mm]: 830 Feed length per stroke [mm]: 500 Degree of automation: Series cutting Options / Additional Equipment Additional chip conveyor or custom chip brush solutions Expanded coolant systems Customizable cutting line indicator (laser) Mounting elements (as required) Technical modifications reserved. The machine is sold under statutory warranty. Details regarding the exact delivery time will be provided in your order confirmation.

Condition: new, cutting diameter 250 mm saw band length 2950 mm cutting width 280 mm dimensions of saw-band 2950 x 27 x 0,9 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 mm Njdpsxz Hhzefx Ah Uslk capacity 60 degrees: round 120 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,4 t Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Description: -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Hydraulic unit for the saw band tension and monitoring with display on Manometer (belt tension = 900 kg) -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band

Condition: new, Year of construction: 2025, S275 Metal Cutting Machine Motor Type - 3-phase induction motor Electrical connection - 400V 50/60Hz Power supply: 400V (three-phase) Protection - IP54 Power - 1.5 HP 1.1 kW Rated current - 400V - 3.6 Amp Speed ​​(RPM) - 50Hz - 2840/1420 Gearbox Transmission ratio - 50Hz - 1:30 Band saw Saw blade dimensions - 2480x27x0.9x6-10mm Blade guide wheel diameter - 293mm Saw blade speed - 50Hz - 45/90mm (m/min) Cooling System Pump Type – 230V 100W Pump Rated Current – ​​0.3 (Amp) Speed ​​– 50Hz-2840 (rpm) Tank Capacity – 10 liters Mechanical Data Njdpfx Aexdbzbeh Uolk Dimensions with base – 1560x990x1665 (mm) Dimensions without base – 1320x510x755 (mm) Shipping Dimensions – 1380x570x890 (mm) Weight – Net – 185 (kg) | Gross – 200 (kg) Noise Level – 70 (dB) Fuse – max. 16 (Amps) Ambient Temperature – 5-35 (°C) Ambient Humidity – 25-80% General: Cutting Angle Adjustment: Via Swivel Arm Saw Blade Guides: Ball Bearing Guide Rollers Saw Arm Lift: Manual Feed: Continuously Adjustable Saw Blade Tension: Manually via Handwheel Band Guides with Bearings and Carbide Tiles Height from Floor to Vice: 910 mm

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Art.no.: 3680013 Condition: New machine Cutting range (round): 230 mm cutting speed: 35/70 m/min standard equipped with: - horizontal vice - length stop (600 mm) Nlodpfxecuntzo Ah Usk - Monitoring of saw band tension, electromechanical - chip clearing brush - coolant device - operating instructions

Condition: ready for operation (used), Bomar automatic band saw in very good condition Capacity: Round 250 mm Square 250x250 mm Rectangle 290x250 mm Cutting speed: 40-80 m/min Dimensions: 1750x1250x1470 mm Weight: 640 kg Includes 6 spare band saw blades and a user manual Nljdpfexur Exjx Ah Uek Program-controlled cutting of pipe, rod, square, solid, and angle bars

Condition: as good as new (ex-display), Hans Schreiner Metal Bandsaw - Demonstration Machine! Hans Schreiner metal bandsaw with pivoting arm, designed for professionals. Features include smooth hydraulic feed for precise cutting pressure, electric coolant system, suitable for all metals, steels, and stainless steel. Equipped with quick-action vise, automatic cut-off, selectable automatic or manual operation. Comes with stand and reinforced frame for increased stability, CE compliant. Technical data: Motor output S6 1900 W (1500 W S6-100% duty cycle), wheel diameter 380 mm, saw blade dimensions 3160 x 27 x 0.9 mm, swivel range 45° left, 60° right, max. cutting capacity at 90°: 370 x 220 mm, cutting speed: 34 / 68 m/min, packaging dimensions (L x W x H): 1770 x 765 x 1120 mm, weight: 365 kg Representative image. Nledpfjvrvu Aex Ah Usk Prices subject to change. Errors, misprints and omissions excepted.

Condition: new, Year of construction: 2025, Fast adjustment of mitre, stepless from 30°-150°. With indication to accuracy on scale. The swivel is directly above the intersection of the saw blade and the fixed vice jaw so that there is a datum measuring point which does no change with the mitre angle. Positive stops at 30° + 45° left and right hand Fast material clamping. Material is always clamped at 90° (parallel) regardless of angle to be cut. Stepless cutting pressure regulation through weight of the heavy and rigid saw frame and the fine tuning depending on cross-section by hydraulic damping cylinder Environmentally-friendly micro spray lubrication system Chip box inside Saw blade drive with end of cut stop Precise saw blade carbide-roller guidance Colour silver grey / blue grey (RAL 7001 / RAL 7031) 1 bandsaw blade 4/6 tpi Instruction manual and spare parts list on CD-ROM Nedpobi S Diofx Ah Uelk Additional standard equipment Hydraulic lift up of saw frame Model Manual Miter 30° left Ø 130mm; square 120x120mm 45° left Ø 200mm; square 180x180mm 90° Ø 260mm; square 300x260mm 45° right Ø 200mm; square 180x180mm 30° right Ø 130mm; square 120x120mm Motor:[kW] 1,8 Saw blade: [mm]3350x27x0,9 Speed: 35/75 m/min Working heigt:[mm] 900

Condition: used, Year of construction: 1994, cutting diameter 260 mm saw band length 4310 x 27 x 0,9 mm table height 810 mm cutting speed 17 m/min total power requirement 3,2 kW Nsdpfxorl U Nme Ah Uelk weight of the machine ca. 920 kg dimensions of the machine ca. 2,5 x 1,7 x 1,5 mm

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Dimensions and weights: Length (product): approx.2129mm Width/depth (product): approx.1046mm Height (product): approx.1687mm Weight (net): approx.645kg Electrical data: Power drive motor: 3kW Supply voltage: 400V Mains frequency: 50Hz Hydraulic pump motor power: 1.4kW Motor power coolant pump: 100W Total connected load: 3.8kW Machine data: Saw blade speed(s): 20 - 80m/min Saw blade length: 3770mm Saw blade width: 34mm Nedpfxorah S He Ah Ujlk Saw blade thickness: 1.1mm Cutting angle: -45 - 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting ranges: Cutting range 0° round (solid material): 355mm Cutting range 0° square (solid material): 300mm Cutting range 0° rectangular upright (solid material): 300 x 490mm Cutting range -45° round (solid material): 290mm Cutting range -45° square (solid material): 250mm Cutting range -45° rectangular upright (solid material): 250 x 250mm Cutting range +45° round (solid material): 350mm Cutting range +45° square (solid material): 290mm Cutting range +45° rectangular upright (solid material): 290 x 340mm Cutting range +60° round (solid material): 230mm Cutting range +60° square (solid material): 180mm Cutting range +60° rectangular upright (solid material): 180 x 220mm

Condition: like new (used), Year of construction: 2024, Bandsaw Machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Part No.: 3680013 Nedjxxy E Uopfx Ah Uolk Year of manufacture: 2024 – demonstration machine Machine No.: 23002271743 Warranty: 6 months, single-shift by manufacturer Metallkraft Cutting capacity (round): 230 mm Cutting speed: 35/70 m/min Standard equipment: - Horizontal vice - Length stop (600 mm) - Electromechanical saw blade tension monitoring - Chip removal brush - Coolant system - Operating manual With the following options: - Minimum quantity lubrication - Factory-installed minimum quantity lubrication system

Condition: good (used), Good working condition. Nodpfx Ahoxvnh Ss Ujlk

Condition: good (used), Cutting range 90° round: 240 mm Square approx.: 260 x 180 mm Saw band: Cutting speeds: Fixed jaw: 310 x 110 mm Moving jaw: 190 x 110 mm Nodpfx Ajimqt Aeh Uelk Opening: 270 mm Equipment: mobile Condition: good Connection: 1,1 kW Weight: 230 kg Dimensions: 1.400 x 800 x 1.300 mm

Condition: good (used), Year of construction: 2021, machine/vehicle number: 2021 102 14, Offer 25300 Technical specifications: - Manual band saw - Saw band dimensions: 2750 x 27.0 x 0.9 mm - Infinitely variable cutting speeds: N 15 / 90 m/min - Max. clamping capacity: 355 mm - Mitre adjustable left and right up to 30° - Cutting range: - 90°: - round: 255 mm - square: 190 mm - flat: 310 x 190 mm - 45° left & right: round 215 mm - Drive: 400 V / 1.5 kW - Coolant system - Weight: approx. 350 kg Nljdpfx Ahsxup Tts Uek - Space requirement: approx. W 700 x H 1600 x D 1700 mm

Condition: new, Model Name Nedpsgvkbcjfx Ah Uslk Shark 282 CCS

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Dimensions and weights: Length (product): approx.1750mm Width/depth (product): approx.1075mm Height (product): approx.1420mm Weight (net): approx.550kg Width/depth max. (product): approx.1415mm Max. height (product): approx.2000mm Electrical data: Power drive motor: 2.2kW Supply voltage: 400V Mains frequency: 50Hz Motor power coolant pump: 0.05kW Machine data: Saw blade speed(s): 36 / 72m/min Saw blade length: 2925mm Saw blade width: 27mm Saw blade thickness: 0.9mm Cutting angle: -45 - +60° Feed: infinitely adjustable Lifting of the saw bow: manual Cutting ranges: Cutting range 0° round (solid material): 270mm Cutting range 0° square (solid material): 230mm Cutting range 0° rectangular horizontal (solid material): 230 x 350mm Cutting range -45° round (solid material): 230mm Cutting range -45° square (solid material): 170mm Cutting range -45° rectangular horizontal (solid material): 140 x 200mm Cutting range +45° round (solid material): 230mm Cutting range +45° square (solid material): 200mm Cutting range +45° rectangular horizontal (solid material): 210 x 220mm Cutting range +60° round (solid material): 140mm Cutting range +60° square (solid material):140mm Cutting range +60° rectangular horizontal (solid material): 140 x 220mm Nlodpfx Ajrah R Toh Uek

Condition: new, Machine in stock and immediately available Double Mitre Metal Band Saw S 255 DG Cutting capacity round / square 90°: 255 mm / 210 x 210 mm Cutting capacity flat 90°: 310 x 210 mm Cutting capacity round / square 45°, right: 220 mm / 210 x 210 mm Cutting capacity flat 45°, right: 220 x 200 mm Cutting capacity round / square 45°, left: 230 mm / 200 x 200 mm Cutting capacity flat 45°, left: 230 x 200 mm Cutting capacity round / square 60°, right: 135 mm / 135 x 135 mm Nljdpjd R Sipefx Ah Ujk Cutting capacity flat 60°, right: 135 x 135 mm Saw blade dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor output S6 40%: 2.2 kW Working height: 930 mm Features: - Double mitre saw with swivelling saw bow from left -45° to right +60° - Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc. in commercial applications - Generously sized, cast saw arm for low-vibration operation - Two band speeds for optimal adaptation to the workpiece - Hydraulic lowering cylinder - Quick-release vice for fast, easy clamping of workpieces - Precise, adjustable saw blade guide for optimal cutting results - CE/IEC certified, German documentation and German service Scope of delivery: - Saw blade - Material stop - Pressure gauge (band tension) - Carbide saw blade guides - Quick-release vice - Integrated coolant system - Hydraulic bow lowering - Motor protection switch - Automatic end stop - Base frame

Condition: good (used), Year of construction: 2012, Band saw is in good working condition. Nedpfsxvnh Ejx Ah Ujlk

Condition: new, Model Name Nedpfx Ahogvkche Uslk Shark 281 CCS

Condition: new, cutting diameter 240 mm saw band length 2730 mm cutting width 270 mm cutting speed 37 + 74 m/min dimensions of saw-band 2730 x 27 x 0,90 mm 240 mm 230 mm 270 x 230 mm 210 mm 200 mm 200 x 210 mm 130 mm 130 mm 130 x 160 mm total power requirement 1,2 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 1,6 x 1 x 1,7 m high-quality processed metal band saw with 2 band speeds, miter up to 60°, automatic cooling and AutoCut feed system - for sawing solid material and profiles execution * High-quality processed and equipped metal band saw for saw cuts best quality * For sawing solid material and profiles made of steel, stainless steel and aluminium * Miter cuts up to 60 degrees left * Saw band speed adjustable in 2 stages Nedpfx Aehhzl Hjh Uelk * Frame and gearbox made from one piece, very quiet and low-vibration cut * Easy, clear miter adjustment with scale * Quick release vice with quick release lever for easy handling * Length stop * Carbide saw band guide * Electrical monitoring of band tension, band breakage and saw band cover. The saw only runs if there is no fault in the monitoring system. * Ergonomic industrial handle * Electric automatic coolant control * AutoCut system with hydraulic cylinder, feed control, spring pack and limit switch * Large machine bed * Machine base in sheet steel construction with front door AutoCut system * Automatic saw frame lowering via the hydraulic cylinder continuously adjustable feed and limit switch at the end of the cut. * High-speed lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed (e.g. for scribing). * Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for release). Due to the brake cylinder, the saw can be moved in any Position to be positioned.

Condition: new, cutting diameter 280 mm saw band length 3370 mm Njdpsivuqtjfx Ah Uolk cutting width 350 mm dimensions of saw-band 3370 x 27 x 0,9 mm 280 mm 250 mm 350 x 200 mm 240 mm 220 mm 230 x 220 mm 170 mm 150 mm 170 x 100 mm saw tape speed 37 + 74 m/min total power requirement 1,8 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,5 x 1,7 x 2,0 m