Used cylindrical grinding machines 600-1099mm grinding length for sale (180)

Condition: excellent (used), KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE TYPE: 600 U YEAR OF MANUFACTURE: 2003 PARTIAL OVERHAUL: 2026 (Technical data see attached documents) Center height: 175 mm (without height adjustment) Grinding length: 600 mm Equipment: - Standard accessories - Internal grinding device for D: 80 mm max. incl. coolant supply through the workpiece spindle - Grinding wheel equipment left for D: 400 x 50 x 127 mm (standard) - Grinding wheel equipment right for D: 300 x 40 x 127 - Grinding wheel flange for wheels D: 400 x 50 x 127 mm (left) and D: 300 x 40 x 127 (right), balancing weights outside (3 pieces left, 2 pieces right) - Variable spindle drive with Danfoss frequency converter - Balancing device for dynamic balancing, type ELASO MANOBALANCE 750/EB 2000 - RENAUD internal grinding spindle type REN 828 (grease-lubricated with compressed air lock) - Various internal grinding mandrels for REN 828 – 1235, 1645, 2060, 2575 (4 pieces) - Various chucks HJNZ 28 for HJN 828 with 2 collets D: 3 mm and D: 6 mm - Tailstock standard MK 5 with adapter flange DIN 55027 size 5” Bore D: 38.2 mm (standard) - Sine bar on the tailstock - Tailstock with manual retraction for quill travel - Micrometer adjustment on the tailstock - Pneumatic relief of the tailstock - FORKARDT planetary three-jaw chuck D: 200 mm - REISHAUER wedge-bar three-jaw chuck D: 160 mm - Permanent magnet chuck D: 200 mm - Collet chuck for Schaublin B32 - Set of 59 collets Schaublin B32, D: 1.0 – 30.0 mm, graduation 0.5 mm Hjdpszhma Dsfx Abujw - Set of 8 workpiece supports incl. holder - Three-jaw steady rest, 175 mm, foldable, D: 3-120 mm - Swiveling dressing tool for dressing during external, surface or internal grinding - Side and angled dressing tool for side and angled dressing of the grinding wheels - Dial indicator stop for table swiveling with dial indicator 1/100 mm - Dial indicator stop for table longitudinal movement with dial indicator 1/100 mm - Dressing stop for internal grinding - HEIDENHAIN Digital length measuring system for the X and Z axes - STREULI paper band filter SPB 3, 90 l/min at 0.26 bar, tank volume 240 l - WALDMANN machine lamp - Set of vibration-damping pads - Three-color paint finish (light gray RAL 7035/blue RAL 5012/dark gray RAL 7016) - New acceptance test report according to KELLENBERGER standard - CE conformity - Documentation Condition: very good, machine geometrically and mechanically overhauled (see geometry report)

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, center height: 135 mm, workpiece weight (max.): 70 kg, grinding length: 600 mm, grinding wheel diameter: 405 mm, grinding diameter: 250 mm, grinding spindle motor power: 3,700 W, overall weight: 3,200 kg, pivoting range: 11 °, The machine is equipped with cycle control and is easy to operate; it can process various automatic cycles involving roughing, finishing, and spark-out, but it does not have CNC control. A grinding wheel, dressing diamond, coolant system, and balancing unit are included. Transport and commissioning are available on request. The machine can be inspected under power; it is new and has only been run for demonstrations, not for cutting operations. Hedpjxl Uc Iefx Abusw

Condition: used, Year of construction: 1990, External/Internal Cylindrical Grinding TARDUGNO RIBON type MODULE 2A Between points: 1000 mm Hjdpfx Abjz I Az Uousw Centre height: 180 mm Workpiece holder spindle CM4 Maxi grinding diameter: Ø 360 mm Workpiece holder rotation: from 35 to 310 RPM Year of construction: 1990 Tilting table - 9° / + 6° Grinding wheel dimensions: Ø 406 mm x thickness 60 mm Scale on table X Spindle speed: 1500 - 1730 RPM Grindstone motor: 5,5 CV Hydraulic tailstock CM3 Auto wheel advance Internal grinding spindle: Max speed 20000 RPM Maxi boring: from 14 to 75 mm Lubricant tank+ paper filter Diamond system Tilting grindstone holder trolley Supplied with grinding wheels + steadies Voltage: 380 V Dimensions (L x W x H): 3800 x 2000 x 2200 mm Weight: approx 3,2 T

Condition: refurbished (used), Year of construction: 2020, Machine Type: Cylindrical Grinding Machine Manufacturer: Schaudt Maschinenbau GmbH Model: PS 4 Year of Original Manufacture: 1986 Renovation/Retrofit: 2020 Control System (Post-Retrofit): Siemens CNC SINUMERIK 840D General Specifications Application: External cylindrical grinding Grinding Method: Plunge, traverse, face grinding Control Type: CNC (Siemens retrofit in 2020) Machine Weight: Approx. 3,500 – 4,500 kg Installation Area: Approx. 3.5 m x 2.0 m Workpiece Capacity Center Height: 180 mm Distance Between Centers: 1000 mm (varies by version) Max Workpiece Diameter: 360 mm Max Workpiece Weight: ~150 kg between centers Grinding Spindle Grinding Wheel Diameter: 400 mm Grinding Wheel Width: 50 mm Bore: 127 mm Peripheral Speed: Up to 45 m/s Spindle Drive Power: ~7.5 kW Spindle Speed Range: Up to 1,500 – 2,500 rpm (depending on wheel size) Headstock Type: Fixed or rotating spindle Speed Range (if motorized): ~30 – 500 rpm Taper: MK4 or similar Drive: AC Servo (post-retrofit) Tailstock Type: Manual or hydraulically actuated Quill Stroke: Approx. 50 mm Quill Diameter: ~75 mm Axes X-Axis (infeed): CNC-controlled Z-Axis (longitudinal): CNC-controlled Resolution: 0.001 mm Drive Type: Digital servo motors with ball screw Position Feedback: Absolute/Incremental linear encoders Coolant System Coolant Tank Capacity: Approx. 150 – 250 liters Coolant Pump: High-pressure, with filtration system Other Features (Post-Retrofit) Siemens HMI with touch interface Electronic handwheels (MPG) Updated safety system and enclosure New electrical cabinet with ventilation and cooling Hjdpfxow Avrzj Abusw Optional AE sensor for gap detection or touch dressing

Condition: used, Year of construction: 2001, functionality: fully functional, Control system: Siemens Sinumerik 840D Includes: Grinding media preparation, hydraulic unit, and portal loading system for loading and unloading the machine. Technical data: Center distance: 600 mm, Center height: 180 mm Maximum grinding diameter: 355 mm Maximum workpiece weight: 150 kg Maximum Z-axis speed: 11 m/min Minimum Z-axis speed: 0.01 m/min Maximum X-axis speed: 7.5 m/min Minimum X-axis speed: 0.01 m/min Hsdpfx Aszh Uvtobuew External cylindrical grinding spindle: Grinding wheel standard (outer diameter x width x inner diameter): 600 x 80 x 304.8 mm Grinding wheel peripheral speed: 5 - 50 m/s Power consumption of grinding spindle motor: 11 kW Workpiece spindle: Taper bore of workpiece spindle: MK 5 Power consumption: 2.7 kW Tailstock: Taper bore of center: MK 4 Coolant tank: 2000 liters, Lubricating oil: 30 liters, Hydraulic oil: 60 liters Operating voltage: 400 volts, 3 phases Mains frequency: 50 Hz Total machine weight: approx. 5800 kg Operating sound pressure level: 70 dB (A)

Condition: used, External/Internal Cylindrical Grinding GENDRON RU 28.100 Between points: 1000 mm Maxi grinding diameter: Ø 290 mm Tool holder rotation: from 70 to 370 RPM 4-jaws Ø 200 mm chuck Grinding wheel: Ø 300 mm Auto pass plug Hedpfxjz I A Dco Abuew Swivel table External hydraulic group External lulbricant tank Voltage: 380 V Dimensions (L x W x H): 3000 x 1900 x 2000 mm Weight: approx 3 T

Condition: used, KELLENBERGER KEL‑VISTA UR 175/1000 is a CNC cylindrical grinder, engineered for precision, high accuracy and reliability. Capacities: centre height 175 mm, distance between centres 1000 mm, max workpiece 100 kg; grinding wheel Ø400×63 mm, bore 127 mm; tailstock travel 50 mm, max table tilt 9°. Specs: wheel peripheral speed 35 m/s, spindle speeds 8–800 t/min (stepless), grinding spindle motor 5 kW, rapid feed 12 m/min, spindle taper ASA5/MK5, overall L3200×W1700×H2000 mm. Accessories: coolant system, paper filtration, set of grinding wheels. Delivers tight tolerances; ideal for automotive, aerospace, machine tools and medical sectors. Hedpfx Abjz Dvzaeusw

Condition: used, Year of construction: 2001, 2001 Kellenberger CNC Grinder KEL-VARIA RS175/1000 Hjdpfx Absywftdsuow

Condition: like new (used), Year of construction: 2016, operating hours: 31,881 h, grinding length: 3,350 mm, total width: 3,600 mm, total length: 9,400 mm, total height: 2,000 mm, grinding diameter: 595 mm, distance between centers: 3,000 mm, Year of manufacture: 2013 CNC Controller: FAGOR 8055TCO Capacity Distance between centers (mm): 3000 Height between centers (mm): 300 Height between centers from the ground (mm): 1200 Grinding diameter (mm): ø 595 Max. workpiece weight between centers (kg): 2000 Max. Workpiece weight with tool (kg): 200 Table (Z-axis) Maximum travel (mm): 3350 Rotating table plate ±5° Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Grinding carriage (X-axis) Maximum travel (mm): 500 Feed rate (mm/min): 0.01 ÷ 6000 Hodeyudtpepfx Abuow Minimum programmable increment (mm): 0.001° Resolution (mm): 0.0005° Grinding head Left grinding wheel diameter (mm): 600 Peripheral speed (m/s): 45 Workpiece head Spindle speed (rpm): 9 ÷ 250 CM taper: 5 Spindle type: 8" Tailstock Type: Manual handwheel Spindle taper (cm): 6 Maximum spindle travel (mm): 60 Quill diameter (mm): 85 Maximum taper correction (mm): ±0.1 Equipment Tailstock diamond dresser with diamond holder Diamond Grinding wheel guards according to ISO, OSHA, and UNE standard +Two-door enclosure Paper feeder and magnetic separator Grinding wheel balancing shaft MARPOSS electrodynamic balancer Grinding wheel safety sensor Touch-type axial positioner with T25 probe Grinding wheel chuck Driving dog sets Basic machine dimensions / weight Length (mm): 9400 Width (mm): 3600 Height (mm): 2000 Weight (kg): 15000 Air or water through spindle center DXF import function Spindle 2, workpiece unloader Working time hours Under power: 31881 Spindle 1: 8860 Spindle 2: 9774 Rated power kVA: 61 Basic machine dimensions / weight Length mm: 4200 Width mm: 2600 Height mm: 2586 Weight kg: 15000

Condition: good (used), functionality: fully functional, The machine is in good working condition; testing is possible upon prior arrangement. 2 UNITS. Hjdpoz A Ucasfx Abuow

Condition: ready for operation (used), Year of construction: 1999, operating hours: 38,700 h, functionality: fully functional, machine/vehicle number: 011.0389.90.065, distance between centers: 1,000 mm, grinding spindle motor power: 7,500 W, overall weight: 7,000 kg, Manufacturer: Studer Model: S40 Year of manufacture: 1999 Machine number: 011.0389.90.065 Hedpfxsz Iudhs Abuow - Control system: Fanuc 16T - Controlled C-axis - Distance between centers: 1000 [mm] - Center height: 175 [mm] - Travel (Z/X): 1050 x 275 [mm] - Max. feed rates (Z/X): 10 x 5 [m/min] - Grinding spindle type: 2 external - 2 external left grinding wheel dimensions: 500 x 80 x 203 [mm] - Grinding motor power: 7.5 [kW] - Speed: 1670 - 2110 [rpm] - Grinding spindle orientation: -15 to +225 [°] - Resolution: 1 [°] - Workpiece spindle taper: MK5 - Workpiece spindle speed: 1 - 1027 [rpm] - Workpiece spindle power: 0.785 [kW] - Tailstock: MK3 - Quill travel: 35 [mm] - Weight: 7000 [kg] - Operating hours: 38,000 hours

Condition: used, Year of construction: 2001, Cylindrical Grinding Machine Manufacturer: SHIGIYA Model: GPS-30.60 Year of manufacture: 2001 Control system: Fanuc Technical Specifications: - Center height above table: 150 mm - Max. grinding diameter: 300 mm Hodpezp Rzbefx Abuow - Center distance: 600 mm - Max. grinding length: 600 mm - Max. workpiece weight: 150 kg - Grinding wheel angle: 0° - Machine dimensions: 3,100 x 2,520 x 2,100 mm In our assessment, the machine is in good used condition and can be inspected while powered on by appointment. The machine was used for grinding eccentric shafts with a Marposs measurement control system Accessories, tools shown in the photos, and clamping devices are included in the scope of delivery only if noted in the additional information. We reserve the right to make changes and correct errors in the technical data and specifications, and to sell the item to another party in the meantime!

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 400CB1262, workpiece weight (max.): 20 kg, grinding wheel diameter: 350 mm, total width: 1,700 mm, total length: 1,800 mm, total height: 1,600 mm, type of input current: three-phase, overall weight: 2,000 kg, input frequency: 50 Hz, input voltage: 400 V, Universal cylindrical grinding machine Ziersch & Baltrusch Hsdjz Db Ewjpfx Abujw Type URS 400 Ergonomy Year of manufacture 2001

Condition: excellent (used), Year of construction: 2010, Cylindrical grinding machine Fab. Robbi Group Typ. Omicron 600 RT5 Year 2010 Technical data Make Robbi Group, IT Type OMICRON 600 RT5 Year of manufacture 2010 table Center width 600 mm Sanding length max. 600 mm Swivel range + 9° / - 5° Center height above table 160 mm Workpiece weight between centers 120 kg Workpiece weight for fly grinding 40 kg Tailstock Quill stroke 25 mm Quill diam. 43 mm Internal mounting cone CM 4 Workpiece headstock Rotation speed 0 - 600 Internal mounting cone CM 4 Spindle passage 26 mm Hedpfewhm Rfex Abusw Grinding wheel Diameter 450 mm Width min 20 / max 50 mm Bore 127 mm Equipment - Manual or automatic cycle - Automatic dressing compensation - Simplified presetting of grinding wheel and workpiece All information without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: reconditioned (used), center height: 200 mm, grinding length: 1,000 mm, center width: 1,000 mm, total width: 1,500 mm, total length: 2,800 mm, total height: 1,700 mm, grinding wheel width: 127 mm, spindle speed (max.): 1,500 rpm, External Cylindrical Grinding Machine Manufacturer: COMETA Model: SUSY Technical Data: - Center height: 200 mm - Distance between centers: 1,000 mm - Grinding length: 1,000 mm - Max. workpiece diameter: 360 mm - Grinding wheel width: 127 mm - Spindle speed: 1,500 rpm - Speed range – workpiece spindle: 15 – 320 rpm - Dimensions (L x W x H): 2.80 x 1.50 x 1.70 m Equipment & Accessories: - Machine has been overhauled - Guideways re-scraped - Spindle bearings replaced - New control cabinet Hsdpoy Ay N Dsfx Abuow In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: ready for operation (used), Cylindrical grinding machine for sale. In good working order and ready for use. The price stated in the advertisement is the net price, to which VAT must be added. Hsdpjz Hlr Tsfx Abuow This is a universal centerless (cylindrical) grinding machine for external and internal grinding. Max. grinding length: 1000 mm Max. workpiece diameter: 315–320 mm Center height: 160 mm Grinding wheel up to Ø500 mm Grinding wheel width: approx. 80–90 mm Workpiece spindle speed: 15–375 rpm Longitudinal table travel: 1250 mm Transverse travel: approx. 170 mm Machine dimensions: approx. 4500 × 2075 mm Weight: approx. 4888 kg Control: conventional. The machine can be viewed in Starachowice at ul. Kwiatkowskiego 13. Contact by phone between 7:00 a.m. and 3:00 p.m.

Condition: ready for operation (used), For sale: SHAANXI MACHINE TOOL WORKS M1432A universal cylindrical grinder, 1000 mm center distance. Hedpfx Ajz Hu Dlebujw Technical specifications: Manufacturer: Shaanxi Machine Tool Works Type/Model: M1432A Center distance: 1000 mm Max. grinding diameter: 320 mm Center height: 180 mm External and internal grinding Power supply: 380 V / 3 phases / 50 Hz Connected power: 8 kVA Protection: 35 A Machine number: 177 Weight: approx. 5300 kg Operational. Ready for use. The price listed in the advertisement is the net price, to which VAT must be added. The machine can be viewed in Starachowice at ul. Kwiatkowskiego 13. Contact by phone from 7:00 AM to 3:00 PM.

Condition: used, Year of construction: 2003, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Sehr gut erhaltene Kel-Vista Steuerung FANUC 21i Maschine erhält Wartung und Geometrie nach Kellenberger Messprotokoll. -B-Achse automatisch 2,5° -T1 Schleifscheibendurchmesser 400mm -T2 Schleifscheibendurchmesser 300mm -T3 Innenschleifeinrichtung riemengetrieben -Reitstock mit Mikroverstellung -pneumatische Entlastung Obertisch Hsdez Rkbispfx Abuew -Sinuslineal -Aktive Längspositionierung Kel-Pos -GAP Anschnitt Sensor -Messsteuerung Movomatic -Papierbandfilter

Condition: good (used), Year of construction: 1968, Cylindrical grinding machine, manufacturer: STANKOIMPORT, type: XC3, year 1968, with accessories. Model: 3A 161. Centre height: 161 mm, grinding diameter: 322 mm. Centre distance/grinding length: 1000 mm. In good condition. Hsdpfx Absxq Tlreusw

Condition: used, Colour: Blue Empty weight: 2.200 kg Price: On request - Drive system: Conventional - Distance between centres [mm]: 1000 - Centre height [mm]: 135 - Transport weight [kg]: 2200kg Financial information Hedpfxsw Sk Dve Abuew VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2010, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Control Fanuc 310is CNC control GE Fanuc 310is Hand panel for CNC control GE Fanuc Wenger loader optional Turned part with automatic indexing 1° Grinding head UR 1-2-3 Grinding wheel equipment left 500 x 80 mm Grinding wheel equipment right 400 x 63 mm Operating unit for one high-speed internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Hedpfjy U N Hiox Abusw Dressing unit on the upper table Swivelling holder for PCD diamond plates Basic module for KEL-TOUCH gate sensor and KEL-BALANCE balancing devices KEL-TOUCH lead sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece headstock for internal and external grinding Preparations for Movomatic ESZ 400 or Marposs P7 ME measuring controls Preparation for external filters Cooling lubricant switch-off for table devices Full casing emulsion Emulsion sanding mist extraction system Maintenance unit for additional pneumatic functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: C25 measuring probe Hydraulic preparation for arobo bezel

Condition: used, Year of construction: 2010, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Control Fanuc 310is Completely machanically overhauled with grinding process and setup of one part. Original photo taken on the EMO 2010. CNC control GE Fanuc 310is Hand panel for CNC control GE Fanuc Wenger loader optional Turned part with automatic indexing 1° Grinding head UR 1-2-3 Grinding wheel equipment left 500 x 80 mm Grinding wheel equipment right 400 x 63 mm Operating unit for one high-speed internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing unit on the upper table Swivelling holder for PCD diamond plates Basic module for KEL-TOUCH gate sensor and KEL-BALANCE balancing devices KEL-TOUCH lead sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece headstock for internal and external grinding Preparations for Movomatic ESZ 400 or Marposs P7 ME measuring controls Preparation for external filters Cooling lubricant switch-off for table devices Hedpfxovdk N Ej Abuew Full casing emulsion Emulsion sanding mist extraction system Maintenance unit for additional pneumatic functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: C25 measuring probe Hydraulic preparation for arobo bezel

Condition: used, Year of construction: 2020, grinding diameter 390 mm grinding length 650 mm centre height 200 mm workpiece weight max. 250 kg x-axis 380 mm z-axis 1150 mm sanding disc diameter 400 mm peripheral speed 20-50 m/sec Hsdpjx Rn Uqefx Abuew workpiece spindle stepless 1 - 650 U/min tailstock quill taper MT 4 quill stroke 45 mm dia. of quill 50 mm total power requirement 22 kW

Condition: used, Year of construction: 2008, Here are some key details: - CNC universal cylindrical grinding machine WUG 21 base machine by CNC-Technik Weiss. (The WUG 21 features a Karstens machine bed on which the CNC system is mounted.) - Year of manufacture: 2008 / operated in single-shift use only - 1000 mm between centers - Workpiece spindle headstock and tailstock MK4 - Wheel diameter up to 500 mm - Wheel mounting at a 26.5° angle - Grinding wheel drive with programmable SUG - Grinding spindle headstock manually swivellable on air cushion Hedpfxsxmurxs Abuow - Wheel positioned on the right - Internal grinding attachment mounted at the rear, including dressing device - Eckelmann control system - DIN programming - Cycle programs - Manual grinding: yes - Automatic dressing - Marposs acoustic emission monitoring for external grinding wheel, including software package - Grinding wheel spindle and workpiece spindle driven by V-belt drive

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Hedpozz S Awefx Abuow