Used hydraulic presses double column / Four column presses for sale (310)

Condition: repair required (used), Year of construction: 1972, functionality: limited functionality, machine/vehicle number: 611, pressing force: 100 t, For sale is a Hans Schön hydraulic press with 100 ton capacity. It was last used approximately 7 years ago. At that time, the machine had an issue with a hydraulic valve, which was not repaired since the press was no longer needed. Otherwise, the machine ran flawlessly until then. The press does not have UVV (accident prevention certification)! Ltjdpfxex Ehlcj Ah Uea

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 50 /92-NG 600/15 kW/32Liter, pressing force: 130 t, operating speed: 80 mm/s, overall weight: 3,500 kg, Hydraulic straightening press Manufacturer: G +K Ljdpoxr Rnajfx Ah Uota Year of manufacture: 1992 Max. pressing force: 130 t Lower table size: 800 x 500 mm with T-slots Upper table size: 800 x 500 mm with T-slots Installation dimension: 1000 mm System pressure: 250 bar Electric motor: 15 kW Weight: 3400 kg Operating voltage: 380 V AC, 24 V DC

Condition: used, Year of construction: 1977, pressure 250 t distance between columns 930 mm stroke 200 mm Distance table/ram, stroke up 600 mm table surface area 900 x 860 mm die cushion capacity 100 t Ltodpfx Ahovuk Trj Uea die cushion stroke 50 mm die cushion area 350 x 400 mm table height over floor 950 mm side window 380 x 380 mm ram surface 850 x 700 mm feed down 400 mm/s feed up 400 mm/s working feed 30 mm/s oil volume 350 l power capacity 45,0 kW weight 11,5 t Dimensions (WxDxH) 2,0 x 1,2 x 3,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oilhydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, mechanical depth stop with hydraulic cutting impact cushioning no foundation pit necessary as is where is, WITHOUT putting into operation / WITHOUT additional work

Condition: like new (used), Year of construction: 2024, pressing force: 200 t, Main Cylinder Press Capacity: 200 t - Max. working pressure: 285 bar - Cylinder stroke: 1500 mm - Clear width/clear height: 1500 mm - Distance between columns: 2050 mm - Max. lateral cylinder displacement: 1450 mm - Max. longitudinal frame displacement: 2800 mm - Table plate dimensions: 4000 x 2000 mm - Hydraulic power unit output: 5.5 kW - Approach speed: 20 mm/s - Working speed: 2 mm/s - Hydraulic oil not included in delivery - Hydraulic power units are mounted on top of the press - Hydraulic block and valves by Rexroth - Air filter brand: FILTREC - Oil filter brand: FILTREC - Air and water (cooler) cooling for hydraulics - Stroke cylinder integrated into the working table Rod Diameter: 25 mm - Stroke: 80 mm - Control via cylinder control or hydraulic unit (lever control) - 10 lift cylinders installed - Digital control with position measurement via encoder and pressure measurement with data output - Siemens touchscreen display KTP 900 – 9" for programming (up to 99 programs): - Maximum up and down travel of the cylinder - Pressure holding time at the lower table - Decompression time - Working pressure adjustment - Piece counter - Pre-stop traverse with 0.1 mm accuracy - Alarm management - Frame-mounted display for real-time process parameters - Wireless remote control with two buttons for simultaneous operation - Control cabinet with Siemens CPU - Hydraulic unit with solenoid valves (replaces suspended control panel) - Air/oil heat exchanger with decompression valve 5. ELECTRICAL INSTALLATION AND SAFETY - The PLC system is by SIEMENS (S7-1200 series) - Siemens touchscreen LCD (9 inch) MTP900 installed in the control cabinet - Electrical devices from brands SIEMENS, ALLEN BRADLEY, and PHOENIX - System pressure of the pressure cylinder is set via LCD touchscreen - Modes (semi-automatic and automatic), power, vertical stroke, and dwell time of the upper cylinder are programmable - 99 recipes can be saved, with all parameters programmable for each recipe - Activation via wireless control - Features dual push-buttons for slow/fast cylinder travel, emergency stop button, and operation confirmation - Touch-sensitive safety edge at the bottom of the portal columns for safety Ltjdpfx Ahexrb Nbj Uja - Control cabinet mounted on the bridge side wall - Anti-twist lock for the cylinder - Oil temperature displayed on LCD touchscreen - Overheating warning for hydraulic oil shown on LCD touchscreen - Filter contamination status displayed on LCD touchscreen - System errors displayed on LCD touchscreen - Press status information displayed on LCD touchscreen - Once oil temperature reaches 45°C, the air cooler starts to lower the oil temperature; machine operation stops above 65°C until it cools to operating temperature - Operating manual included - System meets all essential safety and health requirements as per CE regulations

Year of construction: 1990, condition: like new (used), Used Schuler hydraulic press for sale Ltjdpfjhcnxrsx Ah Uea Brand : Schuler Schuler EB 2-500- 2.75-0.85 H-frame hydraulic press Power ( ton ) : 500 tons Table dimensions ( x-y/mm) : 3000×1800 Slide dimensions ( x-y/mm) : 3000×1800 Stroke ( x/mm) : 850 Stroke per minute from 12 to 24 Control Siemens S7 New hydraulic presses for sale

Condition: ready for operation (used), passage width: 1,500 mm, power: 22 kW (29.91 HP), empty load weight: 16,000 kg, load capacity: 320,000 kg, Hydro 320 ton Max ram adjustment: 800 mm Lodpfsxuk Ursx Ah Ujta Distance between table -- ram: 1170 mm Table area: 1500 x 1200 mm Max counter-pression in table: 80 ton

Condition: used, Year of construction: 2020, functionality: fully functional, We are offering this used STENHOJ LP 60 hydraulic press, year of manufacture 2020. Ljdpfx Ahjx Ivgio Uota Manufacturer: STENHOJ Model: LP 60 Year of manufacture: 2020 Condition: used Machine type: Hydraulic press If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 1987, pressure 65 t distance between columns 930 mm stroke 1100 mm distance table/ram, stroke up 1300 mm table surface area 1340x1084 mm hole in the table 604 x 404 mm table height over floor 1000 mm side window 705 mm ram surface 1230 x 990 mm speed down 620 mm/s speed up 207 mm/s working speed 320 mm/s oil volume 450 l power requirement 15,5 kW weight 8,0 t dimensions (WxDxH) 2,8 x 2,6 x 4,85 m hydraulic fast-stroke trimming press for die-cast parts with oilhydraulic drive, hydraulic shifting devices (4x), hydraulic blank holder in BDC / ejector in TDC in ram, ram interlocking device table surface 1340 x 705 mm or 930 x 1084 mm ram surface 1230 x 705 mm or 930 x 990 mm Insert plate in table with opening 320 x 260 mm Ljdpfovuk Szox Ah Ujta as is where is, WITHOUT putting into operation / WITHOUT additional work

Year of construction: 1985, condition: used, Used HUGH SMITH 1000 Ton Hydraulic 4 Post Downstroking Press for sale Operating Speeds 50 mm/sec. Gravity approach. 6 mm/sec. Pressing. 50 mm/sec. Return. Working Height 1060 mm. Press Weight 102 tons total. Ltedpfxof A R Uzs Ah Uja Towler Hydraulics. Machine originally upstroke (see original drawing attached) but converted to downstroke and refurbished in 1985 (see updated drawing attached) with new electrics. Brand new c, h and d frame hydraulic presses for sale – can quote at competitive prices and built to your specification. New 1000ton hydraulic presses available for sale upon request

Condition: used, Year of construction: 1998, Pressure 63 t distance between columns 1000 mm stroke 300 mm Distance table/ram, max. stroke up, adjustment up 850 mm table surface area 980 x 500 mm table height above floor 850 mm Ltjdevzxrvspfx Ah Uoa ram surface 130 mm speed down 400 mm/s speed up 461 mm/s working speed 14 - 97 mm/s power requirement 15,0 kW Weight 5,0 t Dimensions (WxDxH) 2,0 x 1,6 x 3,9 m with oil-hydraulic drive, controllable dependent on pressure, mechanical depth stop No foundation pit necessary as is where is, WITHOUT putting into operation

Year of construction: 2012, condition: used, Hounsell down stroke Hydraulic forming press Ltjdpfx Ahjf A R Uhs Uea H frame Year 2012 200ton Daylight 750mm Nominal Table size W x L 2100mm x 1200mm Max Weight top tool 800kg Max system Pressure 340 bar Ram diameters 110mm Number of Rams 6 Seal Dimensions 110 x 130 x 16 Machine construction fabricated frame Machine weight 95000 kg approx Approach speed 150mm/s Pressing speed 8mm/s Return speed 80-90mm/s Can quote for new hydraulic presses c and h frame

Condition: used, Year of construction: 1979, pressure 18 t diameter 250 mm stroke 150 mm Ljdpevzxp Isfx Ah Ueta distance between columns 210 mm max. distance table - ram 400 mm power capacity 5,5 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 1,0 x 1,0 x 1,8 m hydraulic die-hob press with oil-hydraulic drive, controllable dependent on pressure/time as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Year of construction: 2008, condition: excellent (used), SMG HZPU 8000-3000/2100-S1 Hydraulic Drawing Press Brand SMG Type HZPU 8000-3000/2100-S1 Year 1995 Ltodjn Awd Ropfx Ah Usa Description Hydraulic Drawing Press H frame hydraulic press Pressing force 800 ton Clamping area Approx. 3,000 x 2,100 mm Installation height Max. 1,400 mm

Condition: used, Year of construction: 1991, pressure 150 t distance between columns 300 mm stroke 180 mm distance table/ram, max. stroke up, adjustment up 300 mm table surface area 570x180 / 300x410 mm Ltsdpfxovuuiwj Ah Usa table height over floor 875 mm side window 180 mm ram surface 180 mm speed down 250 mm/s speed up 160 mm/s working speed 6 - 12 mm/s oil volume 250 l power requirement 11,0 kW weight 2,4 t dimensions (WxDxH) 1,3 x 1,3 x 2,4 m year of manufacture 1972 - overhaul 1991 permitted for manual loading according to the German Safety Regulations (UVV §20) with oil-hydraulic drive No foundation pit necessary as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: good (used), Year of construction: 1994, functionality: fully functional, total length: 2,700 mm, pressing force: 1,000 t, table width: 1,500 mm, distance table to ram: 1,750 mm, Used 1000ton hydraulic press for sale 1000TON PRESS SIDE FRAME Max TYPE CAPACITY 1000ton PRESSURE 175kgf.cm2 STROKE 1000mm Ledpfjucdgpjx Ah Uota DAYLIGHT 1750mm BOLSTER AREA 2700mm x 1500mm PULL BACK CAPACITY 52.7ton DIE CUSHION CAPACITY 50ton DIE CUSHION STROKE 180mm MAIN MOTOR 415v 50hz 6p 110kw OIL TANK CAPACITY 1800L

Condition: used, Year of construction: 2011, pressure 120 t distance between columns 430 mm stroke 125 mm distance table/ram, stroke up 400 mm table surface area 430 x 450 mm Ltjdpfx Ajvuuhtsh Uja table height over floor 860 mm side window 230 mm ram surface 250 mm working speed 10 mm/s power requirement 11,0 kW weight 2,5 t dimensions (WxDxH) 1,6 x 1,3 x 2,4 m permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, moving screen, two-hand and foot operation No foundation pit necessary can be inspected in running condition in our warehouse

Year of construction: 1992, condition: excellent (used), Used 700ton H-frame hydraulic press for sale Make: Muller Capacity (ton) : 700 Number of pistons : 2 Table dimensions ( x-y/mm) : 4000×2200 Ltodjhcfzkepfx Ah Uoa Slide dimensions ( x-y/mm) : 4000×2200 Stroke ( mm) : 1400 Light at tdc ( mm) : 1920 Cushion power ( ton ) : 400 Cushion stroke (mm) : 500

Condition: used, Year of construction: 1982, pressure 200 t distance between columns 2030 mm stroke 550 mm Distance table/ram, stroke up 1800 mm table surface area 2000 x 2800 mm Ltsdpevuk Hlofx Ah Uoa table height over floor 760 mm ram surface 2000 x 2000 mm Side window 2000 mm feed down 400 mm/s power requirement 51,0 kW weight 33,0 t dimensions (WxDxH) 3,25 x 3,5 x 5,4 m Height above floor 5,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oilhydraulic drive, controllable dependant on pressure and way, ram interlocking no foundation pit necessary as is where is, WITHOUT putting into operation / WITHOUT additional work

Year of construction: 2005, condition: like new (used), Used Kojima 2200ton hydraulic H frame press for sale Machine Type Hydraulic Press Make Kojima Capacity 2200 tons Stroke 1200 mm Daylight 1800 mm Slide 3200 x 1800 mm Ltsdpfx Ajlqxg Hsh Usa Moving Bolster 3200 x 1900 mm Moving Bolster Stroke 2500 mm Moving Bolster Speed 100 mm/sec Die Cushion 100 – 500 ton Cushion Stroke 450 mm Cushion Pad 2000 x 1275 mm Cushion Pin 50 mm dia Slide descending speed 235 mm/sec Hydraulic Tank 3200 litre

Condition: used, Year of construction: 1990, pressure 500 t distance between columns 1220 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1600 x 1200 mm pressure of drawing cushion in table 320 t stroke of drawing cushion in table 150 mm drawing cushion surface in table 750 x 625 mm pressure of drawing cushion in ram 180 t stroke of drawing cushion in ram 100 mm drawing cushion area in ram 750 x 625 mm ram surface 1600 x 1200 mm table height over floor 800 mm speed down 665 mm/s speed up 530 mm/s working speed 34 - 100 mm/s quantity of oil 2000 l Lsdpfx Ahevut Tbo Usta power requirement 180,0 kW weight 40,0 t Dimensions (WxDxH) 3,2 x 2,4 x 7,5 m Depth of foundation pit 4,1 m Height above floor 5,55 m YOM 1975 - Overhaul 1990 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table and ram depth of the foundation pit approx. 4,1 m as is where is, WITHOUT putting into operation

Condition: excellent (used), Year of construction: 1991, pressing force: 250 t, operating speed: 240 mm/s, Used Rhodes Hydraulic 250ton Hydraulic Press for sale 250 / HDS New PLC in March 2023 - BEIJER ELECTRONICS PRESSURE 250 TONNES MAX. STROKE - VARIABLE 30 мм TO 500 мм SLIDE SPEEDS - APPROACH 240 MM/SEC Ltedovt Agnspfx Ah Usa PRESSING - 22 MM/SEC. RETURN - 230 MM/SEC 2 DIE CUSHIONS - FORCE 35 TONNES / CUSHION STROKE - 200 M MAX. SERIAL NUMBER YEAR OF MANUFACTURE 1991 250 TONNES MAX. 35 TONNES / CUSHION

Condition: used, Year of construction: 1997, Pressure 500 t distance between columns 1550 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1200 x 1300 mm pressure of drawing cushion in table 250 t stroke of drawing cushion in table 150 mm die cushion area 950 x 950 mm table height over floor 1245 mm side window 1250 mm ram surface 1200 x 1300 mm speed down 750 mm/s Ltjdpfxjvuk T Eo Ah Uoa speed up 780 mm/s working speed 105 mm/s oil volume 4000 l power requirement 263,0 kW weight 45,0 t Dimensions (WxDxH) 3,3 x 3,3 x 6,1 m height over floor 6,1 m YOM 1978 - overhaul 1997 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, pneumatic ejector in ram (0,5 t), cutting impact cushioning with depth stop (motoric adjustable), mechanical ram interlocking in TDC as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1998, pressure 3500 t stroke 900 mm Distance table / ram, stroke down 1000 mm distance table / ram, stroke up 1900 mm table surface area 3150 x 2150 mm ram surface 3150 x 2150 mm Total Weight of Tool max. 30,0 t Weight of Tool Top Part max. 20,0 t speed down 400 mm/s working speed 0,9 - 9,2 mm/s Hydraulic Operating Pressure 280 bar oil volume 5500 l rated current 760 A voltage 400 V frequency 50 Hz power requirement 425 kW weight 231,0 t Hydroformpress / IHU-Press maximum preforming force approx. 1000 t Total tool weight approx. 30 t upper tool weight approx. 20 t · Die function interface: 4 controlled axis, 3 b/w functions slide, 4 b/w functions bed · Parallelism control: over the length side of the press · Light curtain: front and back side · Light barrier: left and right side · Slide locking: TDC-Position · Two-hand control panel: 1 · Independent high pressure circles water hydraulic system: 2 · Max. working pressure: 3.000 bar · Displaced volume of each Intensifier: 3,74l Ltedpfx Aovuukhjh Usa · 2 Filling pumps: volume and pressure depending the power grid · Location of pressure intensifier: to be determined · Main pumps: located on the press crown/oil tank · One die change table: 6,7 x 2,15 m · Max. die size: 3,15 x 2,15 m · Clamps on slide: Hydraulic · Clamps on the bed: Mechanical · Electrical control: Schuler Multiview HF Attention: This machine is a EU re-import! If the machine is to be installed and operated in the EU, it must be adapted to the currently valid EU directives of the country of installation before it is put into operation This work is not part of the offered price as is where is, WITHOUT putting into operation, stored in dismantled condition

Condition: used, Year of construction: 1978, pressure 800 t distance between columns 3010 mm stroke 300 mm distance table/ram, max. stroke up, adjustment up 1350 mm table surface area 3000 x 1800 mm table height over floor 500 mm side window 1500 x 1400 mm ram surface 3000 x 1800 mm speed down 300 mm/s oil volume 900 l height over floor 5,4 m height beneath floor 2,1 m power requirement 200,0 kW Ljdpovuk Ipsfx Ah Ujta weight 80,0 t Dimensions (WxDxH) 5,2 x 2,6 x 7,5 m hydraulic high-speed press with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop (motoric adjustable), ram interlocking in upper position maximum stroke frequency 50/min (when using automatic feeding devices) as is where is, WITHOUT putting into operation, stored in dismantled condition

Condition: used, Year of construction: 1996, pressure 100 t distance between columns 1525 mm stroke 450 mm distance table/ram, max. stroke up, adjustment up 850 mm table surface area 1500 x 1150 mm pressure of drawing cushion in table 30 t stroke of drawing cushion in table 150 mm table height over floor 940 mm side window 480 mm ram surface 1500 x 1150 mm oil volume 1200 l weight 25,0 t dimensions (WxDxH) 4,2 x 1,75 x 5,1 m light guard Sick permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, hydraulic drawing cushion / ejector in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, mechanical depth stop No foundation pit necessary 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available Ltedpevuufxefx Ah Uoa