Condition: refurbished (used), Year of construction: 1988, Functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Dolnstmqi Ds S N Egjcg The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: excellent (used), Year of construction: 1973, grinding width: 1,600 mm, grinding length: 3,500 mm, Waldrich Coburg 15-10 S20 20 Dcslsv Th Hgen S N Egog

Condition: good (used), Functionality: fully functional, Manufacturer unknown Type: 211 – 25/26 No. 89899 Power: 220V Table length: 250 mm Table width: 260 mm Height: 135 mm Weight approx. 25 kg . Dcelnjvu D Ezo S N Egeg

Condition: good (used), Year of construction: 2017, In good technical condition and fully functional. Year of construction 2017. Manufacturer: NS MAQUINAS Grinding machine for grinding stainless steel pipes. It is intended for the preparation of pipes for polishing and chrome plating. Dceln S N Eevcm D Aegeg There is a complete manual for the grinder.

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 1019380401, grinding length: 800 mm, grinding width: 500 mm, grinding height: 425 mm, table load: 1,100 kg, grinding spindle speed: 2,380 rpm, TECHNICAL DETAILS Grinding length: 800 mm Grinding width: 500 mm Grinding height: 425 mm Table load: 1,100 kg Control system: Siemens Sinumerik X-axis – Longitudinal movement of the work table Longitudinal travel: 50 – 850 mm Table speed: 0.001 – 35 m/min Deln S N Eewaa Alogscg Y-axis – Vertical movement Distance from table to spindle center: 180 – 625 mm Vertical speed: 50 – 4,000 mm/min Z-axis – Transverse movement Transverse travel: max. 500 mm Transverse speed: 50 – 4,000 mm/min Grinding spindle Grinding spindle motor power: 11 kW Grinding spindle speed: 800 – 2,380 rpm Grinding wheel dimensions: 400 x 100 x 127 mm MACHINE DETAILS Machine dimensions: 4,200 x 2,200 x 260 mm Machine weight: 4.2 t

Condition: good (used), Functionality: fully functional, machine/vehicle number: 249, grinding length: 600 mm, grinding wheel diameter: 400 mm, Cylindrical grinding machine from Kellenberger Very good condition Center distance 600mm, center height 175mm Accessories: - Tailstock - 1x grinding wheel flange with mounted grinding wheel, 1x face grinding wheel - Digital display WITHOUT internal grinding spindle and workpiece magnet Delivered ex works, can be loaded using a forklift All warranties are excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tooling, Doln Set D Ub Us N Egecg and for compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Condition: new, The tube finishing machine ML75 is ideal to polish round, oval and elliptic tubes with diameters up to 76mm with tight bend radius. ML75 has a slim and compact planetary wheel which permits the operation of curved tubes. This machine can be equipped with an automatic feeding system for straight tubes finishing. This new tube finishing machine is the answer for curved tubes which are too tight to fit ML100 and with diameter too big to fit ML50. Polishing bent tubes with tight radii: The planetary wheel of ML75 has a compact design for tight curved tubes finishing with the highest flexibility. Straight tubes finishing: Although ML75 was designed mainly for curved tubes finishing, it can be fitted with automatic feeding systems in order to polish straight tubes whenever needed. Quick set-up: Doln S N Eed Hfg Ejgecg Simple to work with ML75 tube polishing machine. Automatic feeding is hinge mounted and easily removable for bent tube finishing. Low heat: The soft contact with abrasive belts with ML Planetary System has a very low heat on the tube surface, unlike other conventional systems. Technical Details - ML75: Working capacity (Ø mm) 10-76.2 No. Stations 1 Abrasive belt dimensions (mm) (2x) 25x860 Abrasive belt speed (m/s) 3-22 Feeding speed (m/m) 1-5 Abrasive belts motor (kW) 2.2 Wheel motor (kW) 1.5 Feeding motor (kW) (2x) 0.12 Total power (kW) 3.94 Consumption (A) 10 Dust extraction connection (Ømm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 230

Condition: refurbished (used), Year of construction: 2005, Equipment of the retrofit machine can still be freely selected. Suitable for the production of profile plates, milling tools, dental tools, circular knives and blades, styluses (also CBN) and other tools / components Control: Siemens 840 D X-axis 540 mm Y-axis 300 mm Z-axis 300 mm A-axis (dividing head) 360° C-axis (rotary table) 255° Grinding spindle: HSK50 Tool changer: 4-way Coolant system: Turbo Separator Extraction: LTA Dsln Ssilpwxo N Egscg CO2 extinguishing system Other accessories: Available from the factory Automation: Available Software: Available to customer specifications Pre-acceptance at the manufacturer's factory Commissioning, training and final acceptance at the customer's site Financing possible!

Condition: used, Functionality: fully functional, Maximum workpiece length: 500 mm Minimum workpiece length approx.: 5 mm Maximum workpiece length for plunge grinding: 50 mm Max. grinding diameter without steady rests: 100 mm Max. diameter: 240 mm Workpiece Swivel: 90° Grinding spindle slide Dcjln Sowhp D Uo N Egjg Min./max. swivel: 30° Min./max. transverse movement including 300 mm quick adjustment: 100 mm Wheel diameter after rotation 1st degree: 320 - 400 mm 2nd degree: 260 - 320 mm Max. workpiece weight between centers: 60 kg Max. workpiece weight in chuck: 20 kg Max. workpiece weight in faceplate: 20 kg 8 workpiece spindle speeds: 45 - 500 rpm Min./max. Tilt: 12° Min./max. longitudinal travel: 2 - 500 mm Infinitely variable table travel: 0.5 - 5 m/min Handwheel adjustment: 2 and 20/rev

Condition: used, Year of construction: 2002, grinding length 2000 mm Djln S N Eovy Iqfogscg grinding width 1020 mm workpiece height 725 mm workpiece weight 3300 kg table load 4,3 t surface area 2000 x 1000 mm height over floor 1000 mm max. dia. of grinding wheel 500 mm max. width of grinding wheel 100 mm taper diameter 203,2 mm required space L 7,4 x B 3,8 x H 2,8 m grinding spindle drive 26 kW 2000 1/min Y-axis drive Speed 3000 Z-axis drive Speed 3000 spindle turning speed range 50 bis 2500 U/min 0,001 mm Control Siemens weight of the machine ca. ca. 15 t ABA MULTILINE 2010 Precision surface grinding machine Serial number: 208 980 Accessories: - Abamatic 1 N.D. - Machine bed heating - Mechanical air filter system AFS1600 - Electro-permanent magnetic clamping plate 2000x800mm - Coolant with belt filter - Electric straight dressing unit

Condition: good (used), Year of construction: 1987, Twist drill grinding machine Make: SCHANBACHER Type: S 3-50 Year of manufacture: 1987 Technical data: - simple operation Dcelomnntmon S N Egeg - grinding by means of gear motor - twist drill dimensions 3 - 50 mm - point angle 90 - 140 ° - adjustable clearance angle - grinding motor 400 V / 0,25 kW - geared motor for swiveling movement 400 V / 0,12 kW - grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm - space requirement approx. W 810 x D 570 x H 1260 mm - weight approx. 120 kg - with - clamping device - presetting device

Condition: refurbished (used), Year of construction: 2025, IMMEDIATELY AVAILABLE Studer S20-2 - Mechanically Reconditioned Grinding length: 400 mm Doln S Njfg Tbrs Egocg Center height: 100 mm Table adjustment: 30° Bore diameter: 127 mm Grinding wheel dimensions: 350 x 32 mm WSS taper: MT4 (stationary and live center) RST taper: MT2 Quill stroke: 20 mm Workpiece weight: 20 kg Tailstock with manual cylinder error correction Other possible options: - Glass scale in X and Z axes - Internal grinding attachment - Grinding wheel flange - LED spotlight with flexible arm - Coolant system - Safety device

Condition: new, The tube polishing machine – ML100 – is the perfect choice for finishing the surface of round, oval and elliptical tubes. The ML planetary system enables the work without rotating the tube - delivering the best results on both bent and curved tubes. The auto feeding system transports straight tubes safety and automatically through the finishing station, enabling a consistent and high productive tube polishing quality. Minimum tube vibration even on the biggest lengths: With the ML Planetary System the tube is not spinning. The abrasive belts rotate around the tube while it is safely transported by the feeding systems. Delnod Hfnbj S N Egecg Straight or curved tubes polishing: ML100 was designed to finish either straight tubes (automatically) or bent tubes (manually). Quick set-up: Simple to work with ML100 tube polishing machine. Automatic feeding is hinge mounted and easily removable for bent tube finishing. Low heat: The soft contact with abrasive belts with ML Planetary System has a very low heat on the tube surface, unlike other conventional systems. Oval tubes: Oval or elliptical tubes polishing or simply out-of-round tubes can be safety and consistently finished with ML100 Finishing after tube drilling: Maximum adaptability of the abrasive belt to holes or graps in the material surface. Technical Details - ML100: Working capacity (Ø mm) 10 - 114 No. Stations 1 Abrasive belt dimensions (mm) (2x) 50x940 Abrasive belt speed (m/s) 3-22 Feeding speed (m/m) 1-5 Abrasive belts motor (kw) 3 Wheel motor (kw) 1.5 Feeding motor (kw) (2x) 0.12 Total power (kw) 5 Consumption (A) 11 Dust extraction connection (Ømm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 250

Year of construction: 2014, Condition: ready for operation (used), A Karstens cylindrical grinding machine from 1992, which was completely overhauled and modernized in 2014, is available. Center width: 1000mm, center height: 180mm, grinding diameter: 360mm, max. workpiece weight center/flying: 250kg/70kg, grinding wheel diameter: 400mm. Spindle holder: MK4, speed: 450rpm, swivel range: 90°, quill holder: MK4, quill stroke: 45mm, quill force: 600N. Table swivel: 10°, infeed spindle: 80mm, rapid traverse: 50mm, coarse adjustment: 280mm, weight: approx. 3800kg. Including 3x centering points and grinding wheels as good as new. Documentation available. On-site inspection is possible. Doln S Nsv Sufte Egecg

Condition: used, Functionality: fully functional, Grinding length: 973 mm Center height: 250 mm Maximum worktable tilt: +6° / -9° Centering center: MT5 Maximum grinding head travel: 100 mm Dcslswhp Dnen S N Egsg Maximum grinding head tilt: +45° / -30° Maximum grinding wheel diameter: 500 mm Speed range: 32 - 600 rpm Maximum workpiece weight between centers: 400 kg Maximum internal grinding device grindable bore: 160 mm Machine weight: approx. 5,000 kg

Condition: good (used), Year of construction: 2011, Maximum grinding diameter 290mm, maximum grinding length 800mm, grinding wheel size 290mm x 63mm bore. Control Fanuc 21i-TB, workhead speed 1,000rpm, spindle power 5Kw, table swivel +6/-3.5 degrees, Dcoln S Notudfde Egog workhead swivel angle 0-90 degrees. internal spindle motor 1.5kw. fitted with coolant.

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a External cylindrical grinding machine EMAG Weiss WPG 7 - external cylindrical grinding at the highest level and on the smallest footprint. Footprint of the WPG 7 is only 1,800 x 2,400 mm. The machine is perfect for machining small shafts or pinions. The WPG 7 can be loaded manually as well as by automated solutions (such as chain conveyors and linear gantry). CONTROL Fanuc 0i TECHNICAL DATA Djln S N Estlrkbegjcg Workpiece length: max. 250 mm grinding Ø: max. 80 mm Center height: 100 mm Center length: 380 mm Workpiece weight: max. 30kg Grinding wheel Ø: max. 500x 80 mm Price, delivery time and equipment of the machine according to agreement.

Condition: used, Year of construction: 1965, grinding length 400 mm grinding width 250 mm workpiece height 300 mm Doln S N Esvzh N Djgecg total power requirement ? kW weight of the machine ca. 2 t dimensions of the machine ca. 2*2*2 m

Condition: refurbished (used), Year of construction: 1988, Functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. Dcoln S Njpugwis Egeg The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: new, ROGI surface grinder 400V-3F including: Dceln S Nek Iubvj Egog Magnetic plate 2-axis digital readout system Grinding wheel flange Grinding wheel Balancing device Cooling system LED work light Toolbox

Condition: ready for operation (used), Year of construction: 2007, This Kundig Premium-2 1100-RE belt sander was manufactured in 2007. Ideal for woodworking, it features a robust design for consistent performance. Consider the opportunity to buy this Kundig Premium-2 1100-RE belt sander. Contact us for more information. Application Types Dcjlnswb Imnj S N Egsg Sanding

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a conventional universal cylindrical grinding machine EMAG Weiss Eco 200. The super compact machine is targeted to users who do not require a CNC control unit, but still set the highest requirements for machining quality. The machine is easy to operate and access, which allows for fast machine tooling. TECHNICAL DATA Workpiece diameter: max. 200 mm Dslnjtmqcwj S N Egecg Workpiece lenght: max. 400 mm Center height: 100 mm Workpiece weight: 30 kg Workpiece headstock - socket: MK4 Tailstock - socket: MK3 Grinding wheel diameter: max. max. 350 mm Price, delivery time and equipment of the machine according to agreement.

Condition: new, WBG75 - ROGI belt sander 400V - 3 Phase Sanding belt ----- 75 x 2000 mm Belt speed ----- 33 mtr/s Motor ----- 3 KW Weight ----- 115 KG INCLUDED Dcelega T Ayjn S N Egjg * Robust undercarriage * Sanding belt

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a CNC controled universal cylindrical grinding machine EMAG Weiss W 11 CNC. The machine is suitable for external-interna- face and cylindrical grinding. The W 11 CNC cylindrical grinding machine is perfect for one-offs- / prototype- and serial production. This cylindrical grinding machine is also used for sample production in the field of training and maintenance. CONTROL Eckelmann TECHNICAL DATA Workpiece length: max. 1.500 mm Center height: 200 mm | Option 320 mm Dceln Ser Ey Hue N Egsg Workpiece weight: 250 kg Workhead: MK 4 | Option MK5 / MK6 Tailstock: MK 4 TOOL CARRIER Single wheel straight / incliend, but also possible 2 wheels on B-axis combined with internal grinding spindle. Price, delivery time and equipment of the machine according to agreement.

Condition: new, Grinding of drills with a diameter of 2 mm to 13 mm Adjustable angle ----- 90 and 135 Grinding speed ----- 5300 o/min Dceln S Noga T D To Egsg Grinding stone ----- CBN 200 Motor ----- 230V/1F/180W Weight ----- 10 kg