Used miter saws / chop saws for sale (129)

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, The OBS1300 bundle cutting saw has been developed to optimize production in terms of time and efficiency when formatting material to the desired length. The presented machine is available immediately—viewings are welcome. Technical specifications: • Maximum bundle dimensions (width/height): 1300 x 1300 mm • Minimum bundle dimensions (width/height): 800 x 800 mm (hydraulic clamp operating limit—smaller bundles can also be cut) • Additional equipment enables cutting bundles with a minimum length of 600 mm • Maximum cut-off bundle length: 3000 mm • Maximum feed bundle length: 6000 mm • Maximum bundle weight: 8,000 kg • Cutting accuracy: +/- 2 mm • Dedicated guide lubrication unit • GB TITANIUM cutting guide (rigid and robust, milled from a single steel block. Backward compatible with STHIL guides*) • STHIL RM404 cutting chain • 11 kW WEG guide drive motor • Fast measurement system with absolute encoder (retains position memory after power loss) and 0.2 mm positioning accuracy • Innovative strapping unit with intelligent system determining strapping point based on preset cut lengths • System of three sets of hydraulic clamps • Hydraulic system built using PONAR components • Crosswise infeed conveyor for loading bundles onto the machine • Intelligent unloading system with crosswise chain conveyor • Two pairs of tilting rollers (hydraulic) allowing large offcuts to freely fall onto the conveyor Hodpfexn Rt Uex Ab Usfr • TA DRIVE geared motors • HIWIN linear guides with increased load capacity • YHY Japan bearings • YASKAWA inverters and servomotor • 21-inch touchscreen operator panel • SIEMENS PLC controller (with remote access system) • Safety system and SICK brand sensors Warranty: 12-month warranty. Service response time: 24 hours. Spare parts and consumables warehouse. Machine supplied with: • Operating manual • Declarations of conformity • Warranty card • Electrical diagrams • Hydraulic diagrams

Condition: good (used), Year of construction: 2005, functionality: fully functional, Mitre saw with stand + extraction unit, year of manufacture approx. 2005 Hjdpfx Aexwc Icsb Usfr

Condition: used, cutting width max. 610 mm Cutting height max. 150 mm Saw blade diameter 600 mm Motor output 9,2 kW turning speeds 2750 U/min Required air-pressure 7 bar work height max. 900 +- 20 mm Dimensions (L/W/H) 770x1385x1370 mm SALVAMAC Legend 600 the semi-automatic chop saw ----- - Maximum cutting area 420x150/520x100/610x30 mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 9.2 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Hodpfovnv U Usx Ab Uefr Shock-absorbing system to minimize vibrations and ensure worker safety to improve. HM circular saw blade, diameter 600 mm, Z=132. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: ----- Saw cross section: 420x150/520x100/610x30 mm Saw blade motor power: 9.2 kW Saw blade diameter: 600 mm Saw blade type: HM Z=132 Saw blade rotation speed: 2750 rpm Air consumption per cycle: 7 Nl Intake nozzle: 2 x 140 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 ----- Total price ex works: on request! ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) - Movable front protection and more on request! ----- (technical data according to the manufacturer without guarantee!)

Condition: new, Year of construction: 2024, Under-table cross-cut saw UTK-600 also with a pneumatic vertical front protective shield Execution according to the new current PLC safety control ltd. Of the new machinery directive Technical specifications: - Motor power 7.5 kW S1 - Max. Saw blade diameter: 600 mm - Saw blade holder: 35 mm - Cutting time per stroke: 4 sec. - Speed ​​on the saw shaft: 2800 rpm - Air consumption per cycle: 20 L - Working table height: 900 mm - Extraction nozzle: 2x120 mm, 1x100 mm - Operating pressure: 7 - 8 bar - Net weight: approx. 520 kg - Necessary air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase Cutting capacity in mm: 30 x 800 Hsdpef Sqy Djfx Ab Ujfr 50 x 765 140 x 600 180 x 340 200 x 200 Standard basic equipment: - Saw blade feed pneumatic drive - * NEW two-hand safety PLC control - Automatic engine brake - Set of operating keys - Emergency stop button - Speed ​​regulator for saw blade feed - Fixed vertical protection - Upper safety pressure device (pneumatic protective hood) - suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 201, saw blade diameter: 800 mm, cutting height (max.): 300 mm, cutting width (max.): 550 mm, total length: 2,000 mm, overall weight: 1,000 kg, total width: 2,300 mm, total height: 2,000 mm, working height: 940 mm, input voltage: 400 V, saw drive: 11,000 W, saw blade bore: 40 mm, operating pressure: 8 bar, Ideal cross-cut saw for the timber trade or sawmills. Solid and robust machine, well suited for beams and laminated beams, for packaged goods but also individual pieces. Can be integrated into a cantilever rack due to its compact frame construction. Saw blade emerges from below, stably guided. Safe two-handed operation with large protective hood. Entire machine virtually maintenance-free. Pneumatic clamping cylinders right and left. Completely workshop-tested and ready for use. Saw blade included. Hfjdpoudwzcofx Ab Uer

Condition: good (used), Code: 0254 Brand: STROMAB Model: CT 800 - CE Standard Cutting centre for beams, wood carpentry, wooden roofs, sawmill, balconies, and various - CE Standard CE Standard Technical data Blade diameter mm 800 Motor power Hp 20 N° 5 axis controlled by programmer : Saw table rotation ( 0-340°) - Speed of the saw table rotation 9 sec. each 180° - Blade beveling from 90° to 45° (speed of the blade beveling 20 sec.) - Height of the blade above the table ( speed 15 sec. each 10 cm) - Beam positioning and measuring ( speed 17 mt/min) - Motorized positioning of the saw table compared to the saw fence mm 600 Photocell for the automatic reading of workpiece beginning Cutting capacity at 90° with single stroke: mm 280 x 290 / 250 x 390 / 200 x 450 Hsdpfxerzqy Ne Ab Usfr At 90° with saw table sliding and repeted cut mm 280 x 770 / 250 x 840 At 45° with single stroke mm 200 x 210 At 45° with saw table sliding and repeted cut mm 200 x 760 Maximum ripping height mm 300 Cutting precision : +/- 2 mm on 10 mt beam (straight beam ) - +/-0,2° on rotation edge of the table - +/-0,2° on inclination angle of the blade Control by industry-standard PC Touch- Screen - Windows Operating System - USB ports - Ethernet Rollers: : n° 4 idle rollers benches mt. 2 with rollers diameter 133 mm Widia blade diameter 800 mm Compressed air 6/7 bar Overall dimensions of mounted machine with roller conveyors: mm 7000 x 2600 x 2200 h Machine weight kg 2900 Total weight kg 3400 (Machine + roller benches)

Condition: like new (used), electronic adjustment of blade tilt 90° – 45° maximum cutting width: 650 mm electronic adjustment of saw height automatic material feed touch control panel laser rotating work table 0° – 345° maximum blade diameter: 800 mm motor power: 16.6 kW year of manufacture: 2016 CE marked Hsdpfexfr Etjx Ab Usfr 400 V

Condition: new, Year of construction: 2022, New machine, year of manufacture 2022 Suitable for large cutting lengths, e.g., in kitchen construction or for floorboards Compact footprint and highly versatile applications Quick conversion between double mitre cuts and cross-cutting Robust cast iron pivoting arm with replaceable hexagonal guides Movable saw unit with return spring, eightfold bearing for precise cuts Saw unit swivels 45 degrees to both sides Motor equipped with mechanical brake Aluminium stop as standard Roller conveyors, one meter long each, available as optional accessories for both sides Technical Data Dimensions and Weight: Length approx. 2110 mm Width/Depth approx. 1580 mm Height approx. 1500 mm Weight (net) approx. 300 kg Extraction port connection: Saw blade guard extraction port Ø 60 mm Electrical Data: Rated voltage 400 V, frequency 50 Hz Motor drive power 4 kW Hsdpfxew I Uq So Ab Usfr Sliding Table and Work Table: Table length 2060 mm Table width 1320 mm Noise Emission: Sound pressure level 84 dB(A) Sound power level 100 dB(A) Circular Saw Unit: Saw blade tilt -45° to 45° Pivot angle of saw arm -45° to 45° Max. cutting height 45°: 570 x 120 mm Max. cutting height -45°: 470 x 120 mm Max. cross section: 900 x 20 / 855 x 80 mm Max. cutting height 0°/45°: 120 / 83 mm Saw blade diameter: 400 mm Saw blade bore diameter: 30 mm Saw blade speed: 2800 rpm Location: Solingen Availability: Upon agreement

Condition: new, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW Speed 2.800 U/min. Required air-pressure 6-8 bar Working height 900 +/- 20 mm Dimensions (L/W/H) 10645x1000x1300 mm SALVAMAC COMBO 500 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider ----- - Pos. 1: Legend 500 under table miter saw ----- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ----- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Pos. 2: Salvastop 100 electronic length stop ----- - - Working method: 2 modes 1 x stop (length stop moves to the specified length) and 1 x slide (several lengths are processed one after the other at the push of a button) - with servo drive - Ram speed: up to 60 m/min - slider length 600 mm - with a 7'' touch display - maximum weight of logs that can be pushed - up to 100 kg - USB connection COMBO_500 - 6400/7000 Hfsdpfevu Hd Tsx Ab Usr - Roller conveyor with guide to the right of the saw. Painted steel frame with galvanized castors. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT PROTECTION Movable instead of rigid front protection. The guard rises during cutting to ensure safe working conditions. Loading and unloading wood is simplified with the downward-facing guard. The system has another special, secured pneumatic system with linear guidance, which impresses with top quality and cutting-edge technology. SOFTWARE LINK FILES Preparation for data import via a Salvamac file template in CSV format. ----- Total price demonstration machine from stock 73447 Oberkochen: on request! ----- More options like longer/shorter inlet/outlet, Stop systems on re...

Condition: excellent (used), OMEC TA185 crosscut saw Maximum cutting height 180mm Maximum cutting width 900mm Hfsdork Nxgopfx Ab Usr Saw diameter 550mm Pneumatic material clamping Pneumatic saw pass Saw control with two buttons Main motor with a power of 7.5kw 2x roller tables length 160cm each CE certificate Technical documentation

Condition: used, Year of construction: 1999, Cutting height at 90°: 135 mm Cutting length: mm Saw blade swivel and tilt: yes Vertical miter range: -60° to +60° Roller conveyor / support table: no Saw blade diameter: Speed: 2800 rpm Motor power: 2 kW Motor brake: yes Extraction connection: 100 mm Machine length: Machine width: Weight: 110 kg Hfsdoxc Hklopfx Ab Usr

Condition: as good as new (ex-display), Year of construction: 2025, Semi-automatic under-table crosscut saw, including: - 2 meter roller conveyor to the left of the saw with 1 manual folding stop and 1 pneumatic folding stop - 2 meter roller conveyor to the right of the saw General Technical Data: Maximum cutting area: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm (Z = 108) Rotational speed: 2,800 rpm Compressed air: max. 8 bar Extraction connectors: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph. Working height: 900 mm +/- 20 mm Standard equipment: Automatic protection and pressure device Two-hand operation and safety shield Carbide-tipped saw blade Hfsdpew Rcibjfx Ab Uor SAFE The ergonomically positioned two-hand control and safety guard around the saw blade ensure absolutely safe operation. Safe, protected, and reliable! ROBUST Legend saws are designed and built to work with challenging materials and hard wood even under tough conditions. The frame is made of thick-walled, fully reinforced and coated steel. Robust, compact, and durable. FAST Compared to a pull or radial arm saw, the LEGEND pneumatically guides the saw blade through the workpiece at extremely high speed. This significantly reduces the physical burden on the operator.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 014105, saw blade diameter: 250 mm, overall weight: 250 kg, rotational speed (max.): 5,000 rpm, inner diameter: 30 mm, No minimum price – guaranteed sale to the highest bidder! Loading can take place on 08/09/2025 or 09/09/2025! TECHNICAL DETAILS Rated speed: 5,000 rpm Saw blade diameter: 250 mm Fence: up to 6,300 mm Max. cutting depth: 90 mm Inner diameter: 30 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,400 x 900 x 1,600 mm Weight: 250 kg EQUIPMENT With roller conveyor assembly kit Note: The saw does not have a continuous roller conveyor; the last roller supports the profile at the end of the fence. Hsdpsw Hrzmsfx Ab Ujfr

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Large radial saw for cross-cutting and edging boards. Quick conversion between double mitre cuts or cross-cutting. Robust swivel arm made of cast iron with replaceable hex guides. Saw unit tiltable to both sides up to 45°. Cutting height at 90° max 640x20/610x60 mm Cutting height at 45° max 380 x 100 mm Cutting height at -45° max 330 x 100 mm Cutting depth with motor at 0°/45°: 100/50 mm Saw blade diameter/bore: 350/30 mm Saw blade speed: 2800 rpm Table (LxW): 1675x1060 mm Motor 3 kW/400 V Hedpjw I Utysfx Ab Uofr Weight: 220 kg Availability: short-term Storage location: Hochheim

Condition: used, saw-blade dia. 500 mm Hfodpfx Abewhf Ipj Ujr Cutting height 120 mm Motor output 5,5/7,5 kW working length 4100 mm

Condition: good (used), Year of construction: 1992, fully automatic programmable capping with additional line detection for defect capping via LUT system infeed belt 6 m Hjdpfxjl H E Tao Ab Uofr 6 ejection stations total length 12 m The infeed belt is not running at the moment, probably because of the frequency converter.

Condition: new, Year of construction: 2024, cutting hight at 90°: 200 mm cutting width: 410 mm miter square horizontal: 45° - 90° - 25° miter square vertical: 60° - 90° -30° roller convoyer/ supporting table: no saw blade diameter: 520 mm speed: 2800U/min motor power: 5 kW motor brake: yes suction connection: 100mm Hedpoiuld Ssfx Ab Uefr machine length: machine width: Gewicht: 300kg

Condition: used, Year of construction: 1999, Steel frame, cast iron arms and slides Mounting on 4 profiled rollers on ø25mm slides Blade ø350mm AL30 Cutting height 110mm Cutting capacity 680mm Engine power 3kw 3000 rpm extra-flat motor Hfsdoppmtuopfx Ab Uer Voltage 380V Engine tilt to the left from 0° to 75° Crank up and down on the front of the machine Suction outlet diameter 120mm 180cm/170cm/H160cm +- 420kg

Condition: good (used), Year of construction: 1992, I sell the automatic optimising saw GreCon Dimter 2004, year 1992. Input table automatic feeding / throughfeed system Outut table 3 pcs. kickers on left outfeed table Hfodpot Ir Nqefx Ab Uor Total length: 15,50m Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. Spare parts and Documentation included.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Motor power - 9 kW Hedpfxjxugh Ij Ab Uofr Two bump stops - One automatically lifted Powered infeed table Cutting width - approx. 70 cm Cutting height - 14 cm Infeed table length - 3 m Outfeed table length - 3 m Year of manufacture: 1998 380 V 1310 kg CE marking

Condition: used, cutting width max. 330 mm Cutting height max. 150 mm Saw blade diameter 550 mm Motor output 7,5 kW turning speeds 2800 U/min Required air-pressure 6-8 bar work height max. 900 +- 20 mm Dimensions (L/W/H) 530x869x1217 mm SALVAMAC Legend 550 the semi-automatic chop saw ----- - Maximum cutting area 220x150/330x50 mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 7.5 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to minimize vibrations and ensure worker safety to improve. HM circular saw blade, diameter 550 mm, Z=96. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: Hfsdpfx Abovnv T Re Usr ----- Saw cross section: 220x150/330x50 mm Saw blade motor power: 7.5 kW Saw blade diameter: 550 mm Saw blade type: HM Z=96 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 ----- Total price ex works: on request! ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) - Movable front protection and more on request! ----- (technical data according to the manufacturer without guarantee!)

Condition: used, Cross-cut saw BERG & SCHMIDT Junior 275 -used- Underframe, Hsdpfx Abju R S I Hj Usfr carriage ----- Technical data ----- Cutting height: 60 mm, Voltage: 230 V

Condition: used, cutting width max. 375 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW turning speeds 2800 U/min Required air-pressure 6-8 bar Dimensions (L/W/H) 530x869x1217 mm SALVAMAC Legend 500 fast semi-automatic chop saw ----- - Maximum cutting area Option A: 220x125/310x50mm Option B: 350x80/375x50mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 5.5 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to minimize vibrations and ensure worker safety to improve. HM circular saw blade, diameter 500 mm, Z=108. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: ----- Saw cross section: Option A: 220x125/310x50mm Option B: 350x80/375x50mm Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Hsdpfxovnv U Is Ab Uefr Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 ----- Total price ex works: on request! ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) - Movable front protection and more on request! ----- (technical data according to the manufacturer without guarantee!)

Condition: new, GRAULE ZS 85 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 85 N cross-cut and mitre saw - inclinable - Material feed shoulder made of laminated wood - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 85 N to ZS 170 Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Hfjdpfsu R Sycjx Ab Usr - new exhibition machine -

Condition: used, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw ----- ----- Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm. When sawing stacked boards h max. 100 mm. The structure is made entirely of thick-walled and reinforced throughout painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cutting control in ergonomic position. Engine power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balance and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different Types of processing. Durable and easily replaceable saw blade adjustment bar. Hsdpfsv Uq Tlsx Ab Uofr HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. The CE models must come with it as standard At least 1 meter long support plates/roller tables must be provided at the inlet and outlet. Technical data: ----- Saw cross section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz, 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 Machine additionally equipped with: ----- 2 m infeed table (right of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. load capacity 230 kg, Diameter 60 mm, distance 250 mm, width 320 mm. The space between the roles is enclosed in painted steel. Including lateral guidance. 2 m outfeed table (left of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. Load capacity 230 kg, diameter 60 mm, distance 250 mm, width 320 mm. The space between the rollers is of enclosed in painted steel. Includes side guide, stop guide and millimeter scale. 2 pieces of strong pneumatic stops with a width of 200 mm ----- Total price ex works: on request! ----- Image and video not original, show identical model Further options such as longer inlet/outlet, stop systems on request! (technical data according to the manufacturer without guarantee!)