Used finishing machines for sale (38)

Condition: ready for operation (used), Technical characteristics Capacity : 230 x 120 mm Bjdpeqxm S Sofx Aa Nsld Max. tool Ø 200 mm 5 shafts ATS control Composition : Lower planer 5.5 kW, bore 40 mm Right-hand spindle moulder 5.5 kW, 40 mm bore Left-hand spindle moulder 5.5 kW, 40 mm bore Top planer 5.5 kW, 40 mm bore Lower planer 5.5 kW, 40 mm bore Feeding speed : 5-35 m/min Infeed table length : 2000 mm Roller in table Pneumatic pressure Automatic table lubrication Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions

Condition: ready for operation (used), Technical characteristics Moulder 10 shafts Composition : Lower horizontal shaft 5,5 kW Right vertical shaft 5,5 kW Motorized left vertical shaft 7,5 kW Motorized right vertical shaft 7,5 kW Motorized upper horizontal shaft 7,5 kW Motorized lower horizontal shaft 7,5 kW Motorized upper horizontal shaft 7,5 kW Motorized lower horizontal shaft 7,5 kW Motorized left vertical shaft 7,5 kW Universal shaft 7,5 kW Capacity : 230 x 130 mm Input table 2000 mm Drive 6-36 m/min Roller in the table Short wood device Pneumatic pressure Blsdpfx Aetp Dv Iea Nsd Power and Motors Pluging: Three-phased Overall dimensions

Condition: ready for operation (used), Technical characteristics Capacity : 260 x 160 mm Feed rate : 5-30m/min Axial radial and beam adjustment by numerical control Control panel Modem connection 5 POWERLOCK shafts Lower planer 15 HP Right spindle moulder 10 HP Left spindle moulder 10 HP Upper planer 15 HP Lower planer 10 HP Power and Motors Bedpfx Aot Rrc Nea Neld Voltage: 400 V Pluging: Three-phased Power: 50 Kw Overall dimensions

Condition: ready for operation (used), Technical characteristics Composition (7 shafts) : Planer 7.5 kW Right hand spindle moulder, Left hand spindle moulder 11 kW Planer 11 kW Planer 7,5 kW Bledpfst Ruubsx Aa Ned Right hand spindle 18,5 kW (possibility to install lenght cutting blades) Left hand spindle 18,5 kW (possibility to install lenght cutting blades) Shaft diameter 40 mm Feeding speed : up to 24 m/min Working width: 230 mm Working height: 120 mm Speed of rotation of the shafts 6000 rpm Cast iron frame, cast iron table Power and Motors Voltage: 230 V Pluging: Three-phased Power: 83 Kw Overall dimensions

Condition: ready for operation (used), Technical characteristics 5 shafts moulder Capacity : 220 x 160 mm Feeding speed up to 30 m/min 2500 mm infeed table Short wood press Air-cushion table Double-bearing horizontal shafts Motorized height and width adjustment Composition : Lower planer (4 kW) Right-hand spindle moulder (4 kW) Left-hand spindle moulder (4 kW) Upper planer (5.5 kW) Universal spindle (5.5 kW) Bjdpfxertk Auo Aa Nold 50 mm bore shafts Power and Motors Voltage: 400 V Pluging: Three-phased Power: 26 Kw Overall dimensions

Condition: ready for operation (used), Technical characteristics Capacity : 230 x 120 mm 8 shafts Table 1500 mm Feed rate 6-36 m/min Composition : Horizontal lower 40 mm 7.5 kW Vertical right 40 mm 7.5 kW Vertical left 40 mm 7.5 kW Vertical right 40 mm 7.5 kW Horizontal sup 40 mm 7.5 kW Horizontal sup 40 mm 7.5 kW Horizontal lower 40 mm 7.5 kW Universal 40 mm 7.5 kW SUPERSET quick adjustment of tool diameters 2nd straight indexable spindle moulder Drive in the table + short wood Ideal for high finishing, joinery, planing and profiling of shutters, mouldings Bsdpfetyfiiox Aa Nsld Power and Motors Pluging: Three-phased Overall dimensions Lenght: 6000 mm Width: 1200 mm Weight: 5200 Kg

Condition: excellent (used), Max planing width: 230 mm Max planing height: 155 mm 2 feed speeds Electrically adjustable height/width Bottom spindle motor: 4 kW Right/left spindle motor: 7.5 kW Bodpoxz Uitsfx Aa Nsld Top spindle motor: 7.5 kW

Condition: good (used), Technical data: Planing width: up to 300 mm Planing height: up to 130 mm Number of heads: 6 bottom – 5.5 kW right – 5.5 kW left – 5.5 kW top – 5.5 kW universal 360° – 5.5 kW bottom – 7.5 kW Feed motor: 2.2 kW, stepless adjustment via inverter 4 feed rollers in the table Bodpfx Aew Sh Dmja Nsld

Condition: good (used), Technical data: Manufacturer: TSN Year of manufacture: 1988 Serial number: 2680 Bedpjw Sh Dtsfx Aa Nsld Maximum planing width: 280 mm Maximum planing height: 130 mm Spindle diameter: 40 mm Tool diameter: min. 120 mm, max. 200 mm Spindle rotation speed: up to 6000 rpm Working heads (5 units): Lower – 5.5 kW Right – 5.5 kW Left – 5.5 kW Upper – 7.5 kW Universal – 5.5 kW Feed motor: 2.2 kW, stepless speed control

Year of construction: 1998, condition: excellent (used), functionality: fully functional, We sell a complete finishing line. The line consists of: 1. intermediate grinding machine (Tecnolegno, year of construction 1998) 2. Painting chamber (GreenSprayer, 4X Wagner GA250Al sprayer, Cooling with Mitsubishi air conditioner, 2X High pressure paint pump Böllhoff 000.185-DO) 3. Drying chamber (with central heating system) Wood-aluminum window sashes were processed with this line. The line used water-based paints. Device is in good condition. Blsdpfx Aaou Hgavj Njd The price of the device is to be offered by the buyer. Buyer is responsible for transportation and dismantling. If you have any further questions, please contact us about the production equipmen

Condition: excellent (used), Year of construction: 1994, planing height: 120 mm, planing width: 190 mm, total width: 1,000 mm, total height: 1,570 mm, total length: 3,570 mm, workpiece weight (max.): 840 kg, power: 14.5 kW (19.71 HP), Good morning, We offer for sale a four-sided planer from the Italian company CASADEI model Syncro. To begin with, some useful information about the planer: * working width 190 mm * working height 120 mm * motor on vertical spindles - 5.5 kW ( one for 2 heads ). * motor on horizontal spindles - 7.5 kW ( one for 2 heads ). * total power 14,5 kW * electric adjustment of planing height * manual adjustment of planing width * 4 spindles equipped with aluminum spiral heads for replaceable plates Blodpfop H T S Usx Aa Njd * input sprocket in front of the first head * insertion table top with a length of 248 cm and a width of 19.5 cm * pump for manual lubrication of the tabletop * 2 working speeds of the machine ( 6 and 12 m/min ). * soundproofing cabin * set of pipes and extraction stubs. * original painting * overall dimensions 351 x 100 x 157 cm ( L x W x H ). * weight 840 kg * 1994 year of production The machine until the last days worked in the carpenter's shop, so it bears acceptable signs of use, nevertheless, it has undergone with us a comprehensive and rigorous inspection to eliminate any defects so you can be sure that the machine is in working order, does not require any financial contribution and is immediately ready for further work in your carpenter's shop.

Year of construction: 2025, condition: new, functionality: fully functional, Improve the quality of your finish with the DAS LDX 1000 – 6 brush sander The DAS LDX 1000 – 6 automatic machine is designed for precise sanding and finishing of profiled wood or MDF elements, offering excellent results even for the most demanding aesthetic requirements. It is ideal for smoothing, fine sanding and final preparation of surfaces, thanks to the versatile and robust configuration of the 6 working units. Standard features and technical characteristics: Multiple working units: oscillating longitudinal drums, oscillating pads, transverse drums with Ø 280 mm and width 1000 mm, equipped with 20 helically mounted brushes. Working capacity: max. width 1000 mm, workpiece thickness max. 100 mm. Efficient sanding: disc rotation speed between 50 – 300 RPM (adjustable via frequency inverter). Sanding brushes: adjustable length between 20 – 70 mm, allowing detailed work on profiles with a depth of up to 8 mm. Touchscreen control panel: Ergonomically positioned, it allows independent control of each unit. The interface is intuitive, developed by DANIBRUM engineers for fast and efficient operation. Adherent conveyor belt: Equipped with ribbed rubber for constant advance, driven by a 1.1 kW motor. Includes automatic centering roller, height adjustment sensor and brushes for dust removal at the entrance and exit. Professional sliding system: Based on recirculating ball bearings, it offers precise, reliable and low-maintenance movement. Lubrication is done manually. Oscillation for sanding units: Ensures uniform finishing and prolongs the life of abrasive belts and sisal brushes. Efficient exhaust system: Each group has dedicated exhaust ports, connected to 8 Ø 100 mm outlets, keeping the work area clean and efficient. Fast side access: Large side openings allow easy brush changes and quick access for maintenance. Toothed belt transmission: Ensures constant speeds, stable transmission and low noise level during operation. Flexibility in finishing: The "fast release" system allows for quick changes of belts and brushes. The adaptable configuration is suitable for various styles and types of finishing. The DAS LDX 1000 – 6 machine is an efficient solution for manufacturers who want superior quality in the processing of profiled wood elements, with high productivity and impeccable finishing. Maximum working width 1000 mm Maximum working height 100 mm Longitudinal drum diameter (Ø) 220 mm Longitudinal drum drive motor power - oscillating 2 x 1.5 kW Longitudinal drum oscillation motor power 0.55 kW Oscillating pad diameter 200 mm Oscillating pad drive motor power 1.5 kW Pad oscillation motor power 0.18 kW Transverse drum diameter (Ø) 280 mm Transverse drum drive motor power 2 x 2.2 kW Blsdpjwhbtzjfx Aa Nsd Advance motor power 1.1 kW Brush speed max. 1000 rpm Exhaust hood diameter (Ø) 4 x 100 mm Overall dimensions 3300 x 1600 mm Weight 1500 kg Technical support available in Romanian, English or German.

Year of construction: 2025, condition: new, functionality: fully functional, The DANIBRUM SIP series of brush sanders is a complete solution for the professional finishing of wood, MDF, milled or composite panels. Comprising the SIP610, SIP810, SIP813 and SIP1013 models, the range covers the varied requirements of processing workshops and medium and large industrial units SIP610 is an automatic brush sander, designed with state-of-the-art technology to perform finishing processes on flat and profiled surfaces with maximum precision. The equipment is ideal for rounding off sharp edges, cleaning the surface of fine dust, as well as preparing for painting or varnishing Whether used in a medium-sized workshop or in an industrial line, the SIP610 offers a constant output and a uniform quality of finish, with a minimum of manual interventions The high-quality brushes apply a controlled and adaptable pressure, which allows for the effective removal of imperfections without damaging the material Equipped with a PLC control system and a touch screen interface in Romanian, the SIP610 is easy to use, even for less experienced operators. Predefined programs allow rapid adaptation to different types of materials Thanks to SICK brand encoders and the electrical adjustment system of the working groups, extremely precise positioning can be achieved, with deviations of only 0.1 mm From solid wood to MDF or composite panels, the SIP610 can be successfully used for a variety of applications, offering consistent and superior results Blodpfxowgw Tze Aa Nod Individual electrical adjustment for each sanding group, which allows fine setting depending on the material Rotating discs with double direction of rotation and oscillation, for complete coverage of the workpiece Synchronized oscillation drums, which contribute to uniform contact with the workpiece surface Fast Release system for sanding discs The groups can be extracted laterally, making maintenance and brush changes easier Rubberized feed belt with increased grip, with milled profile for optimal traction Toothed belt transmission and oscillation reducer, which reduces vibrations and noise Linear guides with recirculating balls for smooth and precise movements Schneider electrical components and XINJE frequency converters, guaranteeing reliability and constant control Ergonomic swivel control panel, allowing intuitive operation from multiple positions LED light for increased visibility in the work area Built on a solid metal structure, the SIP610 is designed to withstand demanding industrial environments. The 4 vertical cylinders supporting each sanding group ensure evenly distributed pressure, which helps reduce wear While the SIP610 is recommended for medium-sized workshops or industrial spaces with constant production flow, the SIP810, 813 and 1013 are designed for complex requirements or large work volumes The models in the SIP range are equipped with similar digital control technologies, efficient exhaust systems and industrial-quality components The SIP610 model, with automated functions, precision control and adaptability to various types of panels, is a reliable partner in any production environment. By expanding the range with the SIP810, SIP813 and SIP1013 models, the SIP series completely covers the needs of a modern wood industry Technical support in Romanian - English - German