Year of construction: 2002, Condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Dslragoum U S Eok Iscg

Condition: repair required (used), Year of construction: 2006, Functionality: limited functionality, clamping force: 2,200 kN, Equipment: documentation/manual, For sale is an Engel Victory 1350/220 Tech from 2006. The machine is currently in need of repair as the hydraulic pump needs to be replaced. An offer for the repair from the original manufacturer Engel is available, with a cost estimate of approx. 20,000 €. Apart from this defect, the machine is in very good condition and has always been well maintained. Additional information: Viewing possible by appointment. Dslovkgdljragk Ijcg The offer for the repair can be viewed on request.

Condition: excellent (used), Year of construction: 2006, operating hours: 15,070 h, clamping force: 900 kN, screw diameter: 42 mm, injection pressure: 1,724 bar, injection weight: 193 g, BOY 90A (102) without hopper General information Product Code: 102 Availability: In Stock Year of production: 2006 Dolevuqncsragk Iecg Brand: Boy Technical data Shot Weight: 193 g Clamping Force: 900 kN Screw dia: 42 mm Injection pressure: 1724 bar Tie bar distance: 430x360 mm Platen size: 635x610 mm Mould height min.: 250 mm Type of controls: Procan CT Language: German Power: 26,3 kW Workinghours: 15070 h Weight: 3100 kg Dimensions: 4,9x1,2x2,1 m Hopper: No

Condition: excellent (used), Year of construction: 2003, Engel VC750/150 , tiebarless machine Controll panel: CC100 Clamping force: 150 t Plate dimensions: 750x520 mm Opening Stroke: 605mm Screw dia: 50 mm Dslragevi Rzrek Iscg Max. swept wolume 393 cm3 Injection rate: 283 cm3/s Injection pressure: 1439 bar Nozzle stroke 350 mm Working hours only: 38987 Weight 9100 kg L 5200 x W 1700 x H 2000 mm 2x core pull Condition: fully funtional Videos on request.

Condition: like new (used), Year of construction: 2022, Engel duo 17060/2000 injection molding machine Year of production -2022 Robot viper 60 - RC300 integrated Z= 4280 mm X= 1800 mm Y= 2600 mm Injection system Screw diameter mm 135 Screw pitch mm 610 Maximum injection capacity cm³ 8731 Screw speed min⁻¹ 125 Screw torque Nm 14000 Maximum screw speed at reduced torque min⁻¹ 135 Reduced torque at max. speed Nm 12963 Reduced screw speed at max. torque min⁻¹ 112 Maximum screw torque at reduced speed Nm 15630 Regeneration efficiency (3-zone screw) g/s 222.9 Regeneration efficiency (barrier screw) g/s 279.2 Injection Injection efficiency cm³/s 1904 Injection volume cm3 8731 Injection weight g 7860 Injection pressure (regeneration) bar 1648 Injection pressure (maximum) bar 2000 Nozzle Nozzle stroke mm 1100 Nozzle pressure force kN 210 Material cylinder L/D ratio - 25 Heating zones (including nozzle) - 8 Dcelrasv Iz Umegk Ieg Heating power kWel 88.5 Closing system Closing force kN 20000 Minimum closing force kN 2000 Opening force (with pressure cushion) kN 1600 Force opening kN 614 Opening stroke mm 3000 Max. distance between platens mm 3800 Min. mould height mm 800 Max. mould height mm 1800 Spacing between tie bars (h x v) mm x mm 2000 x 1600 Size of mould plates (h x v) mm x mm 2700 x 2430 Max. mould weight (moving platen) kg 41330 Max. mould weight (stationary platen) kg 41330 Max. total mould weight kg 62000 Dry cycle stroke (Euromap 6) mm 1400 Dry cycle time (Euromap 6) s 5.5 Ejector Ejector stroke mm 400 Ejector force kN 385 Drive Installed power of main motors kW 265 Capacity oil tank (injection unit) l 1600 Oil filter Max. cooling capacity (at 25°C) kWcool 43.2 Water consumption (at 25°C) m³/h 6.3

Year of construction: 1997, Condition: ready for operation (used), Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible. Djlrasrc Hibsgk Iecg

Condition: excellent (used), Year of construction: 2009, operating hours: 36,000 h, clamping force: 1,000 kN, screw diameter: 40 mm, injection pressure: 2,000 bar, injection weight: 198 g, Engel E-max 440-100 (216) General information Product Code: 216 Availability: In Stock Year of production: 2009 Brand: Engel Dcelragsvuptkok Ieg Technical data Shot Weight: 198 g Clamping Force: 1,000 kN Condition: Used Screw dia: 40 mm Injection pressure: 2000 bar Tie bar distance: 410 x 460 mm Platen size: 650 x 600 mm Mould height min.: 150 mm Type of controls: LC 200 Language: English,Swedish Power: 18 kW Workinghours: 36000 h Weight: 4400 kg Dimensions: 4,7 x 1,3 m Hopper: No Euromap: Yes Air valve: Yes

Condition: like new (used), Year of construction: 2017, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Dslrageu Epy Njk Iecg Injection pressure: 2.000 bar Working hours: 12.500 h

Year of construction: 2009, Condition: ready for operation (used), Clamping force: 1000kN, column distance X/Y: 420mm/420mm, mold height min./max.: 200mm/800mm, platen size X/Y: 620mm/620mm. Screw diameter D25/D35: 25mm/35mm, max. injection volume D25/D35: 90cm³/173cm³, max. injection pressure: 2500bar, injection speed: 160mm/s. Including various accessories, including D25 and D35 units. Dimensions X/Y/Z: approx. 4500mm/2200mm/1700mm, weight: approx. 5300kg, control: Arburg Selogica, operating hours: 1798h. Documentation available. Dolragkjtthr No Iscg

Condition: excellent (used), Year of construction: 2004, clamping force: 1,300 kN, screw diameter: 50 mm, injection pressure: 1,360 bar, injection weight: 243 g, Arburg 420C-1300-350 (172) the machine is sold without conveyor belt Product Code: 172 Availability: In Stock Year of production: 2004 Brand: Arburg Technical data Shot Weight: 243 g Clamping Force: 1,300 kN Screw dia: 50 mm Injection pressure: 1360 bar Tie bar distance: 420 x 420 mm Platen size: 605x605 mm Mould height min.: 250 mm Type of controls: Selogica Language: German Power: 32,2 kW Workinghours: 81.110 h Weight: 4080 kg Dcelrjvupq Aoagk Ijg Dimensions: 4,4x1,9 m Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes

Condition: excellent (used), Year of construction: 2006, Clamping force: 500 t Screw diameter: 80 mm Dcslragkeva H Amo Isg Platten dimensions: 1300 x 1200 mm Distance between tie bars V: 900 mm Distance between tie bars H: 900 mm Shot volume: 1779 cm3 Shot weight: 1620 g Injection pressure: 1855 bar Working hours: 46.511 Type: Horizontal Drive: Hydraulic

Year of construction: 1999, Condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Dceljilhfcoragk Ieg

Condition: like new (used), Year of construction: 2017, Clamping unit: 50 ton Oppening stroke (max. kN/mm) : 30 / 250 Mould height (fixed/variable) min.-max. mm: ---/172/272 Platen daylight (fixed/variable) max. mm: ---/422-522 Shuttle table stroke: 650 mm Screw diameter: 20 mm Injection volume: 31 cm3 Shot weight: 29 g Injection pressure: 2.500 bar Working hours: 19.719 Djlraou Ep Imsgk Iocg Equipment: 3x hot runner 1x hydraulic core puller 1x pneumatic core puller

Year of construction: 2019, Condition: ready for operation (used), Screw diameter: 30mm, clamping force: 50t, heating output: 11kW, weight: 2.9t, with documentation, an inspection is possible. Dcslrajrk Rxqogk Ieg

Condition: excellent (used), Year of construction: 2010, Engel Victory 80/50 Spex Clamping force: 50 ton Opening stroke: 400 mm Mould height Min-max: 200 mm Total daylight max. 600 mm Platen size: 500x450mm Mould weight max: 450kg Screw: 18mm screw Injection capacity: 25 cm3 Dcolragjuy Rmyok Iog Serial: 176053 + robot picker Engel USP (universal picker)

Year of construction: 2018, Condition: ready for operation (used), Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible. Dcelragjr N Rh Hek Ieg

Condition: good (used), Year of construction: 2001, Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Dslragksuwr Dhs Iscg Tie bar daylight: 221 mm Mould clamping plattens (b x h) : 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 30 mm Screw stroke: 100 mm Injection volume: 70 cm3 Shot weight: 59 g Injection pressure: 1040 bar Working hours: 40.882

Year of construction: 2016, Condition: ready for operation (used), A total of 9 partly dismantled Krauss Maffei injection molding machines are available. 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical parts. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical parts. All injection molding machines include robots from Kuka, Krauss Maffei, Sar, or Sepro. On-site inspection is possible. Dcjlragkougmx Aj Ieg

Condition: like new (used), Year of construction: 2013, Clamping force: 1100 t Dcjlragkevnmdmo Iog Screw diameter: 90 mm Distance between tie bars V: 1150 mm Distance between tie bars H: 1400 mm Shot volume: 3050 cm3 Type: Horizontal Drive: Hydraulic Machine has only 3500 hours used only for test production. CC200 controll Robot Linear

Year of construction: 1999, Condition: ready for operation (used), Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1500kN, screw diameter: 40mm, distance between tie bars: 420mm, injection volume: 182cm³, operating hours: 98234h. Documentation available. On-site inspection is possible. Dslrjt E Trheagk Iecg

Year of construction: 2009, Condition: ready for operation (used), There are 5 identical Engel injection molding machines available. Screw diameter: 2x 30mm/3x 35mm, clamping force: 80t, weight: approx. 4400kg. All machines including attachment crane. One Engel (Fig. 5) serves as a spare parts dispenser for the remaining 4 machines. Documentation available. On-site inspection is possible. Dslrou Afz Djagk Iscg

Year of construction: 2007, Condition: ready for operation (used), Clamping force: 400kN, min. installation height: 200mm, max. drive-up distance: 500mm, barrel diameter: 15mm, max. screw volume: 17cm³, number of core pulls: 2. Dcsljttbfboragk Ieg

Year of construction: 1998, Condition: ready for operation (used), Clamping force: 500kN, min. installation height: 200mm, max. drive-up distance: 550mm, barrel diameter: 25mm, max. screw volume: 47cm³, number of core pulls: 2. Available from Q4 2024. Djlettbfforagk Iscg

Year of construction: 1993, Condition: ready for operation (used), A total of six old injection molding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350kN, injection pressure: 1500bar, injection weight: 35g/hp, screw diameter: 22mm, centering bore: 110mm, mold opening stroke: 330mm, control: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700kN, screw diameter: 40mm, centering bore: 125mm, mold height min./max.: 190mm/420mm, tie bar distance X/Y: 305mm/135mm, mold opening stroke: 250mm, control: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700kN, injection pressure: 1500bar, injection weight: 117g/hp, screw diameter: 35mm, centering bore: 125mm, mould height min./max.: 200mm/400mm, tie bar distance: 305mm. 4) Arburg 221-75-350, year of construction: 1992, clamping force: 350kN, injection pressure: 1500bar, screw diameter: 22mm, centering bore: 110mm, mould height min./max.: 150mm/300mm, tie bar distance: 221mm. 5) Arburg 221-55-250, year of construction: 1991, clamping force: 250kN, injection weight: 32g/hp, screw diameter: 20mm, mold height min./max.: 150mm/300mm, tie bar distance: 320mm. 6) 2K injection molding machine Arburg 221-75-350, year of construction: 1993, clamping force: 350kN, injection pressure: 1500bar, injection weight: 38g/hp, screw diameter: 22mm, mold height min./max.: 150mm/300mm, tie bar distance: 221mm. Including 7-8 Arburg dryers, various injection units, compressor AirComp, mixing unit liquid-silicone with Arburg control and Scheugen plow. Documentation available. An on-site inspection is possible. Delrovb Hbfeagk Ijcg

Year of construction: 2010, Condition: ready for operation (used), There are 3 injection molding machines Arburg including handling robot Stäubli available. Arburg Allrounder 420C 1000-100, year of construction 2000, screw diameter 25mm, max. injection volume 49cm³, centering 125mm, control Selogica 3.060, operating hours 96839h. Including robot Stäubli RX130 CS7Bm, year of construction 2000. Arburg Allrounder 420C 1000-100, year of construction 2000, screw diameter 25mm, max. injection volume 49cm³, centering 125mm, control Selogica 3.060, operating hours 103227h. Including robot Stäubli RX130 CS7B, year of construction 2000. Arburg Allrounder 370S 700-100, year of construction 2010, screw diameter 15mm/20mm/25mm, centering 125mm, control Selogica direct 4.090, operating hours 49833h. Including robot Stäubli RX130 CS7B, year of manufacture 2000, documentation available. On-site inspection is possible. Individual sale possible. Dolragkeu St I Re Ijcg