Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Prepared for the use of attachments on the 5-axis unit Work table and clamping system Nsdpjzuwyzjfx Abpewk ATS work table 8 support rails 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Condition: used, Year of construction: 2014, Main spindle power: 13.2 kW Drilling unit motor power: 7 kW 3-axis machine Drilling unit: Technical data Nedpfjzuwxdjx Abpjwk - Nut saw - 2 horizontal drilling spindles in the X-axis (left/right) - 1 horizontal drilling spindle in the Y-axis (left/right) - 10 vertical drilling spindles

Condition: used, Work area and workpiece capacity Travel range X-axis: 3110 mm Travel range Y-axis: 1620 mm Workpiece passage Y: 1,900 mm Workpiece passage Z: 180 mm Workpiece length in shuttle mode: 1,400 mm Table design: TV FLEX 1600 / FLEXMATIC Number of cross traverses: 6 Positions of traverses: 6 to 12 positions Axis speeds and drive data Maximum vector speed X/Y (PRO-SPACE): 56 m/min Maximum vector speed X/Y (PRO-SPEED): 78 m/min Speed of vertical drilling spindles: up to 8,000 RPM Speed of horizontal drilling spindles: up to 8,000 RPM Max. speed of main spindle: 24,000 RPM Speed of grooving unit/circular saw: frequency-controlled, approx. 2,500-8,000 RPM CNC control and software Operating system: Windows 7 Display: 21.5" LCD Full-HD (16:9) Operation: Keyboard, mouse and machine control panel Software: Maestro CNC Programming: Parametric programming, graphic programming, ISO code, DXF import Machining functions: Milling, drilling, tool management, machining programs Simulation: Graphic simulation of drilling and milling operations TECPAD: 7" touchscreen for machine functions and error messages Mobile operation: Portable control panel for operation along the machine Drilling and grooving unit F23L Vertical drilling spindles: 13 independent spindles (7 clockwise, 6 counterclockwise) Horizontal drilling spindles: 10 independent spindles Arrangement of horizontal spindles: 4 spindles in the X direction on one side, 3 spindles in the X direction on the opposite side, 2 spindles in the Y direction Integrated sawing unit: Grooving and circular saw unit in the X direction Saw blade diameter: 125 mm Motor power of sawing unit: 2.2 kW (approx. 3 hp) Stroke of vertical drilling unit: 75 mm pneumatic stroke Stroke of horizontal drilling unit: 75 mm pneumatic stroke Frequency inverter: Programmable speed control up to 8,000 RPM 5-axis milling unit and tool changing system Main unit: JQX 5-axis milling unit Spindle type: Hiteco HSK-F63 electric spindle Power: 10 kW rated power Peak power (S6): approx. 9.5-15 kW Maximum speed: 24,000 RPM Bearings: Ceramic bearings Cooling: Liquid-cooled spindle Lubrication: Central automatic lubrication system Rear tool magazine TRB 14 Magazine positions: 14 Travel range: 350 mm Pitch: 115 mm Max. tool diameter: 240 mm Max. total tool weight: 70 kg Front tool magazine FAST 14 Magazine positions: 14 Max. tool diameter: 130 mm Max. tool weight per position: 8 kg Max. total weight: 24 kg Vacuum system, workpiece clamping and positioning Vacuum cups: 12 pcs, permanently mounted Dimensions of cups: 145 x 145 mm Height of cups: 75 mm Vacuum pump: Standard 1 vacuum pump Additional vacuum pump: 90 m³/h Workpiece supports: 4 pneumatic workpiece supports Nwedpjzuwurefx Abpek Rear stops: 8 aluminum stops Intermediate stops: 8 aluminum stops Side stop: Left reference stop with laser positioning Preparation for clamping cylinders: Prepared for 6 pneumatic clamping cylinders Extraction and compressed air Connection power: 23 + 28.5 kVA Compressed air consumption: 450 l/min Required extraction capacity: 4,500 m³/h Air velocity in extraction: 25 m/s Extraction nozzle: 250 mm

Condition: excellent (used), Year of construction: 2008, Machining center Nedpfx Aoh E Sghsbpowk Manufacturer: Weeke Type: BHX 500 Year of manufacture: 2008 Machining dimension X: 2,500 mm Machining dimension Y: 1,300 mm Machining dimension Z: 4 - 80 mm Number of routing heads: 2 Number of drilling heads: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Notch saw: can be swiveled 90° Speed, X-axis: 130 m/min Speed, Y-axis: 80 m/min Speed, Z1-axis: 50 m/min Speed, Z2-axis: 27 m/min Rotational speed: 18,000 rpm Dismantled – available immediately

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 30B.11.040.22, functionality: fully functional, TECHNICAL DETAILS Working area, X-axis: 3,300 mm Working area, Y-axis: 1,280 mm Working area, Z-axis: 250 mm Travel, X-axis: 4,000 mm Travel, Y-axis: 1,670 mm Travel, Z-axis: 500 mm Milling spindle Number of milling spindles: 1 Max. spindle speed: 24,000 rpm Main motor power: 11 kW Tool clamping system: HSK-F63 Table design: Cantilever table Table length: 3,300 mm Table width: 1,280 mm Material clamping: Pneumatic Drilling unit Drilling tools available Horizontal drilling spindles: 4 Vertical drilling spindles: 12 Tool changer positions: 12 MACHINE DETAILS Controlled axes: 4 Software: WoodFlash Voltage: 400 V Current consumption: 40 A Connected load: 18 kW Nedpfx Aozrmuvsbpjwk Dimensions & Weight Dimensions (L x W x H): 6,250 x 3,494 x 2,300 mm Shipping dimensions (L x W x H): 5,300 x 2,350 x 2,400 mm Shipping weight: 4,000 kg Shipping packages: 2 EQUIPMENT Sawing unit Vacuum pump Becker PICCHIO 2200, year of manufacture 2022 Safety light curtain Manual control panel Tools CNC documentation with user keys/licenses and USB stick Documentation CE marking

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: AA10000992, functionality: fully functional, TECHNICAL DETAILS Table length: 5,020 mm Table width: 1,380 mm Working area X-axis: 5,020 mm Working area Y-axis: 1,300 mm Working area Z-axis: 250 mm Travel range X-axis: 5,400 mm Travel range Y-axis: 1,650 mm Travel range Z-axis: 450 mm Vector speed X/Y: 35 m/min Maximum speed X-axis: 25 m/min (?) Rapid traverse speed X-axis: 90 m/min (?) Maximum speed Y-axis: 90 m/min Maximum speed Z-axis: 30 m/min Number of milling spindles: 2 pcs. Nwsdpjzrmqkjfx Abpsk Tool clamping system: HSK-F63 Milling spindle 1 Controlled axes: 3 pcs. Spindle speed: 6,000–18,000 rpm Main motor power: 15 kW Milling spindle 2 Controlled axes: 3 pcs. Spindle speed: 600–24,000 rpm Main motor power: 12 kW Tool changer positions: 12 pcs. MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 9,000 x 4,500 x 3,000 mm Total weight: 7,500 kg Machine control: KVARA Operating system: Windows Embedded Standard 7, 64-bit Processor: Intel Pentium, 2.9 GHz RAM: 8 GB DDR4 Hard disk storage: 500 GB, 7,200 rpm Software: XILOG MAESTRO / SCM Maestro Vacuum pump Manufacturer: Becker Number: 1 pc. Motor power: 5.5 kW Suction capacity: 250 m³/h Maximum vacuum pressure: 0.9 bar EQUIPMENT Sliding table 2 vacuum fields 2 reference cams 8 reference noses 8 supports Becker vacuum pump Safety bumper XILOG-MAESTRO software package CE marking

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: AB/224221, functionality: fully functional, operating hours: 19,402 h, working width: 900 mm, milling spindle speed (max.): 18,000 rpm, working length: 3,050 mm, Equipment: CE marking, TECHNICAL DETAILS Working area, X-axis: 3,050 mm Working area, Y-axis: 900 mm Working area, Z-axis: 60 mm Controlled axes: 1 Milling spindle Number of milling spindles: 1 Max. spindle speed: 18,000 rpm Main motor power: 5.6 kW Tool clamping system: ISO 30 Table design: Flat table Table length: 3,960 mm Table width: 840 mm Material clamping system: Pneumatic Drilling unit Motor power: 2.64 kW Horizontal drilling spindles: 6 Vertical drilling spindles: 11 Nwedpfx Abjzrmn Njpok MACHINE DETAILS Software: SCM Maestro Voltage: 400 V Current consumption: 35 A Fuse rating: 63 A Connected load: 10.0 kW Dimensions & Weight Installation dimensions (L x W x H): 4,500 x 1,900 x 2,250 mm Transport dimensions (L x W x H): 2,500 x 1,900 x 2,250 mm Transport weight: 1,600 kg Transport packages: 1 Operating hours: 19,402 h EQUIPMENT Tools Documentation CNC documentation on USB stick User keys/licenses CE marking Saw unit Door interlock switch Safety light curtain Drilling tool

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 0-205-11-7632, functionality: fully functional, working width: 1,600 mm, milling spindle speed (max.): 30,000 rpm, working height: 535 mm, working length: 5,800 mm, TECHNICAL DETAILS Working area X-axis: 5,800 mm Working area Y-axis: 1,600 mm Working area Z-axis: 535 mm Number of milling spindles: 2 pcs. Milling spindle 1 Controlled axes: 4 pcs. Max. spindle speed: 30,000 rpm C-axis: Yes Milling spindle 2 Controlled axes: 4 pcs. Max. spindle speed: 30,000 rpm C-axis: Yes Table type: Beam table Table length: 2,500 mm Table width: 1,500 mm Tool clamping system: HSK-F63 Tool changer slots: 36 pcs. Material clamping system: Pneumatic MACHINE DETAILS Software: WoodWOP Dimensions & Weight Installation dimensions (L x W x H): 12,200 x 9,000 x 3,500 mm Overall length: 26,000 mm Empty weight: 9,000 kg Transport packages: 8 pcs. Vacuum system Number of vacuum pumps: 2 pcs. Vacuum pumps: Elmo Rietschle 2BL2141 Connection diameter: 50 mm Voltage: 400 V Current consumption: 91 A EQUIPMENT Infeed and outfeed system Loading system Unloading system Labeling machine Hand control Nwedpfx Aezrmnpjbpek Chip conveyor Vacuum pumps Tools USB stick with CNC documentation CE marking Documentation Safety fence Door interlock switch Safety light curtain

Condition: used, Year of construction: 2018, operating hours: 10,347 h, total height: 2,400 mm, total length: 7,000 mm, total width: 2,400 mm, Colour: Grey Empty weight: 3.450 kg - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 10347 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Min. spindle speed [rpm]: 600 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 8.5 - - C-axis present: Yes - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 2.64 - └ Horizontal drill spindles [pcs.]: 10 - └ Vertical drilling spindles [pcs.]: 24 - Saw unit present: Yes - Tool changer positions [pcs.]: 25 - System/software: Xilog plus - Safety feature: Bumper guard - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Picchio - └ Year of manufacture: 2018 - └ Main motor power [kW]: 2.5 - └ Capacity [m³/h]: 108 - └ Connection diameter [mm]: 80 - └ Oil free: Yes - CNC options: Barcode reader, Offcut conveyor, Laser for vacuum pod positioning - Working range X [mm]: 3110 - Working range Y [mm]: 1320 Nwjdpjxtbgpsfx Abpok - Z-axis working range [mm]: 180 - Voltage [V]: 400 - Current consumption [A]: 47.2 - Fuse [A]: 63 - Power [kW]: 10.0 - Transport dimensions: 7000mm x 2400mm x 2400mm (l x w x h) - Transport weight [kg]: 3450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Nwsdpfx Abozt Twyopsk Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: used, Technical Data Workpiece Dimensions - Length: 90 - 3,000 mm - Width: 70 - 1,000 mm - Thickness: 8 - 60 mm Working Ranges X-Axis - Vertical Drilling: 0 - 3,000 mm - Horizontal Drilling (X and Y): 0 - 3,000 mm - Through Milling: 0 - 2,500 mm - Partial Milling: 0 - 3,000 mm - Through Grooving with Saw (X-direction): 0 - 2,500 mm - Partial Grooving with Saw (X-direction): 0 - 3,000 mm Y-Axis - Vertical Drilling: 0 - 1,000 mm - Vertical Drilling with 32-mm System: 32 - 1,000 mm - Horizontal Drilling in X: 0 - 1,000 mm - Horizontal Drilling in Y-direction: 90 - 1,000 mm - Milling: 0 - 950 mm - Grooving with Saw (X-direction): 112 - 1,000 mm Z-Axis - Material Thickness: 0 - 60 mm Equipment The machine is equipped with 78 independent drilling spindles, distributed across two mirror-image processing units: - 39 spindles in the upper unit - 39 spindles in the lower unit Each processing unit includes: - 29 vertical drilling spindles (19 along the X-axis and 10 along the Y-axis, 32 mm spacing) - 8 horizontal drilling spindles along the X-axis (4 with dual outlets) - 2 independent horizontal drilling spindles in the X-direction - 2 independent horizontal drilling spindles in the Y-direction - 3.5 kW HSK electro-spindle - Spindle speed: 6,000 - 18,000 rpm Optional Equipment - Roller loading table - Upper and lower work tables (pressure tables) - Upper and lower processing units - Right-hand side strip unloading conveyor - Electronic thickness control Nodszutrtepfx Abpjwk - Central automatic lubrication - PC-based CNC control (Windows XP 600 with Soft CN) - Safety system

Condition: used, Technical data - 2 tandem worktables, each with 6 pneumatic clamping devices - Travel range, X-axis: 3,550 mm - Travel range, Y-axis: 1,800 mm Njdpszutrmefx Abpjwk - Travel range, Z-axis: 750 mm - Continuously swiveling A-axis - Swivel range, C-axis: 370° - Rapid traverse speed, X-axis: 100 m/min - Rapid traverse speed, Y/Z-axis: 60 m/min - 2 + 2 tool positions with collet chucks - Tool holder standard: EN 430E / DIN 6499 - Cylindrical tool holder - Collet chuck size: ER32, tool diameter 1-20 mm - Spindle speed: 2,000-18,000 min⁻¹ - 2 electric motor spindles, each with 7.5 kW power - Operating pressure, compressed air: 6 bar - Compressed air consumption: 300 Nl/min

Condition: used, Technical Data Machining Area - X = 3200 mm - Y = 1250 mm Workpiece Dimensions - Length X: 200 - 3200 mm - Height Y: 35 - 1250 mm - Thickness Z: 8 - 60 mm - Maximum workpiece weight: 50 kg Workpiece Reference System The preliminary positioning of the workpiece in the longitudinal direction (X-axis) is performed in the loading area on the left side of the machine by means of a stop, which is placed in a fixed position in the work table. Workpiece Positioning Unit The workpiece positioning system in the X-axis is achieved by two clamping jaws that hold the workpiece during the machining process. The movement is controlled by two independently driven servomotors. Workpiece Support Surface The workpiece support surface, on which the machining units are located, consists of a series of rubber-coated rollers that form the workpiece reference in the Z-axis. On the opposite side of the machining unit, a counter-pressure system is installed, which optimally holds the workpiece in the machine. Converter and voltage connection for voltages of 380 - 415 V (+-10%), 50/60 Hz Air conditioning unit for the electrical control cabinet bSolid control system HP kit for the rapid movement of the workpiece clamping jaws The combined system, with servomotor and precision planetary gearbox, enables movement speeds of up to 110 m/min with fast acceleration ramps. Consent pedal for opening/closing the clamping jaw BH28 drilling head with individually addressable spindles - 17 vertical spindles (7 in the X-axis, 10 in the Y-axis) - 5 horizontal spindles (3 in the X-axis, 2 in the Y-axis) - 1 dado blade unit with a fixed working direction in X 11 kW electric spindle with HSK-F adapter with "C" axis torque - 11 kW, 24000 rpm in S1 operation - 6000 - 24000 rpm programmable via NC Angle saw unit HSK F63 for saw blade - Max. speed 8,400 rpm Drilling and milling unit for top and bottom edges / end drilling and milling unit - Max. speed 9,000 rpm - Tool holder with ER20 collet 8-position tool changer magazine - disc changer Nwsdpozutrasfx Abpok Accessory kit "Sensitive Surfaces" for workpiece transport Laser device for manual reading of QR codes SOPHIA - IoT Connection Dowel Ø8x40 mm and glue insertion unit Barcode2Hops with variables MultiPost upgrade POST_Element Splitter NC-Hops 7.0

Condition: used, Technical Specifications - Working range of the X-axis: 3,260 mm - Working range of the Y-axis: 1,260 mm - Working range of the Z-axis: 165 mm - Machine design: Gantry - Tool magazine capacity: 16 positions - Power of the electric spindle: 19 kW Nwodpfx Ajzutq Ajbpek - Total power consumption: 20 kW

Condition: used, Technical specifications: - X = 3,060 mm - Y = 1,320 mm - Z = 150 mm - Central automatic lubrication system - 6 ATS workpiece supports - 18 bearing consoles - Vacuum system with division into 2 working areas in the X-direction - Pneumatic system for console adjustment - 2 independent working areas in the X-direction - 4 workpiece supports - 12 clamping devices for clamping narrow workpieces - Conveyor belt for removing chips and cutting waste Nsdpfezutqvex Abpewk - Vacuum pump, 90 m³/h - 12 kW electric spindle with ISO 30 tool holder, air-cooled - The machine is additionally equipped with an integrated rotary unit that is integrated into the machine control system and functions as a 5th axis for drilling operations at different angles. - Tool changer with 10 tool positions - Manual laser barcode scanner Drilling unit BH 21L - 7 + 7 vertical drilling spindles - 6 horizontal drilling spindles (4 in the X-direction, 2 in the Y-direction) - 1 grooving unit (saw blade) in the X-direction

Condition: used, Technical specifications - Robust steel frame construction - Dust-protected linear guides - Digital servo drives on the X, Y, and Z axes - X-axis with rack and pinion drive - Y and Z axes with ball screws - Rapid traverse rate: X/Y axes: up to 50 m/min - Z-axis: up to 15 m/min - Maintenance-free servo motors with high-resolution encoders - Integrated extraction system for machining units - Additional extraction connections - Manual loading and unloading of workpieces - Pneumatic positioning stop - Work area - Workpiece length: 200-3,050 mm (with roller conveyor) - Workpiece width: 50-1,250 mm - Workpiece thickness: 8-80 mm - Electrical data - Power supply: 400 V / 50 Hz Nwjdpfjzutp Sox Abpok - Optional equipment - Air-conditioned control cabinet for operation at temperatures above 35°C - ECO-Plus energy-saving mode with automatic standby, drive shutdown, and control shutdown

Condition: used, Machining area: - in the X direction without gluing 6000 mm - in the X direction with gluing 5000 mm - in the Y direction 1200 mm - in the Y direction with main spindle + center distance 20 mm 1300 mm max. workpiece height above - top edge of suction plate Z1 100 mm - max. workpiece thickness Z2, dependent on equipment/application Work table height: approx. 950 mm 1 main spindle with pneumatic feed stroke - drive power: 12 kW in S-1 operation - tool holder: HSK F63, taper diameter = 38 mm - tool change: automatic - change force: 11000 N - tool weight: max. 6 kg - direction of rotation: clockwise/counterclockwise, programmable - speed range: continuously variable 1500 - 24000 rpm, programmable - drive: frequency-controlled three-phase motor - spindle lubrication: single grease lubrication - spindle cooling: water cooling 1 CNC axis rotating 360 degrees 1 vertical drilling unit S21 Njdpfx Aozupibebpewk Machine table consists of: - 6 support arms adjustable in the X direction, each with a rear and center stop, all stops controlled by the program - 6 sets of suction plates consisting of a total of - 6 suction plates 114 x 159 x 100 mm - 6 suction plates 125 x 75 x 100 mm - The support arms and suction plates can be individually positioned according to the corresponding workpiece size. Changeover area: - without pendulum machining, without gluing: X = 2 x 2900 mm - free space in the middle: X = 200 mm - without pendulum machining, with gluing: X = 2 x 2150 mm - free space in the middle: X = 700 mm - with pendulum machining, without gluing: X = 2 x 2400 mm - free space in the middle: X = 1200 mm - with pendulum machining, with gluing: X = 2 x 1700 mm - free space in the middle: X = 1600 mm Feed drive system Rapid traverse rates: - X-axis 100 m/min - Z-axis 25 m/min Air pressure: 6 bar Tool changer magazine with 18 positions Tool coding: position-coded Tool weight: max. 6 kg Tool length: max. 150 mm Tool diameter: max. 100 mm when fully loaded max. 150 mm with free adjacent positions or nesting Central connection for extraction Mains voltage: 3/N/PE, 400/230 V, 50 Hz 1 vacuum pump 100 m3/h

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 100 mm, number of axes: 3, overall weight: 3,350 kg, spindle motor power: 9,000 W, spindle speed (max.): 24,000 rpm, This 3-axis FELDER PROFIT H 20 CNC Wood Machining Centre was manufactured in 2011. It features a working range of 3,060 mm in the X-axis and 1,260 mm in the Y-axis, with a maximum speed of 24,000 rpm. The machine includes 14 vertical drilling spindles and 4 horizontal drilling spindles in the X-direction. If you are looking to get high-quality wood machining capabilities, consider the FELDER PROFIT H 20 machine we have for sale. Contact us for further details. • Number of Milling Spindles: 1 • Main Motor: 9 kW • Torque Support: Included • Tool Clamping System: HSK-F63 • Tool Changer Positions: 8 • Linear Changer: Included • Vertical Drilling Spindles: 14 • Horizontal Drilling Spindles X: 4 • Horizontal Drilling Spindles Y: 2 • Grooving Saw: In X-direction • Positioning Aid: Included • Crosshair Laser: Included • Vacuum Pump: Included • Number of Vacuum Pumps: 1 • Vacuum Pump Capacity: 90 m³/h • Safety Device: Safety mat (Trittmatte) • Tool Change Helper Device: Included • Workpiece Support Aids: Included Nodpfxozvca Aj Abpewk • Pendulum Machining: Included • Control Unit: TPA ALBATROS • Software: TPA ALBATROS 2 • Total Connected Load: 15 kW

Condition: ready for operation (used), Year of construction: 2010, Equipment: CE marking, SCM Cyflex 900 Year 2010 No routing unit Machine in perfect condition Direct available Nodjzka Awopfx Abpswk

Condition: used, Year of construction: 2008, total length: 26,000 mm, Colour: White Empty weight: 9.000 kg Price: On request - Details: - └ Description: Includes the input/output system - Year: 2008 - Documentation available: Yes - └ Type Documentation: Maintenance history, Parts book, Assembly manual, User manual, Electrical diagrams, Operating system, Technical data - └ Language: NL - └ Type: Hardcopy - CE marking present: Yes - CE certificate present: No - Serial number: - Number of milling spindles [pcs.]: 2 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Max. spindle speed [rpm]: 30000 - - C-axis present: Yes - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 4 - - Max. spindle speed [rpm]: 30000 - - C-axis present: Yes - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Tool changer positions [pcs.]: 36 - System/software: WoodWOP - Safety feature: Safety light curtain, Enclosed fence, Door interlock switches - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Elmo Rietschle - └ Type: 2BL2141 - └ Connection diameter [mm]: 50 Nodjzhr Rzepfx Abpswk - Tools included: Yes - CNC options: Unloading system, Offcut conveyor, Loading system, Label machine, Manual control - CNC documentation available: USB stick - Table length [mm]: 2500 - Table width [mm]: 1500 - Working range X [mm]: 5800 - Working range Y [mm]: 1600 - Z-axis working range [mm]: 535 - Voltage [V]: 400 - Current consumption [A]: 91 - Installed length [mm]: 12200 - Installed width [mm]: 9000 - Installed height [mm]: 3500 - Transport weight [kg]: 9000kg - Transport packages [pcs.]: 8 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear Nwjdpfx Abezuygqopek • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Condition: used, Year of construction: 2012, input voltage: 400 V, input frequency: 50 Hz, number of slots in tool magazine: 8, Equipment: CE marking, Biesse Klever 1836 G FT CNC machining centre Description (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Nsdpfxozqt Erj Abpewk Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2001, Equipment: CE marking, Biesse Rover ROVER 24 FT CNC machining centre Description The work surface consists of a grid table consisting of two phenol tables with a size of 1540 x 1250 mm that can be linked. The grid table has a grid of 30 mm and vacuum openings of 9 mm in a grid of 150 mm in the X and Y-richting. The grid table is equipped with 6 pneumatic zero point cams at the rear and 1 on the left and right sides. • The working range of the machine is 3100 x 1300 x 155 mm. (Z-stroke 250 mm ) • The speed on the X-axis is programmable between 0 and 100 m/min. • The speed on the Y-axis is programmable between 0 and 100 m/min. • The speed on the Z axis is programmable between 0 and 15 m/min. • The three axes are driven by brushless digital DC servo motors. CNC numerical control type NC-500 Milling motor with automatic change system with ISO30. The power of this milling motor is 10.5 hp at 24,000 rpm 10-position tool changer that moves with the unit Drilling unit with fourteen independent drill spindles Groove saw Static frequency converter Centralized pneumatic system Centralized lubrication system Vacuum pump with a capacity of 250 m3/hour Nwsdpjzqtztofx Abpsk Two push-button control panels Working pressure for air 6 kg/cm2. Voltage 380 Volt, 50 Hz. Safety mats on the front. CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Year of construction: 2020, Masterwood Project 351 L 3-Axis CNC machine Description Aircooled 3-axis milling motor 17,5HP (HSK-63F) Static frequency inverter for programming speed 1.500-24.000 t.p.m. Toolchanger with 22 positions 6 pneumatic countersinkable panel guides for loading/positioning heavy parts Prepared for install. clamps 2 horizontal clamps for beamwood 6 zero points over X-axis (positioning of panels at backside of the supports 8 zero points over X-axis (positioning of panels half-way the supports) Full reference at rightside over Y-axis Full reference at leftside over Y-Axis 2 workingfields 1 x 100m³ vacuumpump 24 vacuumcups Remote control with digital read-out Auto tool measuring system Transport waste belt Drill unit with 19 spindles (32mm center distance) 2,2kW - 7 vertical drillspindles in X-direction - 6 vertical drillspindles in Y-direction - 4 horizontal drillspindles in Y-direction - 2 horizontal drillspindles in X-direction (all drill spindles independently programmable) Control unit with PC SINCRO Software CAD/CAM MASTERWORK Technical specifiactions Njdpfx Abovu U Itjpewk Working range in X - 5.130mm Working range in Y - 1.550mm Speed in X-Y 80 mtr./min. Speed in Z 25 mtr./min. Max. workpiece thickness 200mm Milling motor power 17,5 HP (S1) RPM milling motor 1.500 - 24.000 Drill unit 3HP Toolholdersystem HSK63-F Toolchanger 22 positions Vacuumpump 100m³ Dustextraction 250mm Aircapacity 4.500m³/h Airspeed 30 mtr./sec. Compressed air 7 bar Compressed air consumption 300-500ltr./min. Fuse value 40 Amp. Weigth 7.000kg (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2011, X-Y working area: 4,422 x 1,753 mm X-Y travel: 4,955 x 1,918 mm Z-axis travel: Z = 400 mm 5-axis MORBIDELLI milling spindle C-axis rotation: 650° B-axis tilt: 290° (-10°) Power: 11 kW at 20,000 rpm, adjustable via inverter Liquid cooling HSK 63F interface Chip conveyor Automatic CNC central lubrication RAPID 24 tool changer (24 tool positions) Drill head extension with 30 + 6 spindles 8 positioning aids 2 cross lasers Vacuum pump 250 m³/h PC control with Windows Office Weight approx. 5,000 kg Storage location: Customer Nwsdpfsy D Rv Dox Abpek