Used cut off saws for sale (40)

Condition: new, Year of construction: 2024, machine/vehicle number: MR005970, Perfect cutting 200mm high! In double miter and with a fixed zero point. When the machine is mitered, the saw blade continues to enter the material at the same point. Technical specifications: - Fixed zero point: Yes - Miter angle: 45-90-25 ° - Tiltable: Yes - Tilt angle: 60-90-30 ° - Maximum cutting length: 420 mm - Maximum cutting height: 200 mm - Maximum saw blade diameter: 520 mm Fedevzl Scspfx Am Ujgi - Weight: 310 kg - Saw blade speed: 2800 /min - Motor power: 7 hp - Serial number: 2024/95/5

Condition: used, Year of construction: 2010, Chalet construction machineused, good condition, little usedmake Krüsitype CMI 40year of manufacture 2010CE type-approvedbsi 140 mm round timber corner jointssaw 1xdrilling 1xrouting 3xworkpiece height 200 mmworkpiece width 250 mmweight approx. 2200 kgTotal connected load approx. kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in actual condition as inspected,without guarantee and warranty Fjdpfx Amovwfqqj Ujgi

Condition: good (used), Code: 0001 Fgsdpfjwl Ihgsx Am Usi Brand: DAN - LIST - DENMARK Model: MORSO Pedal-operated guillotine saw for 45° cutting of both sides of frames Technical data: Max width of the rod to be cut cm 10 Max height of the rod cm 16 Length of the right supporting table cm 80 Pair of steel blades Height of support surface from ground cm 83 Measuring system with 3 millimetre scales Overall dimensions of assembled machine mm 1750 x 550 x 950 h Overall dimensions for transport mm 650 x 550 x 950 h Weight kg 90

Condition: used, Year of construction: 1992, Cutting length 4200mm Electrical guide Fsdpfxjyf Emle Am Uegi Digital display Laser line 11kW saw motor 380V Sold as is without inspection

Condition: good (used), Year of construction: 1962, Large band saw with a 1250 mm roll diameter with central cutting device 45 kW motor Roll width 120 mm with electric blade tensioning the upper roll has been removed for transport Fgsdpjfnh T Ijfx Am Uei in very good condition, as it has been used little and was overhauled in 1997.

Condition: new, functionality: fully functional, cutting height (max.): 210 mm, overall weight: 1,100 kg, saw blade diameter: 600 mm, disc diameter: 120 mm, spindle diameter: 30 mm, cutting length (max.): 3,200 mm, type of input current: three-phase, plate length: 2,800 mm, plate width: 2,070 mm, table length: 3,200 mm, Manufacturer: DANIBRUM – Romania Sliding table length: *optional 3670 – 3800 mm, 3200 mm Sliding table width: 430 mm Cutting length: 3400 mm, 3670 – 3800 mm / optional Cutting width on the right side: 1300 mm Maximum cutting height at 90°: 210 mm Maximum cutting height at 45°: 120 mm Blade diameter (Ø): 280 – 600 mm Blade bore diameter (Ø): 30 mm Scorer bore diameter (Ø): 20 mm Main blade speeds: 4500 rpm, 5000 rpm Scorer blade speed: 8200 rpm Scorer height adjustment: yes Scorer cutting depth: 10 mm Main blade height adjustment: electric Motor power: 5 kW, 7 kW – optional Scorer motor power: 1.1 kW Extraction hood diameter (Ø): 100 mm Overall dimensions: 3600 x 3700 x 1800 mm Fgodpfjy A Nxbex Am Uei Model: PRISMA 5

Condition: good (used), - power supply - 230 V - motor power - 0,92 kW, 1,25 HP - rotational speed - 2850 rpm - blade diameter - 250 mm - disc bore diameter - 30 mm - shield for the disc - cutting height - approx. 70 mm Fedpfsr A Anqox Am Uegi - cutting width - approx. 440 mm - arm length - approx. 660 mm - arm angle adjustment +/- 90° - blade angle adjustment 0°-90° - arm height adjustment - blade adjustment in vertical axis +/- 90° NO DISCS FOR DISCS

Condition: new, Year of construction: 2025, functionality: fully functional, DANIBRUM CAS1080 Automatic Splitting and Edging Circular Saw – Speed, Precision and Safety in Cutting The DANIBRUM CAS1080 automatic splitting and edging circular saw is the ideal solution for processing timber and brass with high efficiency. This robust and precise machine ensures straight cuts at high speed, being recommended for users who want flexibility in operation and consistent high-quality results. Essential advantages: Working flexibility for edging and splitting various types of timber; High operating speed, ideal for intensive production; Precision in cutting, with straight and clean edges; Safety in operation, thanks to anti-kickback protection systems and ergonomic control panel. Main technical features: Suspended control panel: Mobile, pivoting – provides easy access from different working positions; Intuitive interface with clear controls; Continuous electronic adjustment of the feed speed. Electric height adjustment: 0.25 kW motor for adjusting the blade holder spindle; Working height between 10 – 120 mm, displayed on the front on a graduated scale. Feed and safety system: Cast iron upper pressure bar, with independent rollers for secure fixation of the material; Anti-kickback devices, which prevent accidents during operation; Fsdpfx Aswhbvcem Uogi Steel feed belt, driven by a 1.5 kW motor, with the blade centrally positioned. Cutting blade: Variable diameter Ø305 – 355 mm; Quick clamping system; Very good visibility of the blade; Manual height adjustment, by ergonomically positioned crank; Generous chamber for sawdust evacuation to the exhaust hood. Robust parallel ruler: Manual adjustment on cylindrical steel guide; Graduated scale and locking lever for precise settings. Centralized lubrication systems: Automatic electric pump for the feed chain; Dedicated device for guides and pressure rollers – ensures smooth operation and high durability. Additional functions: Positioning laser, for precise alignment of the material; Stroke limiters for correct positioning of the upper group; Free rollers in the work table, for quick turning of the material – height adjustable; Easy access to the cutting blade – quick and efficient maintenance. DANIBRUM CAS1080 is designed to increase the efficiency and safety of the cutting process in woodworking workshops, with an emphasis on continuous performance and intuitive operation. Ideal for professionals who need a reliable machine, easy to adjust and adaptable to various splitting and edging applications.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 48-2007-1403, cutting height (max.): 100 mm, saw blade diameter: 500 mm, table length: 5,000 mm, cutting depth: 320 mm, table width: 350 mm, TECHNICAL DETAILS Max. cutting depth: 320 mm Max. cutting height: 100 mm Max. saw blade diameter: 500 mm Saw blade bore: 30 mm Table length: 5,000 mm Table width: 350 mm MACHINE DETAILS Voltage: 400 V Main motor power: 5.5 kW Power: 5.5 kW Current consumption: 10.3 A Fuse rating: 16 A Dimensions & Weight Dimensions (L x W x H): 9,000 x 1,070 x 1,420 mm Weight: 1,500 kg Transport packages: 3 units Fsdpszxcm Uefx Am Usgi EQUIPMENT CE marking

Year of construction: 2001, condition: used, Multi-blade cut-off saw with 4 saws. Fgsdpfx Asiw El Usm Uji

Condition: new, Year of construction: 2026, feed rate X-axis: 30 m/min, • Wood diameter: machine-dependent, possible diameter range of 40 to 160 mm or 40 to 200 mm • Feed rate: up to 30 m/min • 3 infeed rollers for centering the log • 2 outfeed rollers • 1 saw blade • Cut-off saw motor: 7.5 kW • Feed motor: 1.5 kW Fsdpfx Aewzwifom Usgi Can also be used for hardwoods, but a higher motor output is required in that case.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 15600600437, cutting height (max.): 130 mm, cutting width (max.): 470 mm, saw blade diameter: 550 mm, empty load weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting height: 130 mm Max. cutting width at 90°: 470 mm Max. saw blade diameter: 550 mm Saw blade tiltable up to: 45° Fgsdpfjzdzmqjx Am Uei MACHINE DETAILS Main motor power: 5.5 kW Voltage: 400 V Current consumption: 12 A Fuse: 16 A Power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 1,700 x 1,600 x 1,700 mm Weight: 500 kg Transport packages: 1

Year of construction: 2004, condition: used, High-performance band saw Moehringer / Braun Canali Type multi-line TB 1250 MF-20 Fjdpfx Ajdfcv Ijm Uegi Roller diameter 1250 mm Roller width 150 mm Saw blade speed: 28-50 m/s Connected power: approx. 45 kW Feed rollers 2 x 4 Roller height 200 mm Cutting height up to the lower edge of the pressure guide: 400 mm and higher Cutting width 250 mm to the left of the saw blade and 250 mm to the right of the saw blade with center cutting device complete technical documentation Original photos will follow

Condition: new, CNC Panel Saw Wehrmann WT-38/1040 New machine For the conventional cutting of workpieces made of wood/wood-based materials with laminate (CLP, HLP), paper, foil or veneer Panel dimensions + data (finished panel): Length: from 140 mm Width: min. (finished dimension) 38+38 mm Width: max. (finished dimension) 520+520 mm (asymmetrical cutting is possible) Thickness: 8 mm - 40 mm Weight: approx. max. 30 kg Workpiece shape: rectangular Basic structure: - User-friendly combination machine with adjustable zero line - All drives and adjustments are servo-controlled - The machining motors are frequency-controlled. - Stable steel welded construction - Workpiece transport is carried out by means of a transport belt and height-adjustable top pressure. Base machine: - Sound-absorbing/protective hood with safety interlock - The required connection nozzles for an external extraction system with an air velocity of min. 28 m/sec. (underpressure 2480PA) - A compressed air connection incl. maintenance unit. - Integrated control cabinet with cooling unit for operating the machine at an ambient temperature of 10 - 45 degrees Celsius - PC control Beckhoff - Safety and protection devices according to CE guidelines - CE marking Feed rate v= 5 - 40 m/min servo-controlled drive Electronic height adjustment of 5 - 45mm adjustable via Beckhoff servo axis Stop ruler made of Teflon on the right side of the machine adjustable via Beckhoff servo axis Fgodpfozvdw Nex Am Usi Infeed ruler on the left with pneumatically sprung unit adjustable via Beckhoff servo axes Machine equipment: Unit 1: Slitting saw, frequency-controlled Milling stand with column guide and connecting plate Motor Perske 4.4 KW 50 Hz 400 Volt 4500 RPM. Tool holder D = 35 keyway External + internal thread right / left, controllable via servo drive, operating in the same direction, not swiveling with height adjustment via Beckhoff servo axis Lateral adjustment with mechanical digital display Saw blade max. 350 mm without tools Flow-optimized extraction hoods Unit 2: Saw motor, frequency-controlled Milling stand with column guide and connecting plate Saw motor not controllable, operating in the opposite direction Motor Perske 6 KW 50 Hz 400 Volt 5000 RPM. Tool holder D = 35 wedge shaft with external + internal thread right / left Saw blade max. D400 mm without tools with manually adjustable splitting wedge with height adjustment via Beckhoff servo axis Lateral adjustment with mechanical digital display Flow-optimized extraction hoods Beckhoff control technology - PC-based control system with integrated PLC and electronic path control - Virtually unlimited program memory - Operation via keyboard / mouse / touch - Reporting system for operator and error messages - MDE Basic for recording machine data, production time, set-up time, downtime, fault time, quantity and adjustable recording period - Fast data exchange between control and I/O component via EtherCat - Uninterruptible power supply for panel PC - Feed lock for adjacent machines or transport - Powerful panel PC with integrated 15.6 inch display with touch screen, integrated keypad, keyboard and mouse - USB port - Fast EtherCat interface (field bus) - Ethernet network connection RJ45 - Operating system Windows with TwinCat 3 system for real-time control

Condition: new, Thin layer from 2 mm thickness Maximum cutting accuracy up to ± 0.15 mm Minimal kerf, cutting thickness from 1.3 mm Ideal for the cutting of dried and wet wood or alternative materials Surface of the thin layer ready for gluing without need of further processing steps Friendly user electronic control Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life Optical sensor to start cutting cycle and speed change Ground table “Flexam” belt feeding for the best performance 6 rubber idler rollers adjustable in height, for opening/closing to ensure the best pneumatic pressure on the workpiece during feeding and cutting Oleo-pneumatic tensioning of the blade for better cutting performance Top and bottom ‘’Chaco’’ blade-guides which guarantee the best stability blade during cutting Internal/external lubrication of the blade to remove residues of resins and chips 4 dust extraction to optimize the suction of dust and chips Cutting height of 400 mm (500 mm optional) Cutting width up to 400 mm High quality powerful motor kW 15 (HP 20) Ethernet connection for on line service Carbide or stellite blades for best cutting performance DM of saw wheels mm 800 Max. cutting height mm 400 fixed working table mm 1290 x 800 Max. saw blade width mm 54 x 0,9 Max. & min. saw blade length mm 5530 / 5380 motor Kw 15 (HP 20) Fsdpfedcd Dlex Am Uegi suction connection nr 2x Ø 120 & 1 x Ø 100 compressed air requirement bar 6/ 27 ltd machine weight Kg 880 feed speed m/min 0 - 30 height of feeder belt mm 300 length of feeder mm 750 feeder roller DM mm 160 Max. feeder opening mm 200 Max. fence opening mm 200 feeder speed var. mt/ min 0-30