Condition: refurbished (used), Krauss Maffei injection molding machine Cgob Hawbordg Tpj Aot 25 tons Year: 2000 IPC not working (see map)

Condition: excellent (used), Year of construction: 2009, SUMITOMO SE350HD-C1600 (2009) Clamping force: 350 t Screw diameter: 63 mm Shot weight: 853 g Distance between tie bars V: 710 mm Distance between tie bars H: 760 mm Plate dimensions: 1070x1020 mm Shot volume: 888 cm3 Csb Hawbjvygmlo Ajgt Type: Horizontal Drive: Electric Only 40.000 hours 2 core pullers

Condition: excellent (used), Haitian Type: Mars3 5300WM/2400-720 Overall dimensions: WxHxD mm (8700 x 2800 x 2500) Screw diameter 2400: 70 mm 720: 45 mm Injection volume 2400: 1239 cm³ 720: 334 cm³ Injection capacity 2400: 1127 g  720:  304 g Injection rate 2400: 300 g/s 720: 142 g/s Injection pressure 2400: 198 MPa 720: 222 MPa Screw speed 2400: 0-184 r/min 720: 0-180 r/min Diameter of turntable : 1250 mm Max load on turntable: 3.3 t Power connection: AC 400V 3P/N/PE 50 Hz 25 kA 227 A Injection unit: Single and double cylinder control 3 modes for injection retraction Closing unit: Closing force 5300 kN Connection for Euro 18 robot Cgsb Hawbjvvlv Ro Ast Safety door Condition: used Scope of delivery: (See picture) Sale from location! Weight: approx. 31000 kg (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2001, Condition: excellent (used), Year of manufacture 2001 Closing force 50 ton Cgjb Hawbsf Tiq Se Aot Screw diameter 25 mm Injection pressure 2000 bar Shot weight. 54 gr Core pulls 4

Year of construction: 2006, Condition: ready for operation (used), Injection Unit Screw diameter 55 mm Clamping Unit Opening stroke 700 mm Distance between bars 560 x 560 mm Additional Equipment Core Valve: 1 Air Valves: 3 EU 12 for Robot Connection: Yes Cgsb Houpm S Neawb Ast This Krauss Maffei 200-1000 C2 was manufactured in 2006. A hydraulic injection moulding machine featuring a tie bar distance of 560 x 560 mm and an opening stroke of 700 mm. It includes a screw diameter of 55 mm and is equipped with 1 core valve, 3 air valves, and an EU 12 connector for robot integration. A solid choice for expanding production capabilities. For more information about this hydraulic injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2000, Vertical injection molding machine Clamping force: 250 kN Plate size 342 x 250 mm Screw diameter 20 mm Csb Hawov Eqgyjb Aogt

Condition: excellent (used), Year of construction: 2007, Engel VC 200/40 TECH injection molding machine Year of production - 2007 Control - CC 200 Closing unit: Closing force [kN] - 400 Clamping plate dimensions (hxv) [mm] -550 x 430 Min./max. mold height [mm] min -180 Maximum opening width [mm]- 530 Injection unit Screw diameter [mm] -30 Injection volume [cm3]- 99 Injection pressure [bar]- 1451 Electric-hydraulic equipment Pump motor rated power [kW] 15 Dimensions and weight: Net weight with control cabinet [t]- 2.7 Ceb Haswa S Uajwb Aogt Dimensions (length x width x height) [m] -3.26m x 1.2m x 1.8m

Year of construction: 2015, Condition: excellent (used), Windsor Plug X Press Technologies Year :2015 Serial nr.: 019 Cgeb Hsuzhchjawb Ast Oil tank capacity: 400L the part no of the screw is 03424130. Ø = 55 mm, total length = 1610 mm SS PxP-881 D55 20D 4,5D a

Condition: good (used), Year of construction: 2016, clamping force: 800 kN, Very good condition - CC300 control - Maintained exellent from big danish manufacturer. Cgeb Hawjvib N Tob Aot

Condition: excellent (used), Year of construction: 2000, operating hours: 29,600 h, Functionality: fully functional, clamping force: 300 kN, screw diameter: 28 mm, overall weight: 1,250 kg, BOY 30A Year: 2000 Screw ø: 28 mm Ceb Hawbov Rb Dts Asgt Hours: 29,600 h

Year of construction: 2006, Condition: ready for operation (used), General Data Measurements width 2650 mm Measurements depth 9360 mm Measurements height 2430 mm Machine weight 43400Kg Injection Unit Screw diameter 80 mm Clamping Unit Opening stroke 1150 mm Distance between bars 1000 x 930 mm Additional Equipment Core Valve: 1 Ceb Houpm Uqjawb Aogt Air Valves: 3 EU 12 for Robot Connection: Yes Attached you will find some drawings with fundament and platens. This Krauss Maffei 600 - 3500 C3 hydraulic injection moulding machine was manufactured in 2006. It features a tie bar distance of 1000 x 930 mm and an opening stroke of 1150 mm. Equipped with 1 core valve, 3 air valves, and a screw diameter of 80 mm, it also includes an EU 12 connection for robot integration. For more information about this hydraulic injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: repair required (used), Functionality: not functional, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, For sale is an injection molding machine from the Arburg brand and the type 470 C 1600-800 The pump and a card have been removed from the machine, so the machine is being sold as defective. It is otherwise in very good condition Technical data: Pump hours: 61,400 Clamping force: 1600 kN Clear column spacing: 470*470 Ejector travel: 225 mm Cgob Hawbov Edrio Aot Screw diameter: 50 mm Displacement: 398 cm³ Dimensions: 4335*1635*1950 mm Weight: 6950 kg The machine is offered without peripherals Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit us on our website

Condition: like new (used), Year of construction: 2019, Krauss Maffei KM 300-2000 CX- Hybryd injection molding machine Year of production -2019 Number of operating hours - 19,000 Fully hydraulic closing system. MC 6 control system based on an industrial computer in real-time Ethernet technology, equipped with an integrated 19" control panel with a color touch screen. Plasticizing system complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 70 mm, with a non-return lock and an open nozzle Closing unit - Mold closing force: kN 3000 - Mold opening force: kN 169 - Dimensions of the mounting plate (h x v): mm995 x 1050 - Clearance between columns (h x v): mm630 x 630 Increased width of the mold mounting plates and increased horizontal clearance between columns KM 300 by 80 mm; Clearance after enlargement: 710 x 630 mm ( h x v) - Mold opening stroke: mm820 - Minimum height mold:mm330 Increased by 150 mm min. mold height and max. opening width - Opening width: mm1150 - Ejector stroke: mm200 - Ejector force forward/backward: kN 58/28 Injection unit - Screw diameter:mm 70 Thermoplastic HPS-UN screw for high-performance applications - 70 mm Screw drive by electric motor for independent and energy-saving plasticization during mold opening and closing - Ls/D ratio: -20.0 - Injection pressure:bar 1877 - Injection volume:cm3 1078 - Injection weight 1): g 981 - Injection speed: mm/s100 - Injection efficiency:cm3/s385 - Screw speed, standard:rpm220 - Efficiency plasticization 1): - at standard screw speed: g/s 75.8 Pressure tank for increased injection power switched off by machine control Additional pump for hydraulic ejector and core function. For parallel movements of hydraulic elements during mold opening and closing, as well as pressure maintenance function for hydraulic cores. Cob Hjwa S Imjawb Asgt Electric-hydraulic equipment - Nominal power of the pump motor:kW 55 - Installed power of the heaters:kW 29.2 - Number of cylinder heating zones: -6 - Dry cycle time / stroke according to Euromap 6 2) :s/mm 2.7 / 441 - Oil tank capacity: dm3 720 Dimensions and weight - Net weight with control cabinet: t 20.1 - Machine dimensions (length x width x height) 3):m 6.55 x 2.17 x 2.25

Condition: excellent (used), Year of construction: 2015, Clamping force: 180 t Screw diameter: 35 mm Shot volume: 154 cm3 Type: Horizontal Drive: Hydraulic Controll CC200 Engel Viper 40 Linear Robot Engel Rotofeeder BMC50 Cgebjvplycj Hawb Ajt Machine was using DUROPLAST MATERIAL has proportional valves for the cap, injection, ejector, 3 x cores and controlled 2 hydraulic servo pumps Approx 30.000 hours

Condition: excellent (used), Year of construction: 2006, clamping force: 800 kN, column diameter: 30 mm, 3 pcs of Very well maintained 2K machines from big Danish Manufacturer. Always maintained 100% Cgob Hjv Du U Ssawb Aet

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY 650/150 injection molding machine Year of manufacture - 2005 Clamping system Clamping force: 1500 kN Plate size h x v: 750 x 750 mm Min. installation height: 300 mm Maximum plate distance: 900 mm Opening stroke: 600 mm Ejector stroke: 150 mm Ejector force: 61 kN Centring of moving platen D: 160 mm Centring of fixed platen D: 160 mm Mould weight: 1800 kg Injection system Screw diameter: 45 mm Stroke volume: 318 ccm Injection pressure: 1525 bar Screw length: 20 l/d Screw stroke: 200 mm Csb Hawswa S Dzsb Ajgt Screw speed: 290 min Screw torque: 5 N Plasticizing flow: 55 g/s PS Number of heating zones: 5 Dimensions and weight Machine dimensions LxWxH: 5.5m x 1.7m x 2.4m Total weight: 9500 kg

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 35 - 100 CX injection molding machine Year of manufacture - 2007 Closing system : Clamping force: 350 kN Mould opening force, max.: 39.9 kN Moving platen feed force Opening: 21.6 kN Moving platen feed force Closing: 16.7 kN Mould platen size (h x v): 540 mm x 540 mm Distance between connecting rods (h x v): 320 mm x 320 mm Mould opening stroke: 350 mm Min. mould height: 175 mm Max. daylight: 525 mm Hydraulic ejector - stroke: 100 mm Ejector force forward/backward: 22.6 / 9.9 kN Injection unit : Screw diameter: 22mm Ls/D ratio: 26 Injection pressure: 2500 bar Injection volume 38 ccm Injection weight, PS: 35 g Injection speed: 59 ccm/s Screw speed: 365 1/min Tank capacity: 215 ltr. Cgjbowa Szgs Hawb Aet Dimensions and weight Machine dimensions: 3.50 m x 1.50 m x 2.00 m

Condition: excellent (used), Year of construction: 2004, Arburg 420C 1000-250 injection molding machine Year of production: 2004 Injection elements: Screw diameter: 40 mm Injection weight: 158 g Injection pressure: 1390 bar Injection volume: 188 ccm Closing elements: Closing force: 100 t Clearance between columns: 420x420 mm Table plate dimensions max: 570x570 mm Ejector: hydraulic Closing system: hydraulic Control: SELOGICA Dimensions: Weight: 3660 kg Length/Width/Height: 4.30x1.64x2.08 m Cjb Hawewa Sx Eeb Ajgt

Condition: excellent (used), Year of construction: 2005, Krauss Maffei KM 160-380 CX injection molding machine Year of production - 2005 Number of operating hours - 34,200 Fully hydraulic closing system. MC5 control system with color monitor, integrated control panel and 3 built-in USB ports. Plasticizing system A complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 40 mm, with a non-return lock and an open nozzle TECHNICAL DATA OF THE MACHINE IN STANDARD VERSION Closing unit - Mold closing force: kN 1600 - Mold opening force: kN 86.4 - Dimensions of the mounting plate (h x v): mm 820 x 845 - Clearance between columns (h x v): mm 520 x 520 - Mold opening path: mm 650 - Mold installation height: mm 300 - Plate opening stroke: mm 950 - Ejector stroke: mm 150 - Ejector force: kN 22.6/9.9 Injection unit - Screw diameter: mm 40 - Pressure injection: bar 1860 - Injection volume: cm3 201 - Injection weight for PS: g 183 - Number of screw revolutions, standard, option: rpm 390/490 Cgob Hswa Svksawb Ast Electric-hydraulic equipment - Nominal power of the pump motor: kW 22 - Installed power of heaters: kW 10.97 - Number of cylinder heating zones: - 5 - Number of dry cycles according to Euromap: 1/h 1600 - Oil tank capacity: l 489 Dimensions and weight - Net weight with control cabinet: t 6.0 - Machine dimensions (length x width x height): m 4.6 x 1.6 x 2.1

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 50-380 CX injection molding machine Year of production - 2010 Number of operating hours -: 62135 Fully hydraulic closing system. MC5 control system with color monitor, integrated control panel and built-in 3 USB ports. Plasticizing system complete plasticizing system for thermoplastics in the version with abrasive protection, with a screw diameter of 35 mm, with a non-return lock and an open nozzle Tool closing system: - Mold closing force: kN 500 - Mold opening force: kN 39.9 - Mould mounting plate movement force - - -- opening: kN 21.6 -- closing: kN 16.7 - Mounting plate dimensions (h x v): mm 600 x 600 - Clearance between columns (h x v): mm 370 x 370 - Mold opening path: mm 400 - Mold installation height: mm 200 - Plate opening stroke: mm 600 - Ejector stroke: mm 100 - Ejector force: kN 22.6/9.9 Unit injection - Screw diameter: mm 35 Cob Hawswa Si Dob Aogt - Injection pressure: bar 2429 - Injection volume: cm3 154 - Injection weight for PS: g 140 - Screw speed, standard, option: rpm 295/375 Equipment: - Number of cylinder heating zones: - 5 - Number of dry cycles according to Euromap: 1/h 2900 - Oil tank capacity: 1 220 Power supply: - Nominal power of the pump motor: kW 15 - Installed power of the heaters: kW 10.97 Machine dimensions and weight: - Net weight with control cabinet: t 3.0 - Machine dimensions (length x width x height): m 3.8 x 1.4 x 2.0

Condition: excellent (used), Year of construction: 2005, BOY 22A injection molding machine Year of production: 2005 Vertical / horizontal machine Technical data Screw diameter: 22 mm Injection volume: 30 ccm Weight: 28.45 g Injection pressure: 1732 bar Closing force: 220 kN Tie bar spacing: 254 mm Plate size: 220 x 400 mm Min mold height: 200 mm Opening stroke: 200 mm Max plate spacing: 400 mm Cgob Howa Sbyoawb Aot General Installed power: 9.05 kW Operating hours: 21,600 h Dimensions: Weight: 880 kg Equipment Monitor language: German

Condition: excellent (used), Year of construction: 2003, Arburg 221 K 350 - 100 injection molding machine Year of manufacture: 12/2003 Horizontal/vertical machine - stand-up unit Control type: Selogica Closing system: Knee TECHNICAL DATA Closing force: 350 kN Clearance between columns: 221 mm Plate dimensions: 324 mm x 250 mm Mould size: min 150 mm - 300 mm Maximum opening stroke: 200 mm Max distance between plates: 350 mm - 500 mm Screw diameter: 20 mm Injection volume / Injection weight: 31 ccm / 26 grams PS Injection pressure: 2400 bar GENERAL DATA Engine: 7.5 kW Heaters: 3.5 kW Ceb Hawbewa R T Io Ajgt Operating hours: approx. 47,000 h Dimensions L x W x H: 2.7 m x 1.4 m x 1.7 m Weight: 1150 kg

Condition: excellent (used), Year of construction: 2016, ENGEL Duo 4550/500 WPX injection molding machine Year of production - 2016 Cgeb Hawswa Ebmob Ajt Viper 40 robot CC 300 control Closing system: Tie bar spacing - 990/1130 mm Min/max mold height - 450/1140 mm Opening stroke - 1400 mm Injection system: Closing force - 5000 kN Injection pressure - 1600 bar Screw diameter - 105 mm Injection volume - 3377 ccm Injection weight - 3073 g Core - 4 pieces on fixed plate Core - 4 pieces on fixed plate Pneumatic cascades - 10 pieces Hot runner control 40 zones

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 450 - 3500 C3 Sprinter injection machine Year of manufacture - 2008 Fully hydraulic two-platen clamping system. MC 4 control system with color monitor, integrated control panel, and built-in disk station Plasticizing system Complete HPS-UN plasticizing system for thermoplastics with a screw diameter of 90 mm. TECHNICAL DATA Closing unit - Closing force of mold: kN 4500 - Opening force of mold: kN 280 - Moving force of the moving plate fixing the mold - -. -- opening: kN 137 -- closing: kN 116 - Dimensions of clamping plate (h x v): mm 1270 x 1200 - Clearance between columns (h x v): mm 900 x 800 - Opening path of the mold: mm 1170 - Installation height of the mold: mm 480 Cgob Hawsq Nlzhjb Aet - Opening width: mm 1650 - Ejector stroke: mm 250 - Ejector force: kN 95/48 Injection unit - Auger diameter: mm 90 Auger drive by electric motor with increasing drive force. For independent and energy-saving plasticization for opening and closing - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection weight for PS: g 1777 - Screw speed, standard, optional: rpm 149/247 - Injection capacity cm3/s 3817 - Injection capacity at: -- standard screw speed: g/s 103 -- increased screw speed: g/s 152 Electric-hydraulic equipment - Rated power of pump motor: kW 90 - Drive power of auger (electr.) kW 88 - Installed power of heaters: kW 59 - Number of cylinder heating zones: - 9 - Dry cycle time according to Euromap: 1/h 1400 - Oil tank capacity: l 1075 Weight and dimensions - Net weight with control cabinet: t 26.3 - Dimensions of foundation space (L x W x H): m 7.98 x 2.35 x 2.51

Condition: ready for operation (used), Year of construction: 2012, Haitian Mars 4700/2250 injection molding machine Year of production -2012 Wittmann W 832-2012 robot X axis -900 mm Y axis -1600 mm Z axis -3000 mm Closing system: Clearance between columns - 800/820 mm Min/max mold height -320/780 mm Opening stroke - 1560 mm Injection system: Closing force - 4700 kN Injection pressure - 2110 bar Cgsbswa Dr Do Hawb Ajt Screw diameter - 65 mm Injection volume - 1068 ccm Injection weight -972 g Equipment: 2x core - moving plate