Used circular saws for light metal and aluminium - half-automatic for sale (66)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 316792, total length: 2,700 mm, total width: 1,450 mm, total height: 1,900 mm, type of input current: three-phase, overall weight: 1,500 kg, Equipment: documentation/manual, Kaltenbach SKL452 NA including ESTA DUSTOMAT – Year of manufacture 2023 We are offering our Kaltenbach SKL452 NA including ESTA DUSTOMAT for sale. We purchased the machine directly from Kaltenbach as a new machine in 2023 and have since used it in the metalworking department of our WfbM (workshop for people with disabilities). The machine was used exclusively for cutting aluminum profiles. It was operated in a single-shift system with a maximum of approximately 6 hours of machine runtime per day. The machine can be inspected on-site after prior arrangement. Collection / Transport The machine is offered for sale exclusively at our location. Dismantling, loading, and transport must be organized and carried out by the buyer. Fodpez H Sgdefx Aanopp If you are interested or would like to arrange a viewing appointment, please contact us.

Condition: used, Year of construction: 1976, functionality: fully functional, Year of manufacture: 1976 Fjdpfxsz Ruhmo Aanepp Machine was modernized in 2020.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1811001, type of input current: three-phase, overall weight: 110 kg, input voltage: 400 V, Equipment: emergency stop, Abrasive cut-off saw manufactured by Vertex Machinery Works Co., Ltd. The unit was produced in 2018 in Taiwan. The machine is mounted on a dedicated, blue workshop base. Technical data: Manufacturer: Vertex Machinery Works Co., Ltd. Country of manufacture: Taiwan Year of manufacture: 2018 Serial number (S/N): 1811001 Motor power supply: 400 V / 50 Hz Number of phases: 3 PH (Three-phase) Machine weight: 110 kg Compliance mark: CE Design and equipment: The machine has a manual clamping lever and a vise for securing the workpiece. The cutting part is equipped with an abrasive disc (a close-up photo shows a Tyrolit disc). Fedpfx Asz Sutxeanepp The steel base is equipped with a lower shelf made of perforated sheet metal.

Condition: new, Year of construction: 2026, functionality: fully functional, The semi-automatic circular saw TL-600-A is an “upcut” machine and is primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (partially solid materials). Fpsdpfxe Aft Rhe Aanjp The machine is characterized by its easy operation, quick and convenient material changes, and simple miter angle adjustment. The TL-600 A has a continuously adjustable miter range to the left and right up to 20° (swivel range of two times 70°). Technical data: • Cutting range: 90° round: 230 mm / square: 200 x 200 mm / rectangular: 500 x 50 mm 45° L/R: round: 230 mm / square: 160 x 160 mm / rectangular: 250 x 100 mm • Drive power 4.1 KW / 400 V / 50 Hz • Speed 3000 RPM • Cutting speed 55 m/sec • Blade dimensions 600 x 50 mm • Working height 970 mm • Max. cutting height 230 mm • Dimensions 1300 x 1220 x 1635 mm • Weight 500 kg Equipment: • Double miter 20° – 90° – 20°, large support plate, powerful drive motor • Two-button control for initiating the sawing cut (optionally also available as a single-button control) • Clear control panel • Adjustable blade/cutting feed • Two vertical and two horizontal pneumatic clamping cylinders • Hydropneumatic lifting of the saw blade, with oil level indicator • Fixed material support can be moved to the rear to increase cutting performance • Large protective cover, covers the entire work area • Minimal lubrication system with a 2-liter reservoir • Air gun for cleaning the machine • Saw blade ø 600 mm

Condition: used, Year of construction: 2020, saw blade diameter 420 mm capacity 90 degrees: round 130 mm capacity 90 degrees: flat 160 x 100 mm capacity 45 degrees: round 110 mm capacity 45 degrees: square 130 x 80 mm turning speeds 3000 U/min engine output 2,0 kW total power requirement 2,0 kW weight of the machine ca. 190 Kg dimensions 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device Fedjygx Aijpfx Aanepp

Condition: good (used), Precise work is achieved through sawing from below. A large swivel range of up to 45° to the left and up to 0° to the right is provided. The special swivel mechanism with an integrated rotary table allows work to be performed from the front at all angle settings. A workpiece stop that can be shifted towards the rear enables optimal use of the saw blade capacity when processing wide and flat profiles. Manual saw feed. Comes standard with a saw blade and base frame. Pneumatic material clamping device (vertical). Metering spray device. Maintenance unit. Fpjdpjzdi Nmjfx Aanjp

Condition: new, Year of construction: 2025, saw blade diameter: 400 mm, – Saw blade 400 mm – Double mitre – 2 pneumatic clamps – Misting lubrication system – Blow gun – Protective cover Fpjdpogg N Drofx Aanep – Documentation – 400V

Condition: used, Cold circular saw for light metal Saw blade 350 mm ø Cold circular saw for steel, Spontan Saw blade 225 mm ø, pneumatic saw feed, length stop 1,500 mm Cold circular saw for steel, Spontan Saw blade 225 mm ø, hydraulic feed 300 mm Control unit defective Fpjdpfeyl Nt Nex Aansp

Condition: ready for operation (used), Year of construction: 2014, saw blade diameter 350 x Ø 32.0 mm capacity degrees: flat 175 x 75 mm capacity degrees: square 110 x 110 mm capacity degrees: flat 100 x 80 mm capacity degrees: square 85 x 85 mm turning speeds 3000 U/min total power requirement 1.5 kW weight of the machine ca. 180 kg dimensions of the machine ca. 870 x 710 x 1435 mm Equipment : - semi-automatic circular saw for cutting PVC and aluminum profiles - two-hand safety operation - Miter adjustment : * left * right 0 / / - Large protective hood, covers entire working area - Saw blade - 2x vertical pneumatic clamping cylinders - Adjustable blade and cutting feed - Air dust gun Work sequence 1) Setting the cutting angle 2) Inserting the material 3) Adjusting the stroke speed 4) Bring the clamping cylinder up to 20 mm of material 5) Clamp the material 6) The machine is ready for operation by pressing the start button. 7) Press and hold the two SAW buttons, the material is sawn. Fpedpfx Aeyu U Dfoanop 8) At the end of the cycle, release both SAW buttons and press the STOP button 9) Open the vice and remove or push the material forward * Special accessories included : - ALU chip extractor

Condition: new, saw blade diameter: 550 mm, compressed air connection: 7 bar, Equipment: documentation/manual, - Saw blade 550 mm Fodsrh Dkyspfx Aanjpp - Double miter cut - 4 pneumatic clamps - Hydrocheck system - Mist lubrication system - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - Air blow gun - Protective cover - Documentation - 400V

Condition: good (used), saw blade diameter: 350 mm, – Saw blade, 350 mm – Double miter cut Fpedpfxounh H Eo Aanep – Hydrocheck system – Protective cover – Mist lubrication system – 400 V

Condition: good (used), Year of construction: 2010, machine/vehicle number: 89336, Offer 25433 Technical specifications: - Saw blade diameter: 350 mm - 2 saw blade spindle speeds: approx. 40 + 80 rpm - Cutting range at 90°: - round: 110 mm - flat: 120 x 80 mm - Cutting range at 45°: - round: 80 mm - flat: 80 x 80 mm - Mitre adjustment: left up to 45°, right up to 45° Fpodpfoxx Sgkox Aanep - Manual saw blade feed - Material clamping vice - Drive: 400 V / 1.8 / 2.4 kW - Coolant system - Space requirement: approx. W 1000 x H 1500 x D 1200 mm - Weight: approx. 300 kg

Condition: new, saw blade diameter 400 mm capacity 90 degrees: round 125 mm capacity 90 degrees: flat 170 x 125 mm capacity 45 degrees: round 122 mm capacity 45 degrees: square 120 mm turning speeds 3000 U/min engine output 2,2 kW weight of the machine ca. 95 Kg Fpsdpez Ek Azofx Aanep dimensions 0,8 x 0,6 x 1,5 m Aluminum circular saw - Pneumatic workpiece clamping system - Micro-spray system

Condition: excellent (used), saw blade diameter: 400 mm, – 400 mm saw blade – Double cut / double miter – 4 pneumatic collets Fsdpewlwa Sofx Aanspp – Hydrocheck – Mist lubrication system – Blow gun – Protective hood – 400 V

Condition: good (used), Year of construction: 2009, machine/vehicle number: 87376, Offer 23330 Technical Data: - Semi-automatic sawing machine with hydropneumatic feed - Saw blade feed – vise - Saw blade diameter: 350 mm - 2 saw blade spindle speeds: approx. 40 + 80 rpm Fpedpfxsxx R Tio Aanep - Cutting capacity at 90°: round 110 mm; flat 120 x 80 mm - Cutting capacity at 45°: round 80 mm; flat 80 x 80 mm - Mitre adjustment: left up to 45°, right up to 45° - Infinitely variable saw blade feed - Pneumatic material vise - Electric foot switch - Pneumatic connection: 6 bar - Drive: 400 V / 1.4 / 1.8 kW - Coolant system - Space required: approx. W 1000 x H 1500 x D 1200 mm - Weight: approx. 300 kg

Condition: used, saw blade diameter 420 mm capacity 90 degrees: round 130 mm capacity 90 degrees: flat 160 x 100 mm capacity 45 degrees: round 110 mm capacity 45 degrees: square 130 x 80 mm turning speeds 3000 U/min engine output 2,0 kW total power requirement 2,0 kW weight of the machine ca. 190 Kg dimensions 3,0 x 1,0 x 1,3 m Fpederub S Ujpfx Aanep Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop - Machine feet

Condition: used, saw blade diameter 450 mm capacity 90 degrees: round 130 mm capacity 45 degrees: round 100 mm capacity 90 degrees: flat 210 x 170 mm capacity 45 degrees: square 145 x 170 mm turning speeds 2900 U/min total power requirement 2,3 kW weight of the machine ca. 600 Kg dimensions 4,0 x 1,5 x 1,5 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic machine - Pneumatic workpiece clamping device Fpsdjyfwxaspfx Aanop - Roller conveyor with material stop, length 3m - Feed roller conveyor, length 3m Machine color is blue!!

Condition: used, Year of construction: 1989, saw blade diameter 400 mm capacity 90 degrees: round 120 mm turning speeds 1400 / 2800 U/min engine output 4,0 kW weight of the machine ca. 180 Kg Fpedpfx Ajy D A E Dsanep dimensions 1,0 x 0,9 x 1,2 m Manuell underfloor aluminum circular saw

Condition: ready for operation (used), Year of construction: 1992, - Double mitre circular saw ADS type M Fjdpfjucuhdex Aanjpp - 2 saw heads - max. saw length 5000mm

Condition: new, - Saw blade 400 mm - Double miter - 4 pneumatic clamps - Hydrocheck system - Automatic protective cover - Mist lubrication system - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - Blow gun - Documentation - 400V Fpsdpercbb Aofx Aansp

Year of construction: 1983, condition: used, Aluminum miter saw, underfloor saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw Fedpfx Asd Ixn Rjanspp -Saw blade diameter: 355 mm -Speeds: 1420/2880 rpm -Drive: 3.7/4.5 kW -with: coolant device -Dimensions: 990/1140/H1535 mm -Weight: 596 kg

Condition: good (used), saw blade diameter: 400 mm, – Double mitering Fpedjim Ezgspfx Aanop – Mist lubrication system – Protective cap – 400V

Condition: excellent (used), functionality: fully functional, Blade inclination -45° / +45°. Maximum vise opening 180 mm Maximum non-feedable length 385 mm Fodpfx Aex Hw Sqeanjpp Disc size 350 mm Blade rotation speed 1700 / 3400 rpm - 2 speeds

Condition: new, saw blade diameter: 450 mm, Equipment: documentation/manual, – Semi-automatic – Saw blade 450 mm – Double miter Fedpfjgg N Riex Aanepp – 4 pneumatic clamps – Mist lubrication system – Roller conveyor 300 cm with length stop – Blow gun – Automatic protective cover – Documentation – 400V

Condition: new, saw blade diameter: 450 mm, – Saw blade 450 mm – Double mitre – 4 pneumatic clamps Fpodpfx Aasrcb Tzjnjp – Hydrocheck system – Automatic safety cover – Misting lubrication system – 1 roller conveyor 300 cm with length stop – Blow gun – Protective cap – Documentation – 400V